S212S02中文资料
S112S01 Series/S116S01 Series
S112S01 Series S116S01 Series
s Outline Dimensions (Unit :mm )
s Features
“In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,SIP Type SSR for Medium Power Control
(Ta =25?C )
s Electrical Characteristics
Parameter
Symbol Conditions
Input
Forward voltage V F I F =20mA Reverse current
I R V R =3V Output
Repetitive peak OFF-state current
I DRM V D =V DRM
S112S01 Series
V T I F =20mA, I T =12Arms S116S01 Series
I F =20mA, I T =16Arms
Holding current
I H V D =2/3?V
DRM
Critical rate of rise of commutating OFF-state voltage
V OX I F =8mA
Zero-cross voltage Transfer charac-teristics
Minimum trigger current I FT V D =12V, R L =30?V D =6V, R L =30?
Isolation resistance R ISO DC500V, RH =40 to 60%Turn-on time
t on AC 50Hz AC 50Hz
Turn-off time
t off Thermal resistance
(Between junction and case )
S112S01 series R th (j -c )S116S01 series
R th (j -a )
S116S01 Series :dI T /dt = -8A/ms
*6 S112S01 Series :dI T /dt = -6A/ms ON-state voltage
Critical rate of rise of OFF-state voltage MIN.TYP.MAX.Unit - 1.2 1.4V --10-4A --10-4A -- 1.5-- 1.5---50mA 30--V/μs 5--V/μs --35V --8mA --8mA 1010--?--1ms --10ms --10ms - 3.8-?C/W - 3.3-?C/W -
---
40
-
?C/W
T j =125?C, V D =400V, *6S112S02/S212S02
S116S02/S216S02
S112S01/S212S01
S116S01/S216S01
S112S02/S212S02
S116S02/S216S02S112S01/S212S01S112S02/S212S02S116S02
/S216S02
S116S01/S216S01Thermal resistance (Between junction and ambience )
V rms V rms dV/dt (dV/dt )C Resistance load
Resistance load
S112S01 Series/S116S01 Series
Ambient temperature T a (?C )
-25
255075100
125
24
681012(1)
(2)
(3)(4)
(5)
Ambient temperature T a (?C )
-25
255075100125
02
4681012141618
(1)
(2)
(3)(4)
(5)Fig. 1 RMS ON-state Current vs. Ambient
Fig. 2 RMS ON-state Current vs. Ambient
125
Ambient temperature T a (?C )
F o r w a r d c u r r e n t I F (m A )
25-25
00
755010050
1020304060Case temperature T (?C )
-25
255075100125
024681012
1416S116S01Series
S112S01Series Fig. 3 RMS ON-state Current vs. Case Temperature
Fig. 4 Forward Current vs. Ambient Temperature
Temperature
Temperature
R M S O n -s t a t e c u r r e n t I T R M S O N -s t a t e c u r r e n t I T (A r m s )
(S112S01Series )(S116S01Series )R M S O n -s t a t e c u r r e n t I T (A r m s )
(Note ) With the Al heat sink set up vertically,tighten the device at the center of the Al heat sink with a torque
shall not be carried out.
c (A r m s )
of 0.4N ?m and apply thermal conductive silicone grease on the heat sink mounting plate. Forcible cooling (1) With infinite heat sink
(2) With heat sink (280x 280x 2mm Al plate )(3) With heat sink (200x 200x 2mm Al plate )(4) With heat sink (100x 100x 2mm Al plate )(5) Without heat sink
(1) With infinite heat sink
(2) With heat sink (280x 280x 2mm Al plate )(3) With heat sink (200x 200x 2mm Al plate )(4) With heat sink (100x 100x 2mm Al plate )(5)
Without heat sink
1.0
2.0
2
10
020
40
6080100120140160180200
1
52050
100
S116S01Series S112S01Series
M a x i m u m O N -s t a t e p o w e r d i s s i p a t i o n (W )
2
468101214
16
02468101214161820M a x i m u m O N -s t a t e p o w e r d i s s i p a t i o n
(W )0
2
468101214
16
02468101214161820Fig. 5 Forward Current vs. Forward Voltage
-25
025*******
0246
8
10
S112S01/S212S01
S116S01/S216S01
S112S02/S212S02S116S02/S216S02
Fig. 9 Minimum Trigger Current vs.
Ambient Temperature
Fig. 8 Maximum ON-state Power
Dissipation vs. RMS ON-state Current
(S116S01Series )Fig. 7 Maximum ON-state Power Dissipation vs. RMS ON-state Current
(S112S01Series )Fig. 6 Surge Current vs. Power-on Cycle
Power-on cycle (Times )
((V D =12V S112S01, S212S01
S116S01,S216S01
V D
=6V S112S02,S212S02
S116S02,S216S02
))RMS ON-state current I T (Arms )
Ambient temperature T a (?C )
RMS ON-state current I T (Arms )
Forward voltage V F (V )
S112S01 Series/S116S01 Series
f=60H z
T j =25?C Start
T a =25?C
R L =30?
T a =25?C
F o r w a r d c u r r e n t I F (m A )
S u r g e c u r r e n t I s u r g e (A )
M i n i m u m t r i g g e r c u r r e n t I F T (m A )
-25
025*******
S112S02S116S02
S112S01S116S01
(S112S01/S112S02/S116S01/S116S02) Ambient Temperature
Fig.10 Repetitive Peak OFF-state Current vs.R e p e t i t i v e p e a k O F F -s t a t e c u r r e n t I D R M (A )
10-9
10-8
10-7
10-6
10-5
10
-4
Ambient temperature T a (?C )
V D =400V
S112S01 Sreies/S116S01 Series
-25
025*******
S212S02S216S02
S212S01S216S01
(S212S01/S212S02/S216S01/S216S02)Fig.11 Repetitive Peak OFF-state Current vs. Ambient Temperature
Ambient temperature T a (?C )
R e p e t i t i v e p e a k O F F -s t a t e c u r r e n t I D R M (A )
10
-9
10
-8
10
-7
10
-6
10-5
10
-4
V D =600V
q Please refer to the chapter “
Precautions for Use.”