DC/DC Converter
TES 2 Series 2 Watt
Input Specifications
Input current no load /full load 5 Vin models 80mA / 665 mA typ.
12 Vin models 35mA / 280 mA typ.
24 Vin models 17mA / 140 mA typ.
48 Vin models10mA / 70 mA typ.
Surge voltage (1 sec. max.) 5 Vin models 7.5VDC max.
12 Vin models 15VDC max.
24 Vin models30VDC max.
48 Vin models55VDC max.
Reverse voltage protection500 mA max.
Input Filter Pi-Filter
Output Specifications
Voltage set accuracy± 3 %
Regulation– Input variation Vin min. to Vin max.± 0.3 % max.
– Load variation 10 – 100 %
– single output models± 0.5 % max.
– dual output models balanced load± 3 % max.
Ripple and noise (20 MHz Bandwidth)50 mVpk-pk max.
Temperature coefficient± 0.02 % / °C
Output current limitation>120 % of Iout max., constant current Short circuit protection indefinite (automatic recovery) Capacitive load– single output models470 μF max.
– dual output models220 μF max.
General Specifications
Temperature ranges– Operating– 40 °C ... + 60 °C (no derating)
– Case temperature+ 95 °C max.
– Storage– 40 °C ... + 125 °C
Derating 2.9% / °C above 60 °C
Humidity (non condensing)95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 E)>800’000h @ + 25 °C
Isolation voltage Input/Output1’000VDC
Isolation capacity Input/Output100 pF typ.
Isolation resistance Input/Output (500 VDC)> 1‘000 M Ohm
Switching frequency80 KHz typ. (depending on load)
Rev. 10/01