This is information on a product in full production.
June 2012
Doc ID 13473 Rev 41/13
MJD31CT4-A
Low voltage NPN power transistor
Datasheet production data
Features
■This device is qualified for automotive
application
■Surface-mounting TO-252 power package in tape and reel
■
Complementary to the PNP type MJD32C
Application
■
General purpose linear and switching equipment
Description
The device is manufactured in planar technology with “base island” layout. The resulting transistor shows exceptional high gain performance coupled with very low saturation voltage.
Table 1.Device summary
Order code Marking Package Packaging MJD31CT4-A
MJD31C
DP AK
T ape and reel
https://www.wendangku.net/doc/506146564.html,
Electrical ratings MJD31CT4-A
2/13Doc ID 13473 Rev 4
1 Electrical ratings
Table 2.
Absolute maximum ratings
Symbol Parameter
Value Unit V CBO Collector-base voltage (I E = 0)100V V CEO Collector-emitter voltage (I B = 0) 100V V EBO Emitter-base voltage (I C = 0) 5V I C Collector current 3A I CM Collector peak current 5A I B Base current
1A P TOT Total dissipation at T c = 25 °C 15W T STG Storage temperature
-65 to 150°C T J
Max. operating junction temperature
150
°C
Table 3.
Thermal data
Symbol Parameter
Value Unit R thJC
Thermal resistance junction-case max
8.3°C/W R thJPCB (1)1.When mounted on FR-4 board of 1 inch2, 2 oz Cu.
Thermal resistance junction-pcb max
50
°C/W
MJD31CT4-A Electrical characteristics
Doc ID 13473 Rev 43/13
2 Electrical characteristics
T case = 25 °C unless otherwise specified.2.1 Electrical characteristic (curves)
Table 4.
Electrical characteristics
Symbol Parameter
Test conditions
Min.
Typ.Max.Unit I CES Collector cut-off current
(V BE = 0)
V CE = 100 V -20μA I CEO Collector cut-off current (I B = 0)
V CB = 60 V -50μA I EBO
Emitter cut-off current (I C = 0)
V EB = 5 V
-0.1
mA
V CEO(sus) (1)
1.Pulse test: pulse duration ≤ 300 μs, duty cycle ≤ 2 %
Collector-emitter sustaining voltage (I B = 0)
I C = 30 mA
100-V
V CE(sat) (1)Collector-emitter saturation voltage I C = 3 A _ I B = 375 mA - 1.2V V BE(on) (1)
Base-emitter on voltage I C = 3 A _ V CE = 4 V - 1.8V
h FE
DC current gain
I C = 1 A _ _ V CE = 4 V I C = 3 A V CE = 4 V
2510
-
50
Electrical characteristics
MJD31CT4-A
4/13Doc ID 13473 Rev 4
Figure 6.
Collector-emitter saturation
Figure 7.
Base-emitter saturation Figure 8.
Base-emitter on voltage Figure 9.
Resistive load switching time
MJD31CT4-A
Electrical characteristics
Doc ID 13473 Rev 45/13
2.2 Test circuits
1.Fast electronic switch
2.Non-inductive resistor
Figure 10.Resistive load switching time
Electrical characteristics MJD31CT4-A
1.Fast electronic switch
2.Non-inductive resistor
3.Fast recovery rectifier
6/13Doc ID 13473 Rev 4
MJD31CT4-A Package mechanical data 3 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOP ACK? packages, depending on their level of environmental compliance. ECOPACK?
specifications, grade definitions and product status are available at: https://www.wendangku.net/doc/506146564.html,.
ECOP ACK? is an ST trademark.
Doc ID 13473 Rev 47/13
Package mechanical data MJD31CT4-A
Table 5.DPAK (TO-252) mechanical data
mm
Dim.
Min.Typ.Max.
A 2.20 2.40
A10.90 1.10
A20.030.23
b0.640.90
b4 5.20 5.40
c0.450.60
c20.480.60
D 6.00 6.20
D1 5.10
E 6.40 6.60
E1 4.70
e 2.28
e1 4.40 4.60
H9.3510.10
L1 1.50
L1 2.80
L20.80
L40.601
R0.20
V20°8°
8/13Doc ID 13473 Rev 4
MJD31CT4-A Package mechanical data
Doc ID 13473 Rev 49/13
Package mechanical data MJD31CT4-A
10/13Doc ID 13473 Rev 4
(a)
Table 6.DPAK (TO-252) tape and reel mechanical data
Tape
Reel
Dim.mm
Dim.
mm
Min.
Max.Min.
Max.A0 6.87A 330
B010.4
10.6B 1.5B112.1
C 12.813.2
D 1.5 1.6
D 20.2D1 1.5G 16.418.4
E 1.65 1.85N 50
F 7.47.6T
22.4K0 2.55 2.75P0 3.9 4.1Base qty.2500P17.98.1Bulk qty.
2500
P2 1.9 2.1
R 40T 0.250.35W
15.7
16.3a.All dimensions are in millimeters
分销商库存信息: STM
MJD31CT4-A