当前位置：文档库 › ASMC-PHB9-TX4C5中文资料

ASMC-PHB9-TX4C5中文资料

ASMC-PxB9-Txxxx

Envisium Power PLCC-4Surface Mount LED

Data Sheet

Features

?Industry standard PLCC-4 (Plastic Leaded Chip Carrier)

?High reliability LED package

?Mid-Power intensity brightness with optimum flux performance using TS AlInGaP dice technologies

?Available in Red, Red Orange and Amber colors

?High optical efficiency

?Higher ambient temperature at the same current possible compared to PLCC-2

?Super wide viewing angle at 120°?Available in 8 mm carrier tape on 7-inch reel

?Compatible with both IR and TTW soldering process Applications

?Interior automotive

– Instrument panel backlighting – Central console backlighting – Navigation and audio system – Push button backlighting ?Exterior automotive – Turn signals – Side repeaters – CHMSL

– Rear combination lamp – Puddle light

?Electronic signs and signals – Channel lettering – Contour lighting

– Indoor variable message sign

?Office automation, home appliances,industrial equipment – Front panel backlighting – Push button backlighting

– Display backlighting

Envisium

Envisium is the premier class of mid-Power LEDs from Agilent and Lumileds utilizing the very best solid-state lighting

technologies from these two

industry leaders. Envisium LEDs offer unparalleled performance,engineering and design flexibility.For the very first time, customers have options for mid-power LEDs.Description

The Envisium Power PLCC-4 SMT LED is an extension of Agilent’s PLCC-4 SMT LEDs. The package can be driven at high current due to its superior package design.The product is able to dissipate the heat more efficiently

compared to the conventional PLCC-2 SMT LEDs. These LEDs produce higher light output with better flux performance compared to the conventional PLCC-4 SMT LEDs.

The Envisium Power PLCC-4 SMT LEDs are designed for higher reliability, better performance,and operate under a wide range of environmental conditions. The performance characteristics of these new mid-power LEDs make them uniquely suitable for use in harsh conditions such as in automotive applications, and in electronics signs and signals.To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel.Every reel is shipped in single intensity and color bin (except for red), to provide close uniformity.These LEDs are compatible with the IR solder reflow process. Due to the high reliability feature of these products, they also can be mounted using through-the-wave soldering process.

The Envisium Power PLCC-4 SMT LED is available in 3 colors, red,red-orange and amber.

Device Selection Guide

Total Flux F V Test Intensity Min. I V Max. I V (mlm)[2,3]Current Dice

Color Part Number

Bin (mcd)(mcd)Typ.(mA)

Technology

630.001000.002600.00Red

ASMC-PRB9-TV005

V2790.001260.003300.0050

AlInGaP

W11000.001600.00-W1

1000.001600.004300.00Red Orange

ASMC-PHB9-TW005

W21200.002020.005000.0050

AlInGaP

X11580.002500.00-V1

630.001000.003000.00Amber

ASMC-PAB9-TV005

V2790.001260.003800.0050

AlInGaP

1000.00

1600.00

-Notes:

1.The luminous intensity, I V , is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis.

2.F V is the total luminous flux output as measured with an integrating sphere after the device has stabilized.

3.Flux tested at mono pulse conditions.

Package Dimensions

± 0.1

NOTE: ALL DIMENSIONS IN mm.

Absolute Maximum Ratings (T A = 25°C)Parameters ASMC-PxB9-Txxxx DC Forward Current [1]70 mA [3,4]Peak Forward Current [2]200 mA Power Dissipation 240 mW Reverse Voltage 5 V Junction Temperature 125°C

Operating Temperature -40°C to +100°C Storage Temperature

-40°C to +100°C

Notes:

1.Derate linearly as shown in figure 4.

2.Duty factor = 10%, Frequency = 1 kHz.

3.Drive current between 10 mA and 70 mA is recommended for best long-term performance.

4.Operation at currents below 5 mA is not recommended.

Optical Characteristics (T A = 25°C)

Luminous Intensity/Peak

Dominant Viewing

Luminous Total Flux Wavelength Wavelength Angle 2q 1/2[2]Efficacy h V [3]I V (mcd)/Dice

l PEAK (nm)l D [1] (nm)(Degrees)(lm/W)F V [4,5] (lm)Color Part Number Technology Typ.Typ.Typ.Typ.Typ.Red ASMC-PRB9-Txxx5AlInGaP 639.0630.01201550.30Red Orange ASMC-PHB9-Txxx5AlInGaP 623.0617.01202630.29Amber

ASMC-PAB9-Txxx5

AlInGaP

594.0

592.0

120

500

0.26

Notes:

1.The dominant wavelength, l D , is derived from the CIE Chromaticity Diagram and represents the color of the device.

2.q 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.

3.Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = I V /h V , where I V is the luminous intensity in candelas and h V is the luminous efficacy in lumens/watt.

4.F V is the total luminous flux output as measured with an integrating sphere after the device has stabilized.

5.Flux tested at mono pulse conditions.

Electrical Characteristics (T A = 25°C)

Forward Voltage V F (Volts) @ I F = 50 mA

Reverse Voltage V R @ 100 μA Part Number Typ.Max.Min.ASMC-PxB9-Txxx5

2.8

3.4

Part Numbering System

ASMC - PX 1B9-TX 2X 3X 4X 5

Packaging Option Color Bin Selection Intensity Bin Limit Intensity Bin Selection LED Chip Color

Figure 1. Relative intensity vs. wavelength.

Figure 2. Forward current vs. forward voltage.Figure 3. Relative intensity vs. forward current.

Figure 4. Maximum forward current vs. ambient temperature. Derated based on T J MAX = 125°C,R q JA = 300°C/W.

Figure 5. Radiation pattern.

WAVELENGTH – nm

R E L A T I V E I N T E N S I T Y

1.00.80380

480

580

680

730

780

630

530

430

0.60.40.20.10.30.50.70.9

FORWARD VOLTAGE – V F O R W A R D C U R R E N T – m A

020DC FORWARD CURRENT – mA

0.4 R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D A T 50 m A )

35454050556065700.80.21.0100.61.225515301.40

020

120

M A X I M U M F O R W A R D C U R R E N T – m A

AMBIENT TEMPERATURE – °C

50603040201070100

R E L A T I V E I N T E N S I T Y

1.00ANGLE – DEGREES

0.80.70.50.30.10.90.60.20.4-70

-50

-30

-90

-10

Figure 6a. Recommended Sn-Pb reflow soldering profile.

TIME

T E M P E R A T U R E

* THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX.

Figure 6b. Recommended Pb-free reflow soldering profile.

BOTTOM SIDE OF PC BOARD

TIME – SECONDS

T E M P E R A T U R E – °C

TOP SIDE OF PC BOARD

CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)PREHEAT SETTING = 150°C (100°C PCB)SOLDER WAVE TEMPERATURE = 245°C AIR KNIFE AIR TEMPERATURE = 390°C AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)AIR KNIFE ANGLE = 40°SOLDER: SN63; FLUX: RMA

NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY COOLED BEFORE EXERTING MECHANICAL FORCE.

Figure 7. Recommended wave soldering profile.

Figure 8. Recommended soldering pad pattern.

USER FEED DIRECTION

Figure 9. Tape leader and trailer dimensions.

Figure 10. Tape dimensions.

Figure 11. Reeling orientation.

Color Bin Limits Amber/Yellow Min. (nm)Max. (nm)1582.0584.52584.5587.03587.0589.54589.5592.05592.0594.56

594.5

597.0

Red Orange Min. (nm)Max. (nm)1611.0616.02

616.0

620.0

Red Min. (nm)Max. (nm)

Full Distribution

Tolerance of each bin limit = ± 1 nm.

Packaging Option (X 5)Option Test Current Package Type Reel Size 5

50 mA

Top Mount

7 inch

Color Bin Select (X 4)

Individual reel will contain parts from one full bin only.X 40Full Distribution A

1 and

2 only B 2 and

3 only C 3 and

4 only D 4 and

5 only E 5 and

6 only G 1, 2 and 3 only H 2, 3 and 4 only J 3, 4 and 5 only K 4, 5 and 6 only M 1, 2, 3 and 4 only N 2, 3, 4 and 5 only P 3, 4, 5 and 6 only R 1, 2, 3, 4, and 5 only S

2, 3, 4, 5 and 6 only

Intensity Bin Select (X 2X 3)

Individual reel will contain parts from one half bin only X 2

Min I V

Bin

X 30Full Distribution

3 3 half bins starting from X 61

4 4 half bins starting from X 61

5 5 half bins starting from X 617 3 half bins starting from X 628 4 half bins starting from X 629

5 half bins starting from X 62

Intensity Bin Limits & Typical Flux Bin ID Min. (mcd)Max. (mcd)V1715.00900.00V2900.001125.00W11125.001400.00W21400.001800.00X11800.002240.00X2

2240.00

2850.00

Tolerance of each bin limit = ±12%.

https://www.wendangku.net/doc/6612792087.html,/semiconductors For product information and a complete list of distributors, please go to our web site.

For technical assistance call:

Americas/Canada: +1 (800) 235-0312 or (916) 788-6763

Europe: +49 (0) 6441 92460

China: 10800 650 0017

Hong Kong: (+65) 6756 2394

India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/Interna-tional), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989

Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843

Data subject to change.

5989-2308EN