PD09-73,PD09-73LF:Two-Way 0° Power Splitter/Combiner 0.81–0.96 GHz
DATA SHEET
Electrical Specifications at 25 °C
Z = 50 ?,
unless otherwise noted
Features
●
Low cost ●Low profile
●Available in small SOT-6 package ●Available on tape and reel
●Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020
Description
The PD09-73 is a monolithic two-way in-phase hybrid junction tuned for the 0.81–0.96 GHz band.It offers low loss,high isolation,good input/output matching,and exceptional phase/ amplitude balance.It is available in the SOT-6 surface mount package.
GND
GND IN/SUM
Pin Out
IN/SUM
Port 1
Port 2
Block Diagram
Skyworks offers lead (Pb)-free,RoHS (Restriction of Hazardous Substances)-compliant packaging.
NEW
DATA SHEET ? PD09-73,PD09-73LF
-4.0-3.8-3.6-3.4-3.2
-3.00.80
0.850.900.95 1.00
Frequency (GHz)I n s e r t i o n L o s s (d B )
Insertion Loss vs. Frequency
Port 1Port 2
0.80
0.850.900.95 1.00
Frequency (GHz)-50-40-30-20-10
0I s o l a t i o n (d B )
Isolation vs. Frequency
0.80
0.85
0.90
0.95
1.00
Frequency (GHz)
1.01.11.2
1.31.4
1.5O u t p u t V S W R
Output VSWR vs. Frequency
Port 1
Port 2
0.80
0.850.900.95 1.00
Frequency (GHz)
-0.10
-0.05
0.05
0.10
A m p .
B a l a n c e (d B )
Amp. Balance vs. Frequency
0.80
0.850.900.95 1.00Frequency (GHz)1.01.11.21.31.4
1.5I n p u t V S W R
Input VSWR vs. Frequency 0.80
0.850.900.95 1.00
Frequency (GHz)
-3-2-1012
3P h a s e B a l a n c e (D e g .)
Phase Balance vs. Frequency
Typical Performance Data
Z O = 50 ?,unless otherwise noted
DATA SHEET ? PD09-73,PD09-73LF
Characteristic Value
Input power(1) 1.5 W CW
Input power(2)0.75 CW Operating temperature-40 °C to +85 °C Storage temperature-65 °C to +150 °C Absolute Maximum Ratings
1.When used as a power divider with a
2.0:1 maximum VSWR on all ports.
2.When used as a power combiner with a 2.0:1 maximum VSWR on all ports. Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as possible,ESD (Electrostatic Discharge) can damage
this device.This device must be protected at all times
from ESD.Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment,which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Recommended Board Layout
Material is 10 mil FR4.
SOT-6
0.106 (2.70 mm)0.004 (0.10 mm)
0.014
0.004
Re c ommen d e d S ol d er Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”Application Note.
Tape an d Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note.
DATA SHEET ? PD09-73,PD09-73LF
Copyright ? 2002,2003,2004,2005,Skyworks Solutions,Inc.All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions,Inc.(“Skyworks”) products or services.These materials,including the information contained herein,are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer.Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein.Skyworks may change its documentation,products,services,specifications or product descriptions at any time,without notice.Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts,incompatibilities,or other difficulties arising from any future changes.
No license,whether express,implied,by estoppel or otherwise,is granted to any intellectual property rights by this document.Skyworks assumes no liability for any materials,products or information provided hereunder,including the sale,distribution,reproduction or use of Skyworks products,information or materials,except as may be provided in Skyworks Terms and Conditions of Sale.
THE MATERIALS,PRODUCTS AND INFORMATION ARE PROVIDED “AS IS”WITHOUT WARRANTY OF ANY KIND,WHETHER EXPRESS,IMPLIED,STATUTORY,OR OTHERWISE,INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE,MERCHANTABILITY,PERFORMANCE,QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION,TEXT,GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS.SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES,INCLUDING BUT NOT LIMITED TO ANY SPECIAL,INDIRECT,INCIDENTAL,STATUTORY,OR CONSEQUENTIAL DAMAGES,INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION,WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical,lifesaving or life-sustaining applications,or other equipment in which the failure of the Skyworks products could lead to personal injury, death,physical or environmental damage.Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products,which may deviate from published specifications as a result of design defects,errors,or operation of products outside of published parameters or design specifications.Customers should include design and operating safeguards to minimize these and other risks.Skyworks assumes no liability for applications assistance,customer product design,or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks,the Skyworks symbol,“Breakthrough Simplicity”and “Innovation to Go”are trademarks or registered trademarks of Skyworks Solutions,Inc.,in the United States and other countries.Third-party brands and names are for identification purposes only,and are the property of their respective owners.Additional information,including relevant terms and conditions,posted at
https://www.wendangku.net/doc/744707786.html,,are incorporated by reference.