Workbench用Geometry导入“.SLDPRT文件”进入
DesignModeler点击Generate提示失败的解决方案
错误如下:
(1)Unable to create plug-in perhaps needs registered
(2)Geometry Interface not found.
(3)Attach failed.
解决方案一:
在Workbench面板中,右键Geometry,然后对Properties进行设置,勾选Line Body。(默认是没有勾选的)
解决方案二:
1.Run the "CAD Configuration Manager 1
2.1".
(it has to be done under administrator rights)
2. Mark the "Workbench and ANSYS Geometry Interfaces"
3. Press "Next" button.
4. Press "Display Configuration Log File" button
5. Press "Configure Selected CAD Interfaces" button
6. Press "Exit" button