HIF3BB-64DA-2.54R中文资料

Ribbon Cable connector Compliant with MIL Standard HIF3B Series

s Features Array

1. Product Compliant with MIL Standard

HIF3B series has been developed as a product compliant with MIL

standard, and used for wide applications.

2. UL Approval Product

HIF3B series connectors are UL approved.

3. Mechanism to Prevent Mis-insertion

This connector is equipped with the mechanism to prevent Mis-

insertion as follows.

1The system provides the convex area to insert the guide-key on the

pin header side, and to guide it in combination with the socket

convex area (MIL standard).

2The system embeds and guides the polarizing key in the socket holes.

4. Applicable Cable AWG#28

The applicable cable is UL2651 AWG#28 flat cable (7 cores./

0.127mm, jacket dia. 0.9±0.1mm).

s Product Specifications

s Ordering Information

q Socket

HIF 3B - * D A - 2.54 R

e t y u

q w r

q Series Name: HIF

w Series No.: 3B, 3BA, 3BB (50, 60, 64 contacts only)

e Number o

f contacts: 16, 20, 26, 30, 34, 40, 50, 60, 64

r Contact alignment: D : Double

t A: VA type

y Contact pitch: 2.54mm

u Connection type

R: ID type

q Pin Header

HIF 3B - *P A - 2.54 DS

e t y u

q w r

q Series Name: HIF

w Series No.:

3B: (14 contacts not included)3BC: (10 contacts only)

3BA, 3BB: (50, 60, 64 contacts only)3BD: (10 contacts only)

e Number o

f contacts: 16, 20, 26, 30, 34, 40, 50, 60, 64

r P: Pin header

t A: Selective gold plated

y Contact pitch: 2.54mm

u Contact style

DS: Right angle type

DSA: Straight type

s Socket (With guide to prevent mis-insertion)

Unit:mm

Note1, Note2: The number of polarizing keys and polarizing keyways changes according to products. Refer to the list as shown below.Note3: The 50, 60 and 64 contact connector contain two types of polarizing guides. Use the products, referring to Notes 1 and 2.Note4: The 6 contact has no polarizing mark.

Body Protector Clamp

s Socket with Withdrawal Tab

Unit : mm

s

Socket

Note1: The number of polarizing keys and polarizing keyways changes according to products. For details, refer to the list as shown below.

Note2: The 6 contact has no polarizing mark.

Body Protector Clamp

Unit:mm

The products marked with 5comply with MIL standard.

B

PCB mounting pattern

Note 1, Note 2: The number of polarizing slot and key installed positions

changes according to products. Refer to the list as shown below.

Note 3: The spacer moves to the right according to the number of

contacts.

Note 4: The 10, 50, 60 and 64 contact connectors contain two types of

polarizing slots.

Use products, referring to (Note 1) (Note 2).

s n=number of contacts

Unit:mm

The products marked with 5comply with MIL standard.

B

PCB mounting pattern

Note 1, Note 2: The number of polarizing slot and key installed positions

changes according to products. Refer to the list as shown below.

Note 3: The spacer moves to the right according to the number of

contacts.

Note 4: The 10, 50, 60 and 64 contact connectors contain two types of

polarizing slots.

Use products, confirming (Note 1) (Note 2).

Note 5: The 6 contact has no polarity mark.

s n=number of contacts

Unit:mm

The products marked with 5comply with MIL standard.

s Three Wall Angle Type

B

PCB mounting pattern

Note 1, Note 2: The number of polarizing slot and key installed positions

changes according to products. Refer to the list as shown below.

Note 3: The spacer moves according to the number of contacts.Note 4: The 10 contact connector consists of two types.

Use products, confirming (Note 1) (Note 2).

Note 5: The 6 contact has no polarity mark.

Note 6: The nut built-in specification product is also provided.

The product can be fixed by M2 screws from the rear https://www.wendangku.net/doc/605275646.html,e the screw of (board thickness) +4 mm under the neck.

s n=number of contacts

Unit:mm

The products marked with 5comply with MIL standard.

s Three Wall Straight Through hole

B

PCB mounting pattern

Note1,Note2: The number of polarizing slot and key installed positions

changes according to products. Refer to the list as shown below.

Note3: The spacer moves to the right according to the number of

contacts.

Note4: The 10 contact connector consists of two types.

Use products, referring to (Note 1) and (Note 2).

Note5: The 6 contact has no polarity mark.

s n=number of contacts

Unit:mm

The products marked with 5comply with MIL standard.

s Four Wall Wrapping Type

B

PCB mounting pattern

Note 1, Note 2. The number of polarizing slot and key installed positions

changes according to products. Refer to the list as shown below.

Note 3. The spacer moves to the right according to the number of

contacts.

Note 4. The 10, 50, 60 and 64 contact connectors consists of two types.

Use products, confirming (Note 1) (Note 2).

Note 5. The mark *indicates the number of contacts.

Note 6. The nut built-in specification product is also provided.

The product can be fixed by M2 screws from the rear https://www.wendangku.net/doc/605275646.html,e the screw of (board thickness) +4 mm under the neck.

s n=number of contacts

Unit:mm

The products marked with 5comply with MIL standard.

s Four Wall Straight Through hole [Flux Blister Prevention Type ]

B

PCB mounting pattern

Note1: The number of polarizing slot and key installed positions changes

according to products. Refer to the list as shown below.

s n=number of contacts

Unit:mm

The products marked with 5comply with MIL standard.

Two Stage Staking Right Angle Through hole

s

Note 3: The spacer moves to the right according to the number of contacts.

Note 4: The 10, 50, 60 and 64 contact connectors consists of two types.

Use products, confirming (Note 1) (Note 2).

Note 5: The mark *ndicates the number of contacts.

Note 6: The locator is located optionally.

Unit:mm

The products marked with 5comply with MIL standard.

B

Combination Pattern

B

PCB mounting pattern

s

Mounting Hole Spacer

Note : Fix the HIF3-mounting hole spacer by screws between upper stage and lower stage connectors.

Note : 2 pieces are contained in a bag.

B

Polarizing Key

Note1: One unit of this

product is a set of five pieces in conjunction with a runner. The unit for sale is defined one pack containing 20pieces.

Note2: This product is

applicable to the HIF3BA-*D2.54R product.

HIF3-GPIN(A)HIF3BA-GPIN

Note1: One unit of this

product is a set of five pieces in conjunction with a runner. The unit for sale is defined one pack containing 20pieces.

Note2: This product is

applicable to HIF3A-*D2.54R, HIF3C-*D2.54C and HIF3BA-*D2.54C products.

HIF3B-GK CL562-0601-8

B HIF3-Multi Clamp B HIF3-*CL Pull Tab

q Low Profile Lock Pin Header

B Lock

q F Type Lock Pin Header

This clamp is used for intermediate connection in the bus-line system, etc. Remove compulsory force from the insulation displacement area of the connector in intermediate connection.

Note: The pin header corresponds to the HIF3BAE

series (lock E).

This pull tab is used for the HIF3 series equipped with cable clamp function. Remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction.Note: This HIF3-* Pull Tab can not be used for HIF3BA-*PD.Note: The pin header corresponds to the HIF3BAE series (lock E).

27.3

21.5

s Socket for Crimping

Cover Case for Crimping socket

s

s Contact for Crimping Socket

B Tools

q Crimping Tool

Manual Crimping Tool HIF3-T2226HC

q Automatic Crimping Tool (Type: CM-105)

q Contact Extraction Tools How to use the extraction tool

(1) How to extract contacts

As shown in Figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed.

(2) How to adjust the lance (raise)In order to re-insert the contact removed from the insulated case,raise the contact lance area using the tool A, and re-insert the contact, as

shown in Figure 2.

Figure 1

Part Number HIF1-PO

CL No.550-0049-7

Note1: AP106-HIF3-22-28SCF and AP105-HIF3-22-28CFA can be modified by changing a few parts.