MURHF860CT

MURHF860CT

Preferred Device SWITCHMODE t

Power Rectifier

These state‐of‐the‐art SWITCHMODE power rectifiers are designed for use in switching power supplies, inverters and as free wheeling diodes.

Features

??Ultrafast 35 Nanosecond Recovery Times

??150°C Operating Junction Temperature

??Electrically Isolated. No Isolation Hardware Required

??Epoxy Meets UL 94 V-0 @ 0.125 in

??High Temperature Glass Passivated Junction

??High V oltage Capability to 600 V

??Low Leakage Specified @ 150°C Case Temperature

??Pb-Free Package is Available*

Mechanical Characteristics:

??Case: Epoxy, Molded

??Weight: 1.9 Grams (Approximately)

??Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable

??Lead Temperature for Soldering Purposes: 260°C Max for 10 Seconds MAXIMUM RATINGS (Per Leg)

Rating Symbol Value Unit

Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage V RRM

V RWM

V R

600V

Average Rectified Forward Current (Rated V R, T C = 120°C) Total Device I F(AV) 4.0

8.0

A

Peak Repetitive Forward Current

(Rated V R, Square Wave,

20 kHz, T C = 120°C)

I FM16A

Non-Repetitive Peak Surge Current

(Surge Applied at Rated Load Conditions

Halfwave, Single Phase, 60 Hz)

I FSM100A

Operating Junction and Storage

Temperature Range

T J, T stg-65 to +150°C

THERMAL CHARACTERISTICS (Per Leg)

Rating Symbol Value Unit

Max Thermal Resistance, Junction-to-Case R q JC 4.1°C/W Stresses exceeding Maximum Ratings may damage the device. Maximum

Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.

*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.Preferred devices are recommended choices for future use and best overall value.

https://www.wendangku.net/doc/7f13176042.html,

ELECTRICAL CHARACTERISTICS (Per Leg)

Characteristic Symbol Value Unit

Maximum Instantaneous Forward Voltage (Note 1)

(i F = 4.0 A, T C = 150°C)

(i F = 4.0 A, T C = 25°C)v F

2.5

2.8

V

Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, T C = 150°C)

(Rated DC Voltage, T C = 25°C)i R

500

10

m A

Maximum Reverse Recovery Time

(I F = 1.0 A, di/dt = 50 A/m s)

t rr35ns 1.Pulse Test: Pulse Width = 300 m s, Duty Cycle ≤ 2.0%

PACKAGE DIMENSIONS

TO-220 FULLPAK CASE 221D-03

ISSUE J

STYLE 3:

PIN 1.ANODE

2.CATHODE

3.ANODE

DIM A MIN MAX MIN MAX MILLIMETERS

0.6170.63515.6716.12INCHES B 0.3920.4199.9610.63C 0.1770.193 4.50 4.90D 0.0240.0390.60 1.00F 0.1160.129 2.95 3.28G 0.100 BSC 2.54 BSC H 0.1180.135 3.00 3.43J 0.0180.0250.450.63K 0.5030.54112.7813.73L 0.0480.058 1.23 1.47N 0.200 BSC 5.08 BSC Q 0.1220.138 3.10 3.50R 0.0990.117 2.51 2.96S 0.0920.113 2.34 2.87U

0.2390.271

6.06 6.88

M

B

M

0.25 (0.010)Y

SEATING PLANE

NOTES:

1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 198

2.

2.CONTROLLING DIMENSION: INCH

3.221D-01 THRU 221D-02 OBSOLETE, NEW S TANDARD 221D-03.

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.