CRYSTAL OSCILLATORS Data Sheet 0645A AB-X29NXXX Series
PECL/LVPECL UHF XO
Description
The AB-X29NXXX Series of crystal oscillators (XO) provides ultra high frequency with
PECL/LVPECL complementary outputs. The outputs can be disabled for test automation or combining multiple clocks. The device is based on low noise analog harmonic frequency multiplication, providing exceptionally low Phase Noise and Jitter. It’s packaged in a miniature, FR-4 based 9x14 mm SMD package
Applications and Features
?Fiber Channel; 10 GbE; Infiniband; Network Processors; SONET/SDH
?High Reliability – NEL HALT/HASS qualified for crystal oscillator start-up conditions ?Extremely Low Phase Noise and Jitter
?Frequency Range to 1,000 MHz
?RoHS compliant, Lead Free Construction
?SONET ± 20 ppm overall stability available
?High Shock Resistance, to 1.000 G
Creating a Part Number
CRYSTAL OSCILLATORS
Data Sheet 0645A
Environmental and Mechanical Characteristics
Operating temp. range
see part # table
Mechanical Shock Per MIL-STD-202, Method 213, Cond. A Thermal Shock Per MIL-STD-883, Method 1011, Cond. A Vibration Per MIL-STD-883, Method 2007, Cond. A
Hermetic Seal Leak rate less than 1x10-8 https://www.wendangku.net/doc/5512562258.html,/s of helium , crystal only. Soldering conditions
See MAX reflow profile below
MAX Reflow Profile
CRYSTAL OSCILLATORS
Data Sheet 0645A
AB-X29NXXX Series
Absolute Maximum Ratings
Parameter Symbol Value Unit
Operating Temperature Range To -40 to +85 oC Storage Temperature Range Tst -50 to +90 oC Supply Voltage
Vcc -0.5 to 5.5 V Enable/Disable Voltage
Ven/dis
0 to Vcc
V
Electrical Parameters
Parameter Symb Conditions, Note MIN TYP MAX Unit
Nominal Frequency Fo
200 1,000 MHz Supply Voltage Vcc Code 0 Code A 4.75 3.135 5.0 3.3 5.25 3.465 V Supply current Icc 60 80 mA Output Logic Type
PECL/ LVPECL
Load Output to Vcc-2V, or
Thevenin Equivalent
50 Ohm
Output Levels Voh Vol overall Vcc-1.025 Vcc-1.620
V
Duty Cycle (Symmetry)
At 50% of output voltage swing
45/55 50/50 55/45 % Rise/Fall Time
Tr/Tf 20 to 80, 80 to 20 % 0.5 0.7 ns Integrated from Phase Noise, 12 KHz to 20 MHz , RMS
0.1 0.2 ps
100Hz to 80KHz,RMS 1.0 ps Integrated 50 KHz to 80 MHz 0.3 ps
Random period, 2.5
ps Accumul., pk-to-pk
25 ps Jitter
Wavecrest characterized J Determin. 1 ps
Phase Noise £(Δf) 622.080MHz APR 50 ppm or less @ 10 Hz @100 Hz @1 KHz @10KHz @100KHz @>1MHz -60 -90 -118 -135 -140 -145 -55
-85 -113
-130 -135 -140
dBc/Hz Sub-harmonics At 622.08 MHz -50 -46
dBc Frequency Stability ΔF/F Overall, including initial calibration, temperature, aging 10 years, shock and vibration From ±20,
see table for part number
ppm Enable Pin 2 = Low, 0 to Vcc-1.62 V
Enabled
V Disable Pin 2 = High, Vcc-1.025 V to Vcc Disabled, Pin4 = Logic “1”,
Pin5 = Logic “0”
V