紧固件中英文对照表(Terminology for fastener)

非金属嵌件六角锁紧螺母

Prevailing torque type hexagon nuts(with non-metallic insert)

六角开槽螺母

Hexagon slotted nuts

六角开槽螺母细牙

Hexagon slotted and castle nuts-Fine pitch thread

六角螺母

Hexagon nuts

六角螺母－细牙

Hexagon nuts-Fine pitch thread

全金属六角锁紧螺母

Prevailing torque type all-metal hexagon nuts

120度半沉头铆钉

120degree oval countersunk rivets

120度沉头半空心铆钉

120 degree countersunk head semi-tubular rivets

120度沉头铆钉

120 degree countersunk head rivets

T形槽用螺栓

Bolts for T-Slot

鞍形弹簧垫圈

Curved single coil spring lock washers

鞍形弹性垫圈Curved spring washers

半圆头带榫螺栓Cup head nib bolts

半圆头低方颈螺栓

Cup square neck bolts with short neck

半圆头方颈螺栓

Cup head square neck bolts

半圆头铆钉

Round head rivets

扁平头铆钉

Thin head rivets

扁圆头半空心铆钉Oval head semi-tubular rivets

扁圆头铆钉

Flat round head rivets

标牌铆钉

Rivets for name plate

标准型弹簧垫圈

Single coil spring lock washers, Normal type

波形弹簧垫圈

Wave single coil spring lock washers

波形弹性垫圈

Wave spring washers

槽钢用方斜垫圈

Square taper washers for slot section

槽销

Grooved pins

侧面带孔圆螺母

Round nuts with set pin holes in side

沉头半空心铆钉Countersunk head semi-tublar rivets

沉头带榫螺栓

Flat countersunk nib bolts

沉头方颈螺栓

Flat countersunk square neck bolts

沉头铆钉

Countersunk head rivets

沉头双榫螺栓

Flat countersunk double nib bolts

大半圆头带榫螺栓

Cup head nib bolts with large head

大半圆头方颈螺栓

Cup head square neck bolts with large head

大扁圆头半空心铆钉

Truss head semi-tubuar rivets

大扁圆头铆钉Truss head rivets

带槽圆螺母Slotted round nuts

带孔销

Pins with split pin hole

带锁圈的螺钉锁紧挡圈Lock rings with screw and circlip

单耳止动垫圈

Tab washers with log tab

弹性圆柱销

Spring-type straight pins-Slotted

等长双头螺柱

Double end studs

地脚螺栓Eyelet bolts

吊环螺钉Eyebolts

蝶形螺母

Wing nuts

端面带孔圆螺母

Round nuts with drilled holes in one face

方螺母

Square nuts

方头凹端紧定螺钉Square set screws with cup point