Applications
I Switch-mode power supplies
Features
I Useable in series connections up to 265 V rms I Coated thermistor disk
I Kinked leads of tinned copper wire I Wide resistance range I UL approval (E69802)
Options
Resistance tolerance < 20 % available on request Delivery mode
Bulk (standard),
cardboard tape, reeled or in Ammo pack
Climatic category (IEC 60068-1)Max. power at 25°C P max Resistance tolerance ?R N /R N Rated temperature T N B value tolerance
?B /B Dissipation factor (in air)
δth Thermal cooling time constant (in air)τc Heat capacity
C th
55/170/562,1± 20 %25± 3 %
approx. 10approx. 70approx. 700
W
°C mW/K s mJ/K
R 25
?I max (0 … 65 °C)A No. of R /T char-acteristic B 25/100K C T 1)230 V μ
F C T 1)110 V μF Parameters for
R(I)1)Ordering code
k n 2,55,5120127002008000,621– 1,27B57236S0259M0005,04,51202280030012000,761– 1,30B57236S0509M000103,51203290030012000,942– 1,32B57236S0100M000123,21203290030012001,00– 1,32B57236S0120M000162,91207296530012001,08– 1,33B57236S0160M000202,81208306530012001,13– 1,34B57236S0200M000252,51208306530012001,22– 1,34B57236S0250M000501,91209316530012001,44– 1,38B57236S0500M00080
1,6
1304
3300
400
1600
1,64
– 1,37
B57236S0800M000
Dimensions in mm Approx. weight 1 g
1)For details on the capacitance C T as well as on the parameters k and n refer to “Application Notes ”, pages 40–42.
B57236Inrush Current Limiters S 236
Reliability data
Test Standard Test conditions?R25/R25
(typical)
Remarks
Storage in dry heat IEC
60068-2-2
Storage at upper
category temperature
T: 170 °C
t: 1000 h
< 10 %No visible
damage
Storage in damp heat, steady state IEC
60068-2-3
Temperature of air: 40 °C
Relative humidity of air: 93 %
Duration: 21 days
< 5 %No visible
damage
Rapid temperature cycling IEC
60068-2-14
Lower test temperature: – 55 °C
Upper test temperature: 170 °C
Number of cycles: 10
< 10 %No visible
damage
Endurance I = I max
t: 1000 h < 10 %No visible
damage
Cyclic endurance I = I max, 1000 cycles
On-time = 1 min
Cooling time = 6 min
< 10 %No visible
damage
Transient load Capacitance = C T
Number of cycles: 1000
< 5 %No visible
damage
B57236
Inrush Current Limiters
S236
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 801709, 81617 München, DEUTSCHLAND
( ++49 89 636 09, FAX (089) 636-2 2689
EPCOS AG 2002. Vervielf?ltigung, Ver?ffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne aus-drückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elek-troindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Lieferm?glichkeiten richten Sie bitte an den Ihnen n?chstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k?nnen aufgrund technischer Erfordernisse Gefahrstoffe ent-halten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zust?ndige Vertriebsgesellschaft ein-zuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
( ++49 89 636 09, FAX (089) 636-2 2689
EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representa-tives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.