Total Flow Control Solutions?Off-the-shelf standard valve incorporates many special features.
Copyright ?2004 Tyco Flow Control.All rights reserved.KTMMC-0160-US-0407
Copyright ?2004 Tyco Flow Control.All rights reserved.
KTMMC-0160
2
Parts and Materials
Materials of Construction Materials
No Part Name Stainless Steel Body WCB Body Qty 1Body A351 Gr CF8M A216 Gr WCB 12Cap A351 Gr CF8M A216 Gr WCB 13Ball A351 Gr CF8M A351 Gr CF8M 14Stem A 276 Type 316
A 276 Type 316
15Seat PTFE/PFA Copolymer PTFE/PFA Copolymer 261Body seal PTFE
PTFE
17Stud A 193 Gr B8 A 193 Gr B7 4 - 127a Nut
A 194 Gr 8
A 194 Gr 2H 4 - 128Lower thrust washer 50% SS/50% PTFE 50% SS/50% PTFE 19Compress ring SUS 316
SUS 316
1101Upper thrust washer PTFE/PFA Copolymer PTFE/PFA Copolymer 1111V-ring stem packing PTFE PTFE 1 set 12Thrust washer PEEK PEEK 113Gland
SUS 304SUS 304114Belleville washer SUS 301SUS 301215Stem nut SUS 304SUS 304 1 - 216Static ball SUS 304SUS 304117Lock saddle SUS 304SUS 304118Stop bolt
SUS 304SUS 304119Handle (1/2”- 2”)SUS 304SUS 304120Handle sleeve (1/2”- 2”)Vinyl
Vinyl
121Handle (21/2”- 8”)SGP Zn Plating SGP Zn Plating 122Handle adapter (21/2”- 8”)CF8 (21/2”- 4”)A536 (6”- 8”)123Triangle stopper SUS 304SUS 304124
Bolt (21/2”- 8”)
SUS 304
SUS 304
1
Handle for valve size 21/2”- 8”[65 - 200 mm]
- 2”[15 - 50 mm]
1.Option — For fire tested to API 607 4th edition, packing material will be changed to Graphite.
2.Other body materials available.
Notes
Specifications
D C g f d T N m : Flange outside diameter : Bolt pitch circle
: Raised face diameter : Raised face height : Bore diameter : Flange thickness : Number of bolt : Bolt hole diameter
ANSI Class 150 Dimensions [mm]
151510890.01258960.535 1.611.241622.512.02 6.330F04M52202011793.51259870.043 1.611.241622.012.52 6.330F04M532525127104.015110879.551 1.611.241623.513.038.035F05M644038165124.518412798.573 1.614.341627.014.039.555F07M875050178133.0184152120.592 1.615.941927.014.039.555F07M886564190162.0495178139.5105 1.617.541946.024.5317.070F10M101480
76
203172.0495190152.5127 1.619.141946.025.0317.070F10M1018100100229197.0595229190.5157 1.623.981952.030.0317.070F10M1027150150394280.0
800
279241.5216 1.625.482268.041.0323.085F12M12
75
200201
457
315.01,100343
298.5
270
1.6
28.6
8
22
68.0
41.0
3
23.0
85
F12
M12128
ANSI Class 150 Dimensions (inches)
Valve d L H W D C g f T N m H1H2H3SW U ISO M Wt.Size
(Ibs)1/2”0.59 4.25 3.54 4.92 3.50 2.38 1.380.060.4440.620.890.470.080.25 1.18F04M543/4”
0.79 4.62 3.68 4.92 3.88 2.75 1.690.060.4440.620.870.490.080.25 1.18F04M571” 1.00 5.00 4.09 5.94 4.25 3.12 2.000.060.4440.620.930.510.120.31 1.38F05M6911/2” 1.50 6.50 4.907.24 5.00 3.88 2.880.060.5640.62 1.060.550.120.37 2.17F07M8152” 2.007.00 5.247.24 6.00 4.75 3.620.060.6240.75 1.060.550.120.37 2.17F07M81821/2” 2.507.50 6.3819.497.00 5.50 4.120.060.6940.75 1.810.960.120.67 2.76F10M10313” 3.008.00 6.7719.497.50 6.00 5.000.060.7540.75 1.810.980.120.67 2.76F10M10
40
4” 4.009.007.7623.439.007.50 6.190.060.9480.75 2.05 1.180.120.67 2.76F10M10606” 6.0015.5011.0631.5011.009.508.500.06 1.0080.88 2.68 1.610.120.91 3.35F12M121658”
8.00
18.00
12.48
43.31
13.50
11.75
10.62
0.06
1.12
8
0.88
2.68
1.61
0.12
0.91
3.35
F12
M12282
Top Works
Flange End Size 1/2”- 2”[15 - 50 mm]Size 21/2”- 8”[65 - 200 mm]
Copyright ?2004 Tyco Flow Control.All rights reserved.
KTMMC-0160
4
https://www.wendangku.net/doc/7a6054384.html,
Tyco Valves & Controls
Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy.This data sheet is intended only as a guide to TFC products and servic-es.Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements.TFC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS.ACCORDINGL Y , TFC WILL NOT BE RESPONSIBLE FOR DAM-AGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION.Patents and Patents Pending in the U.S.and foreign countries.Tyco reserves the right to change product designs and specifications without notice.
Main Features of Sealmaster Patented Stem Seal Arrangement
?“Multiple ”sealings up to 6 areas (see Views 1-6) for pressure and high vacuum.
?Encapsulated “Static ”sealing achieved on upper thrust seal.
?Constant sealing force reflects to stem (see arrow) and makes stem primary sealing “Positive ”.
?Excellent wear resistance on lower thrust seal (50%SS filled PTFE), 1000 times greater than that of PTFE to prolong the compensation of Belleville washers.
Stem Sealing
The live-loaded SealMaster is a combination of three
components:(A) a cup and cone PFA/TFE upper thrust seal;(B) a cup and cone sintered stainless steel 316 center load ring,and (C) a flat stainless steel/TFE lower thrust seal.When
tightened, the live loaded stem pulls up, compressing the stem thrust seal.As this happens, material from uppper and lower thrust seal extrudes between stem and body enclosures (see Views 1-6).The surfaces between the bottom of the lower thrust seal and top of the stem flange are smooth and all rotation
occurs between these two surfaces, leaving the stem thrust seal “static”to create the best possible seal.As rotation continues,components bed in and keep seal performance constant with usage.As operating wear takes place, the stem thrust seal can be re-tightened to recommended torques multiple times.