文档库 最新最全的文档下载
当前位置:文档库 › Cloudcom2014 mailing list

Cloudcom2014 mailing list

Cloudcom2014 mailing list
Cloudcom2014 mailing list

Mailing list:

cfp@https://www.wendangku.net/doc/6b16630905.html,.tw

ICSE news, wcom@https://www.wendangku.net/doc/6b16630905.html,

distributed-computing-announce@https://www.wendangku.net/doc/6b16630905.html,

hpdc-announce@https://www.wendangku.net/doc/6b16630905.html,

educfp@https://www.wendangku.net/doc/6b16630905.html,

papers@https://www.wendangku.net/doc/6b16630905.html,

ACM SIGCOMM sigcomm@https://www.wendangku.net/doc/6b16630905.html,

ACM SIGMETRICS performance@https://www.wendangku.net/doc/6b16630905.html,

ACM SIGMM sigmm@https://www.wendangku.net/doc/6b16630905.html,rmatik.uni-mannheim.de

E2E Interests end2end-interest@https://www.wendangku.net/doc/6b16630905.html,

ICST ASSYST assyst@https://www.wendangku.net/doc/6b16630905.html,

*****IEEE ComSoc E-News conferencesx@https://www.wendangku.net/doc/6b16630905.html,

IEEE ComSoc MMC Technical Committee multicomm@https://www.wendangku.net/doc/6b16630905.html,

IEEE ITC itc@https://www.wendangku.net/doc/6b16630905.html,

IEEE TCCN tccn@https://www.wendangku.net/doc/6b16630905.html,

IFIP EC-NEWS icec@listserver.tue.nl

MMVE mmve-public@https://www.wendangku.net/doc/6b16630905.html,

***My Colleagues mycolleagues@grid.lrg.ufsc.br

p2p-hackers p2p-hackers@https://www.wendangku.net/doc/6b16630905.html,

simu-conf vsim-conf@sce.carleton.ca

IACR Calendar of Events in Cryptology https://www.wendangku.net/doc/6b16630905.html,/events/submit.html IEEE Cipher https://www.wendangku.net/doc/6b16630905.html,/CFP/CFP-submission-guidelines.html

Ada community http://people.cs.kuleuven.be/~dirk.craeynest/ada-

belgium/events/list.html

cloudcomputing@https://www.wendangku.net/doc/6b16630905.html,

security-guidance-announce@https://www.wendangku.net/doc/6b16630905.html,

incident-management-forensics-announce@https://www.wendangku.net/doc/6b16630905.html,

top-threats-announce@https://www.wendangku.net/doc/6b16630905.html,

cloudaudit-announce@https://www.wendangku.net/doc/6b16630905.html,

cdg-announce@https://www.wendangku.net/doc/6b16630905.html,

ctp-announce@https://www.wendangku.net/doc/6b16630905.html,

big-data-announce@https://www.wendangku.net/doc/6b16630905.html,

Call-for-Paper Mailing Lists for Computer Science Conferences

https://www.wendangku.net/doc/6b16630905.html,.tw/~swc/cfp_list.html

ACM DBWorld (ACM SIGMOD)dbworld@https://www.wendangku.net/doc/6b16630905.html,

ACM MM-INTEREST (ACM SIGMM)mm-interest@https://www.wendangku.net/doc/6b16630905.html,

ACM SIGIR (ACM's Special Interest Group on

Information Retrieval)

IRList@https://www.wendangku.net/doc/6b16630905.html,

ACM SIGCOMM (ACM's Special Interest Group on

Data Communications)

sigcomm@https://www.wendangku.net/doc/6b16630905.html,

ACM SIGMETRICS Performance Bulletin Board performance@https://www.wendangku.net/doc/6b16630905.html,

ACM SIGMM (ACM's Special Interest Group on

Multimedia)

sigmm@https://www.wendangku.net/doc/6b16630905.html,rmatik.uni-mannheim.de ACM SIGOPS Submission Form

Chi-Announce chi-announcements@https://www.wendangku.net/doc/6b16630905.html,

Distributed Computing Announce distributed-computing-announce@https://www.wendangku.net/doc/6b16630905.html,

E2E Interests (End-to-End Research Group of IRTF)end2end-

interest@https://www.wendangku.net/doc/6b16630905.html, (check policies first)

IACR Calendar of Events in Cryptology Submission Form

IEEE Cipher Submission Guidelines IEEE ComSoc E-News conferencesx@https://www.wendangku.net/doc/6b16630905.html,

IEEE ComSoc MM Technical Committee multicomm@https://www.wendangku.net/doc/6b16630905.html, (send to Dr. Liang ZHOU first)

IEEE ITC (IEEE Internet Technical Committee)itc@https://www.wendangku.net/doc/6b16630905.html,

IEEE TCCC (IEEE Technical Committee on

Computer Communication)

tccc@https://www.wendangku.net/doc/6b16630905.html,

IEEE TCCN (IEEE Technical Committee on

Cognitive Networks)

tccn@https://www.wendangku.net/doc/6b16630905.html,

IEEE TCOS (IEEE Technical Committee on

tcos-announce@https://www.wendangku.net/doc/6b16630905.html,

Operating Systems and Application

Environments)

IEEE TCSC (IEEE Technical Committee on

discuss@https://www.wendangku.net/doc/6b16630905.html,

Scalable Computing)

IFIP EC-NEWS (IFIP Entertainment Computing)icec@listserver.tue.nl

MMKM (Multimedia Knowledge Management

mmkm@https://www.wendangku.net/doc/6b16630905.html,

Network)

MMVE (Massively Multiuser Virtual Environment)mmve-public@https://www.wendangku.net/doc/6b16630905.html,

My Colleagues mycolleagues@grid.lrg.ufsc.br

p2p-hackers p2p-hackers@https://www.wendangku.net/doc/6b16630905.html, Another list:

mycolleagues@grid.lrg.ufsc.br; amlist@takilab.k.dendai.ac.jp; conf@takilab.k.dendai.ac.jp; info-autonomic@https://www.wendangku.net/doc/6b16630905.html,; tccc@https://www.wendangku.net/doc/6b16630905.html,; NGN@https://www.wendangku.net/doc/6b16630905.html,;

sigmob@https://www.wendangku.net/doc/6b16630905.html,; SIGSIM@https://www.wendangku.net/doc/6b16630905.html,; podc@https://www.wendangku.net/doc/6b16630905.html,; tccc@https://www.wendangku.net/doc/6b16630905.html,; itc@https://www.wendangku.net/doc/6b16630905.html,; agents@https://www.wendangku.net/doc/6b16630905.html,; computational.science@https://www.wendangku.net/doc/6b16630905.html,; dbjapan@https://www.wendangku.net/doc/6b16630905.html,;

discuss@https://www.wendangku.net/doc/6b16630905.html,; TCI-ANNOUNCE@https://www.wendangku.net/doc/6b16630905.html,; tcgn@https://www.wendangku.net/doc/6b16630905.html,; manet@https://www.wendangku.net/doc/6b16630905.html,; multicomm@https://www.wendangku.net/doc/6b16630905.html,; MOBICOM@https://www.wendangku.net/doc/6b16630905.html,; mip6@https://www.wendangku.net/doc/6b16630905.html,; tccn@https://www.wendangku.net/doc/6b16630905.html,; tcgn@https://www.wendangku.net/doc/6b16630905.html,; info-autonomic@https://www.wendangku.net/doc/6b16630905.html,; TCPC.Mail@sce.carleton.ca; tcpp-announce@https://www.wendangku.net/doc/6b16630905.html,; P2P@https://www.wendangku.net/doc/6b16630905.html,; TC-comswtc@https://www.wendangku.net/doc/6b16630905.html,; tcgn@https://www.wendangku.net/doc/6b16630905.html,; cfp@mmlab.snu.ac.kr;

ontc@https://www.wendangku.net/doc/6b16630905.html,; ifip_nm@bbcr.uwaterloo.ca; advisor@networking.khu.ac.kr; orctrans@loria.fr; reres@laas.fr; dmanet@zpr.uni-koeln.de; ifip-tc6@informatik.rwth-aachen.de; ifip-tc6@lists.RWTH-Aachen.DE; doc_ele@iet.unipi.it; doc_inf@iet.unipi.it

mycolleagues@grid.lrg.ufsc.br

amlist@takilab.k.dendai.ac.jp

conf@takilab.k.dendai.ac.jp

info-autonomic@https://www.wendangku.net/doc/6b16630905.html,

tccc@https://www.wendangku.net/doc/6b16630905.html,

NGN@https://www.wendangku.net/doc/6b16630905.html,

info-autonomic@https://www.wendangku.net/doc/6b16630905.html, sigmob@https://www.wendangku.net/doc/6b16630905.html,

SIGSIM@https://www.wendangku.net/doc/6b16630905.html,

podc@https://www.wendangku.net/doc/6b16630905.html,,

tccc@https://www.wendangku.net/doc/6b16630905.html,

itc@https://www.wendangku.net/doc/6b16630905.html,

agents@https://www.wendangku.net/doc/6b16630905.html,

computational.science@https://www.wendangku.net/doc/6b16630905.html, dbjapan@https://www.wendangku.net/doc/6b16630905.html,

discuss@https://www.wendangku.net/doc/6b16630905.html,

TCI-ANNOUNCE@https://www.wendangku.net/doc/6b16630905.html,

tcgn@https://www.wendangku.net/doc/6b16630905.html,

manet@https://www.wendangku.net/doc/6b16630905.html, multicomm@https://www.wendangku.net/doc/6b16630905.html,

MOBICOM@https://www.wendangku.net/doc/6b16630905.html,

mip6@https://www.wendangku.net/doc/6b16630905.html,

tccn@https://www.wendangku.net/doc/6b16630905.html,

tcgn@https://www.wendangku.net/doc/6b16630905.html,

info-autonomic@https://www.wendangku.net/doc/6b16630905.html, TCPC.Mail@sce.carleton.ca

tcpp-announce@https://www.wendangku.net/doc/6b16630905.html,

P2P@https://www.wendangku.net/doc/6b16630905.html,

TC-comswtc@https://www.wendangku.net/doc/6b16630905.html,

tcgn@https://www.wendangku.net/doc/6b16630905.html,

cfp@mmlab.snu.ac.kr

ontc@https://www.wendangku.net/doc/6b16630905.html,

ifip_nm@bbcr.uwaterloo.ca

advisor@networking.khu.ac.kr

orctrans@loria.fr

reres@laas.fr

dmanet@zpr.uni-koeln.de

ifip-tc6@informatik.rwth-aachen.de

ifip-tc6@lists.RWTH-Aachen.DE

doc_ele@iet.unipi.it

doc_inf@iet.unipi.it

mycolleagues@grid.lrg.ufsc.br

info-autonomic@https://www.wendangku.net/doc/6b16630905.html,

tccc@https://www.wendangku.net/doc/6b16630905.html,

itc@https://www.wendangku.net/doc/6b16630905.html,

theorynt@https://www.wendangku.net/doc/6b16630905.html,

P2P@https://www.wendangku.net/doc/6b16630905.html,

tcgn@https://www.wendangku.net/doc/6b16630905.html,

TC-comswtc@https://www.wendangku.net/doc/6b16630905.html,

tcgn@https://www.wendangku.net/doc/6b16630905.html,

ontc@https://www.wendangku.net/doc/6b16630905.html,

dbworld@https://www.wendangku.net/doc/6b16630905.html,,

CABERNET-EVENTS@https://www.wendangku.net/doc/6b16630905.html,

itc@https://www.wendangku.net/doc/6b16630905.html,

performance@https://www.wendangku.net/doc/6b16630905.html,

agents@https://www.wendangku.net/doc/6b16630905.html,

webir@https://www.wendangku.net/doc/6b16630905.html,

computational.science@https://www.wendangku.net/doc/6b16630905.html, dbjapan@https://www.wendangku.net/doc/6b16630905.html,

peformance@https://www.wendangku.net/doc/6b16630905.html,,

DMANET@zpr.uni-koeln.de

cost237-transport@https://www.wendangku.net/doc/6b16630905.html,

cost257@informatik.uni-wuerzburg.de

Cost264@lip6.fr

doc_tlc@iet.unipi.it

dottorandi_iet@iet.unipi.it

conf@colmar.uha.fr,

fokus_usr@fokus.gmd.de,

opt-net@zib.de

admin@ai-gakkai.or.jp

advisor@networking.khu.ac.kr

co-advisor@networking.khu.ac.kr

cfp@mmlab.snu.ac.kr

ifip-tc6@informatik.rwth-aachen.de

ifip-tc6@lists.RWTH-Aachen.DE

ifip_tc6.3@di.uoa.gr

P2P@https://www.wendangku.net/doc/6b16630905.html,

ieee-cs@https://www.wendangku.net/doc/6b16630905.html,

alumni@https://www.wendangku.net/doc/6b16630905.html,

itc@https://www.wendangku.net/doc/6b16630905.html,

im-net@www.iwr.uni-heidelberg.de

opt-net@zib.de

dmanet@zpr.uni-koeln.de

i-d-announce@https://www.wendangku.net/doc/6b16630905.html,

irtf-announce@https://www.wendangku.net/doc/6b16630905.html,

end2end-china@https://www.wendangku.net/doc/6b16630905.html,

manet@https://www.wendangku.net/doc/6b16630905.html,

THEORYNT@https://www.wendangku.net/doc/6b16630905.html,

ontc@https://www.wendangku.net/doc/6b16630905.html,

SIGMOB@https://www.wendangku.net/doc/6b16630905.html,

agents@https://www.wendangku.net/doc/6b16630905.html,

podc@https://www.wendangku.net/doc/6b16630905.html,

tccc@https://www.wendangku.net/doc/6b16630905.html,

discuss@https://www.wendangku.net/doc/6b16630905.html,

isworld@https://www.wendangku.net/doc/6b16630905.html,

tcpp-announce@https://www.wendangku.net/doc/6b16630905.html,

computational.science@https://www.wendangku.net/doc/6b16630905.html,

amlist@takilab.k.dendai.ac.jp

dbworld@https://www.wendangku.net/doc/6b16630905.html,

sbc-l@https://www.wendangku.net/doc/6b16630905.html,.br

na.digest@https://www.wendangku.net/doc/6b16630905.html,

scicomp@uni-erlangen.de

University lists:

Here are some examples. These you will need to email and ask them to pass onto their

engineering/computer science departments:

industry-enquiries@https://www.wendangku.net/doc/6b16630905.html,; office@https://www.wendangku.net/doc/6b16630905.html,; cs.reception@https://www.wendangku.net/doc/6b16630905.html,;

d.myers@https://www.wendangku.net/doc/6b16630905.html,; enquiries@https://www.wendangku.net/doc/6b16630905.html,; teresa.czachowska@https://www.wendangku.net/doc/6b16630905.html,;

query@https://www.wendangku.net/doc/6b16630905.html,; shirley.atkinson@https://www.wendangku.net/doc/6b16630905.html,; comsc-ug@https://www.wendangku.net/doc/6b16630905.html,;

cmsinfo@https://www.wendangku.net/doc/6b16630905.html,; computerscience@https://www.wendangku.net/doc/6b16630905.html,; admin-cs@https://www.wendangku.net/doc/6b16630905.html,; enquiries@https://www.wendangku.net/doc/6b16630905.html,; dept@https://www.wendangku.net/doc/6b16630905.html,; g.coghill@https://www.wendangku.net/doc/6b16630905.html,; emps@https://www.wendangku.net/doc/6b16630905.html,; stephanie.green@https://www.wendangku.net/doc/6b16630905.html,;

j.clappison@https://www.wendangku.net/doc/6b16630905.html,;sse@https://www.wendangku.net/doc/6b16630905.html,; fpse-ugapply@https://www.wendangku.net/doc/6b16630905.html,; fpse-

mscapply@https://www.wendangku.net/doc/6b16630905.html,; enquiries@https://www.wendangku.net/doc/6b16630905.html,; s.a.trainis@https://www.wendangku.net/doc/6b16630905.html,;cmp-

admin@https://www.wendangku.net/doc/6b16630905.html,; comp-sci@https://www.wendangku.net/doc/6b16630905.html,; enquiries@https://www.wendangku.net/doc/6b16630905.html,; reception@https://www.wendangku.net/doc/6b16630905.html,; departmental-secretary@https://www.wendangku.net/doc/6b16630905.html,; info@https://www.wendangku.net/doc/6b16630905.html,; acso@https://www.wendangku.net/doc/6b16630905.html,; csadmin@https://www.wendangku.net/doc/6b16630905.html,; office@https://www.wendangku.net/doc/6b16630905.html,; depsec@https://www.wendangku.net/doc/6b16630905.html,; csadmin@https://www.wendangku.net/doc/6b16630905.html,; compsci@https://www.wendangku.net/doc/6b16630905.html,; generalenquiries@https://www.wendangku.net/doc/6b16630905.html,; compsci@https://www.wendangku.net/doc/6b16630905.html,; cs-office@https://www.wendangku.net/doc/6b16630905.html,;

pauline.greenhough@https://www.wendangku.net/doc/6b16630905.html,; csit-enquiries@https://www.wendangku.net/doc/6b16630905.html,;

Google +

LinkedIn

HPDC Group: https://www.wendangku.net/doc/6b16630905.html,/groups/CFP-IEEE-CloudCom-2014-

3338228.S.5818226982948716547?trk=groups%2Finclude%2Fitem_snippet-0-b-ttl

WikiCFP

https://www.wendangku.net/doc/6b16630905.html,/cfp/servlet/event.showcfp?eventid=34632©ownerid=58936

IEEE

https://www.wendangku.net/doc/6b16630905.html,/publications/call-for-papers

CFP: The 6th IEEE International Conference on Cloud Computing Technology and Science (CloudCom 2014)

Please accept our apologies if you received multiple copies of this CFP.

================================================================================ ====================

Call for Papers and Doctoral Consortium

The 6th IEEE International Conference on Cloud Computing Technology and Science (CloudCom 2014), Singapore, December 15-18, 2014

https://www.wendangku.net/doc/6b16630905.html,/

======================================================================== ====================

CloudCom is the premier conference on Cloud Computing worldwide, attracting researchers, developers, users, students and practitioners from the fields of big data, systems architecture, services research, virtualization, security and privacy, high performance computing, always with an emphasis on how to build cloud computing platforms with real impact. The conference is co-sponsored by the Institute of Electrical and Electronics Engineers (IEEE), is steered by the Cloud Computing Association, and draws on the excellence of its world-class Program Committee and its participants.

Manuscripts need to be prepared according to the IEEE CS format, for regular papers, the page limit will be 8 pages. Distinguished papers will be invited to be included within a number of special issues in prestigious international journals.

**************************** IMPORTANT DATES *************************************

Paper submissions: July 31, 2014

Paper Notification: September 2, 2014

Paper Camera-ready: September 16, 2014

*************************** SCOPE AND TOPICS *************************************

Topics of interest include, but are not limited to:

Architecture

? Cloud Services models

? Cloud services reference models and standardization

? Intercloud architecture models

? Cloud federation and hybrid cloud infrastructure

? Cloud services provisioning and management

?Cloud services delivery models, campus integration and “last mile” issues

? Networking technologies for data centers, intracloud and interclouds

? Cloud powered services design

? Programming models and systems/tools

? Cloud system design with FPGA, GPU, APU

? Monitoring, management and maintenance

? Operational, economic and business models

? Green data centers

? Business processes, compliance and certification

? Dynamic resource provisioning

Big Data

? Machine learning

? Data mining

? Approximate and scalable statistical methods

? Graph algorithms

? Querying and search

? Data Lifecycle Management for Big Data

? Frameworks, tools and their

? Composition

? Storage and analytic architectures

? Performance and debugging

? Hardware optimizations for Big Data

? Data Flow management and scheduling

Security and Privacy

? Authentication and authorization

? Cloud integrity and binding issues

? Cryptography for/ in the cloud

? Hypervisor security

? Identity/ Security as a Service

? Prevention of data loss or leakage

? Secure, interoperable identity in the Cloud

? Security and privacy in clouds

? Trust and credential management

? Trusted Computing in Cloud Computing

? Usability and security

Services and Applications

? Security services on the Cloud

? Data management applications and services

? Scheduling and application workflows on the Cloud ? Cloud application benchmarks

? Cloud-based services and protocols

? Cloud model and framework

? Cloud-based storage and file systems

? Cloud scalability and performance

? Fault-tolerance of cloud services and applications ? Application development and debugging tools

? Business models and economics of Cloud services ? Services for improving Cloud application availability ? Use cases of Cloud applications

Virtualization

? Server, storage, network virtualization

? Resource monitoring

? Virtual desktop

? Resilience, fault tolerance

? Modeling and performance evaluation

? Security aspects

? Enabling disaster recovery, job migration

? Energy efficient issues

HPC on Cloud

? Load balancing for HPC clouds

? Middleware framework for HPC clouds

? Scalable scheduling for HPC clouds

? HPC as a Service

? Performance Modeling and Management

? Programming models for HPC clouds

? HPC cloud applications ; Use cases, experiences with HPC clouds

? Cloud deployment systems for HPC clouds

? GPU on the Cloud

IoT and Mobile on Cloud

? IoT cloud architectures, models

? Cloud-based dynamic composition of IoT

? Cloud-based context-aware IoT

? Mobile cloud architectures and models

? Green mobile cloud computing

? Resource management in mobile cloud environments

? Cloud support for mobility-aware networking protocols

? Multimedia applications in mobile cloud environments

? Security, privacy and trust in mobile IoT clouds

? Cloud-based mobile networks and applications

General Track

Other emerging and new topics in the cloud, such as,

? Software defined systems

? Economics and market mechanisms

? Green Cloud Computing

? Benchmarking and performance studies

*************************** Organizing Committee ************************************* General Chairs

Wentong Cai, Nanyang Technological University

Rick Siow Mong Goh, IHPC A*Star, Singapore

Program Chairs

Siani Pearson, HP Labs, UK

Bingsheng He, Nanyang Technological University

Xueyan Tang, Nanyang Technological University

Poster and Demo

Lu Zhang, Southwest Jiaotong University, China

Zengxiang Li, IHPC A*Star, Singapore

PhD Consortium

Shadi Ibrahim, INRIA, France

Jianfeng Zhan, ICT, CAS, China

Workshops & Tutorials Chairs

Rui Fan, Nanyang Technological University

Xiaorong Li, IHPC A*Star, Singapore

Industry and Exhibition Chairs

Zheng Qin, IHPC A*Star, Singapore

Lee Bu Sung, Francis, Nanyang Technological University

Publication Chair

Haikun Liu, Nanyang Technological University

Steering Committee

Chunming Rong, Univ. of Stavanger, Norway

Martin Gilje Jaatun, SINTEF, Norway

Albert Zomaya, Univ. of Sydney, Australia

Stephen L. Diamond, IEEE Cloud Computing Initiative, USA

================================================================== ======================

Call for Workshop Proposals and Doctoral Consortium

The 6th IEEE International Conference on Cloud Computing Technology and Science (CloudCom 2014), Singapore, December 15-18, 2014

https://www.wendangku.net/doc/6b16630905.html,/

======================================================================== =============

CloudCom 2014 Call for Workshop Proposals

http://cipsijoomla.ux.uis.no/cloudcom2014/index.php/call-for-papers/call-for-workshops

CloudCom 2014 is soliciting proposals for full-day / half-day workshops to be held in conjunction with CloudCom 2014 in Singapore from December 15-18, 2014. We invite you to submit proposals on any topic related to the broad set of research and application areas covered by CloudCom. Workshops can be used to publish early results and to conduct teaching and provide hands-on experience for topics of

A workshop proposal should include the following information:

●Workshop title and organizer's contact information.

●Motivation, rationale and coverage of the workshop.

For regular workshops, a draft Call for Papers, as complete as possible.

For teaching workshops, a draft of the syllabus.

●The workshop deadlines, both internal and external.

●Workshop format, i.e., expected number of participants, submitted and presented

papers, invited talks, panels, demonstrations, etc.

●Prior history of this workshop, if any, including number of submissions, acceptances,

and attendees.

Please email workshop proposals in PDF format to Rui Fan ( fanrui@https://www.wendangku.net/doc/6b16630905.html,.sg) and Xiaorong Li (xiaorong.li.2010@https://www.wendangku.net/doc/6b16630905.html,).

Important Dates

Deadline for workshop proposals May 1, 2014

Notification for workshop organizers May 15, 2014

Call for Doctoral Consortium

The Doctoral Consortium at the IEEE International Conference on Cloud Computing Technology and Science (CloudCom) provides a forum for students in all area of Cloud research to discuss their topics with other Ph.D students and with established researchers in the area, and to receive feedback and advice on their Ph.D research works. The consortium also offers graduate students an opportunity to make useful contacts regarding future career opportunities related to their research.

Selected students will be invited to present an oral presentation on their ongoing research.

SUBMISSION:

Authors are invited to submit papers not exceeding 6 pages in 2-column IEEE format including all figures and references. The papers should be structured as technical papers and should include the author & advisor(s) names and affiliations. Each submission must be accompanied by an official signed letter of the official PhD

advisor(s), endorsing the submission of the Ph.D student and verifying that the applicant is a full-time student. Submitted papers will be judged on correctness, originality, technical strength, significance, and quality of presentation. Papers should be prepared as the .pdf files and submitted electronically via EasyChair.

PUBLICATION

The proceedings of the doctoral consortium will be published as part of CloudCom2014 Proceedings through the IEEE Computer Society Conference Publishing Services, and will be distributed electronically at the conference.

IMPORTANT DATES

Deadline for submission: August 15, 2014

Notification of Acceptance: September 6, 2014

Full papers due: September 16, 2014

PhD Consortium Chairs

Shadi Ibrahim, INRIA, France

Jianfeng Zhan, ICT, CAS, China

Technical Program Committee

Alexandra Carpen-Amarie, Vienna University of Technology, Austria

Hanhua Chen, Huazhong University of Science and Technology, China

Alexandru Costan, INRIA, France

Sheng Di, INRIA and Argonne National Laboratory, USA

Mohammad Hammoud, Carnegie Mellon University, Qatar

Rui Han, ICT, Chinese Academy of Sciences, China

Xiaolin (Andy) Li, University of Florida, USA

Xiaoyi Lu, The Ohio State University, USA

Ana-Maria Oprescu, Universiteit van Amsterdam, The Netherlands

Anne-Cécile Orgerie, CNRS, IRISA, France

Sherif Sakr, University of New South Wales and NICTA, Australia

Huliang Weng, Huawei, China

clhung@https://www.wendangku.net/doc/6b16630905.html,.tw;cytang@https://www.wendangku.net/doc/6b16630905.html,.tw;cyulin@https://www.wendangku.net/doc/6b16630905.html,.tw;Mohammed.Odeh@uwe.

https://www.wendangku.net/doc/6b16630905.html,;yahya.al-hazmi@tu-

berlin.de;philipp.reinecke@https://www.wendangku.net/doc/6b16630905.html,;Dimitra.Simeonidou@https://www.wendangku.net/doc/6b16630905.html,;ken@cs.cornell.ed u;jimmylin@https://www.wendangku.net/doc/6b16630905.html,;rbuyya@https://www.wendangku.net/doc/6b16630905.html,.au;mo.adda@https://www.wendangku.net/doc/6b16630905.html,;donaldk@inf.ethz.c h;mfreed@https://www.wendangku.net/doc/6b16630905.html,;csckshiu@https://www.wendangku.net/doc/6b16630905.html,.hk;press@egi.eu;contact@egi.eu;z haijidong@https://www.wendangku.net/doc/6b16630905.html,;gcf@https://www.wendangku.net/doc/6b16630905.html,;m.gao@https://www.wendangku.net/doc/6b16630905.html,;alan.dearle@https://www.wendangku.net/doc/6b16630905.html,;simon.dobson@https://www.wendangku.net/doc/6b16630905.html,;saleem@st-

https://www.wendangku.net/doc/6b16630905.html,;graham.kirby@st-

https://www.wendangku.net/doc/6b16630905.html,;erdal.cayirci@uis.no;akuo@uvic.ca;yangg@https://www.wendangku.net/doc/6b16630905.html,;jcao@mail.tsingh https://www.wendangku.net/doc/6b16630905.html,; uxl@https://www.wendangku.net/doc/6b16630905.html,; bartosz.belter@man.poznan.pl; y.demchenko@uva.nl;

hjiang@https://www.wendangku.net/doc/6b16630905.html,; cherung@https://www.wendangku.net/doc/6b16630905.html,; allen@https://www.wendangku.net/doc/6b16630905.html,.tw;

g.difatta@https://www.wendangku.net/doc/6b16630905.html,; aikaterini.stamou@unige.ch; cchu@https://www.wendangku.net/doc/6b16630905.html,.tw;

wtsai36@https://www.wendangku.net/doc/6b16630905.html,; fjwang@https://www.wendangku.net/doc/6b16630905.html,.tw; ghhwang@https://www.wendangku.net/doc/6b16630905.html,.tw;

chunming.rong@uis.no; tomasz.w.wlodarczyk@uis.no; clam@unipi.gr;

prizomil@aegean.gr;

PS教程实例1000例

https://www.wendangku.net/doc/6b16630905.html,/thread-446934-1-1.html Photoshop绘制逼真头发发丝效果 https://www.wendangku.net/doc/6b16630905.html,/thread-446912-1-1.html Photoshop合成在空中漂移的陆地 https://www.wendangku.net/doc/6b16630905.html,/thread-446909-1-1.html Photoshop制作漂亮的紫色水晶字效果 https://www.wendangku.net/doc/6b16630905.html,/thread-446908-1-1.html Photoshop打造梦想效果的背景字教程 https://www.wendangku.net/doc/6b16630905.html,/thread-446900-1-1.html Photoshop简单制作灯光下的黄金字 https://www.wendangku.net/doc/6b16630905.html,/thread-446907-1-1.html Photoshop制作菊花照片马赛克效果 https://www.wendangku.net/doc/6b16630905.html,/thread-446889-1-1.html Photoshop转手绘教程:给玄彬照片转手绘https://www.wendangku.net/doc/6b16630905.html,/thread-446745-1-1.html Photoshop调出男性外景颓废黄调 https://www.wendangku.net/doc/6b16630905.html,/thread-446740-1-1.html Photoshop调色美女模特青褐色效果 https://www.wendangku.net/doc/6b16630905.html,/thread-446737-1-1.html Photoshop使用通道给儿童照去除雀斑 https://www.wendangku.net/doc/6b16630905.html,/thread-446559-1-1.html Photoshop制作唯美效果的风景照 https://www.wendangku.net/doc/6b16630905.html,/thread-446557-1-1.html Photoshop制作印有犀利哥标志的T恤 https://www.wendangku.net/doc/6b16630905.html,/thread-446538-1-1.html Photoshop为照片打造柔美朦胧效果 https://www.wendangku.net/doc/6b16630905.html,/thread-446212-1-1.html Photoshop打造漂亮的镶钻字教程 https://www.wendangku.net/doc/6b16630905.html,/thread-446201-1-1.html Photoshop音画教程:绘制逼真的缝绳效果https://www.wendangku.net/doc/6b16630905.html,/thread-446198-1-1.html Photoshop音画教程:自定义形状缝线制作方法https://www.wendangku.net/doc/6b16630905.html,/thread-446192-1-1.html Photoshop签名教程:灰色魔女动漫成签https://www.wendangku.net/doc/6b16630905.html,/thread-446190-1-1.html Photoshop音画教程:立体边框效果制作https://www.wendangku.net/doc/6b16630905.html,/thread-446187-1-1.html Photoshop加手绘板绘制中国风的美女 https://www.wendangku.net/doc/6b16630905.html,/thread-446159-1-1.html Photoshop把美女照片转成海报效果 https://www.wendangku.net/doc/6b16630905.html,/thread-446172-1-1.html Photoshop制作甜心蛋糕公主签名教程 https://www.wendangku.net/doc/6b16630905.html,/thread-446147-1-1.html Photoshop给视频截图调出亮白艳丽效果https://www.wendangku.net/doc/6b16630905.html,/thread-446140-1-1.html Photoshop简单三步做出照片泛白LOMO风格https://www.wendangku.net/doc/6b16630905.html,/thread-446077-1-1.html Photoshop边框教程:简单制作撒点边框https://www.wendangku.net/doc/6b16630905.html,/thread-446042-1-1.html Photoshop制作破碎的玻璃字教程 https://www.wendangku.net/doc/6b16630905.html,/thread-445950-1-1.html Photoshop制作尘封的记忆古签名 https://www.wendangku.net/doc/6b16630905.html,/thread-445882-1-1.html Photoshop简单的制作蕾丝边框 https://www.wendangku.net/doc/6b16630905.html,/thread-445690-1-1.html Photoshop调出美女水嫩的肌肤效果 https://www.wendangku.net/doc/6b16630905.html,/thread-445678-1-1.html Photoshop为汽车添加闪亮的车灯效果 https://www.wendangku.net/doc/6b16630905.html,/thread-445672-1-1.html Photoshop调出清爽色调的海滩照片 https://www.wendangku.net/doc/6b16630905.html,/thread-445656-1-1.html Photoshop制作炫彩的花纹文字特效 https://www.wendangku.net/doc/6b16630905.html,/thread-445565-1-1.html Photoshop调出照片的复古怀旧色 https://www.wendangku.net/doc/6b16630905.html,/thread-445561-1-1.html Photoshop轻松打造MM水清纯靓丽肌肤https://www.wendangku.net/doc/6b16630905.html,/thread-445511-1-1.html Photoshop调出人物的淡雅粉嫩肤色教程https://www.wendangku.net/doc/6b16630905.html,/thread-445488-1-1.html Photoshop+IR制作花瓣飘落GIF动态效果https://www.wendangku.net/doc/6b16630905.html,/thread-445480-1-1.html Photoshop制作墙上的霓虹灯文字效果 https://www.wendangku.net/doc/6b16630905.html,/thread-445475-1-1.html Photoshop制作美女照片漂亮的素描风格https://www.wendangku.net/doc/6b16630905.html,/thread-445465-1-1.html Photoshop制作真实的建筑物雪景效果 https://www.wendangku.net/doc/6b16630905.html,/thread-445441-1-1.html Photoshop打造美女迷人的眼妆 https://www.wendangku.net/doc/6b16630905.html,/thread-445428-1-1.html Photoshop快速给人物加上闪亮的蜜唇 https://www.wendangku.net/doc/6b16630905.html,/thread-445422-1-1.html Photoshop巧用匹配颜色校正偏黄色照片https://www.wendangku.net/doc/6b16630905.html,/thread-444870-1-1.html Photoshop制作汤姆克鲁斯的阿凡达特效https://www.wendangku.net/doc/6b16630905.html,/thread-444407-1-1.html Photoshop曲线工具基础教程:色彩对比 https://www.wendangku.net/doc/6b16630905.html,/thread-444406-1-1.html Photoshop色阶实例教程:调整照片色彩明暗度https://www.wendangku.net/doc/6b16630905.html,/thread-444071-1-1.html Photoshop调色教程:人物淡彩及美白教程https://www.wendangku.net/doc/6b16630905.html,/thread-444069-1-1.html Photoshop绘制真实的香水瓶效果 https://www.wendangku.net/doc/6b16630905.html,/thread-444007-1-1.html Photoshop打造简单的彗星划过效果 https://www.wendangku.net/doc/6b16630905.html,/thread-444003-1-1.html Photoshop保持肤色细节给人物美白 https://www.wendangku.net/doc/6b16630905.html,/thread-444002-1-1.html Photoshop设计一个简洁灰色系的网页模板https://www.wendangku.net/doc/6b16630905.html,/thread-444001-1-1.html Photoshop简单调出人物质感铜色效果 https://www.wendangku.net/doc/6b16630905.html,/thread-443999-1-1.html Photoshop随心随遇制作人物阿凡达效果https://www.wendangku.net/doc/6b16630905.html,/thread-443997-1-1.html Photoshop制作滚动显示的文字GIF动态效果https://www.wendangku.net/doc/6b16630905.html,/thread-443955-1-1.html Photoshop调出黄转粉色调 https://www.wendangku.net/doc/6b16630905.html,/thread-443791-1-1.html Photoshop照片转手绘之头发的画法教程https://www.wendangku.net/doc/6b16630905.html,/thread-443789-1-1.html巧用Photoshop随心所欲给汽车皮肤换颜色

个人简历特长怎么写_个人简历爱好特长范文

个人简历特长怎么写_个人简历爱好特长范文简历是就业的敲门砖,也是体现个人能力、特长、兴趣、品行的精华浓缩版。下面小编分享了个人简历爱好特长范文,供你参考。 个人简历特长爱好写作技巧1、个人特长一定要写充实,有内容,有个性 至少能在一定程度上反应个人的真实情况,不能需写、乱写。内容要真实可靠。 2、写强项 弱项不要写,面试人员说不定对哪个项目感兴趣,有时会跟你聊两句,尤其是接连几个、十几个面试之后,有些招聘人员爱聊一些轻松的话题,一旦聊到的是你的弱项,绝大部分人会很尴尬,显出窘态,丧失自信,这对你很不利。更重要的是,招聘人员会觉得你在撒谎。 3、强项要写也只写两到三项 因为极少有人能够达到“十项全能”水平。如果你觉得自己有很多强项,那么招聘经理会认为你的标准可能稍低了点儿。当然,确实有人有七八项强项,但一般人不相信个人强项特别多,所以你也没必要写那么多,以免给人轻浮的感觉。 4、个人特长有有一两行即可,不可太长 简历的格式应便于阅读,有吸引力。并使人对自己和自己的目标有良好的印象。在简历中要充分展示你的专业特长和一般特长,强调过去所取得的成绩。最好能写出三种以上的成绩和优点,并且要讲究

材料的排列顺序。 5、不具体的爱好不写 这些都是非常宽泛的词语,比如你是钢琴九级,而你在简历中只说自己爱好音乐,很可能会被误解为你就是爱唱唱卡拉OK。不具体 的爱好,通常会被大家理解为你根本就没有真正的爱好,更糟糕的是,人们会认为你的写作水平很差。 而阅读这样的爱好最好不写,哪个学生不是寒窗苦读才熬到今天,除非你对于某段历史、某种文学真的很有研究,否则建议不写为妙,要知道中资企业的人事经理大多都是文科出身,业务上不能把你考倒,文学方面鹿死谁手就不得而知了。 6、最好能写上一两项体育爱好 否则招聘经理会认为你的体质很差不适合运动,或者你缺乏毅力不愿运动,因为有些工作需要经常出差或者加班,如此高强度的工作可能你心有余而力不足,那么可能就不会聘用你。不妨写上羽毛球等日常生活中经常玩的运动项目,既没有高抬自己大多数时间都在捡球的水平,又没有让招聘经理失望。 一般来说,爱好和特长都是如实写,比如性格优势、能力优势等。还有一点我觉得比较重要,那就是,你的爱好和特长与你应聘职位有什么关系。比如音频网络计算机类的,就可以写你的电脑技术好,音频传媒文秘的,就写喜欢阅读写作,文字掌控力强之类的。如果你已经写了这方面的,尽量上网或者看书找些相关类的知识恶补一下,至少知道基本的行业形势定位概念啊之类的吧。总之,尽量还是写,但

VFP中的列表框控件(listbox)

VFP中的列表框控件(listbox) 一.列表框(listbox):主要用于选择一组指定的数据,用户从列表中选取选项,然后执行所需的操作. 二.列表框常用属性:见下表 注1(rowsourcetype属性可指定的值): 0-无,运行时使用列表框的确良additem和addlistitem方法加入 1-值,将列表框的内容在设计时直接写在该属性中 2-表别名:由columncount确定表中选择的字段.当用户选择列表框时,记录指针将自动移到该记录上 3-sql语句:见sql部分,由执行的结果产生. 4-查询文件名:见查询部分,由查询结果产生 5-数组名 6-字段名表:可用表别名作为字段前缀.当用户选择列表项时,记录指针将自动移到该记录上7-文件名描述框架,可包含"*"和"?"来描述在列表框中显示的文件名 8-结构

9-弹出式菜单,提供向后兼容. 二.列表框常用的方法:见下表 三.列表框常用事件:列表框的常用事件为click(单击)事件和dbclick(双击)事件. 四.例:列表框练习 1.新建表单,添加一个文本框text1,三个命令按钮command1~command3,三个命令按钮的caption属性依次设为"加入","移出"和"全部移出",一个列表框list1.界面如图25 2.设置属性:将表单的caption属性设为"列表框练习",autocenter属性设为.T.;将列表框list1的moverbars属性设为.T.,multiselect属性设为.T. 3.编写代码: ●"加入"命令按钮command1的click事件: qm=thisform.text1.value IF !empty(qm) no=.t. FOR i=1 to thisform.list1.listcount IF thisform.list1.list(i)=qm &&如果文本框中输入的内容和列表框中已存在的内容相同,则不添加 no=.f. ENDIF NEXT i IF no thisform.list1.additem(qm) thisform.refresh

塑胶件装配教程概要

塑料件压配 塑料制件组装中最简单的是利用它们的弹性形成压配组装。组装圆柱形塑料制件最常使用压配组装。用过大的斜度角模制的孔径在组装前可能需要扩大。 有纹理或滚花轴的扭曲强度包含某种程度的机械互锁。对刚性的、无定形聚合物推荐用光滑轴,而较粗糙的表面可与对应力集中效应不太敏感的更柔软的、半结晶聚合物配合使用。机械设计的改进如键槽或其他轴结构,也可提高轮毂\轴组装的扭曲强度。 搭配组装 搭配组装最突出的缺点是接头破坏,搭配接破很难或不可能修复。因此,对一定的产品,需要对所需的接头进行保险设计。过剩度可能对设备和最终产品成本有一定影响,但制件的使用寿命延长了。另一个缺点是制件的配合公差较难控制。过盈或过度应力可能忖破坏;而欠盈可导致固定不紧或制件松动。

机械紧固件 机械紧固件包括机制螺钉、自攻丝螺钉、金属嵌件、推进紧固件、变速夹、螺母、螺钉、双头螺栓、卡钉、活页和各种专用金属附件产品。机械紧固件大多是金属的,在多数塑料产品的使用范围内其尺寸和性能几乎不随温度、时间和相对湿度而变化。用不锈钢或塑料做的紧固件可在很高温度或腐蚀性条件下使用。连接较大的塑料制件时,机械紧固件有是与黏合剂一起使用。机械紧固件起夹具作用,当黏合剂交联时,制件安装就位,并且在产品使用过程中也增加了一种安全措施。机械紧固件是点接触的,因此形成潜在的、局部高应力区域,这种紧固件在使用时需要孔洞,使应力集中和熔合线问题增加。使用机械紧固件达到流体密封或气密封也是困难的,除非使用像塑性密封件或弹性垫圈这些附加制件。 组装塑料产品用的最多的一灯机械紧固件是螺钉。这些丝扣紧固件可任意控制组装预载荷。根据螺钉用途而分的机械组装方法包括:机制螺钉、带有螺纹嵌件或模塑螺纹的机制螺钉以及自攻丝螺钉。 针对拆卸的设计产品必须具备两个共同点:拆卸简单且便宜,所选原材料必须容易回收且经济。组装件所用螺钉数且应保持最少,所用螺钉尺寸\类型应尽可能标准化。用气动工具可快速移动螺钉,或当啮合螺纹是塑料时,有时可用强力将螺钉从啮合制件的空洞或凸台中拉出。 机制螺钉和螺母 组装塑料产品中常用机制螺钉、螺母和垫圈。使用局限于产品表面要求不苛刻的操作中。机制螺钉组装和自动化非常困难。如果被连接的两个制件是由膨胀

PS超唯美系教程

NO.1 用图片素材打造梦幻效果 1、打开原图,执行图层-新建调整图层-可选颜色,数值设置如下: 红色:-100 32 100 -46 黄色:-100 -34 100 100 黑色:20 23 100 -23 2、进入通道面板(找不到通道面板?执行窗口-通道),复制绿通道,得到“绿副本”通道,选择“绿副本”通道,执行图像-计算,源1和源2的通道都是“绿副本”,图层不一样对吧?不用管,得到我们想要的选区就可以了,混合模式为线性光,不透明度100%。点确定后出现alpha1通道,这部计算的目的是为了得到更精确的天空选区。点击RGB通道,回到图层面板。 3、把我原图相册里的叠加素材打开,拉到这个图里面。(不会拉?就是用移动工具,快捷键为V,按住左键拉到这张图上就行了),拉过来后调整位置和大小(调整大小的快捷键是ctlr+T,调整好大小后ctrl+回车确定。),摆在哪自己喜欢就好。图层模式改为叠加。 4、第四步写错了,是叠加图层,就上一步拉进来那个。回到通道面板,按住ctrl左击alpha1通道载入选区,出现蚂蚁线了吧?然后回到图层面板,对新拉进的那个滤色图层添加蒙版,添加蒙版就在你背景层下面那一行工具里面,左数第三个,就是一个方块中间是圆圈那个小工具。这样滤色素材的颜色就盖到了云彩上。 5、接着把我原图相册里的滤色素材拉到这张图里面,调整位置和大小。图层模式改为滤色。

6、做一个圆角相册边的效果,选择矩形工具,快捷键为U,在最上面的一条工具里选择圆形圆形矩角工具,在图中拉出你想要保留的地方,ctrl+回车建立选区,ctrl+shift+I反选,编辑-填充-白色。这一步完全个人爱好,不喜欢可以不做,完工。 NO.2 浓郁黄绿色

关于WPF的listbox控件绑定问题

关于WPF的listbox控件 首先关于listbox以及datagrid 人们比较喜欢用datagrid来绑定数据,应为它的文本生成出来比listbox要整齐,相对来说listbox生成的文本可以用四个字来形容----不堪入目!下面我用2个控件做出的效果: 发现没?Listbox也能使之对齐。。详解如下: 前台绑定:XAML 其中Name;Gends;Age;Hobby 分别为实例类的属性(也是表的属性); 再看后台很简洁;

嵌件组装设计教程

嵌件组装设计教程 (以下由无维网-不怕整理,转载请注明。欢迎光临无维网:https://www.wendangku.net/doc/6b16630905.html,) 通常金属嵌件与塑胶制件一起使用,形成高质量,耐久的机械组装。这种结构适用于有耐用要求的产品。(如多次组装/拆卸操作)。也适用于减小摩擦的改良设计。如图实例所示: 实例一:金属螺母的嵌件设计实例二:金属轴的嵌件设计接下来,我们一起来详细讨论下这种结构工艺的注意事项及其优劣点: 一,埋塑嵌件 这种工艺是我们最常见,也最常用的。到底什么是埋塑嵌件呢。 埋塑就是指将嵌件预先放入模具中,利用塑胶熔体将其浸埋,当塑胶熔体冷却后,将嵌件固化,锁定在适当的位置。 常见的嵌件种类: 我们常见的有如:螺纹紧固件,加强筋,轴承,提供导电性连接点,或是其它的特殊作用,如像很多面板上的防刮伤用的铝合金等等……最常见的就是螺母或双头螺栓类的嵌件。埋塑嵌件会明显的增加产品的成本,只有当功能需要或成本合算时才使用。(到时老板发火别找我^^) 埋塑嵌件的常用材质: 像车工嵌件我们常用铝镀黄铜,不锈钢镀黄铜或是直接用黄铜来车加工制造,因为黄铜的耐腐蚀性和易加工性是非常好的。总之一句话,制造嵌件最好选用有一点韧性的材质,从材料工程的专业角度来讲,因为嵌件必须提供熔体流动截流作用时提供一点韧性(这个不懂没有关系,用多了你就会知道了)。当嵌件的形状很复杂时,无法用车加工时,通常用粉末冶金来制作嵌件零件。但是埋塑嵌件存下这几个值得注意的事项,如下: 1:循环时间使用埋塑嵌件会增加零件成型的周期,且模具的保养费也会明显增高。 2:报废制件各种原因,如注塑不良,或是嵌件遗漏,位置不良等等,会造成整个零件报废3:模具损伤如果嵌件尺寸不对,或是嵌件设计不良,会造成模仁的损伤。(如图示)

PS经典图例教程

Photoshop经典实例教程3000例 1、教你打造偏色艺术色调教程 2、·教你打造偏色艺术色调教程 3、Photoshop┾製造制造另类婚纱照片 4、⒈款粉帥氣de游戲做圖 5、PS(IR)可爱的棒棒糖 6、ps打造唯美色调 7、PS打造超炫人物效果 8、一款比较自然的眨眼教程 9、Photoshop最简易的磨皮法 10、Photoshop]制作下雨的效果 11、小菱形背景和圆点背景的做法 12、[Photoshop]PS打造淡彩风格的幻眼效果 13、Photoshop]用Photoshop滤镜打造梦幻艺术效果 14、Photoshop]巧用PS打造镶满诱人钻石的文字 15、Photoshop]PS制作幽冥火焰 16、Photoshop]简单的叠影制作方法 17、Photoshop]制作冬季恋歌浪漫雪景效果 18、Photoshop]用Photoshop设计另类树皮人体 19、Photoshop]教你设计绚丽光芒效果 20、Photoshop]教你设计胶片风情电影海报 21、Photoshop]教你设计神秘炫光黑洞效果 22、Photoshop]PS特效字:闪亮钻石效果 23、[Photoshop]巧绘晶莹剔透的水晶樱桃 24、Fireworks]QQ空间初级玩家必学的11条技巧 25、Flash]给FLASH初学者的10点制作经验 26、Flash]Flash全屏效果全攻略 27、Photoshop]利用PS图层样式绘制彩色玻璃立体文字 28、Photoshop]Photoshop制作逼真的洁白羽毛 29、Photoshop]用PS把秋景照片变为冬景效果 30、[Photoshop]Photoshop教你给MM的衣服换个颜色 31、Photoshop]用PS制作周迅的怀旧效果图 32、Photoshop]转用PS轻松给MM衣服添加图案 33、Photoshop]用PS的动态画笔制作鞭炮 34、Photoshop]教你做天使翅膀的卡通效果 35、Photoshop]制作融化的冰淇淋 36、Photoshop]打造宇宙场景爆炸星球特效 37、Photoshop]教你设计恐怖电影海报 Photoshop]制作奔驰中的汽车 [Photoshop]蝴蝶结边框 [Photoshop]印章制作小教程(ps新手适用)[Photoshop]Photoshop高级柔化处理人物照片

个人简历特长怎么写_个人简历爱好特长范文

个人简历特长怎么写_个人简历爱好特长范文 简历是就业的敲门砖,也是体现个人能力、特长、兴趣、品行的精华浓缩版。下面小编分享了个人简历爱好特长范文,供你参考。 个人简历特长爱好写作技巧1、个人特长一定要写充实,有内容,有个性至少能在一定程度上反应个人的真实情况,不能需写、乱写。内容要真实可靠。 2、写强项 弱项不要写,面试人员说不定对哪个项目感兴趣,有时会跟你聊两句,尤其是接连几个、十几个面试之后,有些招聘人员爱聊一些轻松的话题,一旦聊到的是你的弱项,绝大部分人会很尴尬,显出窘态,丧失自信,这对你很不利。更重要的是,招聘人员会觉得你在撒谎。 3、强项要写也只写两到三项 因为极少有人能够达到”;十项全能”;水平。如果你觉得自己有很多强项,那么招聘经理会认为你的标准可能稍低了点儿。当然,确实有人有七八项强项,但一般人不相信个人强项特别多,所以你也没必要写那么多,以免给人轻浮的感觉。 4、个人特长有有一两行即可,不可太长 简历的格式应便于阅读,有吸引力。并使人对自己和自己的目标有良好的印象。在简历中要充分展示你的专业特长和一般特长,强调过去所取得的成绩。最好能写出三种以上的成绩和优点,并且要讲究材料的排列顺序。 5、不具体的爱好不写 这些都是非常宽泛的词语,比如你是钢琴九级,而你在简历中只说自己爱好音乐,很可能会被误解为你就是爱唱唱卡拉OK。不具体的爱好,通常会被大家理解为你根本就没有真正的爱好,更糟糕的是,人们会认为你的写作水平很差。 而阅读这样的爱好最好不写,哪个学生不是寒窗苦读才熬到今天,除非你对于某段历史、某种文学真的很有研究,否则建议不写为妙,要知道中资企业的人事经理大多都是文科出身,业务上不能把你考倒,文学方面鹿死谁手就不得而知了。 6、最好能写上一两项体育爱好

ListBox控件

ListBox控件 1.功能 ListBox控件显示较长的选项列表,用户可从中选择一项或多项。如果项总数超出可以显示的项数,则自动向ListBox控件添加滚动条。ListBox控件列表中的每个元素称为项。图1所示为ListBox控件。 图1 ListBox控件 2.属性 ListBox控件常用属性及说明如表1所示。 表1 ListBox控件常用属性及说明 下面对比较重要的属性进行详细介绍。 (1)Items属性。该属性用于查看列表框中的项。 语法: public ObjectCollection Items { get; } 属性值:ListBox.ObjectCollection表示ListBox中的项。 说明: ① 该属性使用户可以获取对当前存储在 ListBox 中的项列表的引用。通过此引用,可以在集合中添加项、移除项和获得项的计数。

② 可以使用DataSource属性来操控ListBox的项。如果使用DataSource属性向ListBox 添加项,则可以使用Items属性查看ListBox中的项,但不能使用 ListBox.ObjectCollection的方法向该列表添加项或从中移除项。 (2)SelectedItem属性。该属性表示当前选中的项。 语法: public Object SelectedItem { get; set; } 属性值:表示控件中当前选定内容的对象。 说明:对于标准 ListBox,可以使用此属性确定在ListBox中选定了哪个项。如果 ListBox 的SelectionMode属性设置为SelectionMode.MultiSimple或 SelectionMode.MultiExtended(它指示多重选择ListBox),并在该列表中选定了多个项,则此属性可返回任何选定的项。 示例 把左边的文本框中的内容移到右边的文本框中 本示例主要使用Items属性向ListBox1控件添加项,然后使用SelectedItem属性将ListBox1控件中的选中项添加到ListBox2控件中。示例运行结果如图2和图3所示。 图2 ListBox1中项移动前 图3 ListBox1中项移动后 程序主要代码如下: SqlConnection con = new SqlConnection("server=ZHY\\zhy;uid=sa;pwd=;database=student"); con.Open(); SqlCommand com = new SqlCommand("select * from student",con); SqlDataReader dr = com.ExecuteReader();

个人爱好及特长

个人爱好特长怎么写 个人爱好特长怎么写?一般来说是有什么写什么,当然要突出你在爱好中擅长什么,如果有什么爱好参加过比赛拿过奖也顺便写一下。这是总体的一般性的做法。 具体写的时候要区分具体情况,要结合所应聘的单位、工作岗位、工作职责等来具体突出某一方面,比如应聘销售工作,在爱好中就要突出与人打交道或交际能力的爱好,象爱好交友;如果是做行政工作,与公文打交道比较多,就说爱好看书、写作;如果单位经常组织活动,也喜欢有一些特长的职工,就突出如爱好体育、音乐之类的特长。我想也就是这样了,总之爱好要表现出自己的综合能力,也要与实际工作相结合。 简历爱好特长怎么写 “爱好与特长”在简历中的说服力不是很强,如果再不具体只能是浪费笔墨,甚至适得其反,所以在描述你的爱好与特长时一定要 注意以下问题。1)写强项。弱项不要写,面试人员说不定对哪个项目感兴趣,有时会跟你聊两句,尤其是接连几个、十几个面试 之后,有些招聘人员爱聊一些轻松的话题,一旦聊到的是你的弱项,绝大部分人会很尴尬,显出窘态,丧失自信,这对你很不利。 更重要的是,招聘人员会觉得你在撒谎。 2)强项要写也只写两到三项。 因为极少有人能够达到“十项全能”水平。如果你觉得自己有很多强项,那么招聘经理会认为你的标准可能稍低了点儿。当然,确

实有人有七八项强项,但一般人不相信个人强项特别多,所以你也没必要写那么多,以免给人轻浮的感觉。 3)不具体的爱好不写。 这些都是非常宽泛的词语,比如你是钢琴九级,而你在简历中只说自己爱好音乐,很可能会被误解为你就是爱唱唱卡拉ok。不具 体的爱好,通常会被大家理解为你根本就没有真正的爱好,更糟糕的是,人们会认为你的写作水平很差。 而阅读这样的爱好最好不写,哪个学生不是寒窗苦读才熬到今天?除非你对于某段历史、某种文学真的很有研究,否则建议不写为 妙,要知道中资企业的人事经理大多都是文科出身,业务上不能把你考倒,文学方面鹿死谁手就不得而知了。 4)最好能写上一两项体育爱好,否则招聘经理会认为你的体质很差不适合运动,或者你缺乏毅力不愿运动,因为有些工作需要经 常出差或者加班,如此高强度的工作可能你心有余而力不足,那么可能就不会聘用你。不妨写上羽毛球等日常生活中经常玩的运动 项目,既没有高抬自己大多数时间都在捡球的水平,又没有让招聘经理失望。

简历技能特长爱好怎么写

简历技能特长爱好怎么写 写一份好的简历,单独寄出或与求职信配套寄出,可以应聘自己感兴趣的职位。而简历中的特长爱好对求职者的面试也有一定的影响。那么,简历中的技能特长爱好怎么写呢?下面 就和我一起看看吧! 简历爱好特长怎么写 个人特长:绘图员(持有高级CAD证),学习课程有涉及监理,施工,设计 个人特长:熟悉应用AUTOCAD绘图软件和offic办公软件,个人工作态度认真,做事负责,责任心重,时间观念特强。 个人特长:责任感强,对团队合作意识强,对人与人之间关系处理强,能吃苦耐劳,熟练操作AutoCAD,photoshop, 3DS MAX,SketchUp。手绘能力一般。 个人特长:本人拥有较强的组织能力和适应能力、并具有较强的管理策划与组织管理协调能力。 个人特长: 1、专业知识牢固,曾在12年的“全国大学生英语知识竞赛”三等奖; 2、在校担任院社团联合会考评部部长一职,具有良好的 团队意识和沟通能力,带领本部门获得了“优秀部门”,本人也获得了“优秀部长”称号; 3、成绩优秀,曾获学院“三等奖学金”; 个人特长:熟悉财务管理、企业管理、人事管理的工作; 熟练使用EXCEL、WORD,用友通财务办公软件。 个人特长:我是2013应届毕业生,在毕业前除兼职外没

参加过其他工作,就兼职后自作自己的工作能力:具有良好的团体协作能力,沟通能力,执行能力,为人诚实可靠、品行端正、具有亲和力。 写个人特长时只要你个人会做的都可写上,在求职中一般只写与求职相关的能力! 个人爱好:听音乐,旅游。 个人爱好:画画,看小说,看日本动漫 个人爱好:打羽毛球上网 个人爱好:看书,唱歌,跑步 个人爱好:球类运动,唱歌,看书,学习。 个人爱好:爱好旅游,象棋,游泳,特长是乒乓球 个人爱好:喜欢语言学习;爱运动,乒乓和网球;性格外向,乐于交朋友。 个人爱好: 1、喜欢听歌,散步,打羽毛球;2、喜欢交朋友、有空也喜欢看书; 个人爱好只要你自己个喜欢的东西都可写,写好不写坏!

VB中ListBox的应用

https://www.wendangku.net/doc/6b16630905.html,入门——ListBox控件的使用 【字体大小:小中大】2008-02-18 19:56 来源:作者: ListBox(列表框)控件可以显示一组项目的列表,用户可以根据需要从中选择一个或多个选项。列表框可以为用户提供所有选项的列表。虽然也可设置列表框为多列列表的形式,但在缺省时列表框单列垂直显示所有的选项,如果项目数目超过了列表框可显示的数目,控件上将自动出现滚动条。这时用户可在列表中上、下、左、右滚动。ListBox控件在工具箱中的图标如图所示: 一、ListBox常用属性 1、BackColor 属性:用于显示ListBox控件中的文本和图形的背景颜色,默认为白色(Window) 2、BorderStyle 属性:控制在列表框ListBox周围绘制的边框的类型,其枚举值为下面三个: BorderStyle.None——无边框 BorderStyle.FixedSingle——单行边框 BorderStyle.Fixed3D——三维边框 默认值为BorderStyle.Fixed3D。 3、Font、ForeColor 属性:前者用于调整列表框中文本的字体,后者用于调整文本框中文本或者图形的前景色。 4、MultiColumn 属性:指示列表框中的项是否以水平的方式在列表框中显示,默认为False,此时所有的项都只显示为一列,当列表框无法显示全部的项的时候,将会出现一个垂直的滚动条;如果MultiColumn属性为True,则列表框以多列的形式来显示所有的项,如果一列无法全部显示完,则在水平位置重新显示一列,直到显示完毕为止,此时将会出现一个水平滚动条,如下图一所示:

塑料嵌件设计简介

塑料嵌件的设计 在很多塑件中,为了安装,联结等的需要,常常要在塑件中放置一些金属件或其他材质的零件,这些零件,统称为塑料制品中的嵌件。图所示就是一些嵌件的典型形状 (1) 嵌件的特点 1) 嵌件多用金属制成,它可以增加塑件整体或某一部位的强度和刚度,如在手柄、箱攀上使用的金属骨杆嵌件,见图所示。 2) 壳以提高联结强度塑料的强度很低,要想把两个塑件联结在一起,如用螺钉联接,其强度要受到影响,而在塑件中事先安放带螺纹的嵌件,可使联结强度大为提高,且经久耐川,见图中所示。 3) 塑料是很好的绝缘体,而在塑件中安放一些金属片、线、板等,使得在电子、电器、电力元器件上大有用途,如图中等。 4) 塑料的硬度较低,抵抗外力的能力较差,在需要提高硬度和耐磨性的位置安放合适的金属嵌件,将有效地提高嵌件的硬度和耐磨性。 (2) 嵌件的材料 制作嵌件的材料很多,金属材料和非金属材料均可制作嵌件,但多数以金属材料为主。常用的金属材料有钢、铜、铝等。其中,铜合金机械强度高,不生锈、易加工,是制作嵌件的常用材料;但是铜与塑料的热胀系数相差较大,结合牢固性较义;而铝,的热胀系数最大,与塑料的结合最牢固,也是常用材料,但强

度较低。 (3) 嵌件的设计要点 1) 金属嵌件嵌人塑料部分不能为尖角,应适当倒圆,以减少嵌件周围塑料冷却时产生的应力集中对塑件的影响,提高塑件强度 2) 如嵌件设泎塑件上的凸起部位时,其嵌入深度应大于凸起部位的高度,以保证嵌入塑件的机械强度,见图所示 3) 嵌件与塑件侧壁的间距一般不得小于0.6mm如塑件相对面都有嵌件, 则两嵌件间所隔塑料层厚不得少于3. 5mmo 4) 对于内、外螺纹嵌件,其高度应稍低于型腔的成型高度0.05mm 左右,以免压坏嵌件和模腔,见图所示。 1) 嵌件底面距塑件底面间的塑料层应有一定厚度,一般不小于嵌件外径的1/6,若厚度过小,塑件在此位置易产生凹痕和裂纹等缺陷。 2) 外螺纹嵌件,应设置一段无螺纹区,以防止熔料渗入模具内,见图所示。 (4) 嵌件的固定 1) 为了使嵌件与塑件结合紧密,嵌件表面应进行滚花或加工出沟槽,以增大摩擦力。使嵌件在使用中不易被拔出,不旋转等。 2) 为便于嵌件在模具中的安放和定位,嵌件安放于模具中的部分应设计成圆柱形,这样才便于将嵌件安放于模具上有关的定位圆孔中。 3) 为了使金属嵌件不被拔出,可在嵌件的中间部位车一环形槽,见图所示。

photoshop经典实例1000例

经典的1000条经典的PS实例 用Photoshop手绘头发是个制作难点,由于发丝的随意性与细节处理都很难,一般新手很难制作出满意的头发效果。所以本文将为您推荐一种制作发丝的步骤,很实用,可以在需要的时候参考教程制作出逼真的头发。 最终效果 1、新建一个大小为64 * 64像素的文档,放大到300%,选择铅笔工具,模式为“溶解”,画笔大小为1像素,如下图。 2、在图上胡乱点一些点。

3、选择滤镜 > 模糊 > 高斯模糊,数值为:0.4,效果如下图。 4、选择菜单:编辑 > 定义画笔,名字为“毛发”。接下来选画笔工具,模式为“正常”,在“画笔预设”窗口把间距设为1像素,如下图。 5、再把画笔存为新画笔,名字自定,把刚才那个名字为“毛发”的删除。这样画笔就制成了。

当然绘制头发还有一种不错的方法,就是复制路径。用路径选择工具点你要复制的路径,同时按住Alt键,移动鼠标,就能复制路径了。 现在开始制作头发: 1、选择你喜欢的头发颜色,我这里的颜色是:#69400A,用柔角的大笔触画出头发的大体形状。

2、用滴溅笔型的涂抹工具沿着头发的走势涂抹(涂抹工具模式为:正常,强度为:75%),这样头发的质感就差不多出来了。 3、现在,我们要把头发分成一簇簇地处理。用加深减淡工具把头发的层次分出来。

4、更深入仔细的刻画头发的明暗细节。 5、用减淡工具(2像素,高光,曝光度为:70%),画出几根反光较强的发丝。

6、现在,可以用我们刚才定义的笔刷画头发发丝了。随时根据明暗变化改变颜色来画,有的地方可以用模糊工具稍微处理一下,这样就不会突兀了。 7、稍作调整,换个背景,飞扬的发丝就完成了。

关于简历的个人特长及自我评价

关于简历的个人特长及自我评价 “爱好与特长”在简历中的说服力不是很强,如果再不具体只能是浪费笔墨,甚至适得其反,所以在描述你的爱好与特长时一定要注意以下问题。 1)写强项。 弱项不要写,面试人员说不定对哪个项目感兴趣,有时会跟你聊两句,尤其是接连几个、十几个面试之后,有些招聘人员爱聊一些轻松的话题,一旦聊到的是你的弱项,绝大部分人会很尴尬,显出窘态,丧失自信,这对你很不利。更重要的是,招聘人员会觉得你在撒谎。 2)强项要写也只写两到三项。 因为极少有人能够达到“十项全能”水平。如果你觉得自己有很多强项,那么招聘经理会认为你的标准可能稍低了点儿。当然,确实有人有七八项强项,但一般人不相信个人强项特别多,所以你也没必要写那么多,以免给人轻浮的感觉。 3)不具体的爱好不写。 这些都是非常宽泛的词语,比如你是钢琴九级,而你在简历中只说自己爱好音乐,很可能会被误解为你就是爱唱唱卡拉OK。不具体的爱好,通常会被大家理解为你根本就没有真正的爱好,更糟糕的是,人们会认为你的写作水平很差。

而阅读这样的爱好最好不写,哪个学生不是寒窗苦读才熬到今天?除非你对于某段历史、某种文学真的很有研究,否则建议不写为妙,要知道中资企业的人事经理大多都是文科出身,业务上不能把你考倒,文学方面鹿死谁手就不得而知了。 4)最好能写上一两项体育爱好,否则招聘经理会认为你的体质很差不适合运动,或者你缺乏毅力不愿运动,因为有些工作需要经常出差或者加班,如此高强度的工作可能你心有余而力不足,那么可能就不会聘用你。不妨写上羽毛球等日常生活中经常玩的运动项目,既没有高抬自己大多数时间都在捡球的水平,又没有让招聘经理失望。 临近毕业,总有很多的表格要填写。其中,简历中的特长与爱好,总有很多人不知道怎么填写,因为很多人没有发现自己的什么可以作为特长,爱好呢?怕写了给自己简历的印象降分。总的说来,就是抓准要点,适当夸张,不能与现实相差太大。 首先要明确专业不是特长,作为一个化学专业的学生来说,把做实验能力强作为自己的特长并不能让自己鹤立鸡群。如果你的专业素养很强的话,这个应该是在简历的其他板块加以强化。与此相对的是,特长的东西不一定就要达到专业水准。比如一个文科学生的计算机知识很丰富,也很喜欢钻研计算机问题,平常的软硬故障,网络问题都可以自己解决,但是没有经过系统的专业化的教育培训,与专业毕业

PS素材合成制作法打造月亮上的唯美婚纱照

PS素材合成制作法打造月亮上的唯美婚纱照 本例介绍运用PS CS3将冷冷的月亮打造成浪漫梦幻的场景效果,教程讲解了如何将一张月球的图片通过色彩平衡调色,再通过选区工具将月球改成月牙形状,然后用高斯模糊和星星笔刷作修饰,完成最初效果,还介绍了海上明月的制作方法,希望能给朋友们带来帮助~~ 最终效果: 海上升明月:月亮上的梦幻婚纱照-PS照片合成制作教程 1.我们先找一张月亮的图 2.因为背景是比较纯的黑色,所以我们可以用"魔棒工具",容差选10,在黑色的背景那点一下把背景框选出来 当然,边界会不太平滑,我们用"调整边缘",把"平滑",调到45以上,羽化1像素,收缩/扩展:30%

然后,ctrl+shift+I,反选,这样就把月亮选了出来,复制粘贴到新图层(图层1) 3.在图层1下面,新建一个"图层2",填充黑色 4.在图层1上,用"图像"-"调整"-"色彩平衡" "色彩平衡"参考数值是"阴影:-66,+15,+50","中间 调:-40,+35,+50","高光:-13,+23,+75" 5.按住ctrl点击"图层1",把月亮选出来,新建一个"图层3",填充黑色,再"ctrl+T"变换,W(宽)那填95%,H(高)那填90%

然后用"移动"工具把黑色的圆移到适合的位置,这步主要是为了直观的看清楚,把月亮的哪部分删去可以形成月弯 6.按住ctrl点击"图层3",把黑圆选出来,点"图层1",把选择的部分用Delete删掉,这样,我们就得到了一个蓝色的月牙然后,图层3可以删掉了 7.ctrl+J 把"图层1"复制一份,得到"图层1 副本" 在"图层1"那,用"滤镜"-"高斯模糊","半径":15,做个月亮外面的光晕 8.一个月亮有点孤单,我们可以用星星笔刷给月亮周围加点星星,不过不要太亮,免得抢走了主角的风采 进阶版 1.我们先按"ctrl+alt+C"调出"画布大小",把画布长度加长点,把加长的部分填充黑色

相关文档