Pushbutton
Features/Benefits ?Positive tactile feel
?Multi-positions available
?Wide variety of termination options ?Epoxy terminal seal compatible with
bottom wash cleaning
?RoHS compliant models available
Typical Applications ?Instrumentation
?Computer peripherals
?Telecommunications equipment
Specifications
CONTACT RATING: B contact material (8X25 Models): 0.4 VA max.
@ 20 V AC or DC maximum. G contact material (8X21, U8X1Models): 1 AMP @ 120 V AC or 28 V DC or 0.4 VA max. @ 20 V AC or DC max. Note: Break-before-makecontacts. Multi-pole contacts do not make and break simultaneously. See page A-43for additional ratings.
ELECTRICAL LIFE: 60,000 make-and-break cycles at full load.CONTACT RESISTANCE: Below 50 m ?typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.INSULATION RESISTANCE: 109?min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: 8X2X MODELS: –30oC to 75oC.
U8X1 MODELS: –30oC to 65oC.
CAP INSTALLATION FORCE: 10 lbs. max. permissible.
SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E
method 9 (1 hour steam aging).
NOTE:Any models supplied with B, P , R, or G contact material are RoHS compliant. NOTE:Specifications and materials listed above are for switches with standard options.For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),
flame retardant (UL 94V-0).
PLUNGER: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0).CAP & FRAME: Nylon, black, standard.BUSHING: Brass or zinc, nickel plated.HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
N.O. & N.C. CONTACTS: 8X21, U8X1 MODELS: G contact material:
Coin silver, with gold plate over nickel plate. See page A-43 for additional contact materials.
8X25 MODELS: B contact material: Copper alloy, with gold plate over nickel plate. See page A-43 for additional contact https://www.wendangku.net/doc/756529248.html,MON CONTACT & ALL TERMINALS: Copper alloy, with gold
plate over nickel plate.TERMINAL SEAL: Epoxy. Refer to slodering and cleaning
Technical Data Chapter.
HARDWARE: Nut & Locking Ring: Brass, nickel plated;
Lockwasher: Steel, nickel plated.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-30 thru A-45. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
8121SPDT On-Mom.1 Amp 8125SPDT On-Mom.0.4VA 8221DPDT On-Mom.1 Amp 8225DPDT On-Mom.0.4VA 83213PDT On-Mom.1 Amp 83253PDT On-Mom.
0.4VA 84214PDT On-Mom.1 Amp 8425
4PDT On-Mom.0.4VA
Note:UL/CSA models available, see page A-30 and A-31.
Actuator or Plunger S Plunger NONE Snap-in J80Snap-in
J81Snap-in w/frame
J82Snap-in w/frame for LED J83Snap-in w/frame &
flush cap
J84Snap-in w/frame for LED,
flush cap
J85
Snap-in w/frame & LED J95PC w/V-bracket & LED L Plunger
M Snap-fitting plunger
Bushing
D9.280" high,keyway H .250" high,flat NONE No bushing
choice required D .280" high,keyway D2.288" high,flat D3.180" high D8.288" high,flat
H9.250" high,flat,hi torque Y .350" high,keyway Y3 6.35mm high,
keyway,hi torque
Y4.378" high,flat,hi torque Y9.350" high,keyway
Contact Material B Gold
P Gold,matte-tin G Gold over silver R Gold over silver,matte-tin
Seal E Epoxy
I Epoxy potted base
Cap Color 2Black
NONE Models without caps 1White 3Red 4Orange 5Yellow 6Green 7Blue 9Gray
Frame Color 2Black
NONE Models without frame 1White 3Red 5Yellow 6Green 9Gray
LED Color 3Red
NONE Models
without LED 5Yellow 6Green
Models Available
Right angle,PC thru-hole
AV2Vertical right angle,PC thru-hole C PC Thru-hole Z Solder lug
A2Right angle,PC thru-hole
A3Right angle,snap-in,PC thru-hole
A4Right angle,PC thru-hole,reversed terminals A6Right angle,PC thru-hole
AV Vertical right angle,PC thru-hole AV1Vertical right angle,PC thru-hole
AV3Vertical right angle,snap-in,PC thru-hole R Right angle with PCB
R2Right angle with PCB,reversed terminals V2.555" high,V-bracket V3.460" high,V-bracket V4.630" high,V-bracket V6.460" high,V-bracket V7.630" high,V-bracket V8.953" high,V-bracket V9
1.150" high,V-bracket
V31.460" high,snap-in V-bracket V61.460" high,snap-in V-bracket W .750" long,wire wrap W1.964" long,wire wrap W3.425" long,wire wrap W41.062" long,wire wrap Z3Quick connect
MOM. = Momentary
*U811 thru U841 model numbers with all options (except R, R2 terminations)when ordered with G ,L or R contact material.
P u s h b u t t o n
MOM. = Momentary
* U811 thru U841 model numbers
with all options (except R, R2 terminations)
when ordered with G, L or R contact material.
8X25 models must be ordered with B or P contact material.
8X21 and U8X1 models must be ordered with G or R contact material.
Pushbutton
**
PANEL MOUNTING
J83
SNAP-IN WITH FRAME AND FLUSH CAP
LED not included.
For LED information, see page A-45.
LED not included.
For LED information, see page A-45.
J84
SNAP-IN WITH FRAME FOR LED, FLUSH CAP
J82
SNAP-IN WITH FRAME FOR LED
Other colors available, consult Customer Service Center. Cap and Frame Finish: matte.
Available with C, W-W4, Z or Z3 terminations and SPDT and DPDT models only.
NOTE:Caps and frames available separately,see pages A-44 and A-45.
2BLACK 1WHITE 3RED 4ORANGE 5YELLOW 6GREEN 7BLUE 9
GRAY
CAP AND FRAME
COLOR OPTION CODE P u s h b u t t o n
*
* Increase this dim. to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
PANEL MOUNTING
PC MOUNTING
J85
SNAP-IN WITH FRAME AND LED
J95
PC WITH V-BRACKET AND LED
Available with C, W-W4, Z or Z3 terminations and SPDT models only.For LED information see page A-45.NOTE:Caps & frames available
separately, see pages A-44 and A-45.
For LED information see page A-43.
2BLACK 1WHITE 3RED 4ORANGE 5YELLOW 6GREEN 7BLUE 9
GRAY
CAP AND FRAME
COLOR OPTION CODE
3RED 5YELLOW 6
GREEN
LED COLOR OPTION CODE
NOTE:Caps available separately, see page A-44.
Available with V3 terminations and SPDT models only.
For LED information see page A-45.
2BLACK 1WHITE 3RED 4ORANGE 5YELLOW 6GREEN 7BLUE 9
GRAY
CAP AND FRAME
COLOR OPTION CODE 3RED 5YELLOW 6
GREEN
LED COLOR OPTION CODE
8121J85ZGE223SPST
8121J95V3GE23SPST
Pushbutton
1/4-40 UNS-2A
NONE NO BUSHING
CHOICE REQUIRED
(JXX ACTUATORS)
Y9.350" HIGH UNTHREADED, KEYWAY
H9.250"HIGH UNTHREADED, FLAT
H.250"HIGH THREADED, FLAT Y.350" HIGH THREADED, KEYWAY
D9.280" HIGH UNTHREADED,
KEYWAY
D.280" HIGH THREADED, KEYWAY
M SNAP-FITTING PLUNGER
L PLUNGER
NONE NO PLUNGER CHOICE REQUIRED
(JXX ACTUATORS)
S PLUNGER
D, D9.244 (6,20).228 (5,79).224 (5,69)
H, H9.218 (5,54).202 (5,13).198 (5,03)
Y, Y9.203 (5,16).187 (4,75).183 (4,65)
Y3(5,54)(5,13)(5,03)
Y4.185 (4,70).169 (4,29).165 (4,19)
D2, D8N/A.232 (5,89).228 (5,79)
D3N/A.162 (4,11).158 (4,01)
DIM. ‘A’
FOR V3-V61
TERMINATIONS
DIM. ‘A’
FOR A, A2, A3, A4, A6,
AV-A3, R & R2
TERMINATIONS
DIM. ‘A’
FOR C, W-W4, Z & Z3
TERMINATIONS
AVAILABLE
BUSHINGS
Y, Y9.178 (4,52).162 (4,11).158 (4,01)
Y4.090 (2,29).074 (1,88).070 (1,78)
DIM. ‘B’
FOR V3-V61
TERMINATIONS
DIM. ‘B’
FOR A, A2, A3, A4, A6,
AV-A3, R & R2
TERMINATIONS
DIM. ‘B’
FOR C, W-W4, Z & Z3
TERMINATIONS
AVAILABLE
BUSHINGS
NOTE:When selecting plunger option, bushing selection must also be made, see next page. No plunger option is required when any
JXX actuator option is selected. Additional plunger lengths are available on SPDT and DPDT models, consult Customer Service Center.
Not all plunger lengths sufficient for use with caps, see page A-44.
H bushing standard with C, W-W4, Z or Z3 terminations.
H, H9 bushings not available on single pole models with
A3-A6, R, R2 terminations.
Will withstand 12 in./lbs. of torque with
no distortion.
D9 bushing standard with A-A6,
R, R2 AV-AV3 terminations.
P
u
s
h
b
u
t
t
o
n
1/4-40 UNS-2A
D3
.180" HIGH UNTHREADED
D8
.288" HIGH UNTHREADED, FLAT
D2.288" HIGH THREADED, FLAT Y4
.378" HIGH THREADED, FLAT
Y3
6.35mm THREADED, KEYWAY
NOTE:Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings.
Optional mounting nut and locking ring styles available, see section “Technical Data and Additional Hardware”.
Y3 & Y4 bushings not available on single pole models with A3-A6, R, R2 terminations. Will withstand 12 in./lbs. of torque with no distortion.
D2, D8 bushings not available with C, W-W4, Z, Z3 terminations.
D3 bushing available with A, A2, A3, AV , AV2, AV3 and Pushbutton
PC MOUNTING
PC MOUNTING
SECTION A-A A3RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
A RIGHT ANGLE, PC THRU-HOLE
A RIGHT ANGLE, PC THRU-HOLE
A3RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
8121SD9AGE
SPDT
8221SD9AGE
DPDT
Not available with JXX actuators and I seal option.
Terminal bend radii and lead-in manufacturing option.
P
u
s
h
b
u
t
t
o
n
SECTION A-A
8121SD9A2GE SPDT
8121SD9A4GE SPDT
A4
RIGHT ANGLE, PC THRU-HOLE, REVERSED TERMINALS
A2
RIGHT ANGLE, PC THRU-HOLE
A
RIGHT ANGLE, PC THRU-HOLE
Not available with JXX actuators and I seal option.Terminal bend radii and lead-in manufacturing option.
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal.Terminal bend radii and lead-in manufacturing option.
The A4 and R2 termination options are functionally identical and fit the same PC mounting pattern.The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the switch support legs. Unlike the R2, the A4 option is available with UL/CSA.
Pushbutton
PC MOUNTING
PC MOUNTING
Reversed terminals
PC MOUNTING
PC MOUNTING
AV
VERTICAL RIGHT ANGLE, PC THRU-HOLE, .100" PITCH
A6
RIGHT ANGLE, PC THRU-HOLE
R2
RIGHT ANGLE WITH PCB, REVERSED TERMINALS
R
RIGHT ANGLE WITH PCB
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal.Terminal bend radii and lead-in manufacturing option.
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option.R termination not UL/CSA approved.
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option.R2 termination not UL/CSA approved.
The A6 and R termination options are functionally identical and fit the same PC mounting pattern,The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the switch support legs. Unlike the R, the A6 option is available with UL/CSA.
8121SD9A6GE SPDT
8121SD9RGE SPDT
8121SD9R2GE SPDT
P u s h b u t t o n
.15 (3,8)
.33 TYP .
(8,4)
PC MOUNTING
PC MOUNTING
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH
AV1
VERTICAL RIGHT ANGLE, EXTENDED,PC THRU-HOLE, .150" PITCH
AV3
VERTICAL RIGHT ANGLE, SNAP-IN,,PC THRU-HOLE, .150" PITCH
AV1
VERTICAL RIGHT ANGLE, EXTENDED,PC THRU-HOLE, .150" PITCH
AV3
VERTICAL RIGHT ANGLE, SNAP-IN,PC THRU-HOLE, .150" PITCH
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH
8121SD9AV2GE SPDT
8221SD9AV2GE DPDT
Not available with JXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
Pushbutton
.15 (3,8)
.33 TYP.
(8,4)
PC MOUNTING
PC MOUNTING
PC MOUNTING 8321SD9AV2GE
3PDT
8421SD9AV2GE
4PDT
8121SD3__GE
SPDT
AV2VERTICAL RIGHT
AV1VERTICAL RIGHT ANGLE, EXTENDED,
PC THRU-HOLE, .150" PITCH
AV3VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150" PITCH
V2, V6, V7, V8VERTICAL MOUNT, V-BRACKET
V61
AV1VERTICAL RIGHT ANGLE, EXTENDED,
PC THRU-HOLE, .150" PITCH
AV3VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150" PITCH
AV2VERTICAL RIGHT
Not available with JXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
Not available with JXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
P
u
s
h
b
u
t
t
o
n
PC MOUNTING
PC MOUNTING
V61VERTICAL MOUNT, V-BRACKET, SNAP-IN
V2, V6, V7, V8VERTICAL MOUNT, V-BRACKET
V2, V7, V8VERTICAL MOUNT, V-BRACKET
V2, V7, V8VERTICAL MOUNT, V-BRACKET
8321SD3__GE
3PDT
8421SD3__GE
4PDT
Not available with JXX actuators and I seal.
Not available with JXX actuators and I seal.
Not available with JXX actuators and I seal.
V2.555 (14,10)
V7.630 (16,00)
V8.953 (24,21)
DIM ‘A’
OPTION
CODE
V2.555 (14,10)
V7.630 (16,00)
V8.953 (24,21)
DIM ‘A’
OPTION
CODE
Pushbutton
PC MOUNTING
PC MOUNTING
.630
(16,00)
PC MOUNTING V31VERTICAL MOUNT, V-BRACKET, SNAP-IN
V3, V4, V9VERTICAL MOUNT, V-BRACKET
V4, V9VERTICAL MOUNT, V-BRACKET
V31VERTICAL MOUNT, V-BRACKET, SNAP-IN
V3, V4, V9VERTICAL MOUNT, V-BRACKET
V3, V31.460 (11,68)
V4.630 (16,00)
V9 1.150 (29,21)
DIM ‘A’
OPTION
CODE
V3, V31.460 (11,68)
V4.630 (16,00)
V9 1.150 (29,21)
DIM ‘A’
OPTION
CODE
V4.630 (16,00)
V9 1.150 (29,21)
DIM ‘A’
OPTION
CODE Not available with J8X actuators and I seal.
Not available with J8X actuators and I seal.
Not available with JXX actuators and I seal.
8121SD3__GE
SPDT
8221SD3__GE
DPDT
8321SD3V4GE
3PDT
P
u
s
h
b
u
t
t
o
n
PC MOUNTING
.630
(16,00)
V4.630 (16,00)
V9 1.150 (29,21)
DIM ‘A’
OPTION
CODE
Not available with JXX actuators and I seal.
8421SD3V4GE
4PDT
V4, V9VERTICAL MOUNT, V-BRACKET
E EPOXY SEAL I EPOXY POTTED BASE
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1ALL CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2N.O. AND N.C. CONTACTS: Coin silver, with gold plate over nickel plate.
3COMMON CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4TERMINALS: Copper alloy, with matte-tin over nickel plate.
NOTE:Any models supplied with B, P, R or G contact material are RoHS compliant.
U811-U841 models with all options (except R, R2 terminations) when ordered with
mandatory G, R or L contact material.
B or P contact material must be ordered with 8X25 models.
G or R contact material must be ordered with 8X21, U8X1 models.
P or R contact material not available with Z, Z3 terminations.
K, L and M options represent Non RoHS tin lead product and are not recommended
for new designs. For additional information please contact Customer Service.
SP.410 (10,41)
DP.440 (11,18)
3P.505 (12,83)
4P.505 (12,83)
DIM ‘A’
NO.
POLES
Pushbutton
P u s h b u t t o n
Suggested LED for J82 & J84 options.
Dimensions for reference only.
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included.
Panel Inserts
Special colors, custom markings available, consult Customer Service Center.
PANEL INSERT
WITH HOLE FOR LED PART NO.
894901000894902000894903000894905000894906000894909000BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO.
476601000WHITE 476602000BLACK 476603000RED
476605000YELLOW 476606000GREEN 476609000GRAY
.047" (1,19) PANEL THK.PART NO.
432501000432502263432503000432505000432506000432509000.062" (1,57) PANEL THK.PART NO.
432601000432602263432603000432605000432606000432609000.090" (2,29) PANEL THK.PART NO.
432701000432702263432703000432705000432706000432709000.125" (3,18) PANEL THK.PART NO.
432801000WHITE 432802263BLACK 432803000RED
432805000YELLOW 432806000GREEN 432809000GRAY
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
Process Information:Soldering to LED leads must be completed within 5 seconds at 500oF (260oC) maximum.
Caution:Circuit elements must limit forward current of LED to 50mA max. continuous.* Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center.LEDs are not supplied with J82, J84 options. LED snaps into switch frame surrounding actuator and is wired externally.
Pushbutton