常用術語英文縮寫的參考意思工程部制作
英文縮寫
中文意思英文全寫AQL
允收品質水准Acceptable Quality Limit BOM
物料清單Bill of Material BCC
密秘附本抄送(電郵)Blind Carbon Copy CMM
3D觸測測量儀Coordinate-measuring Machine CAR
改善措施報告Corrective Action Report C/A
改善措施Corrective Action CIP
持續改善計劃Continuous Improvement Plan CC
附本抄送(電郵)carbon copy cav.
模具穴號Cavity COC
材質保証書Certificate of Compliance CNC
電腦鑼Computer Numerical Control CAD
計算機輔助設計Computer-aided Design CTI
第三方材質驗証機構DCC
文件管理中心Document Control Center DMS
文件管理系統Document Management System DFM
設計模擬工序Design for Manufacture EN
工程通知Engineering Notice ECN
工程變更通知Engineering Change Notice FAI
首件檢查First Article Inspection FYI
供參考For Your Information FAR
不良分析報告Failure Analysis Report FA
不良分析Failure Analysis GR&R
基子量測系統可靠性分析Gauge Repeatability and Reproducibility GO
通過或可接受Go IQC
進料品質管控Incoming Quality Control PQC
制程品質控制Process Quality Control QA
品質保證Quality Assurance LSL
規格下限Lower Specification Limit LCL
控制下限Lower Control Limit USL
規格上限Upper Specification Limit UCL
控制上限Upper Control Limit OQC
出貨品質管控Outgoing Quality Control OMM
2D光學測量儀On Machine Measurement SPC
統計製程控制Statistical Process Control SIP
標準檢察工序Standard Inspection Procedure TQM
全面質量管理Total Quality Management TQC
全面質量管理Total Quality Control 8D Report
品質不良8原則Eight Disciplines Problem Solving 5C Report
品質不良5原則R&D
研究與開發Researcg and Development PMP
項目管理計劃Project Management Plan PD
產品設計Product Design SGS
材質保証書Société Générale de Surveillance RoHs
危害性物質限制指令PO
訂單Purchase Order SOP
標准作業程序Standard Operating Procedure NG
不合格No-Go PFC
工序流程表Process flow Chart PFD
工序流程圖Process flow Diagram Qty
數量quantity RTV
退回廠商Return To Vendor S
小號small M
中號medium L
大號large XL
加大號extra-large ORT
產品可靠性測試Ongoing Reliability Test kgf
千克力Kilogram-force PDF 便攜式文件格式Portable Document Format Restriction of Hazardous Substances Directive