VERTEX70_Bruker

Bruker Optics

The VERTEX 70 series FT-IR spectrometers offer unmatched performance and versatil-ity for demanding analytical and research applications.

RockSolid* interferometer

2-channel 24-bit dynamic range ADC Remotely selectable 5 exit and 2 input beam ports

Easy beamsplitter change without interferometer alignment

Near IR, visible and far IR/THz spectral range extensions

Vacuum optics for VERTEX 70v Automated internal dual sources

and dual detectors option

Automatic optical components recognition VERTEX 70: Unmatched FT-IR Performance and Versatility The VERTEX 70 is a fully digital FT-IR spectrometer series for demanding R&D applications. Its innovative design results in the highest flexibility and highest performance. The data acquisition is based on two channel delta-sigma ADCs with 24-bit dynamic range, which are integrated into the detector preamplifier electronics. This advanced DigiTect* technology prevents external signal disturbance and guarantees the highest signal-to-noise ratio. Wide Spectral Range

The VERTEX 70 series can be optionally equipped with optical compo-nents to cover the spectral range from 15cm-1 (10cm-1 for VERTEX 70v) in the far IR/THz, through the mid and near IR up to the visible/UV spectral range at 28,000cm-1. With its pre-aligned optical components and permanently aligned RockSolid* interferometer, range change is easy and maintenance free.

BRAIN: Bruker Artificial Intelligence Network

A network of intelligent functions such as recognition of sampling accessories and optical components, automatic set up and check of measurement parameters makes FT-IR spectroscopy easy, fast and reliable. In addition, the permanent online check of spectrometer com-ponents keeps fault diagnostics and maintenance simple. A full suite of software tools ensures this functionality.

VERTEX 70 & 70v FT-IR Spectrometer

https://www.wendangku.net/doc/7a11968234.html,

Bruker Optics Inc.Billerica, MA · USA

Phone +1 (978) 439-9899Fax +1 (978) 663-9177info@https://www.wendangku.net/doc/7a11968234.html,

Bruker Optik GmbH Ettlingen · Germany

Phone +49 (7243) 504-600Fax +49 (7243) 504-698info@brukeroptics.de

Bruker Optik Asia Pacific Ltd.Hong Kong

Phone +852 2796-6100Fax +852 2796-6109

asiapacific@https://www.wendangku.net/doc/7a11968234.html,

Bruker Optics is continually improving its products and reserves the right to change specifications without notice. ? 2008 Bruker Optics BOPT-080122-1

Automatic Component Recognition

The sources, detectors and beam splitters on the VERTEX 70 - 70v are electronically coded to be recognized by the instrument and ap-propriate experimental parameters are auto-matically loaded. In addition, if two conflicting components are installed at the same time, the VERTEX 70 series will recognize this and inform about the mismatch.

Vacuum Optics

With the evacuable optics bench of the VERTEX 70v vacuum FT-IR spectrometer, PEAK sensitivity in the mid-, near and far IR/THz regions are obtained without the fear of masking very weak spectral features caused by water vapor or CO 2 absorptions. Outstand-ing results, e.g. in the area of nano-science research down to sub-monolayers, can be ob-tained with the new VERTEX 70v vacuum FT-IR spectrometer. The oil-free dry vacuum pump which is included in the instrument delivery pro-vides a vacuum level of less than 0.2hPa (mbar) within minutes.

Plug & Play: Easy Set Up

All over the world, no matter where you are, plug in the power cord and the Ethernet connection, and the VERTEX 70 is ready for operation. The Ethernet connection to the VERTEX 70 also offers the possibility to control the spectrometer via your network or the World Wide Web.

Spectral Resolution

than 0.4cm

-1 Versatility

the HYPERION User-changeable components in the different compartments are easily accessible.RockSolid* interferometer used in the VERTEX 70 - 70v FT-IR spectrometer.

* covered by one or more of the following patents:US 5,309,217; US 7034944; DE 4212143; DE 10159721

Bruker Optics

is ISO 9001 certified.

Laser class 2