Features
?High brightness ?Small size
?Industrial standard footprint ?Diffused optics
?Top emitting or right angle emitting
?Compatible with IR soldering ?Compatible for use with light piping
?Available in 8 mm tape on 7" diameter reel
?Reel sealed in zip locked moisture barrier bags
Applications
?LCD backlighting
?Push button backlighting ?Front panel indicator ?Symbol indicator ?Microdisplays
?Small message panel signage
Description
These small chip-type LEDs utilize high efficient and high brightness InGaN material to deliver competitively priced high
performance blue and green. These 520 nm green and 470 nm blue are unique hues which provide color differentiation to a product.These ChipLEDs come in either top emitting packages (HSMx-C130,C150, C170, C177, C190, C191,C197), in side emitting packages (HSMx-C110, C120) or in a reverse mount package (C265). The side
emitting package is especially suitable for LCD backlighting application. The top emitting
packages, with their wide viewing angle, are suitable for direct
backlighting application or being used with light pipes. In order to facilitate pick and place operation,these ChipLEDs are shipped in tape and reel with 4000 units per reel for HSMx-C120, C130, C170,C177, C190, C191 and C197
packages, and 3000 units per reel for HSMx-C110, C150 and C265packages. All packages are
compatible with IR soldering and binned by both color and intensity.
Agilent HSMx-C1xx
High Performance Chip LED
Data Sheet
HSMQ-C110/120/150/170/177/190/191/197/265,HSMR-C110/120/130/150/170/177/190/191/197/265
CAUTION: HSMQ-C1xx and HSMR-C1xx are Class 1 ESD sensitive per MIL-STD-1686. Please observe appropriate precautions during handling and processing. Refer to Agilent Technologies Application Note AN-1142 for additional details.
Package Dimensions
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
0.4 ± 0.15
0.4 ± 0.15
TERMINAL
HSMx-C170
HSMx-C190
0.3 ± 0.15
1.0
TERMINAL
HSMx-C191
0.3 ± 0.15
1.0
TERMINAL
POLARITY
TERMINAL
HSMx-C110
Package Dimensions, continued
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
HSMx-C150
0.50 ± 0.20 0.50 ± 0.20 TERMINAL
POLARITY
TERMINAL
0.40 ± 0.15
HSMx-C177
POLARITY
0.30 ± 0.15
TERMINAL
HSMx-C197
POLARITY
TERMINAL
HSMx-C120
Absolute Maximum Ratings at T A = 25?C HSMQ-Cxxx Parameter
HSMR-Cxxx Units DC Forward Current [1]20mA Power Dissipation
78mW Reverse Voltage (I R = 100 μA)5V LED Junction Temperature 95?C Operating Temperature Range –30 to +85?C Storage Temperature Range –40 to +85
?C
Device Selection Guide Package Dimension (mm) [1], [2]InGaN Green InGaN Blue Package Description 3.2(L) x 1.0(W) x 1.5(H)HSMQ-C110HSMR-C110Untinted, Non-diffused 1.6(L) x 0.6(W) x 1.0(H)HSMQ-C120HSMR-C120Untinted, Non-diffused 1.6(L) x 0.8(W) x 0.35(H)–
HSMR-C130Untinted, Diffused 3.2(L) x 1.6(W) x 1.1(H)HSMQ-C150HSMR-C150Untinted, Diffused 2.0(L) x 1.25(W) x 0.8(H)HSMQ-C170HSMR-C170Untinted, Diffused 2.0(L) x 1.25(W) x 0.4(H)HSMQ-C177HSMR-C177Untinted, Diffused 1.6(L) x 0.8(W) x 0.8(H)HSMQ-C190HSMR-C190Untinted, Diffused 1.6(L) x 0.8(W) x 0.6(H)HSMQ-C191HSMR-C191Untinted, Diffused 1.6(L) x 0.8(W) x 0.4(H)HSMQ-C197HSMR-C197Untinted, Diffused 3.4(L) x 1.25(W) x 1.1(H)
HSMQ-C265
HSMR-C265
Untinted, Non-diffused
Notes: 1. Dimensions in mm. 2. Tolerance ± 0.1 mm unless otherwise noted.
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
Package Dimensions, continued
0.3 ± 0.15
POLARITY
TERMINAL
HSMx-C130
0.50 ± 0.15 POLARITY
0.50 ± 0.15 TERMINAL
HSMx-C265
Optical Characteristics at T A = 25?C
Luminous Color,Viewing Luminous Intensity Peak
Dominant Angle Efficacy I V (mcd)Wavelength Wavelength 2 θ1/2
ηV @ 20 mA [1]λpeak (nm)λd [2] (nm)Degrees [3](lm/w)Part Number
Color Min.Typ.Typ.Typ.Typ.Typ.HSMQ-C110Green 45150520527130500HSMQ-C120
Green 45145520527155500HSMQ-C150/170/190/191Green 45145520527140500HSMQ-C177/197Green 45145520527130500HSMQ-C265Green 45140520527150500HSMR-C110Blue 186046947313088HSMR-C120Blue 185546947315588HSMR-C130
Blue 185546947314588HSMR-C150/170/190/191Blue 185546947314088HSMR-C177/197Blue 185546947313088HSMR-C265
Blue
18
45
469
473
150
88
Notes:
1.The luminous intensity, I V , is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package.
2.The dominant wavelength, λd , is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3.θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Electrical Characteristics at T A = 25?C
Forward Voltage Reverse Breakdown Capacitance C Thermal V F (Volts)V R (Volts)(pF), V F = 0,Resistance @ I F = 20 mA @ I R = 100 μA f = 1 MHz R θJ–PIN (?C/W)Part Number Typ.Max.Min.Typ.Typ.HSMQ-C110/C150 3.4 3.95140450HSMR-C110/C150 3.4 3.95140450HSMQ-C120
3.4 3.95100450HSMR-C120/C130
3.4 3.95100450HSMQ-C170/C190/C191 3.4 3.95110300HSMR-C170/C190/C191 3.4 3.95110300HSMQ-C177/C197 3.4 3.95110350HSMR-C177/C197 3.4 3.95110350HSMQ-C265 3.4 3.9565300HSMR-C265
3.4
3.9
5
65
300
V F Tolerance: ±0.1 V
Blue Color Bins [1]Dom. Wavelength (nm)Bin ID Min.Max.A 460.0465.0B 465.0470.0C 470.0475.0D
475.0480.0
Note:
Color Bin Limits [1]InGaN Green Color Bins [1]
Dom. Wavelength (nm)Bin ID
Min.Max.A 515.0520.0B 520.0525.0C 525.0530.0D
530.0535.0
Tolerance: ±1 nm
Tolerance: ±1 nm
Figure 1. Relative intensity vs. wavelength.
Light Intensity (Iv) Bin Limits[1]
Intensity (mcd)Intensity (mcd)
Bin ID Min.Max.Bin ID Min.Max.
A0.110.18N28.5045.00
B0.180.29P45.0071.50
C0.290.45Q71.50112.50
D0.450.72R112.50180.00
E0.72 1.10S180.00285.00
F 1.10 1.80T285.00450.00
G 1.80 2.80U450.00715.00
H 2.80 4.50V715.001125.00
J 4.507.20W1125.001800.00
K7.2011.20X1800.002850.00
L11.2018.00Y2850.004500.00
M18.0028.50
Tolerance: ±15%
Note:
1.Bin categories are established for classification of products. Products may not be available in all
categories. Please contact your Agilent representative for information on currently available bins.
Figure 2. Forward current vs. forward voltage.Figure 3. Luminous intensity vs. forward Figure 4. Maximum forward current vs.
10
1
0.1
V F – FORWARD VOLTAGE – V
I
F
–
F
O
R
W
A
R
D
C
U
R
R
E
N
T
–
m
A
I F – FORWARD CURRENT – mA
L
U
M
I
N
O
U
S
I
N
T
E
N
S
I
T
Y
(
N
O
R
M
A
L
I
Z
E
D
A
T
2
m
A
)
WAVELENGTH – nm
R
E
L
A
T
I
V
E
I
N
T
E
N
S
I
T
Y
–
%
100
50
600700
BLUE GREEN
500
400
90
80
70
60
40
30
20
10
5
I
F
M
A
X
–
M
A
X
I
M
U
M
F
O
R
W
A
R
D
C
U
R
R
E
N
T
–
m
A
T A – AMBIENT TEMPERATURE – °C
15
10
20
25
Figure 5. Relative intensity vs. angle for HSMx-C110.
R E L A T I V E I N T E N S I T Y – %
1000ANGLE
80
60
2040
-70-50-3030507090
-90
-1010R E L A T I V E I N T E N S I T Y – %
1000ANGLE
80
60
2040
-70-50-3030507090
-90
-101010090
8070
605040302010
R E L A T I V E I N T E N S I T Y
-90-80-70-60-50-40-30-20-100
102030405060708090
ANGLE
100908070
605040302010
R E L A T I V E I N T E N S I T Y
-90-80-70-60-50-40-30-20-100
102030405060708090
ANGLE
Figure 9. Relative intensity vs. angle for HSMx-C170, C190, C191, and C150.
Figure 7. Relative intensity vs. angle for HSMx-C177 and C197.
Figure 8. Relative intensity vs. angle for HSMx-C130.
R E L A T I V E I N T E N S I T Y – %
1000
ANGLE
806050702010
304090
-70-50-300
2030507090
-90-20-80-60-40-10
10406080R E L A T I V E I N T E N S I T Y – %
1000
ANGLE
806050702010
304090
-70-50-300
2030507090
-90-20-80-60-40-10
10406080R E L A T I V E I N T E N S I T Y – %
1000
ANGLE
806050702010
304090-70-50-300
2030507090
-90-20-80-60-40-10
10406080R E L A T I V E I N T E N S I T Y – %
1000
ANGLE
806050702010
304090-70-50-300
2030507090
-90-20-80-60-40-10
10406080
Figure 12. Recommended Pb-free reflow soldering profile.
Figure 13. Recommended soldering pattern for HSMx-C110.Figure 14. Recommended soldering pattern for HSMx-C170/177.
(0.059)
(0.059)
(0.079)
(0.035)
Figure 16. Recommended soldering pattern for HSMx-C150.
(0.059)(0.059)
(0.079)Figure 15. Recommended soldering pattern for H SMx-C130/190/191/197.
0.8 (0.028)
Figure 17. Recommended soldering pattern for HSMx-C120.
Figure 18. Recommended soldering pattern for HSMx-C265.
(0.031)
(0.031)
(0.047)
TIME
T E M P E R A T U R * THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX.
Figure 11. Recommended reflow soldering profile.T E M P E R A T U R E
Figure 19. Reeling orientation.
Figure 20. Reel dimensions.
? 20.20 MIN. (? 0.795 MIN.)
? 13.1 ± 0.5
Figure 21. Tape dimensions.
DIMENSIONS IN MILLIMETERS (INCHES)
DIM. A ± 0.10 (0.004)DIM. B ± 0.10 (0.004)PART NUMBER DIM. C ± 0.10 (0.004)
FOR HSMx-C110 1.20 (0.047) 0.80 (0.031) 1.27 (0.050) 0.95 (0.037) 0.70 (0.028) 0.87 (0.034) 0.85 (0.033) 0.60 (0.024)0.23 ± 0.05 (0.009 ± 0.002) FOR HSMR-C130
R 0.5 ± 0.05 (0.020 ± 0.002) FOR HSMx-C120
HSMx-C110 SERIES HSMx-C120 SERIES HSMx-C150 SERIES HSMx-C170 SERIES HSMx-C177 SERIES HSMx-C190 SERIES HSMx-C191 SERIES HSMx-C197 SERIES
3.40 (0.134) 1.90 (0.075) 3.50 (0.138) 2.30 (0.091) 2.25 (0.089) 1.80 (0.071) 1.85 (0.073) 1.75 (0.069)
1.70 (0.067)
1.15 (0.045)
1.88 (0.074)
1.45 (0.057)
1.32 (0.052)
0.95 (0.037)
0.88 (0.035)
0.95 (0.037)
HSMx-C265 SERIES 3.70 (0.146) 1.45 (0.057) 1.30 (0.051)
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
DIM. A ± 0.10 (0.004)DIM. B ± 0.10 (0.004)PART NUMBER
DIM. C ± 0.10 (0.004)
Figure 22. Tape leader and trailer dimensions.Convective IR Reflow Soldering For more information on IR reflow soldering, refer to Application Note 1060, Surface Mounting SMT LED Indicator Components.
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.Storage Condition:
5 to 30°C @ 60% RH max.
Baking is required under the condition:
a) the blue silica gel indicator
becoming white/transparent
color
b) the pack has been open for
more than 1 week
Baking recommended condition: 60 ± 5°C for 20 hours.
END START
SEALED WITH COVER TAPE.SEALED WITH COVER
TAPE.
OF CARRIER
AND/OR
COVER TAPE.
https://www.wendangku.net/doc/7a17040660.html,/semiconductors For product information and a complete list of distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or (916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843
Data subject to change.
Copyright ? 2004 Agilent Technologies, Inc. Obsoletes 5988-4832EN