当前位置：文档库 › 船检业务英语

船检业务英语

船检业务用英语

1、船体

56 分段完工后结构完整性和焊缝检查

Inspection structure integrity and welding seam on completing No.56 block.

上层建筑完后结构完整性检查

Inspection structure integrity after completing the superstructure.

No.8 与 No9 分段合拢后大接头装配精确性和结构完整性检查

Checking the joint accuracy and structure integrity between No.8 and No.9 block after closed.

上层建筑合拢后结构完整性检查

Checking structure integrity of superstructure(deckhouse)after closed.

货舱口围板船上安装精度检查

Inspecting fitting accuracy of hatch coaming on berth.

货舱口围板焊接后焊缝检查

Inspecting welding seam of hatch coaming after welding.

No1 压载水舱（No.15 分段）气压试验（压头试验）检查

Inspection air pressure test(with water head) for No1. ballast water tank(No15 block).

上甲板冲水试验检查

Inspection hosing test for upper deck.

下水前测量船体主尺度、总长、两柱间长、型宽、型深、基线挠度

Measuring hull’s main dimensions: length overall(LOA.),length between perpendiculars(LPP.),breath molded(B. mld.),depth molded and deflection before launching.

划线后检查吃水标尺至平板龙骨之间的距离

Inspection distance between draught marks and keel plate after marking out.

吃水标志（载重线标志）安装后精确性检查

Inspecting fitting accuracy of draught mark(load line mark).

载重线标志划线后检查尺度

Inspection dimension of load line after marking out.

舵叶完工后检查

Checking rudder after completing(finished).

货舱舱口盖焊缝和尺度检查

Inspection welding seam and dimension of cargo hatch cover.

2、轮机内场

螺旋桨轴（中间轴）机加工尺寸检查

Inspection machining dimension of propeller shaft(intermediate shaft or counter shaft).

检查螺旋桨轴与螺旋桨锥度接触面

Check for surface contact area(metallic contact) between stern shaft and propeller hub tapers.

舵杆机加工尺寸检查

Inspection machining dimension of rudder stock.

上舵承组装后检查

Inspection rudder carrier after assembly.

舵销机加工尺寸检查

Inspection machining dimension of rudder pintle.

舵杆、舵叶、舵销连接后中心线检查

Inspecting alignment of stock, rudder blade and pintle.

锚投掷试验和拉力试验

Lowering test and tension test of anchor.

轴系连接螺栓和孔尺寸测量

Measuring dimension of coupling bolts and reamer hole.

3、轮机外场安装（钳工）

防蚀板布置正确性检查

Inspection arrangement correctness of aluminium Anodes.

船名牌（烟囱标志）安装正确性检查

Inspection installation correctness of ship’s name plate(funnel mark).

水密小舱口盖（水密门、窗）启闭灵活性检查

Flexibility and hosing test for small water tight hatch cover(water tight door and window).

货舱舱口盖密性试验（启闭试验、应急启闭试验）

Tightness test(opening and closing test,emergency opening and closing test)for cargo hatch cover. 弃锚装置检查

Inspecting anchor throwing away appliance.

轴、舵系镗孔前中心线定位检查

Inspecting centerline positioning for shaft system and rudder system before boring.

轴系镗孔后光学校中检查

Optical aligned check for shaft system after boring.

艉轴管滑油液压试验

Hydraulic test for L.O.pipe for stern tube.

艉轴管前、后轴承与衬套直径测量

Measuring diameter of fore and aft stern tube bearing and bushes.

艉轴管前、后衬套压入检查

Inspection push-up load for fore and aft stern tube bushes.

螺旋桨轴与轴承间隙测量

Measuring clearance between propeller shaft& bearing.

螺旋桨压入检查

Inspection wet fitting the propeller.

艉轴密性装置的安装与密性试验

Fitting and tightness testing of propeller shaft before launching(after sea trial).

艉轴管滑油系统的投油清洗

Flushing L.O.system of stern tube.

舵叶 0位检查

Inspecting zero(datum) position of rudder blade.

舵装置完整性与轻便性检查

Inspecting integrity and flexibility of rudder appliance.

舵止跳块的间隙测量

Measuring clearance of rudder jumping stopper.

操舵装置完整性检查

Inspecting integrity of steering gear.

舵轴承安装间隙测量

Measuring installation clearance of rudder bearing.

舵机管路系统的投油清洗

Flushing of piping system for steering gear.

舵机系泊试验

Mooring test of steering gear.

舵机航行中操舵试验

Manoeuving test of steering gear during sea trial.

舵机应急操舵试验

Emergency manoeuving test of steering gear.

锚机管路系统的投油清洗

Flushing of piping system for windlass.

锚机安装与校中检查

Installation and alignment inspection of windlass.

锚机系泊试验

Mooring test of windlass.

锚机航行中抛起锚试验

Anchoring and weighting test of windlass on sea trial.

绞缆机完整性检查

Inspection integrity of mooring winch.

绞缆机管路系统的投油清洗

Flushing of piping system for mooring winch.

绞缆机系泊试验

Mooring test of mooring winch.

舵机（锚机、绞缆机）液压系统安全装置调整

Adjusting safety device for hydraulic system of steering gear(windlass、mooring winch).

4 吨食物吊运转试验和吊重试验

Running test and hoisting test for4t provision crane.

救生艇收放试验

Lowering and hoisting test for life boat.

救生艇航行试验

Sea trial for life boat.

舷梯（引水员梯）压重试验

Loading test of accommodation ladder(pilot ladder).

舷梯（引水员梯）和绞车收放试验

Lowering and hoisting test of accommodation ladder(pilot ladder).

货舱舱口盖启闭试验

Opening and closing test for cargo hatch cover.

货舱舱口盖应急启闭试验

Emergency opening and closing test for cargo hatch cover.

水密小舱口盖（水密门、窗）启闭灵活性检查和冲水试验

Flexibility and hosing test for small water tight hatch cover(water tight door and window). 主机垫片检查

Checking liner of main engine(M.E.).

主机贯穿螺栓紧固度检查

Tightening inspection for through bolts of main engine(M.E.).

下水后主机曲轴和中间轴连接后校中

Aligning main engine’s crank shaft and intermediate shaft after launching.

下水后中间轴和螺旋桨连接后校中

Aligning intermediate shaft and propeller shaft after launching.

主机动车前（航行试验后）曲轴甩档测量

Measuring deflection of crank shaft of M.E.before starting up(after sea trial).

主机滑油（燃油）管路投油清洗

Flushing lubrication oil(fuel oil) system of M/E.

轴带发电机及齿轮箱安装检查

Alignment inspection installation of shaft generator and gear box.

主机报警和安全装置试验

Alarm testing and safety device testing of M/E.

主机系泊（航行）试验并检查其附属泵与管路

Mooring test(sea trial) of M.E.and inspection attached pumps and piping system.

轴带发电机运转试验及主机与轴带发电机之间的离合器的效用试验

Running test of shaft generator and clutching test between M.E.and shaft generator.

航行试验中轴带发电机与柴油发电机之间的换车试验

Change over test between shaft generator and diesel generator on sea trial.

主机航行试验后的拆检

Overhauling main engine after sea trial.

主柴油发电机组安装检查

Installation inspection of main diesel generator.

主柴油发电机动车前（系泊试验后）曲轴甩档测量

Measuring deflection of crank shaft of main diesel generator before running test(after sea trial).

主柴油发电机的报警和安全装置试验

Alarm and safety device testing of main diesel generator.

主柴油发电机运转试验

Running test of main diesel generator.

应急柴油发电机运转试验

Running test of emergency main diesel generator.

应急柴油发电机的安全装置试验

Safety device testing for emergency diesel generator.

主（辅）空气压缩机的充气试验、安全阀和自动装置的调整

Charging test and safety valve and automatic device adjusting for main compressor(auxiliary compressor).

应急空气压缩机的运转试验、安全阀和安全装置的调整

Running test and safety valve and safety device adjusting for emergency compressor.

主空气瓶（控制空气瓶、汽笛空气瓶）装船后气密试验和安全阀的调整

Air tightness test and safety valve adjusting for main air receiver (control air receiver, air horn receiver)on board.

辅锅炉（废气锅炉）装船后气密试验

Air tightness test for auxiliary boiler (economize boiler) on board.

辅锅炉安全阀检验及蓄压试验

Safety valve adjusting and accumulating test for auxiliary boiler.

辅锅炉自动控制装置试验

Automatic controller test for auxiliary boiler.

废气锅炉效用试验

Function test for economizer.

压载泵效用试验和自动控制装置试验

Function test and automatic controller test for ballast pump.

舱底水油水分离器（污水处理装置、制淡装置、焚烧炉）效用试验

Function test of bilge oily water separator (sewage treatment plant, fresh water generator, incinerator).

机舱行车吊重试验

Hoisting test of engine room crane.

机修间设备运转试验

Running test of machines in repair room.

敷板前驾驶室检查主干电缆安装

Inspection main cable installation for wheel house before paneling decoration.

总配电板（应急配电板）绝缘电阻测量和保护装置可靠性试验

Measuring insulation resistance and reliability test protection device for main switchboard(emergency switchboard).

主发电机（应急发电机）负荷及特性试验

Load and performance test for main generator (emergency generator).

主发电机（应急发电机）电压、频率自动调节试验

Automatic governing test of voltage and frequency for main generator (emergency generator).

主发电机并联运行试验

Parallel-running test for main generator.

柴油发电机电压特性试验

Diesel generator voltage characteristic test.

柴油发电机调速特性试验

Diesel generator governor sensitivity test.

突加负荷试验

Test for taking on a full load suddenly.

逆功率脱扣试验

Reverse power relay trip test.

过电流脱扣试验

Over-current relay test.

低压脱扣试验

Under voltage tripping test.

联锁试验

Interlocking reliability test.

二台主发电机负荷转移试验

Testing load charge-over between two main generator.

轴带发电机负荷试验和航行时效用试验

Load test for shaft generator and its function test on sea trial.

应急发电机自动供电试验

Automatic supply test of emergency generator.

舵角指示器校准

Calibrating tudder angle indicator.

舵角电动机遥控起动和报警试验

Remote starting and alarm test for steering gear motor.

自动舵效用试验

Function test automatic pilot.

锚机（舵机）电动机运转试验

Running test of motor for windless (steering gear).

辅机和泵的电动机程序起动和自动转换

Sequence starting and automatic exchange of motors for auxiliary machine and pump.

蓄电池和充电装置的充放电试验

Charge and discharge operation test for battery and charge equipment.

机舱风、油（舱底泵）应急切断装置操作试验

Operation test of emergency switching-off device for oil pump and ventilator (bilge pump) in engine room.

消防泵、应急消防泵遥控装置操作试验

Operation test of remote control device for fire pump and emergency fire pump.

雾笛效用试验

Function test of fog horn.

测深仪的换能器船台安装和水密性检查

Inspection installation and water tight transducer of echo sounder on berth.

测深仪效用试验

Function test of echo sounder.

计程仪水下部分船台安装和水密性检查

Inspection installation and water tight for log’s underwater parts on berth.

航行试验中计程仪效用试验及误差调整

Function test and adjust error for log on sea trial.

测向仪环状天线船台安装检查

Inspection installation for loop antenna of direction finder on berth.

航行试验中测向仪效用试验及自差曲线校正

Function test and calibration self-heterodyne curve for direction finder on sea trial.

组装报务台天线安装检查和绝缘测量

Inspection installation for antenna of radio console and measuring its insulation resistance.

发讯机调谐表制表

Scheduling tuning chart of transmitter.

航行试验中组装报务台效用试验

Function test of radio console on sea trial.

航行试验中电罗经固定误差校正和效用试验

Calibration constant error and function for gyro compass on sea trial.

航行试验（系泊试验）中雷达效用试验

Function test of radar on sea trial (mooring test).

传感器报警设定值模拟试验

Simulating alarm test for fire detector.

火警检测器自动报警试验

Automatic alarming test for fire detector.

下列项目按系泊试验大纲进行系泊试验

The items are tested according to mooring test program as following as:

轮机员呼叫装置试验

Function test of engineer calling device.

病室呼叫装置试验

Function test of calling device in hospital.

超短波对讲机

Function test of ultra-short wave radio telephone.

主机遥控系统性能试验

Function test of remote control system of main engine.

无人机舱作 4~6小时航行试验

UMS(unattended machinery space) sea trial continue 4~6hours.

电路绝缘电阻测量

Measuring installation resistance for circular.

气象传真机效用试验

Function test for weather facsimile receive.

救生（助）艇吊架结构和压重试验

Inspection the structure and loading test of the lifeboat(Rescue boat) davit. 冷藏氟利昂管系密性试验

Ref.Freon piping to be done air-tightness test.

冷藏氟利昂管系真空试验

Ref.Freon piping to be done vacuum test.

冷藏机组保护装置试验及打冷试验

Ref.Plant to be done protection divice test and cooling-down test.

机舱风管结构交验

E/R vent duct structure to be inspected.

房舱空调氟利昂管系密性试验

Accommodation air-condition freon piping to be done air-tightness test.

房舱空调氟利昂管系真空试验

Accommodation air-condition freon piping to be done vacuum test.

房舱风量调整试验

Accommodation to be done air-flow adjustment test.

房舱空调机组保护装置试验及冷/热效用试验

Accommodation A-C plant to be done protection device test.

集控室单位式空调效用试验

E/C RM.Package A-C to be done function test.

机舱空气干燥器效用试验及报警试验

E/R air drier to be done function test and alarm test.

救生（助）艇收放试验

Lifeboat(rescue boat) to be done lowering and hoisting test.

Superstructure water-tightness doors and windows to be done hosing test.

房舱风机效用试验

Cabin supply fan to be done function test.

上层建筑救生、消防设备交验

Superstructure life-saving and fire fighting equopment to be done inspection.

厨房、洗衣间设备交验

Galley and laundry equopment to be done function.

下甲板逃口――水密门冲水试验

Low deck escape-water-tightness doors to be hose test.

上层建筑风雨密门窗安装后检查

Inspection water-tightness doors and windows of superstructure after fitting.

上层建筑通风门门片安装后检查

Inspection air outlet grilles of superstructure after fitting.

通道门操作和密性试验

Lobby doors to be done operation test and tightness test.

冰箱效用试验

Refrigerator to be done function test.

救助艇航行试验

Rescue boat to be done sea trial test.

救助艇架结构完整性交验

Structure completeness of rescue boat davit to be inspected.

救助艇架（救生筏吊架）静负荷试验

Rescue boat davit(life raft davit) to be done static loading test.

救助艇架（救生筏吊架）动负荷试验

Rescue boat davit(life raft davit) to be done dynamic test.

艏部舱室（舵机房）风管结构交验

Vent duct structure of bow cabin(steering gear RM.) to be inspection.

菌形风头手动启闭试验

Mushroom outlet closing and opening by hand to be inspected.

7、内装（铜工）

上层建筑压缩空气管系密性试验

Superstructure compressed air piping to be done air-tightness test.

上层建筑控制空气管系密性试验

Superstructure compressed control air piping to be done air-tightness test.

上层建筑供水管系密性试验

Superstructure water supply piping to be done air-tightness test.

上层建筑消防管系（包括应急消防管系）密性试验

Superstructure fire fighting piping (including emergency fire fighting piping) to be done air- tightness test.

上层建筑烟雾报警管系密性试验

Superstructure smoke detection piping to be done air-tightness test.

厨房 CO2管系密性试验

Galley CO2 piping to be done air-tightness test.

Superstructure drainage air piping to be done air-tightness test.

房舱凝水、落水管系畅通试验

Cabin condense piping to be done free-flowing test.

房舱蒸汽管系密性试验

Cabin steam piping system to be done air-tightness test.

甲板冲洗管系密性试验

Deck flushing piping system to be done air-tightness test.

油漆间消防管系密性试验

Painting RM.Fire fighting pipe to be done air-tightness test.

驾驶室喷淋管系效用试验

W/H jetting pipe to be done function test.

8、内装（木工）

集控室浮动地板

Floating floor of E/C RM.

集控室绝缘

Insulation of E/C RM.

冷库地板绝缘

Insulation of Ref. RM.floor.

冷库围壁绝缘

Insulation of Ref. RM.wall.

冷库平顶绝缘

Insulation of Ref. RM.ceiling.

冷库隔墙及顶大梁处绝缘

Insulation of separate wall and beam in Ref. RM.

驾驶室浮动地板

Floating floor of W/H.

主甲板浮动地板

Floating floor of main deck.

驾驶室绝缘

Insulation of W/H.

A 甲板绝缘（包括 A 甲板 A60 绝缘）

Insulation of A-deck(including A60insulation).

B 甲板绝缘（包括 B 甲板 A60 绝缘）

Insulation of B-deck(including A60insulation).

C 甲板绝缘（包括 C 甲板 A60 绝缘）

Insulation of C-deck(including A60insulation).

D 甲板绝缘（包括 D 甲板 A60 绝缘）

Insulation of D-deck(including A60insulation).

主甲板绝缘

Insulation of main deck(including A60insulation).

应急发电机室绝缘（包括应急发电机室 A60 绝缘） Insulation of emergency generator room (including A60insulation).

CO2 室绝缘

Insulation of CO2 room.

机舱逃口绝缘（包括机舱逃口 A60 绝缘）

Insulation of escape in E/R.(including A60insulation).

F11#舱壁绝缘（包括 F11#舱壁 A60 绝缘）

Insulation of F11# bulkhead in E/R.(including A60insulation).

应急消防泵室绝缘（包括应急消防泵室 A60 绝缘）

Insulation of emergency fire fighting pump RM.(including A60insulation).

舵机房绝缘

Insulation of steering gear RM.

A 甲板流平层敷料

Something deck covering of A-deck.

B 甲板流平层敷料

Something deck covering of B-deck.

C 甲板流平层敷料

Something deck covering of C-deck.

D 甲板流平层敷料

Something deck covering of D-deck.

主甲板流平层敷料

Something deck covering of main deck.

驾驶甲板流平层敷料

Something deck covering of W/H deck.

……舱室－围壁绝缘

One wall insulation of……

全船储藏室完整性提交

Completeness of all locker to be inspection.

全船房舱完整性提交

Completeness of all cabin to be inspection.

船长室、轮机长室（电机员室）敷板前检查隔热安装

Inspection insulation installation for master room, Chief engineer room(electrical engineer room) before panel.

船长室（轮机长室）舱室完整性（木工和内部装饰）提交

Completeness delivery of accommodation (joiner work and interior decoration of accommodation) for master room(chief engineer room).

Mature，dynamic and honest．思想成熟、精明能干、为人诚实。

Excellent ability of systematical management．有极强的系统管理能力。

Ability to work independent1y，mature and resourcefu1．能够独立工作、思想成熟、应变能力强。

A person with ability plus flexibility should app1y.需要有能力及适应力强的人。

A stable personality and high sense of responsibility are desirable.个性稳重、具高度责任感。

Work well with a multi-cultural and diverse work force.能够在不同文化和工作人员的背景下出色地工作。

Bright，aggressive applicants.反应快、有进取心的应聘者。

Ambitious attitude essential．有雄心壮志。

Initiative，independent and good communication skill．积极主动、独立工作能力强，并有良好的交际技能。

Willing to work under pressure with leardership quality．愿意在压力下工作，并具领导素质。 Willing to assume responsibilities.应聘者须勇于挑重担。

Mature，self-motivated and strong interpersonal skills.思想成熟、上进心强，并具极丰富的人际关系技巧。

Energetic，fashion-minded person.精力旺盛、思想新潮。

With a pleasant mature attitude.开朗成熟。

Strong determination to succeed．有获得成功的坚定决心。

Strong leadership skills．有极强的领导艺术。

Ability to work well with others.能够同他人一道很好地工作。

Highly-motivated and reliable person with excellent health and pleasant personality.上进心强又可靠者，并且身体健康、性格开朗。

The ability to initiate and operate independently.有创业能力，并能独立地从业。

Strong leadership skill while possessing a great team spirit.有很高的领导艺术和很强的集体精神。

Be highly organized and effecient．工作很有条理，办事效率高。

Willing to learn and progress．肯学习进取。

Good presentation skills.有良好的表达能力。

Positive active mind essential．有积极、灵活的头脑。

Ability to deal with personnel at all levels effectively。善于同各种人员打交道。

Have positive work attitude and be willing and able to work diligently without supervision。有积极的工作态度，愿意和能够在没有监督的情况下勤奋地工作。

Young，bright，energetic with strong career-ambition.年轻、聪明、精力充沛，并有很强的事业心。

Good people management and communication skills.Team player.有良好的人员管理和交际能力。能在集体中发挥带头作用。

Able to work under high pressure and time limitation.能够在高压力下和时间限制下进行工作。

Be elegant and with nice personality.举止优雅、个人性格好。

With good managerial skills and organizational capabilities.有良好的管理艺术和组织能力。

The main qualities required are preparedness to work hard, ability to learn, ambition and good health.主要必备素质是吃苦耐劳精神好、学习能力优、事业心强和身体棒。

Having good and extensive social connections.具有良好而广泛的社会关系。

Being active, creative and innonative is a plus.思想活跃、有首创和革新精神尤佳。

With good analytical capability.有较强的分析能力。

Piping work: 铺管工程

Steam trace: 加热蒸汽管道

Cutting: 切割

socket weld 承插焊接

fillet weld 角焊,填角焊

branch connection 分支接续

fabrication tolerance.制造容差

local heat treatment 局部热处理

threaded pipe 螺纹管

seal welding.密封焊接

flange joint 凸缘接头

undercut 底切

feeder 馈电线

conduit outlet 电线引出口

seal fitting 密封接头, 密封配件

Screw thread lubricant 螺纹润滑剂

Seal: 绝缘层

weld reinforcement 焊缝补强

lock washer 锁紧[止动, 防松]垫圈

electrical panel.配电板,配电盘

nipple 螺纹接头

zinc plated.镀锌的

ring joint 环接, 围缘接合

bolt 螺栓

control: 控制器

National Electrical Code 全国电气规程

master schedule 主要图表, 综合图表, 设计任务书, 主要作业表 torque wrench 转矩扳手

job site 施工现场

flange connection.凸缘联接

Hard hat：安全帽

Goggles：护目镜

stockpile 贮存

packing list 装箱单

crate: 柳条箱

purchased material list 原材料进货单

back-feed 反馈

wire coil 线盘，线卷，

NPT thread. 美国标准锥管螺纹

cable gland 电缆衬垫

terminal block 线弧, 接头排接线盒, 接线板, 线夹

power drill 机械钻

connector. 接线器

insulated sleeve 绝缘套管

wire connector 接线器

wire terminal 电线接头

control wiring 控制线路

motor lead 电动机引出线

power wiring 电力布线

tender document．提供证件

orifice plate.挡板

nut 螺母

flange gasket 法兰垫片

dimensional inspection 尺寸检验

burn through 烧蚀

piping system.管道系统

reinforcement of weld 加强焊缝

fabrication.制造

dye penetrant examination 染料渗透试验法

magnetic particle examination 磁粉检验

girth weld 环形焊缝

cement lined piping 水泥衬里

weld joint 焊缝, 焊接接头

spool drawing 管路图, 管路详图

spot test 抽查, 当场测试

butt weld 对接焊缝

Random Radiography 随机射线照相检查

radiographic examination 射线照相检查

assembly.装配

erection 架设

examination 试验

cable tray.电缆盘

rigid steel conduit 钢制电线管

power control 功率控制

arc welding 电弧焊

control cable 控制电缆操纵索

normal bend 法向[法线]弯管

cable glands: 电缆衬垫

exfoliation 剥落

power receptacle 电力插座

grounding conductor 接地导体

lighting fixture 照明器材

junction box 分线箱

race way 电缆管道

terminal box 接线盒

distribution board 配电盘, 配电屏

receptacle 插座

tumble switch.翻转开关,拨动式开关

cathodic protection system 阴极保护系统

Circuit breaker 断路开关

amplifier panel 放大器盘

control console 控制台

electrical material 电气材料

convenience receptacle.电源插座

cable gland 电缆衬垫

TIG： Tungsten-arc Inert-Gas welding 钨极电弧惰性气体保护焊 filler rod 焊条

tensile strength 抗张强度

shield gas 保护气体

shield jig 保护夹具

high frequency generator.高频发电机

welding rod 焊条

filler metal 焊料, 焊丝

shop fabrication 车间制造

field installation 现场安装

welding bead 焊道

both sides welding.双面焊接

residual stress 残余应力

electrode 电焊条

condensation 冷凝

longitudinal.纵向的

horizontal line 水平线

circumferential joint 周圈接缝 nondestructive examination.非破坏性检验, qualification: 合格性

construction work 施工工程

welded joint 焊接缝焊接节点

gas cutting.气割

arc cutting 电弧切割

grind off 磨掉

metallic luster 金属光泽

Screwed Piping Joints 螺丝状的管接头 gouging .刨削槽

Bending: 挠曲

witness test 订货人在场的试验 Welding: 焊接

Threading: 车缧纹

Leveling：校平

color identification 彩色识别 Alignment：对准,定位调整

check against 检查, 核对

Fixing：固定

Console：控制台

cubicle 室,箱

audit 审计

material certificate.材料合格证

vertical panel 竖直面板

power distribution panel 配电盘

gauge board仪表板

beveling 磨斜棱,磨斜边

local panel 现场配电盘

grouting 灌浆

fabrication 加工,制造

instrument rack 计测器支架

tank gauge 液面计

flushing 冲洗，填缝

analyzer 分析器

piping 管道敷设

tubing 敷设管道

cable fitting电缆配件

elbow.弯管接头

main pipe 主管道

bend.弯管弯头

solvent 溶剂

postweld heat treatment 焊后热处理 jig.夹具

arc gouging 电弧刨削

chipping 修琢

machining 机械加工

bridges.管式桥

clamp.夹钳

tack welding 点焊

butt welding 对接焊

grinder. 磨床

commencement.开始

gusset plate 角撑板, 加固板 process pipe 工艺管道

land 纹间表面

tee 三通管丁字钢 T 形梁 opening 开口

reinforcing pad.补强垫,增强衬板

flux 焊剂

wet developer 湿显像剂

blowhole 气泡,气孔

inclusion 杂质

imperfection 缺陷

limitation 限度

valve 阀,闸门

structural attachment 结构附件 tapered allowance 削尖余量

tack welding 平头焊接

sputter 喷溅

scale 废料

lateral translation 侧向平移

weld joint 焊缝, 焊接接头

plug.塞

fusion 熔融

base material 基底材料

lead foil 铅箔

intensifying screen 增光屏, 光增强屏 pressure test.压力试验

film density.影片密度

line number 行数

leak test 漏泄试验

plate thickness 筛板厚度

restoration 修理

field fabricated 工地制造的,现场装配的 junction box.接线盒

flow sheet 流程图

vent 放气孔, 通风孔

drain 排水管

instrument air 仪表气源

blind 挡板

pipe arrangement 管配置

civil engineer.土木工程师

bus duct 母线槽

substation 分站

flow instrument 流量计

power distribution panel 配电盘

level instrument 位面计, 水平仪

pressure instrument 压力仪表/压力计

level switch (信号)电平开关,

gage glass 液位玻璃管

pilot tube 指示灯

line check 小检修

recalibration.复校,重新校准

blinding plate 盲板

expansion joint 伸缩接头

hydrostatic pressure test 静水压试验 pneumatic pressure 气压

scaffolding 脚手架

check valve 止回阀

liquid penetrantion examination 液体渗透探伤 test pump 试验泵

witnessed inspections 现场检测

hanger 吊架

control valve 控制阀,

fabrication drawing 制造图纸,制作图 schedule number 表示管壁厚度系列的号码 hydrostatic test.流体静力学试验,水压试验 design pressure 设计压力

disposition notice 处罚通知书

pipe stanchion 管支柱

bellow type 波纹管式

expansion joint 伸缩接头

vibration stopper：减震器

subcontractor 转包商

WPS Works Process Specification 典型工艺规程 piping.管道系统

flange.凸缘,

sleeve 套筒

ferritic.铁素体的

identification mark 识别标志

stencil.模绘片版,镂花模板

stamping .冲压

silicone paint 硅树脂油漆

weld bead 焊缝

automatic temperature recorder 温度自动记录器 penetrameter 透度计

film viewer 底片观察用光源

civil works 土建工程，建筑工程

lump sum price 混合价格 ,统包价格

scrap material 废料

caulking metal 填隙合金[金属](材料) application drawing 操作图, 应用图

cable routing 电缆路由选择

channel bases 沟渠基底

vertical panel 竖直面板

local panel 现场配电盘

power distribution panel 配电盘

gauge board样板, 模板规准尺

anchor bolt 锚定螺栓

expansion bolt 伸缩栓, 扩开螺栓

field instrument.携带式仪表

instrument rack 计测器支架,计测器框架

tank gauge 油箱液位计

guide wire 尺度[定距]索,准绳

name plate 名牌, 商标

lead pipe 铅管

take-off valve 输出阀

sub-header 分联箱

模具图中常见英文词语

模具图中常见英文词语 ADAPTER 管接头 ADHESIVE GLUE 粘结剂 AIR CYLINDER 气缸 AIR PIPING SET 空气管路装置 AIR VENT TUBE 空气排气管 AIR VENT TUBE （COPPER）空气排气管（铜管）AIR VENT TUBE （NYLON）空气排气管（尼龙管） BACK UP KEY止退键 BACKUP 止退 5°BACK5°负角 BEAD 拉延筋 BELL CRANK LIFTER SET 曲柄顶升机构BLANCER PLATE 平衡块 BLANK DIE 落料模BLANKHOLDER STOPPER BOLT 压边圈限位螺钉BLANCER BLOCK 平衡块 BOSS HOOK 铸造吊柄 BOTTOM BLOCK 压靠块 BOTTOM DIE 凹模镶套 BOTTOM MARKE 到底标记 BOTTOM PLATE 到底块、镦靠块BOLSTER SIZE （压机）工作台尺寸B/H （BLANK HOLDER ）压边圈 BOL T 螺栓 BOL T TYPE HOOK 螺栓型吊钩BUSING 套管 C/H CAM BOTTOM GUIDE PLATE 斜楔底部导向板CAM BOTTOM SLIDE PLATE 斜楔底部滑板 CAM DIE 斜楔模

CAM PAD KEEPER 斜楔压料器保位装置CAM POSITIVE RETURN FOLLER 斜楔刚性回程随动器CAM RETURN PLATE 斜楔回程板 CAM RETURN UNIT 斜楔返回装置 CAM SLIDE 斜楔滑板 CAM SPRING UNIT 斜楔弹簧组合件 CAM STOPPER 斜楔限止器 CAM STROKE PLATE 斜楔行程楔块CASTING DIMENSIONS 铸造尺寸 CHECKING FIXTURE 检具 CAST IN NUT 铸入式螺母 CAST IN HOOK 铸入式挂钩 CAST IN LIFTING BUSH 铸入式起重衬套 CAST IN PIPE 铸入式导管 COIL SPRING 卷形弹簧 COIL SPRING GUIDE 弹簧导销 COLLAR 杆环（轴环、垫圈等）CONTROL PANEL 控制板 COTTER PIN 开尾销 COUPLING NUT 联接螺母 COUPLING PLATE 联接板 COUPLING SLEEVE 联接套 COVER 防护罩 CUT SECTIONAL 分段切割(废料刀分布) DIE 模具 DATUM LINE 基准线 DIFFERENCE ELBOW 差异式管接头（不等径）DIFFERENCE SOCKET 差异式管接座（不等径）DISTANCE BLOCK 定距块（等高块）DOUBLE ACTION DRAW 双动拉延 DOWEL PIN 销 DETAIL 放大

船舶常用英语(一)讲解

一、船舶类型常用英语 ship, vessel 船，船舶 boat, craft 艇 sampan 舢板, 小船manpowered boat 人力船 sailor; sailing boat 帆船 motor sailor 机帆船 power-driven ship 机动船 paddle steamer, paddle wheel vessel 明轮船 screw ship; propeller vessel 螺旋桨船airscrew ship; aerial propeller vessel 空气螺旋桨船hovercraft; aircushion craft 气垫船hydrofoil 水翼船 hydrojet propelled boat, water jet boat 喷水船steamship; steamer 蒸汽机船 motor ship 内燃机船 diesel ship 柴油机船electrically-propelled ship 电力推进船 steam turbine ship 汽轮机船 gas turbine ship 燃气轮机船nuclear-power ship 核动力船 deck ship 甲板船 flush deck ship 平甲板船 raised quarter-deck ship 尾升高甲板船 well-deck ship 半舱船 single side ship 单舷长大舱口船three-island ship 三岛式船 double shell ship 双壳船 riveted ship 铆接船 welded ship 焊接船transversely framed ship 横骨架式船longitudinally framed ship 纵骨架式船combined framed ship 混合骨架式船 sea-going vessel 海船 ocean-going vessel 远洋船 coaster 沿海船 channel ship 海峡船 inland waterway vessel 内河船 civil ship; merchant ship 民用船；商船transport ship 运输船pleasure yacht 游艇passenger ship 客船 coasting passenger and cargo ship沿海客货船passenger and auto-car carrier 旅客及汽车运输船tourist ship; passenger carrier 旅游船 cargo ship; freighter 货船 cargo liner 定期货船tramp ship 不定期货船container ship 集装箱船full-container ship 全集装箱船semi-container ship 半集装箱船multi-purpose container ship 多用途集装箱船general cargo ship/vessel/carrier 杂货船 bulk (cargo) carrier 散货船 ore carrier 矿砂船 grain carrier 运粮船 coal carrier; coaler 运煤船lumber(timber) carrier 运木船 cattle carrier 运牲畜船multi-purpose ship 多用途船 liquid cargo ship 液体货货船chemical tank 化学品液货船 liquid chemical tanker 液体化学品船 liquefied gas carrier 液化气体船 liquefied petroleum gas tanker (LPG) 液化石油气运输船 liquefied natural gas tanker (LNG) 液化天然气运输船tanker; oil tanker 油轮 super tanker 超级油轮 VLCC (very large crude carrier) (吨位在20万至30 万吨之间的) 巨型油轮 ULCC (ultra-large crude carrier) (吨位在30万至50万吨之间的) 超巨型油船 refrigerated ship; cold storage ship 冷藏船roll-on/roll-off ship (RO/RO ship) 滚装船 ferry 渡船passenger ferry 旅客渡船 freight ferry 货物渡船 fishing vessel(boat) 渔轮 trawler 拖网渔轮 barge carrier; lighter aboard ship(LASH)载驳船barge; lighter 驳船 deck barge 甲板驳 well-deck barge 半舱驳 double shell barge 双壳驳 single side barge 单舷长大舱口驳 oil barge 油驳container barge 集装箱驳船 RO/RO barge 滚装驳船 liquefied gas barge 液化气体驳 hopper barge 开底泥驳 split hopper barge 对开泥驳pusher; pushboat 顶推船；推船 working ship 工程船 tug; tugboat; towboat 拖船

世界船公司排名简介

13大宗2班顾翊彬 1322330412 MAERSK 马士基 :马士基集团成立于1904年，总部位于丹麦哥本哈根，在全球135个国家设有办事机构，拥有约89,000名员工，在集装箱运输、物流、码头运营、石油和天然气开采与生产，以及与航运和零售行业相关其它活动中，为客户提供了一流的服务。集团旗下的马士基航运是全球最大的集装箱承运输公司，服务网络遍及全球。2014年马士基集团位列世界500强第172名。2012年，马士基码头公司与宁波港集团有限公司合资43亿元，投资、经营宁波梅山保税港区梅龙码头3号-5号泊位；马士基航运在青岛港集装箱吞吐首破百万标箱。重庆市海运有限责任公司CHONGQING MARINE SHIPPING CO., LTD. 重庆集装箱珠海北洋轮船有限公司ZHUHAI BEIYANG SHIPPING CO., LTD. 珠海集装箱暹逻航运国际有限公司SIAM PAETRA INTERNATIONAL CO., LTD. 泰国集装箱日本邮船株式会社NIPPON YUSEN KABUSHIKI KAISHA 日本集装箱、滚装船奥林汽船株式会社ORIENT FERRY, LTD. 日本客货丹东国际航运有限公司DANDONG INTERNATIONAL FERRY CO., LTD. 丹东客货韩国大仁轮渡有限公司KOREA DA-IN FERRY CO., LTD. 韩国客货黄海轮渡株式会社YELLOW SEA FERRY CO., LTD. 韩国客货津川国际客货秦皇岛秦仁海运有限公司QIN-IN FERRY CO., LTD. 秦皇岛客货荣成大龙海运有限公司RONGCHENG GREAT DRAGON SHIPPING CO., LTD. 荣成客货荣成华东海运有限公司HUADONG FERRY CO., LTD. 威海客货上海国际轮渡有限公司SHANGHAI INTERNATIONAL FERRY CO., LTD. 上海客货上海仁川国际轮渡有限司SHANGHAI INCHON INTERNATIONAL FERRY CO., LTD. 上海客货上海游轮公司SHANGHAI CRUISE CO., LTD. 韩国客货水晶航运有限公司CRYSTAL FERRY CO., LTD. 韩国客货天津津神客货轮船有限公司TIANJIN JINSHEN FERRY CO., LTD. 天津客货威海威东航运有限公司WEIHAI WEIDONG FERRY CO., LTD. 威海客货烟台中韩轮渡有限公司YANTAI ZHONGHAN FERRY CO., LTD. 烟台客货中日国际轮渡有限公司CHINA-JAPAN INTERNATIONAL FERRY CO., LTD. 上海毅发船务有限公司JUMBO RICH SHIPPING LIMITED 香港客运丽星邮轮（香港）有限公司STAR CRUISES (HK) LIMITED 香港旅游船太平洋（海南）邮轮有限公司PACIFIC CRUISES (HAINAN) LTD. 香港旅游船太阳神豪华邮轮有限公司APOLLO LUXURY CRUISES CO., LTD 英属维尔京群岛旅游船天运船务公司SKY-HIGH FORTUNE MARITIME INC. 利比里亚旅游船邮轮客运（香港）有限公司CRUISE FERRIES (HK) LIMITED 香港旅游船中国海洋豪华邮轮有限公司CHINA OCEAN DELUXE CRUISES LIMITED 香港旅游船

船舶常用英语

General arrangement 总布置 Interior arrangement 舱室布置 Engine room arrangement 机舱布置 Compass deck 罗经甲板 Navigation deck, bridge deck 驾驶甲板 Boat deck 艇甲板 Promenade deck 游步甲板 Accommodation deck 起居甲板 Helicopter deck 直升机甲板 Upper deck 上甲板 Winch platform 起货机平台 Passage , passage way 通道 Wheel house 驾驶室 Chart room 海图室 Radio room 报务室 Radar room 雷达室 Engine room 机舱 Centralized control room for machineries 机舱集控室Reactor room 反应堆舱 Boiler room 锅炉舱 Pump room 泵舱 Chain locker 锚链舱 Steering engine room, steering gear room 舵机舱Fan room 通风机室 Air conditioning unit room 空调机室 Refrigerator room 冷冻机室 Fire-smothering unit room 灭火装置室Emergency generator room 应急发电机室Commutator room 变流机室 Battery room 蓄电池室 Gyro-compass room 陀螺罗经室 Mast room 桅室 Sonar transducer space 声纳舱 Log room 计程仪舱 CO2 room CO 2室 Paint room 油漆间 Lamp room 灯具间 Windlass room 起锚机室 Anchor winch, anchor windlass 起锚机 Mooring winch 拖缆机，系泊绞车

船体检查英语词汇

一、船头 bit 系缆桩bollard 系缆桩 bow 船首bow fender 艏护垫 bow flare 艏部外飘bow thruster艏侧推器 bow anchor 艏锚bow frame 舟包部肋骨bow chock艏导缆口bow stopper制链器 break water 挡浪板bulbous bow球鼻艏 bulb stem 球式艏柱cable stopper制链器 chain locker 锚链舱chain pipe锚链管 chain stopper止链器chock 导缆器 clamp plate夹板垫木cleat羊角系绳铁栓防滑条capstan绞盘capstan绞盘筒 collision bulkhead 防撞舱壁forecastle首楼 forecastle deck 首楼甲板fore peak tank首尖舱foundation 底座ground tackle 锚泊索具gypsy绞筒（锚机绞车上的）hawse pipe锚链筒 hawse hole锚链孔hawser大缆 hawser clamp锚链挚hawse buckler/flap锚链孔盖mooring post 系缆柱mooring hole导缆孔astern post尾柱warping chocks滚轮导缆钳winch-head 绞车卷筒windlass起锚机 wire clip钢缆夹wire reel 卷缆车钢丝滚筒

flush deck 平甲板gunwale圆弧过渡舷边adapting连接管管接头air hole空气管 air pipe通风管air funnel货舱通风筒 air and sounding pipe amidships船中部appendages船体附属体（包括舵机和螺旋桨等） base line基线Batten板条压条 batten cleat舱口契耳batten down封舱 batten seat板条坐架压条架batten wedge封舱契 batten ceiling（货舱内）护舱条护板batten bar舱围压条beam bracket/knee 梁肘板bevel斜角斜面 bevel angle斜角坡口角度bevel board斜角板 bevel edge斜边bevel face斜面 bevel frame斜边肋骨bilge舟比部 bilge bracket舟比肘板bilge knee舟比肘板 bilge keel(chock piece)舟比龙骨 bilge line 污水管道bilge pipe 污水管 bilge pump污水泵bilge well/sump污水井 bilge alarm system污水警报系统bilge tank污水舱 bilge discharging pipe 污水排放管boom吊杆 bilge inlet 污水收集口bilge keelson舟比龙骨bilge plug 污水塞bilge sounding pipe污水测深管bottom frame 底部肋骨bottom longitudinal底部纵桁

国内各大船厂介绍

国内各大船厂介绍在中国的船舶工业中占有十分重要的地位，有目前国内规模最大、建造产品最齐全、最具有国际竞争力的现代化船舶总装企业，就是以前的大连造船厂，1990年原造船厂分为大连造船新厂和大连造船厂，我们习惯上称作“新厂”和“老厂”，两个厂子2005年12月9日合为一家，称作“大连船舶重工集团有限公司”，上属单位是中船重工。现在接手的多是油船、老厂接手的多是军船，以造军品为主，另外也接不少民船，因为海军的舰船有相当一大部分出自老厂，所以又被誉为“海军舰艇的摇篮”。2004年大连新厂入选了英国《劳氏》船级社的世界大型船厂，排行第七位。现有三十万吨级大坞两座，新厂的九百吨龙门吊被称作亚洲第一吊。现在合并之后把老厂附近的渔轮公司、黑嘴子港买了下来，把邮政码头租了下来，把老厂称为“一工场”，新厂称为“二工场”，这就是说还有“三工场”，“四工场”，他们的目标是建立一座现在化的船舶总装厂。2006年低，根据最新的统计资料，大连船舶重工已经成为了全国最大、世界第六大的造船企业。中远集团的修船厂在大连湾，也就是“大连中远船务工程集团有限公司”，是目前中国最大的修船厂，还有我国最大的三十万吨级浮船坞，2003年中远总公司以曾被《劳氏亚洲海运》杂志评为亚洲四个“最佳修船厂”之一的南通远洋船务公司为核心，整合了大连、广州等地的中远修船资源，在南通成功组建被誉为中国修船业“航母”的中远船务工程集团有限公司，2007年8月6日，大连中远造船工业有限公司在旅顺开发区羊头洼正式挂牌成立，主要工程为建设一座包括两个30万吨级船坞在内的国际一流水准现代化造船厂。大连辽南船厂（海军四八一零（海军4810）工厂，即旅顺大坞）是李鸿章建立北洋水师的时候建立的，现已成为旅顺海军基地最大的军工生产单位，修建的船舶包括了各种军船，从驱逐舰到护卫艇再到海警的巡逻艇，还有一些海军特种船，另外也接手少量民船包括远洋运输船、渔船和特种船等。造游艇很出名的大连松辽船厂（即解放军七八一四（陆军7814）工厂），隶属于沈阳军区工厂管理局，是一个陆军船艇的修造基地，为全军陆军船舰修造能力最强的厂家，算是中型企业，建造得船舶包括成品油轮、登陆艇、高速双体船、全封闭救生艇等

船舶常用英语(一)汇总

cargo liner 定期货船 tramp ship 不定期货船 container ship 集装箱船full-container ship 全集装箱船semi-container ship 半集装箱船multi-purpose container ship 多用途集装箱船 general cargo ship/vessel/carrier 杂货船 bulk (cargo) carrier 散货船 ore carrier 矿砂船 grain carrier 运粮船 coal carrier; coaler 运煤船lumber(timber) carrier 运木船 cattle carrier 运牲畜船 multi-purpose ship 多用途船 liquid cargo ship 液体货货船 chemical tank 化学品液货船 liquid chemical tanker 液体化学品船liquefied gas carrier 液化气体船 liquefied petroleum gas tanker (LPG) 液化石油气运输船 liquefied natural gas tanker (LNG) 液化天然气运输船 tanker; oil tanker 油轮 super tanker 超级油轮

船检英语

目录1，名词部分（一），船舶 1，船舶与海上设施的种类 2，数据与资料 3，舱室处所 4，高级船员与船员 5，船级（二），船体（三），轮机（四），电气（五），消防（六），救生设备（七），焊接二，动词部分（一），船舶处于或遭受的状态和情况（二），缺陷或损坏的状态和原因（三），修理方法（四），检查或试验三，短语句子部分（一），短语（二），句子四，报告部分

一，名词部分（一），船舶 1，船舶与海上设施的种类（type of ship and offshore unite）货船cargo ship 杂货船general cargo ship 散货船bulk carrier 矿砂船ore carrier 运煤船coal carrier 集装箱船container ship 滚装货船ro/ro ship 冷藏船refrigerated ship 运畜船cattle carrier 运木船timber carrier 近海供应船offshore supply ship 散装矿砂船bulk ore carrier 混装船combination carrier 载驳母船barge carrier 汽车运输船car carrier 2,液货船liquid cargo carrier 油船oil tanker 化学品液货船chemical tanker 液化气体船liquefied gas carrier 油矿两用船oil/ore carrier 油散两用船oil/bulk carrier 油散矿三用船oil/bulk/ore carrier 3,客船passenger ship 客船passenger ship 豪华旅游客船cruise ship 旅游船tourist ship 高速客船high speed passenger ship 双体客船passenger catamaran 客货船passenger cargo ship 客箱船passenger container ship 客滚船ro/ro passenger ship

船舶常用英语(一)汇总

阅读使人充实，会谈使人敏捷，写作使人精确。一、船舶类型常用英语 ship, vessel 船，船舶 boat, craft 艇 sampan 舢板, 小船manpowered boat 人力船 sailor; sailing boat 帆船 motor sailor 机帆船 power-driven ship 机动船 paddle steamer, paddle wheel vessel 明轮船 screw ship; propeller vessel 螺旋桨船airscrew ship; aerial propeller vessel 空气螺旋桨船hovercraft; aircushion craft 气垫船hydrofoil 水翼船 hydrojet propelled boat, water jet boat 喷水船steamship; steamer 蒸汽机船 motor ship 内燃机船 diesel ship 柴油机船electrically-propelled ship 电力推进船 steam turbine ship 汽轮机船 gas turbine ship 燃气轮机船nuclear-power ship 核动力船 deck ship 甲板船 flush deck ship 平甲板船 raised quarter-deck ship 尾升高甲板船 well-deck ship 半舱船 single side ship 单舷长大舱口船three-island ship 三岛式船 double shell ship 双壳船 riveted ship 铆接船 welded ship 焊接船transversely framed ship 横骨架式船longitudinally framed ship 纵骨架式船combined framed ship 混合骨架式船 sea-going vessel 海船 ocean-going vessel 远洋船 coaster 沿海船 channel ship 海峡船 inland waterway vessel 内河船 civil ship; merchant ship 民用船；商船transport ship 运输船pleasure yacht 游艇passenger ship 客船 coasting passenger and cargo ship沿海客货船passenger and auto-car carrier 旅客及汽车运输船tourist ship; passenger carrier 旅游船cargo ship; freighter 货船 cargo liner 定期货船 tramp ship 不定期货船container ship 集装箱船full-container ship 全集装箱船semi-container ship 半集装箱船multi-purpose container ship 多用途集装箱船general cargo ship/vessel/carrier 杂货船 bulk (cargo) carrier 散货船 ore carrier 矿砂船 grain carrier 运粮船 coal carrier; coaler 运煤船lumber(timber) carrier 运木船 cattle carrier 运牲畜船multi-purpose ship 多用途船 liquid cargo ship 液体货货船chemical tank 化学品液货船 liquid chemical tanker 液体化学品船 liquefied gas carrier 液化气体船 liquefied petroleum gas tanker (LPG) 液化石油气运输船 liquefied natural gas tanker (LNG) 液化天然气运输船tanker; oil tanker 油轮 super tanker 超级油轮 VLCC (very large crude carrier) (吨位在20万至30 万吨之间的) 巨型油轮 ULCC (ultra-large crude carrier) (吨位在30万至50万吨之间的) 超巨型油船 refrigerated ship; cold storage ship 冷藏船roll-on/roll-off ship (RO/RO ship) 滚装船 ferry 渡船passenger ferry 旅客渡船 freight ferry 货物渡船 fishing vessel(boat) 渔轮 trawler 拖网渔轮 barge carrier; lighter aboard ship(LASH)载驳船barge; lighter 驳船 deck barge 甲板驳 well-deck barge 半舱驳 double shell barge 双壳驳 single side barge 单舷长大舱口驳 oil barge 油驳container barge 集装箱驳船 RO/RO barge 滚装驳船 liquefied gas barge 液化气体驳 hopper barge 开底泥驳

船检业务用英语

船检业务用英语 1、船体 56分段完工后结构完整性和焊缝检查 Inspection structure integrity and welding seam on completing No.56 block. 上层建筑完后结构完整性检查 Inspection structure integrity after completing the superstructure. No.8 与No9分段合拢后大接头装配精确性和结构完整性检查Checking the joint accuracy and structure integrity between No.8 and No.9 block after closed. 上层建筑合拢后结构完整性检查 Checking structure integrity of superstructure(deckhouse)after closed. 货舱口围板船上安装精度检查 Inspecting fitting accuracy of hatch coaming on berth. 货舱口围板焊接后焊缝检查 Inspecting welding seam of hatch coaming after welding. No1压载水舱（No.15分段）气压试验（压头试验）检查Inspection air pressure test(with water head) for No1. ballast water tank(No15 block). 上甲板冲水试验检查 Inspection hosing test for upper deck.

船体检查英语词汇

船头一、bit 系缆桩bollard 系缆桩bow 船首bow fender 艏护垫 bow flare 艏部外飘bow thruster艏侧推器 bow anchor 艏锚bow frame 舟包部肋骨bow chock艏导缆口bow stopper制链器bulbous bow球鼻艏break water 挡浪板 cable stopper制链器bulb stem 球式艏柱 chain pipe锚链管chain locker 锚链舱 chain stopper止链器chock 导缆器系绳铁栓防滑条cleat羊角clamp plate夹板垫木绞盘capstan capstan绞盘筒首楼collision bulkhead 防撞舱壁forecastle fore peak tank首尖舱首楼甲板forecastle deck ground tackle 锚泊索具foundation 底座锚链筒gypsy绞筒（锚机绞车上的）hawse pipe hawser 大缆锚链孔hawse hole 锚链孔盖hawser clamp锚链挚hawse buckler/flap 导缆孔mooring hole 系缆柱mooring post 尾柱astern post warping chocks滚轮导缆钳windlass起锚机绞车卷筒winch-head

wire clip钢缆夹wire reel 钢丝滚筒卷缆车 1 flush deck 平甲板gunwale圆弧过渡舷边adapting连接管管接头air hole空气管 air pipe通风管air funnel货舱通风筒 amidships船中部air and sounding pipe appendages 船体附属体（包括舵机和螺旋桨等） base line基线Batten板条压条batten cleat舱口契耳batten down封舱 batten seat板条坐架压条架batten wedge封舱契 batten ceiling（货舱内）护舱条护板batten bar舱围压条 beam bracket/knee 梁肘板bevel斜角斜面 bevel angle斜角坡口角度bevel board斜角板 bevel edge斜边bevel face斜面 bevel frame斜边肋骨bilge舟比部 bilge bracket舟比肘板bilge knee舟比肘板 bilge keel(chock piece)舟比龙骨 bilge line 污水管道bilge pipe 污水管 bilge well/sump污水井bilge pump污水泵 bilge tank污水舱bilge alarm system污水警报系统 bilge discharging pipe boom吊杆污水排放管

[VIP专享]各船公司介绍大全

1、MAERSK：这家公司祖上北欧海盗出身，后来走正途作了航运，总部在哥本哈根，是 6层小楼，有电梯，但是没什么人坐电梯，因为大老板每天爬楼梯到自己六楼办公室，所以没人敢坐，都爬楼。Mearsk以自大、死板、守信誉着称，其上缴税收占到丹麦政府收入的40%，在丹麦巨牛。其外派人员以素质低着称，例如中国区总经理苏恩深原来在丹麦就是开机卡的司机，据说他填履历表学历一栏从来都是空着。但是Mearsk对新员工要求很高，分为employee和trainee，前者是一般雇员，后者要到丹麦总部经过几个月的集中培训，（巨残酷，教材有辞海那么厚，3本）然后派到世界各地任职，最后不管男女，上船锻炼半年，再委以重任。关于马士基的评论，句句属实！！强帖！！不过苏老头（MSK内部称光头佬）只是GCA 大中华区的总经理，补充一下. （自家话：我听说MSK的人工工资都超高的，业务出差，都一定得住5星以上，不知是不是真的？） 2、MSC：欧洲黑社会的洗钱机构，在瑞士注册。据说MSC到船厂造船是这样的：派几个人，用很大很大的皮箱提好多现金，和船厂谈好合同以后，把皮箱打开，从里面数出一定比例现金，然后把其余的交给船厂，说我的佣金我已经拿走，这是订金，签合同吧。MSC 的船名以*女的名字居多，如洛丽塔、法米娅之类。MSC从不和其他公司融舱，船都大的要命，运价低得要命，服务差得要命。也很少租箱子，全部是自有箱。（自家话：现在局面也改了，黑社会也开始从良了。MSC现在的运价也不算便宜了。） 3、长荣海运EMC：张荣发40年心血的结晶，管理十分混乱，咎其原因是因为张荣发老婆太多，老婆多了儿子自然多，张大老板有6个儿子，2个女儿，这么多儿女是要安排工作的，可是除了二儿子没有一个着调的，儿女之间互相倾轧，十分惨烈。长荣是股份公司，张荣发控股，但是还有他人股份，当年航运市场最低迷的时候，张荣发拿自己的钱注册了立荣，以防长荣忽然倒下自己没有退身之所。但后来市场越来越好，长荣越来越好，于是就让长荣高价收购了立荣，张荣发自己大赚一笔。后来为了经营两岸直航，继续收购意邮，以欧洲公司的名义作直航。去年又成立HASU MARINE（绝对内幕），因为2006年长荣运力将增长40%，要分散风险。 4、再说中远。扣死扣（cosco）是中国的第二海军，享受国家最最最优惠的航运政策。我们接触比较多的是中远集运，这两年航运市场市场贼好，但是中集没赚道什么钱，主要原因是中集运价体制太乱，特价申请满天飞，差不多每张申请都有背景，主管人员又不得不批。作为老牌国企，中远在管理体制上存在诸多问题，例如船员收入，十分的底。有传说现任集团总裁魏家福当时从新加坡调任天远总经理的时候，他在新加坡的行李用中远的集装箱船捎带到天津，船员听说这批东西是上面某位重要领导的，于是毫不犹豫的把几大箱子宝贝全扔到了海里，箱子里面有很多股东和文物。据说打这以后中远对船员更加苛刻。前一段时间中远成立了泛亚航运，将近洋航线全部纳入泛亚旗下，中远集运主体专着做好全球中远洋航线。中远还是当代中国航运界的黄埔军校，很多航运界想当当的人物都有从中远服务的经历，这种现象也说明另一个问题：中远就像一块肥肉，有本事的人肯上一大口就走，跑到别处慢慢吃，中远造就了多少百万富翁，不得知晓。 5、铁行渣华：P&O和Nedlloyd原是两家公司，P&O就是大名鼎鼎的“半岛及东方”，学过海商法的人都知道“喜马拉雅条款”（此条款就印在每一份提单的背面），最早的判例就是出自该公司。97年的时候（好像，大概是这时间），两家公司把集装箱业务拿出来合

工装夹具英文词汇

一、检具(Inspection tool) 1.百分表带表座Dial Indicator with Mag. Base 2.游标卡尺Vernier Calipers 3.千分尺Micrometer 4.数字高度尺Digital height gage 5.杠杆百分表Lever type Dial indicator 6.丝规Thread gage 7.塞规Plug gage 8.深度尺Depth gage 9.门线直径规 Diameter gage for valve line 10.球室角度量规Angle gage for shpere sapce 11.座标综合检具：Coodination comprehensive gage 12.合金标棒：Alloy master gage 二、工装夹具（fixture and jig：钻：Drill 铰：Ream 铣：Mill 攻：Tap 1.粗铣：Rough mill 2.钻定位孔：drill location hole 3.铰回油孔Ream oil drainage hole 4.粗镗凸轮孔Rough bore camshaft hole 5.精车球室Finish-turn shphere face 6.倒角Chamfer 7.攻进/排气Tap inlet/exhaust threaded hole 8.精铣：Finish mill 三、刀具（cutting tool)： 1.机夹刀片 Cutting blade 2.长钻花 Long drill 3.铰刀：Reamer 4.倒角钻：Chamfer drill 5.粗/精镗刀：Rough/Finish-boring tool 6.锪刀: Counter-sink tool 7.直钻：Streight drill 8.金刚石铣刀片Diamond milling cutter tip

船舶图纸常用英语词汇

船舶图纸常用英语词汇1 1. abrasive blasting (磨料)喷砂法, 喷砂 2. access n.通路, 访问, 入门；vt.存取, 接近 3. acknowledge vt. 承认, 答谢, 报偿 4. alignment n.排列成行;排列成的行列;结盟；合作（亦作： alinement）； n.队列, 结盟 5. annex n. 附件 vt. 并吞, 附加 6. anti slip n.防滑 7. application n.请求, 申请, 申请表, 应用, 运用, 施用, 敷用;应用,应用程序,应用软件 8. argument n.争论,辩论,论据,论点,～(for,against),意见 9. assembly装配，安装，组装组装件，总成机组，集合,装配,集会,集结,汇编【机】装配;装配车间; 部件, 组(合)件; 成套件; 联合装置 10. attachment strap 搭接带, 搭接板 11. available adj.可用到的, 可利用的, 有用的, 有空的, 接受探访的 12. back strap 背垫条, 衬垫, 垫里, 垫座 13. bar 杆,棒,棒材,钢筋,型材,型钢;炉条,(锚链的)横档,闩;【电气】汇流排;柜台,酒吧,快餐柜台;阻拦,禁止aitch bar工字(形)钢,宽缘工字材anchor bar 撬锚棒angle bar 角材,角钢back(ing) bar 【焊接】垫板,背垫短角材batten(ing) 舱口压条bearer bar 托梁,支承梁bearing (steel) bar 支承钢筋,受力(钢)筋; 承重杆,承压条bolt bar 插销,驻栓;螺柱杆bounding bar 缘周角材brass bar 黄铜棒bulb bar 球缘材,球缘钢bulb flat bar 球扁钢bulb-angle bar 球缘角材,球缘角钢bulb-tee bar 丁字形球缘材,丁字形球缘钢bulb bus bar 【电气】汇流条,汇流排,母线channel bar 槽材,槽钢copper bar 紫铜棒crow bar 起货钩;橇杆,撬棒deep (frame) bar 强肋骨equal-angle bar 等边角材,等边角钢face bar 面材,缘边角材fender bar 护舷材(小艇的),护舷木filler bar 焊条flat bar 扁材forged stem bar 锻造首柱frame bar 肋骨角材,肋骨钢guard bar 栏杆,扶手,扶栏H bar 宽缘工字钢,工字钢half-round bar 半圆钢,半圆材I bar (窄缘)工字钢iron bar 扁材,铁条,钢条L bar 不等边角钢,不等边角材mo(u)d bar 型材,型棒pinch bar 撬杆,撬棍,绞盘棒plain bar 普通角材,平角钢plain bulb bar 球缘扁材,球扁钢rack bar 齿条,齿杆reinforcing bar 钢筋,加强筋round bar 圆材,圆钢sectional bar 型材,型钢square bar 方材,方钢stop bar 止动条T bar “T”形材,“T”形钢tooth(ed) bar 齿条,齿杆,齿闩unequal angle bar不等边角钢,不等边角材unequal flange[unequal leg] bar 不等边角钢,不等边角材

船舶英语汇总

船舶英语目录一.职位及工种 (Titles and type of work) (1) 二、柴油机类 (Words about diesel engine) (3) 三、船舶机械类 (Words about marine machinery) ·· 11 四、阀门(Words about valve) (14) 五、泵类(Words about pump) (16) 六、甲板机械类（Deck machinery） (18) 七、工具类(Word about tools) (20) 八、常用物料(Material in common use) 26 九、常用紧固件 (Part of fixation in common use) (28) 十、常用油类(Oil in common use) (28) 十一、常用量词 (Quantifier in common use) (29) 十二、国家名称(Name of country) 。 30 十三、常用缩语 (abbreviation in common use) (31) 十四、船用动态常用单词(marine tends word) 32 十五、船舶机电设备操作词汇 (manipulate of marine equipment) ·33 十六、故障常用单词 (words about malfunction) (35) 十七、保养检修常用词汇 (Words about maintain and examination) 38 十八、常用数字(Numeral in common use) 40 十九、时间、季节与方向 (Time、Season and Direction) (42) 二十常用词组（Phrases in common use）·45 二十一、常用动词和例句 (Verb in common use and example) (48) 二十二、问候和常用表达语 (Greeting and common expression) (67) 二十三、主机提交过程用语 (Delivery expressions for main engine) 68 二十四、空压机和空气系统用语 (Air compressor and Air system) (75) 二十五、锅炉提交用语 (Delivery expressions for boiler) (77) 二十六、锚绞车提交过程用语(Delivery expressions for anchor windlass) 79 二十七、舵机提交过程用语 (Steering gear delivering) (87) 二十八、付机提交过程用语（Delivery expression for A/E） (91) 二十九、救生艇提交过程用语 (Delivery expressions for lifeboat) ··92 三十、其他提交项目 (Delivery expressions for other items) (95) 三十一、甲板机械系泊试验 (Mooring test for deck machinery) (96) 三十二、机舱设备系泊试验 (Mooring test for the equipment in E/R) (98) 三十三、谈论故障常用语（Expressions for trouble） (100) 三十四、谈论检修常用语 (Expressions for overhaul) (101) 三十五、谈论试验和检验 (Talking about test & check) (103) 三十六、谈论技术要求 (Talking about technology required) (105) 一．职位及工种(Titles and type of work) 1．船长 Captain 2．大副 Chief officer 3．二副 Second officer 4．三副 Third officer 5．四副 Fourth officer 6．水手长 Boatswain 7．水手 Sailor & Seaman 8．木匠 Carpenter 9．轮机长 Chief engineer 10．大管轮 Second engineer 11．二管轮 Third engineer 12．三管轮 Fourth engineer 13．机匠长 Chief motorman 15．机匠 Fitter 16．加油工 Oil man 17．大电 Chief electrician 18．电工 Electrician 19．车间主任 Workshop director 20．工长 Section chief 21．班长 Fore man 22．钳工 Fitter 23．主管工程师 Engineer in charge 24．机务&船东 Superintendent &Super &Owner 25．助理工程师 Assistant engineer 26．验船师（机）Register 27．验船师（船）Surveyor 28．油漆工 Painter 29．焊工 Welder 30．大橱 Chief cook 31．物料员 Store keeper 32．加油工 Oiler 33．机工 Mechanic 34．甲板员 Deck man 35．电线工 Wireman 36．外包工 Laborer 37．铸工 Molder 38．管子工 Pipe fitter 39．起重工 Crane operator 二、柴油机类(Words about diesel engine) 1．主机 Main engine 2．二冲程柴油机 Two-stroke diesel engine 3．四冲程柴油机 Fore-stroke diesel engine 4．高速柴油机 High speed diesel engine 5．中速柴油机 Middle speed diesel engine 6．低速柴油机 Low speed diesel engine 7．气缸盖(缸头) Cylinder head 8．安全阀 Safety valve 9．释放阀 Relief valve 10．示功阀 Indicator valve 11．示功考克 Indicator cock 12．空气起动阀 Air starting valve 13．起动空气分配器 Air starting distributor 14．油头(燃油喷射器) Fuel injector 15．排气阀 Exhaust valve 16．气缸套 Cylinder liner 17．冷却水套 Cooling water jacket 18．气缸注油器 Cylinder lubricator 19．活塞 Piston 20．活塞头 Piston crown 21．活塞裙 Piston skirt 22．活塞销 Piston gudgeon pin 24．活塞杆 Piston rod 25．活塞环 Piston ring 26．活塞环槽 Piston ring groove 27．压缩环 (气环) Compression ring 28．刮油环 (油环) Oil scraper ring 29．减磨令 Wear ring (copper ring) 30．伸缩管(水拉管) Telescopic pipe 31．活塞冷却空间 Piston cooling space 32．填料箱(函) Stuffing box 33．填料箱密封环Sealing ring for Stuffing box 34．填料箱压缩环 Pressure ring for Stuffing box 35．填料箱刮油环Scraper ring for Stuffing box 36．扫气箱 Scavenging receiver 37．扫气口 Scavenging port 38．排气口 Exhaust port 39．十字头 Cross head 40．十字头销 Crosshead pin 41．十字头轴承 Crosshead bearing 42．十字头滑块 Crosshead slipper 43．滑块 Guide shoe 44．十字头导板 45．连杆 46．连杆大端轴承 47．连杆小端轴承 Small end bearing 48．曲柄轴承 Crank bearing 49．曲柄销 Crank pin 50．曲轴 Crank shaft 51．曲轴颈 Crank journal 52．曲柄臂 Crank web 53．拐档差 Crank deflection 54．主轴承 Main bearing 55．主轴颈 Main journal 56．轴承瓦 Bearing bush 57．上轴瓦 Upper bearing bush 58．上轴瓦 Upper half 59．下轴瓦 Lower bearing bush 60．下轴瓦 Lower half 61．推力轴承 Thrust bearing 62．推力块 Thrust pad 63．推力盘 Thrust disc 64．推力轴 Thrust shaft 65．底座 Bed plate 66．机架 Frame 67．曲柄箱 Crank case 68．曲柄箱导门 Crank case door 69．曲柄箱防爆门 Explosion-proof Crank case. 70．定时齿轮 Timing gear 71．飞轮 Flying wheel 72．凸轮 Cam 73．凸轮轴 Cam shaft 74．喷油凸轮 Fuel injection cam 75．链条 Chain 76．链条轮 Chain wheel 77．链条箱 Chain box 78．推杆 Push rod 79．摇臂 Rocker arm 80．排气阀 Exhaust valve 81．吸气阀 Suction valve 82．排气总管 Exhaust manifold 83．进气总管 Air inlet manifold 84．高压燃油管 High pressure fuel pipe 85．活塞冷却水管 Piston cooling water pipe 86．法兰 Flange 87．贯穿螺栓 Tie bolt (tie rod) 88．端盖 Side cover 89．滑油泵 Lubricating oil pump 90．燃油泵 Fuel oil pump 91．滑油泵齿轮 Gear for lubricating oil pump 92．燃油泵齿轮 Gear for fuel oil pump 93．叶轮 Impeller 94．柱塞 Plunger 95．导杆 Guide rod 96．导套 Sleeve 97．滚动轴承 Ball bearing 98．滑动轴承 Sliding bearing 99．推力滚动轴承Thrust ball bearing 100．推力面 Thrust surface (thrust side) 101．盘车机 Turning gear 102．增压器 Turbocharger 103．涡轮机(透平) Turbine 104．涡轮 Turbine wheel 105．涡轮叶片 Turbine blade 106．喷嘴 Nozzle 107．废气叶轮 Exhaust impeller 108．废气叶轮片 Exhaust blade 109．废气端 Exhaust side 110．透平端 Turbine side 111．转子轴 Rotor shaft 112．油泵 L.O.pump 113．换向装置 Reversing device 114．换向伺服期 Reversing servomotor 115．压气机(鼓风机) Blower 116．膨胀接 Expansion joint 117．调速器 governor 118．飞重 Flying weight 119．补偿阀 Compensate valve 120．针阀 Needle valve 121．开口销 Cotter pin 122．轴封 Shaft seal