FA0108RN02QE中文资料

Rotary

Models Available

Features/Benefits

?Multi-pole and multi-position ?Panel and PCB mounting ?Positive detent

?Value added capability

Typical Applications ?Small appliances ?Testing fixtures ?Safety equipment

Specifications

CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or

28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-44 for additional ratings.

ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.CONTACT RESISTANCE: Below 10 m ?typ. initial @

2-4 V DC, 100 mA, for both silver and gold plated contacts.INSULATION RESISTANCE: 109?min.

DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.

INDEXING: 45o or 90o -one contact models; two contact models,

4 pos. max. Models with common terminal -90o, 4 pos. max.OPERATING & STORAGE TEMPERATURE: -30oC to 65oC

Materials

HOUSING & BUSHING: 6/6 Nylon (UL 94V-2).ACTUATOR: 6/6 nylon (UL 94V-2).

CONTACTS: Q contact material: Copper, silver plated. See page

L-44 for additional contact materials.

TERMINALS: Q contact material: Copper, silver plated. See page

L-44 for additional contact materials.

CONTACT SPRING: Music wire or stainless steel.MOUNTING NUT: Brass, nickel plated.TERMINAL SEAL: Epoxy.

NOTE:Any models supplied with Q or B contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: https://www.wendangku.net/doc/711250268.html,/rohs.NOTE:Specifications and materials listed above are for switches with standard options.For information on specific and custom switches, consult Custome Service Center.

Build-A-Switch

T o order , simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L-42 thru L-44. For additional options not shown in catalog, consult Customer Service Center .

Switch Function

FA05SP ,90°Index,3 pos.F103SP ,45°Index,3 pos.F203DP ,45°Index,3 pos.

FA01SPDT,90°Index

FC03SP ,W/Common 90°Index,3 pos.

Terminations 02

PC Thru-hole WC Wire lead

Seal

NONE No seal E Epoxy seal

Contact Material Q Silver B Gold Actuator

15S crewdriver slot without bushing

08.585" high with .156" flat

Mounting Style RN PC

RS

5/16-32 threaded bushing

R o t a r y

C&K F Series

Miniature ROTA-SLIDE ? Rotary Switches

45o INDEXING SCHEMATICS

F1XX MODELS F2XX MODELS

FA01 MODEL FA05 MODEL

FCXX MODEL

C= Common T erminal

9

0oIN DEX ING S C H EMA TI C S

7

6

5

8

3

4

2

Break-before-make contacts. Terminal numbers are molded on bottom of housing. Actuators are shown in position 1.

F1XX, F2XX models: No common terminal is present.Switching function is provided by movable contacts shorting adjacent pairs of stationary contacts.

NOTE:*Switches with ‘02’ PC terminations have additional terminal no. 5 as switch support only.

This terminal is not connected electrically inside switch.

Break-before-make contacts. Terminal numbers are molded on bottom of housing. Actuators are shown in position 1.

FAXX models: No common terminal is present.

Switching function is provided by movable contacts shorting adjacent pairs of stationary contacts.

FCXX models: Common terminal is present.

NOTE: *Switches with ‘02’ PC terminations have additional terminal no. 5 as switch support only.

This terminal is not connected electrically inside switch.

Part number show: FC0315RN02Q

Rotary

C&K F Series

Miniature ROTA-SLIDE ? Rotary Switches

15

SCREWDRIVER SLOT WITHOUT BUSHING

08

.585" HIGH WITH .156" FLA

Shown with ‘RN’ mounting style; not available with ‘RS’ mounting style or FCXX models.

Must be ordered with ‘RS’ mounting style.

R o t a r y

C&K F Series

Miniature ROTA-SLIDE ? Rotary Switches

E

EPOXY SEAL

NONE

NO SEAL

Not available on FCXX models.

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.

1CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.

2 CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).

All models with all options when ordered with ‘Q’ contact material.

Any models supplied with Q or B contact material are RoHS compliant. For the

latest information regarding RoHS compliance, please go to: https://www.wendangku.net/doc/711250268.html,/rohs.

CONTACT AND OPTION CODE TERMINAL MATERIAL

RATING

Q 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA).LOW LEVEL/DRY CIRCUIT

B

SILVER 2POWER

0.4 VA MAX. @ 20 V AC or DC MAX.

RoHS COMPLIANT*

RoHS

COMPATIBLE*

YES YES YES

YES

G OLD

1