I N D U S T R I A L A U T O M A T I O N & P R O C E S S C O N T R O L C A B L E S
18.96
F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1-800-B E L D E N -1? w w w.b e l d e n.c o m
711-A .59014.99.82020.83.47011.94.61015.491/2711-B .79020.07.06026.92.63016.00.84021.343/4711-C .93023.62 1.31033.27.83021.081.09027.691711-C2 1.26032.00 1.69042.93 1.10027.941.34034.041-1/4711-D 1.69042.93 2.06052.32 1.30033.021.61040.892711-E 2.05052.07 2.56065.02 1.81045.972.16054.862-1/2711-F 2.56065.02 3.07077.98 2.240
56.902.64067.06
3711-H 2.99075.95 3.52089.41Special Order 3-1/2711-J 3.50088.90 4.110104.39
Special Order
4
T echnical Information
Gland Information for Armored Cables
ST050-4621/2.52513.34.65016.51ST050-4641/2.60015.24.76019.30ST050-4651/2.72518.42.88522.48ST050-4661/2.82520.96.98525.02ST075-4673/4.88022.35 1.06527.05ST075-4683/4 1.02526.04 1.20530.61ST100-4691 1.18730.15 1.37534.93ST125-4701-1/4 1.35034.29 1.62541.28ST125-5501-1/4 1.50038.10 1.62541.28ST125-4711-1/4 1.60040.64 1.87547.63ST150-4721-1/2 1.70043.18 1.96549.91ST150-4731-1/2 1.90048.26 2.18755.55ST200-5512 1.90048.26 2.18755.55ST200-4742 2.10053.34 2.37560.33ST200-4752 2.30058.42 2.56565.15ST200-4762 2.50063.50 2.75069.85ST250-4772-1/2 2.38060.45 2.64067.06ST250-4782-1/2 2.58065.53 2.84072.14ST300-4793 2.79070.87 3.06077.72ST300-4803 3.00076.20 3.27083.06ST300-4813 3.21081.53
3.48088.39ST350-4823-1/2 3.42086.67 3.69093.73ST350-4833-1/2 3.61091.69 3.87098.30ST400-4844 3.81096.77
4.030102.36ST400-4854 3.965100.71 4.185106.30ST400-4864 4.120104.65 4.340110.24
Thomas and Betts
Hawke
1/2.440to .650TMC165TMCX165*3/4.600to .850TMC285TMCX285*1.800to 1.120TMC3112TMCX3112*1-1/4 1.100to 1.400TMC4140TMCX4140*1-1/2 1.330to 1.610TMC5161TMCX5161*2 1.570to 2.060TMC6206TMCX6206*2-1/2 1.930to 2.470TMC7247TMCX7247*3 2.450to 3.020TMC8302TMCX83023-1/2 2.950to 3.520TMC9352TMCX93524 3.500to 4.020TMC10402TMCX10402
*TMCX Catalog numbers listed are suitable for use with Type TC tray cable in hazardous locations when installed in accordance with NEC Articles 501-5(e) and 502-5. TMCX series is not suitable for use in Class III locations when used with tray cable.
Crouse Hinds
PS/PSX 45-05.3508.89.45011.431/2PS/PSX 55-05.45011.43.55013.971/2PS/PSX 65-05.55013.97.65016.511/2PS/PSX 75-05.65016.51.75019.051/2PS/PSX 85-05.75019.05.85021.591/2PS/PSX 95-05.85021.59.95024.131/2PS/PSX 99-07.85021.59.99025.153/4PS/PSX 107-07.92023.37 1.07027.183/4PS/PSX 113-07.98024.89 1.13028.703/4PS/PSX 121-07 1.07027.18 1.21030.733/4PS/PSX 112-10 1.00025.40 1.12028.451PS/PSX 125-10 1.12028.45 1.25031.251PS/PSX 138-10 1.22030.99 1.38035.051PS/PSX 138-12 1.28032.51 1.38035.051-1/4PS/PSX 156-12 1.38035.05 1.56039.621-1/4PS/PSX 174-12 1.56039.62 1.74044.201-1/4PS/PSX 188-12 1.74044.20 1.88047.751-1/4PS/PSX 174-15 1.60040.64 1.74044.201-1/2PS/PSX 188-15 1.74044.20 1.88047.751-1/2PS/PSX 200-15 1.88047.75 2.00050.801-1/2PS/PSX 218-15 2.00050.80 2.18055.371-1/2PS/PSX 219-20 2.05052.07 2.19055.632PS/PSX 236-20 2.19055.63 2.36059.942PS/PSX 247-20 2.35059.69 2.47062.742PS/PSX 261-20 2.47062.74 2.61066.292PS/PSX 263-25 2.46062.48 2.63066.802-1/2PS/PSX 280-25 2.62066.55 2.80071.122-1/2PS/PSX 296-25 2.80071.12 2.96075.182-1/2PS/PSX 297-30 2.80071.12 2.97075.443PS/PSX 311-30 2.95074.93 3.11078.993PS/PSX 327-30 3.10078.74 3.27083.063PS/PSX 343-30 3.26082.80 3.43087.123PS/PSX 359-30 3.42086.87 3.59091.193PS/PSX 375-35 3.52089.41 3.75095.253-1/2PS/PSX 392-35 3.75095.25 3.92099.573-1/2PS/PSX 412-35 3.90099.06 4.120104.653-1/2PS/PSX 423-40 4.050102.87 4.230107.444PS/PSX 437-40 4.200106.68 4.370111.004PS/PSX 451-40 4.340110.24 4.510114.554PS/PSX 462-40 4.430112.52 4.620117.354
**Use PS for non-hazardous locations and PSX for hazardous locations.
Adalet — PLM
I N D U S T R I A L A U T O M A T I O N & P R O C E S S C O N T R O L C A B L E S
18.97
18?I n d u s t r i a l C a b l e s
F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1-800-B E L D E N -1? w w w.b e l d e n.c o m
Low-Smoke, Zero-Halogen
Jacketed Cable Specifications
600V , 90°C TC-LS
NEC 340/UL 1277 & 1685
Instrumentation
●18 to 12 AWG, BC or TC ●90°C XLPE insulation
●UL 44 XHHW-2 — 90°C dry/wet ●Shielded or unshielded ●Haloarrest jacket
Control or Power
●14 to 4/0 AWG, BC or TC ●90°C XLPE insulation
●UL 44 XHHW-2 — 90°C dry/wet ●Shielded or unshielded ●Haloarrest jacket
T echnical Information
LSZH Jacketed Cables and Hazardous Locations Reference
Article 500
Class I Division 1 Hazards
●
Locations where flammable gases or vapors may exist under normal operating conditions, under frequent repair or maintenance operations, or where breakdown or faulty operation of process equipment
might also cause simultaneous failure of electrical equipment.●
Use conduit or MI cable with approved termination fittings.
Class I Division 2 Hazards
●
Locations where flammable gases,vapors or volatile liquids are handled either in a closed system, or confined within suitable enclosures, or where hazardous concentrations are normally prevented by positive mechanical
ventilation. Areas adjacent to Division 1areas belong in Division 2.●Use PLTC, ITC, TC, MC, MV, MI with approved termination fittings.
Class II Division 1
●
Locations where combustible dusts exist under normal conditions.●
Use conduit or MI with approved termination fittings.
Class II Division 2
●
Locations where combustible dusts exist under abnormal conditions.●
Use conduit or PLTC, ITC, TC, MC with ventilated channel cable trays.●
Use conduit or MC, MI with approved termination fittings.
Class III Division 1
●
Locations where easily ignitible fibers and flyings exist under normal conditions.
●
Use conduit or MC, MI with approved termination fittings.
Class III Division 2
●
Locations where easily ignitible fibers and flyings exist under abnormal conditions.●
Use conduit or MC, MI with approved termination fittings.
Article 504Intrinsically Safe
●
Equipment and wiring that are incapable of releasing sufficient electrical energy under normal or abnormal conditions to cause ignition of a specific hazardous atmospheric mixture in its most easily ignited concentration.
●
Use CL3, CL2, PLTC, TC or CM cable,colored light blue, with approved sealing and separation.
Hazardous Location Cable
Reference per Canadian Electrical Code CEC Section 18
All Armored cables printed “HL” per CSA C22.2 #174 are rated for all
Hazardous Location Classes and Divisions (ie. Class 1, Div. 1).
All Tray Cables printed “TC” per per CSA C22.2 #230 are rated for all
Hazardous Location Classes and Division 2or lower. (ie. Class 1, Div. 2 or lower).
XLPE Insulation Physical:(per UL-44)Tensile (min)1500 psi Elongation (min)150%Deformation (max) 3.35LOI
27
Haloarrest ? Jacket Physical
Tensile (min)1500 psi Elongation (min)100%Tear resistance 74 lbs/inch LOI 38Halogen Content IEC 754-10%BS64250%MIL-C-24643<0.2%NBS Smoke Chamber (.100″wall)Flaming Mode 141 D m corrected typical Smoldering Mode 311 D m corrected typical Acid Gas IEC 754-2 4.3 pH, 28 μS/cm VDE 0472 Part 813 4.3 pH, 27 μS/cm Toxicity Index NES 7131
Approvals and Standards/Performance Data for Low-Smoke, Zero-Halogen Jacketed Cable
Hazardous Locations Cable Reference
I N D U S T R I A L A U T O M A T I O N & P R O C E S S C O N T R O L C A B L E S
18.98
F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1-800-B E L D E N -1? w w w.b e l d e n.c o m
PVC-Nylon/PVC 75°C
90°C
UL 1685(THHN or THWN)FT4/
14 AWG & larger IEEE 1202/383ICEA T-29-520PVC-Nylon/PVC NA 90°C
UL 1685(TFN or TFFN)FT4/
16 & 18 AWG
IEEE 1202/383ICEA T-29-520
XLPE/PVC or CPE 90°C 90°C UL 1685(XHHW–2) FT4/14 AWG & larger IEEE 1202/383
VW-1 rated singles ICEA T-29-520XLPE/PVC or CPE 75°C
75°C
UL 1685(RFH–2)
FT4/
16 & 18 AWG
IEEE 1202/383VW-1 rated singles ICEA T-29-520
FRPO/PVC
—75°C UL 168518 AWG & larger TPE/TPE 75°C 90°C UL 1685FRPO/PVC 75°C 90°C UL 1685XLPE/Haloarrest 90°C
90°C
UL 1685
(XHHW-2)
FT4/IEEE 1202/38314 AWG & larger ICEA T-29-520XLPE/Haloarrest 75°C 75°C
UL 1685
(RFH-2)
FT4/IEEE 1202/38316 & 18 AWG ICEA T-29-520
FEP/PVC
90°C 90°C
UL 1685
T echnical Information
XLPE/PVC 90°C XLPE/CPE 90°C PVC/PVC 105°C PVC/CPE 105°C PE/PVC 75°C FPE/PVC 75°C TPE/TPE 105°C XLPE/Haloarrest ? 90°C FEP/FEP
200°C
Flame Test Chamber Vertical Tray
Vertical Tray
Vertical Tray
Vertical Tray Vertical Tray Burner Type
Ribbon gas burner Ribbon gas burner Ribbon gas burner Ribbon gas burner Ribbon gas burner Theoretical Heat Input 70,000 BTU/hr 70,000 BTU/hr 70,000 BTU/hr 70,000 BTU/hr 210,000 BTU/hr
Burner Positioning
horizontal 3″20°up from horizontal 3″horizontal horizontal 8-1/4″from samples horizontal 2.95″from samples 2.95″from from cable surface from cable surface 18″above cable surface 12-1/4″above 18″from tray base 11.8" above floor tray bottom 23.6″above floor tray base Tray Dimensions
8′length 9.84′length 8′length 11.5′length 8′length 12″ width
11.81″width
12″width
19.7″width 12″width 3″side flanges 2.85″side flanges 3″side flanges none 3″side flanges Sample Spacing 1/2 cable diameter 1/2 cable diameter 1/2 cable diameter lesser of 1/2 cable 1/2 cable diameter diameter and .78″Duration of
20 minutes 20 minutes 20 minutes 20 minutes 20 minutes Flame Application Mode of Failure
Cable blistering or Cable char has Cable blistering or Cable charring has Cable blistering or charring has reached exceeded a length charring has reached reached a height of charring has reached the top of the sample of 4.92′.
the top of the sample 98.4″above the
the top of the sample after the cable has after the cable has bottom of the burner.
after the cable has self-extinguished.
self-extinguished.
self-extinguished.
Vertical Tray Flame Test Comparison
UL Approved Insulation/Jacketing Options
Abbreviations Key
CPE Chlorinated Polyethylene FEP Fluorinated Ethylene-propylene FPE Foam Polyethylene FRPO Flame-Retardant Polyolefin PE Polyethylene
PVC
Polyvinyl Chloride
Nylon insulated singles are type THHN or THWN for conductors 14 AWG or larg-er. Conductor sizes 16 and 18 AWG are Type TFN or TFFN singles. TPE Thermoplastic Elastomer
XLPE
Cross-Linked Polyethylene
Cross-Linked Polyethylene (XLPE) insulated singles are type XHHW-2
for conductors 14 AWG or larger. Conductor sizes 16 and 18 AWG are RFH-2.