VKP60LT515C中文资料

The VKP60LTC and VKP60MTC Series are

members of the VK high density DC/DC converter family. They are multiple output DC/DC convert-ers offered in both a 18-40 and 33-75 input voltage range. Their versatile architecture featur-ing fully isolated channels enables the system designer to utilize the converter in either a single, dual or triple output scheme without excessive minimum load requirements or cross regulation degradation.

The VKP60xTC’s architecture results in an economical and practical solution for use in dis-tributed power schemes for today’s demanding

telecommunication and electronic data process-ing applications requiring ground separation between noise sensitive digital logic and bipolar analog components. The VKP60xTC’s proprietary control circuity responds to 50-100% load steps in 35μSeconds to within 1% of nominal Vout. The peak deviation will not exceed 7% of Vout for pulsed load slew rates in excess of 75 Amps

per microsecond. The VKP60xTC is ideal for

electronic data processing applications utilizing modern disk drives and low voltage micro-processors that require dynamic load current response while maintaining tight output voltage

tolerances.

For full details go to

https://www.wendangku.net/doc/6d17680926.html,/rohs

SPECIFICATIONS, ALL MODELS

Speci?cations are at T CASE = +40°C nominal input voltage unless otherwise speci?ed.

* See Application Notes available on the web at https://www.wendangku.net/doc/6d17680926.html, ** X = Either L (24) or M (48)

* See Application Notes available on the web at https://www.wendangku.net/doc/6d17680926.html, ** X = Either L (24) or M (48)

SPECIFICATIONS, ALL MODELS

Speci?cations are at T CASE

= +40°C nominal input voltage unless otherwise speci?ed.

SPECIFICATIONS, ALL MODELS

Speci?cations are at T CASE = +40°C nominal input voltage unless otherwise speci?ed.

* See Application Notes available on the web at https://www.wendangku.net/doc/6d17680926.html, ** X = Either L (24) or M (48)

Case Temperature (°C)

Speci?cations are at T CASE

= +40°C nominal input voltage, nominal load, recommended external components applied, unless otherwise speci?ed.

(Refer to Application Note DCAN-9 at https://www.wendangku.net/doc/6d17680926.html,)

60 Watt Triple Output Half Brick DC/DC Converter

TYPICAL PERFORMANCE CURVES

VKP60xT512

VKP60xT515

VKP60xT312

VKP60xT315

60 Watt Triple Output Half Brick DC/DC Converter

Murata Power Solutions, Inc.

11 Cabot Boulevard, Mans?eld, MA 02048-1151 U.S.A.Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356

https://www.wendangku.net/doc/6d17680926.html, email: sales@https://www.wendangku.net/doc/6d17680926.html, ISO 9001 REGISTERED

3/06/08

Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Speci?cations are subject to change without notice. ? 2008 Murata Power Solutions, Inc.

USA: Tucson (AZ), Tel: (800) 547 2537, email: sales@https://www.wendangku.net/doc/6d17680926.html, Canada: Toronto, Tel: (866) 740 1232, email: toronto@https://www.wendangku.net/doc/6d17680926.html,

UK:

Milton Keynes, Tel: +44 (0)1908 615232, email: mk@https://www.wendangku.net/doc/6d17680926.html,

France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@https://www.wendangku.net/doc/6d17680926.html,

Germany: München, Tel: +49 (0)89-544334-0, email: ped.munich@https://www.wendangku.net/doc/6d17680926.html, Japan:

Tokyo, Tel: 3-3779-1031, email: sales_tokyo@https://www.wendangku.net/doc/6d17680926.html, Osaka, Tel: 6-6354-2025, email: sales_osaka@https://www.wendangku.net/doc/6d17680926.html, Website: www.murata-ps.jp

China:

Shanghai, Tel: +86 215 027 3678, email: shanghai@https://www.wendangku.net/doc/6d17680926.html,

Guangzhou, Tel: +86 208 221 8066, email: guangzhou@https://www.wendangku.net/doc/6d17680926.html,

PIN SIDE UP

PIN SIDE

DOWN

SIDE VIEW

NOTES:

All dimensions are in inches (millimeters).PIN PLACEMENT TOLERANCE: ± 0.005” MECHANICAL TOLERANCE: ± 0.015”

Marked with: speci?c model ordered, date code, job code.

MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is matte tin 100 microinches min., over nickel, 40-80 microinches.

[A] See Ordering Information on page 4 for available lead lengths.