MPC5777MFS
Fact Sheet
Qorivva MPC5777M MCU
Overview
The 32-bit Qorivva MPC5777M MCU is built on Power Architecture ? technology and is our first powertrain device with quad processing cores operating greater than 200 MHz. The
MPC5777M addresses the requirements of direct injection, advanced diesel, transmission, hybrid electric and full electric powertrain applications to meet the most extreme regulatory and environmental emission qualifications.
The MPC5777M offers unprecedented performance at 300 MHz per core (50 percent more than MPC5746M) and scalability from 2.5 MB flash up to 8 MB of memory. This device also provides customers task flexibility and parallel processing by leveraging the I/O processor to offload computational cores. The MPC5777M also includes next-generation security protection such as a hardware security module and tamper detection module, deterring software hacking and aftermarket tuning which affects unauthorized warranty returns.
The MPC5777M is part of our SafeAssure program, designed to help system manufacturers more easily achieve compliance with functional safety standards. The SafeAssure program is built around a multicore safety architecture to assist customers in ISO26262 functional safety certification for ASIL-D safety integrity. In order to minimize additional software and
MPC5777M Block Diagram
MPC5777M Block Diagram Target Applications
? Engine control
? Gasoline direct injection ? Common rail diesel injection or clean diesel ? Hybrid electric and full electric vehicle motor control ? Cylinder or multi-valve deactivation ? Transmission control
Freescale, the Freescale logo and Qorivva are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. SafeAssure and the SafeAssure logo are trademarks of Freescale Semiconductor, Inc. The Power Architecture and https://www.wendangku.net/doc/7616707274.html, word marks and the Power and https://www.wendangku.net/doc/7616707274.html, logos and related marks are trademarks and service marks licensed by https://www.wendangku.net/doc/7616707274.html,. All other product or service names are the property of their respective owners. ? 2012 Freescale Semiconductor, Inc.Document Number: MPC5777MFS REV 0
For more information, visit https://www.wendangku.net/doc/7616707274.html,/MPC5777M
module-level features to reach this target, on-chip redundancy is offered for the critical components of the MCU. These include multiple CPU computational cores with delayed lockstep, I/O processor core, DMA controller, interrupt controller, dual crossbar bus system, memory protection unit, fault collection and control unit (FCCU), flash memory and RAM controllers, peripheral bus bridge, system and watchdog timers and end-to-end error correction coding (ECC).
Software and Development Tools
A comprehensive suite of hardware and software development tools is available to help simplify and speed system design. Development support is available from world-class tool vendors, providing compilers, debuggers and simulation development environments.
Compilers
? Green Hills Software ? Wind River (Diab compiler)? HighTec EDV-Systeme GmbH
Debuggers
? P&E Micro ? Lauterbach
? Green Hills Software ? PLS Development Tools
Runtime Software
? Flash and EEPROM drivers ? Software core self test ? AUTOSAR MCAL 4.0
Operating Systems and Calibration Tools
? AUTOSAR OS 4.0 provided by third-party vendors ? ETAS
SafeAssure Program
Functional Safety. Simplified.
Our SafeAssure functional safety program is designed to help system manufacturers more easily achieve system compliance with International Standards Organization (ISO) 26262 and 61508 functional safety
standards. The program highlights Freescale solutions—hardware and software—that are optimally designed to support functional safety implementations and come with a rich set of enablement collateral. For more information, visit https://www.wendangku.net/doc/7616707274.html,/SafeAssure.
Qorivva MPC5777M Features
Features
Benefits
? T wo independent e200z7 computational cores operating up to 300 MHz ? Single e200z4 I/O core operating up to 200 MHz
On-chip DSP and floating point unit ? S ignificant performance allows users to enable virtual sensors and eliminate many external ICs.? T he capability to reduce code footprint by up to 30
percent for improved code density and reduced memory requirements.
8 MB flash memory with error correction coding Generous memory supports autocode generation and modeling tools that speed time to market.? U p to 596 KB of total SRAM with ECC (404 KB system) with 192 KB of tightly coupled SRAM
64 KB of Standby RAM ? L arge RAM size to meet next-generation requirements.? Tightly coupled RAM increases data transfer speed.Up to 128-channel enhanced direct memory access (eDMA) control
eDMA channels to manage on-chip memory needs.Functional safety support
? Single 300 MHz e200z7 core with delayed lockstep ? End-to-end ECC
? Memory and logic built-in self test ? Fault Collection and Control Unit
Helps simplify compliance for automotive safety systems targeting ISO 26262 and ASIL-D.
248-channel general timer module (GTM104)
New complex timer is optimized for engine control systems. Using these complex timers results in precise fuel and air delivery and improved gas mileage.
Up to 84-channels SAR type analog-to-digital converters (ADC) including 10 x ∑? ADC converters Allows independent and simultaneous conversions of analog signals and helps to filter unwanted noise to optimize
combustion.
Dual-channel FlexRay? controller Capable of up to 10 Mb/s bandwidth.Ethernet controller (FEC)Capable of up to 100 Mb/s bandwidth.? 4x M-CAN ? 1x TT-CAN High-speed CAN communication with time triggered support. M-CAN supports flexible data rate.
? 6x LINFlex
? 8x dSPI and 2 x I 2C
? 5x PSI-5 and 15 x SENT ? L FAST Zipwire ? (inter-processor communication interface)
Supports LIN/J2602, microsecond bus, sensor interface communication and high-speed parallel communication.Hardware security module and tamper detection On-chip security for code protection. Supports SHE and AES
protocols.
JTAG debug with Nexus Aurora trace support Standard JTAG interface or high-speed calibration interface,
with support for IEEE-ISTO 5001 Nexus including the Nexus Aurora high speed trace (Emulation device only) and on-chip Nexus trace memory.
Hardware
Hardware
Part Number
Package Supported
EVB motherboard X-MPC5746MMB N/A (to be used with adapter)EVB daughter card X-MPC5777M-416DS 416 PBGA socket adapter EVB daughter card X-MPC5777M-512DS 512 PBGA socket adapter EVB daughter card
X-MPC5746M-292DS
292 BGA socket adapter
Package Options
Part Number
Temperature Range
Package
PPC5777MQK0MVU8–40 °C to +125 °C 416 PBGA PPC5777MQK0MMZ8–40 °C to +125 °C 292 MAPBGA PPC5777MQK0MVA8
–40 °C to +125 °C
512 PBGA