Creative Works

2005 Shocker Scholarship Festival

April 27, 2006

University Libraries Bibliography of Wichita State University 2005 Faculty Publications and

Creative Works

https://www.wendangku.net/doc/7818438769.html,/shockerscholarship.htm

Information in this bibliography was obtained from WSU colleges. To add or correct entries, email:

kathy.downes@https://www.wendangku.net/doc/7818438769.html,

College of Education(49)

Alagic, M., K. L. Gibson, and G. M. Rimmington. 2005. Developing intercultural communication skills with the Cage Painting Simulator. Paper read at International Conference on the Corporate Spirit of Educational Institutions as a Factor for Personal Development, at Khabarovsk, Russia. Alagic, M., and D. Palenz. 2005. Dynamic geometry/art in mathematics classrooms. Paper read at Renaissance Banff Conference, at Winfield, KS.

Alagic, M., C. Doyle, K. Gibson, C. Yeotis, and D. Kear. 2005. Re-defining learning activities in ICT-based environments. Paper read at International Society for Information Technology &

Teacher Education International Conference, at Norfolk, VA.

———. 2005. Re-defining learning activities: ICT-generated paradigm change. Paper read at International Society for Information Technology & Teacher Education International Conference, at Norfolk, VA.

Calabrese, R. L., D. Sheppard, C. Hummel, C. Laramore, and E. Nance. 2005. Identifying teachers’ and administrators’ perceptions of the efficacy of professional development: Wichita State

University, Wichita, KS.

Calabrese, R. L., S. Goodvin, and R. Niles 2005. Identifying the traits and attitudes of effective teachers with an at-risk student population in a multi-cultural urban high school. The

International Journal of Educational Management 19 (5):437-449.

Champley, J., and M. E. Rogers 2005. Body of evidence: Impairments can multiply after stroke. Advance for Directors in Rehabilitation 14 (1):43-46.

Doyle, C. . 2005. Evaluating technology as a tool for learning science. Paper read at International Society for Information Technology & Teacher Education International Conference, at Norfolk, VA. Easter, B. A., and G. C. Stoldt 2005. Public relations effectiveness, organizational culture related. College Sports Information Directors of American Digest (57):29-31.

Gibson, K. . 2005. Encouraging constructivist learning in an ICT-rich environment. Paper read at International Society for Information Technology & Teacher Education International Conference, at Norfolk, VA.

Gibson, K. L., and L. M. Mitchell 2005. Critical curriculum components in programs for young gifted learners. International Education Journal 6 (2):164-169.

Hasegawa, R., M. M. Islam, E. Nasu, S. Lee, D. Koizumi, N. Takeshima, H. Minamizawa, and M. E. Rogers 2005. Effects of community- and home-based resistance training on joint pain and muscular

strength in older adults. Medicine and Science in Sports and Exercise (37):S187.

Hayes, J. L. . 2005. Alternative certification—Facilitating the adult learner. The Advocate 13 (1):22. Huber-Warring, T., L. Mitchell, M. Alagic, and I. Gibson 2005. Multicultural/diversity outcomes: Assessing students’ knowledge bases across programs in one college of education. Journal of

Thought 40 (3):25-50.

Islam, M. M., N. Takeshima, M. E. Rogers, D. Koizumi, W. F. Brechue, and K. Tanaka. 2005. A comparison of cardiorespiratory fitness and blood lipid profile among inactive people, walkers and runners

in elderly Japanese men. Asian Journal of Exercise and Sport Science (1):25-32.

Islam, M. M., N. Takeshima, M. E. Rogers, T. Yamauchi, D. Koizumi, Y. Wang, and N. L. Rogers. 2005.

Decline of functional fitness in free living Japanese older adults. Asian Journal of Exercise and

Sport Science (1):9-15.

Jewell, P. . 2005. What does mentoring mean to experienced teachers? A phenomenological interview study. The Advocate 13 (1):24-25.

Kear, D. J., and M. Alagic 2005. Enriching learning and assessment: Handhelds as cognitive tools.

Paper read at Society for Information Technology and Teacher Education, at Phoenix, AZ. Kear, D. J. . 2005. Impacting teacher writing through blogging. Paper read at E-Learn: World Conference on E-Learning in Corporate, Government, Healthcare, and Higher Education, at

Vancouver, BC.

Lefever-Davis, S., and C. Pearman 2005. Early readers and electronic texts: CD-ROM storybook features that influence reading behaviors. The Reading Teacher 58 (5):4-10.

McDowell, K. . 2005. Phonological distinctness: Educational implications. Advocate 13 (1):12-18. McDowell, K., and V. Rauch. 2005. Teacher work samples: What are we really measuring? Paper read at Journal of the Association of Teacher Educators—Kansas.

McKellar, N. . 2005. Multidisciplinary teams. In Encyclopedia of school psychology edited by S. W. Lee.

Thousand Oaks, CA: Sage Publications.

McKenna, M. C., and D. J. Kear 2005. Measuring attitude toward reading: A new tool for teachers. In Reading assessment: Principles and practices for elementary teachers (2nd ed.), edited by S.

Barrentine. Newark, DE: International Reading Association.

Miller, L. K., G. C. Stoldt, and P. G. Comfort 2005. Sport management. Edited by S. Hoffman, Introduction to kinesiology (2nd ed.). Champaign, IL: Human Kinetics.

Mitchell, L. M. . 2005. Impacting teacher candidates’ knowledge, skills, and dispositions regarding diversity: Faculty triggers. . Journal of Thought 40 (3):91-103.

Mitchell, L. M. . 2005. Investigating the effect of preschool children’s participation in NAEYC centers as it relates to school readiness/success: United Way of the Plains and the Kansas Children’s Cabinet and Trust Fund.

Mitchell, L. M., F. L. Clark, and K. L. Gibson. 2005. Personnel preparation: It’s where inclusion begins. Paper read at International Association of Special Education Conference, at Halifax, Nova Scotia.

Mooney, P., J. B. Ryan, R. Reid, B. M. Uhing, and M. H. Epstein. 2005. A review of self-management learning interventions on academic outcomes for students with emotional and behavioral

disorders. Journal of Behavioral Education (14):203-22`.

Page, P., J. Krieg, J., N. L. Rogers, and M. E. Rogers. 2005. A pilot study to examine the effect of textured plantar surfaces on postural stability. Medicine and Science in Sports and Exercise

(37):S160-161.

Patterson, J. A., R. Niles, C. Carlson, and W. Kelley. 2005. Bridging the achievement gap in Parsons USD 503: Wichita State University, Wichita, KS.

Patterson, J. A., S. E. Selig, D. Toia, R. H. Geerling, V. Bamroongsuk, and D. L. Hare. 2005.

Comparing methods for prescribing exercise for patients with chronic heart failure. Journal of

Exercise Physiology 8 (4):9-19.

Patterson, J. A., K. Bielefeld, T. Ellsworth, A. Ewings, S. Landwehr, K. Mize, V. Naccarato, and T. Rink. 2005. Kansas K-12 teachers’ perceptions of high stakes testing: Wichita State

University, Wichita, KS.

Rimmington, G. M. . 2005. Challenges for education toward 2010. Paper read at Empire of Interdependence Conference, at Friends University, Wichita, KS.

Rimmington, G. M., and S. Bever-Goodvin 2005. Global learning for developing intra- and inter-personal intelligences. Paper read at Society for Information Technology and Teacher Education, at Phoenix, AZ.

Rogers, M. E., N. L. Rogers, and N. Takeshima 2005. Balance training in older adults. Journal of Aging Health (1):475-486.

Rogers, M. E., and N. L. Rogers. 2005. Get your patients moving. Healthy Aging (1):23-26. Rogers, M. E. . 2005. Preexercise and health screening. In Physical activity instruction of older adults, edited by C. J. J. D. J. Rose. Champaign, IL: Human Kinetics.

Rogers, M. E. . 2005. Standing strong. IDEA Fitness Journal 2 (6):64-73.

Schommer-Aikins, M., O. K. Duell, and R. Hutter. 2005. Epistemological beliefs, mathematical problem-solving beliefs, and academic performance of middle school students. The Elementary

School Journal of Aging Health (105):289-304.

Stoldt, G. C., and V. Narasimhan 2005. Self assessments of collegiate sports information professionals regarding their public relations task expertise. International Journal of Sport Management 6

(3):252-269.

Swanson, T. J., B. W. Hodson, and M. Schommer-Aikins. 2005. An examination of phonological awareness treatment outcomes for seventh-grade poor readers from a bilingual community.

Language, Speech, and Hearing Services in Schools (36):336-345.

Takeshima, N., M. M. Islam, D. Koizumi, E. Nasu, S. Lee, and M. E. Rogers 2005. Effects of combined balance and resistance exercises on fall incidence in frail older adults. Medicine and Science in

Sports and Exercise (37):S10.

Tran, Anh. 2005. Asian Americans. In The seventies in America. Pasadena, CA: Salem Press.

Tran, Anh 2005. Tolerance revisited. Multicultural Education 12 (4):50-52.

Turk, R. L., G. Alvarez, L. Beaudoin, K. Breese, Q. Breese, J. Fisher, C. Moddelmog, R. Wallace, and D.

Walter. 2005. Change process in the context of implementing a one-to-one computer initiative in

a midsize high school: Wichita State University, Wichita, KS.

Turk, R. L., D. Gross, R. Miller, and M. Stessman. 2005. A study of budget alternatives in Renwick public schools, USD 267: Wichita State University, Wichita, KS.

Uhing, B. M., P. Mooney, and G. Ryser. 2005. Differences in strength assessment scores for youth with and without ED across the youth and parent rating scales of the BERS-2. Journal of

Emotional and Behavioral Disorders 13 (3):181-187.

Yamauchi, T., M. M. Islam, D. Koizumi, M. E. Rogers, N. L. Rogers, and N. Takeshima. 2005. Effect of home-based well-rounded exercise in community-dwelling older adults. Journal of Science and Sports Medicine (4):563-571.

College of Engineering(252)

Aaron, V., A. Adibi, and B. Bahr 2004. Optimization o Analysis of Maximum Energy Absorption Properties of Metallic Honeycomb and Application in Designing Arresting Member of Landing Gear Drop Testing. Paper read at IMECE, at Anaheim, CA.

Adams, A., and H. M. Lankarani. 2005. A Modeling Approach for Crashworthiness Evaluation of an Aircraft Fuselage Section with Conformable Auxiliary Fuel Tank. Paper read at Fourth Aircraft Fire and Cabin Safety Research Conference, at Lisbon, Portugal.

Adibi-Sedeh, A., H. Vaziri, M. Pednekar, V. Madhavan, and R. Ivester. 2005. Investigation of the effect of using different material models on finite element simulations of machining. Paper read at 8th CIRP International Workshop on Modeling of Machining Operations, at Chemnitz,

Germany.

Altarazi, K., S. K. Jayaweera, and V. Aravinthan. 2005. Performance of Decentralized Detection in a Resource constrained Sensor Network. Paper read at 39th Annual Asilomar Conference on

Signals, Systems and Computers, at Pacific Grove, CA.

Altarazi, S. A., and S. H. Cheraghi. 2005. Experts based new tolerance allocation methods Paper read at GRASP, at WSU.

Altarazi, S. A., and S. H. Cheraghi. 2005. Fuzzy process capability evaluation. Paper read at Industrial Engineering Research Conference (IERC), at Denver, Colorado.

Altarazi, S. A., and S. H. Cheraghi. 2005. An Operational tolerance allocation method with probabilistic process capability Paper read at Industrial Engineering Research Conference (IERC), at Denver, Colorado.

Arbindi, S., R. P. Mann, and K. Namuduri. 2005. Control Traffic Analysis in Ad Hoc Wireless Networks.

Paper read at IEEE Vehicular Technology Conference, at Dallas, TX.

Arbindi, S., K. R. Namuduri, and R. Pendse. 2005. Statistical Estimation of Route Expiry Times in On-Demand Ad Hoc Routing Protocols. Paper read at International Workshop on Localized

Communication and Topology Protocols for Ad Hoc Networks, at Washington, DC. Balasubramanian, S., I. Elangovan, S. K. Jayaweera, and K. R. Namuduri. 2005. Energy-aware Collaborative Tracking with Ad-hoc Wireless Sensor Networks Paper read at IEEE Wireless. Com.

Networking Conf., at New Orleans, LA.

Balasubramanian, S., S. K. Jayaweera, and K. Namuduri. 2005. Energy-Aware, Collaborative Tracking with Ad-Hoc Wireless Sensor Networks. Paper read at IEEE Wireless Communications and

Networking Conference, at New Orleans, LA.

Bam, L., and W. Jewell 2005. Review: power system analysis software tools. Paper read at IEEE Power Engineering Society General Meeting, at San Francisco, CA.

Beck, C. W., and T. S. Ravigururajan. 2005. Influence of Aspect Ratio on Flows in Microchannels. Paper read at ISHMT-ASME Int’l Conf. Heat and Mass Transfer at Kalpakkam, India.

Behrman, E. C., J. E. Steck, P. Kumar, and S. R. Skinner. 2005. A Dynamic Learning Paradigm for Quantum Computers In American Physical Society March Meeting.

Bernbeck-Martin, Malzahn, and Whitman. 2005. Simulating an aircraft move rate. Paper read at 10th Annual International Conference on Industrial Engineering Theory, Applications & Practice, at

Clearwater Beach, Florida.

Burnham, A. J., C. Baker, and K.S. Raju. 2005. Bearing Responses of Laminated Composites Joined Using Blind Rivets. Paper read at AIAA Student Conference – Midwest Region, at Wichita State

University.

C. M., B. Smith, and B Kumar. 2005. The Effect of Dents on the Fatigue Life of 2024-T3 and 7475-T7351

Aluminum Alloys: NIS.

C. Tan, M. Papadakis, and S.C. Wong. 2005. Icing Tanker Spray Nozzle Characteristics and Performance

Evaluation – Test Results (24 slides). Wichita, KS.

Cakar, T., M. B. Yildirim, and M. Barut. 2005. A neuro-genetic approach to design and planning of a

manufacturing cell. Journal of Intelligent Manufacturing 16 (4-5):453-462.

Cetinkaya, C. 2005. Achieving per Node Throughput Fairness in a Single-Branch of Mesh Networks. Paper read at IEEE Emerging Technologies, at Richardson, TX.

Cetinkaya, C. 2005. Networking the World Wirelessly.

Chebolu, M. L., and S. K. Jayaweera. 2004. Energy Efficiency Analysis of an RLS-based Adaptive Signal Processing Algorithm for Energy Aware Sensor Networks. Paper read at 2nd International

Conference on Intelligent Sensing and Information Processing, at Chennai, India

———. 2005. Integrated Design of STBC-based Virtual-MIMO And Distributed Compression in Energy-Limited Wireless Sensor Networks. Paper read at 2nd European Workshop on Wireless Sensor

Networks, at Istanbul, Turkey.

Cheraghi, S., Wei Liu Hossein, and G. Weheba. 2005. An examination of the effect of variations in datum target on part Acceptance. International Journal of Machine Tools and Manufacture 45

(9):1037-1046.

Choe, Sangho, Hyuck M. Kwon, and Murat Uysal. 2005. Performance analysis of imperfect closed-loop power control over Rayleigh fading IEE Electronics Letters 41 (19):1071–1072.

D. Patel, G. Weheba, and M. Sathaye. 2005. Six-Sigma in Small Organizations: A Case Study. Paper read

at The Annual International Conference on Industry, Engineering and Management Systems, at Cocoa Beach, FL.

Davis, K., S. Kotowski, and M. Jorgensen. 2005. Development of an exposure assessment method for job rotation. Paper read at 49th Annual Meeting of the Human Factors and Ergonomics Society, at Orlando, FL.

Davis, KG, S. Kotowski, M. J. Jorgensen, and S. Hyang. 2005. Repeatability of a video-based ergonomic assessment method for multiple body parts. Paper read at International Occupational Ergonomics and Safety Conference, at Las Vegas, NV.

Davis, K. G., and M. J. Jorgensen. 2005. Biomechanical modeling for understanding of low back injuries:

A systematic review. Occupational Ergonomics 5 (1):57-76.

Davis, K. G., M. J. Jorgensen. 2005. Pros and Cons of Job Rotation as a Means of Reducing Injury Costs.

Journal of Occupational and Environmental Hygiene 2 (1):D1-D3 2005.

Driessen, B. J., and N. Sadegh. 2004. Convergence Theory for Multi-Input Discrete-Time Iterative Learning Control With Coulomb Friction, Continuous Outputs, and Input Bounds International

Journal of Adaptive Control and Signal Processing 18 (5):457-471.

Duman E., and M. B. Yildirim.2005. Workload Balancing in Printed Circuit Board Assembly Shops Dogus University Journal 6 (1):67-78.

Farrell, T., and L. S. Miller. 2005. Development of a New Boundary Layer Control Technique for Automotive Wind Tunnel Testing. Paper read at AIAA Region V Student Paper Conference, at

Wichita, KS.

Flores, P., J. C. P. Claro, J. A. C. Ambrosio, H. M. Lankarani, and C. S. Koshy. 2004. Experimental Investigation of an Slider-Crank Mechanism with Clearance Joints. Paper read at 4th Forum dos Investigadores Portugueses, at Coimbra, Portugal.

Flores, P., H. M. Lankarani, J. Ambrosio, and J. C. P. Claro. 2004. Modeling Lubricated Revolute Clearance Joints in Multibody Mechanical Systems. Journal of Multi-body Dynamics 218 (Part

K):183-190.

Flores, P., J. C. P. Claro, J. A. C. Ambrosio, and H. M. Lankarani .2005. Dynamic Analysis of Mechanical Systems with Joint Imperfections. Paper read at 4th Forum dos Investigadores Portugueses, at

Coimbra, Portugal.

Flores, P., H. M. Lankarani, J. A. C. Ambrosio, and J. C. Pimenta Claro 2005. Modeling Translational Joints with Clearance in Multibody Systems. Paper read at Congresso de Metodos Computacionais em Engenharia, at Lisbon, Portugal.

Flores, P., J. C. P. Claro, J. Ambrosio, and H.M. Lankarani. 2005. Study of Contact-Impact Force Models in Multibody Mechanical Systems. Paper read at Tenth Conference on Nonlinear Vibrations,

Stability, and Dynamics of Structures, at Blacksburg, Virginia.

Flores, P., H. M. Lankarani,C. S. Koshy, J. A. C. Ambrosio, and J. C. Pimenta Claro

2005. Theoretical and Experimental Investigation of Mechanical Systems with

Imperfections. Paper read at Fifth Portuguese National Conference in Experimental Mechanics, at Coimbra, Portugal.

G. Piper, J. Watkins, and O. Thorp. 2005. Active Control of Axial-flow Fan Noise Using Magnetic Bearings

Journal of Vibration and Control 11 (9):1221-1232.

G. Weheba, S. Tandon, and J. Sheikh-Ahmad. 2005. Rapid Prototyping of EDM Electrodes Using

Stereolithography. Paper read at Industrial Engineering Research Conference, at Atlanta, GA. Gagnebin, P. K., S. R. Skinner, E. C. Behrman, J. E. Steck, Z. Zhou, and S. Han 2005. Quantum Gates using a Pulsed Bias Scheme Physical Review A 72 (042311):1.

———. 2005. Quantum Gates using a Pulsed Bias Scheme. Virtual Journal of Nanoscale Science & Technology.

———. 2005. Quantum Gates using a Pulsed Bias Scheme. Virtual Journal of Quantum Information. ———. 2005. Quantum Gates using a Pulsed Bias Scheme. Virtual Journal of Applications of Superconductivity.

Gaonkar, R., V. Madhavan, and W. Zhao. 2005. Virtual environment for assembly operations with improved grasp interaction. Paper read at 10th IJIE Conference, at Clearwater, FL.

Gill, Raman S., Ward Jewell, Ted Grossardt, and Keiron Bailey. 2005. ELECTRIC TRANSMISSION LINE ROUTING. Paper read at Urban and Regional Information Systems Association Annual

Conference, at Kansas City.

Gill, Raman S., Ward Jewell, Ted Grossardt, Keiron Bailey. 2005. Electric Transmission Line Routing. Gill, Raman S., and Ward Jewell. 2005. Non-Point Impact Features in Transmission Line Routing. Paper read at Frontiers of Power, at Oklahoma State Univ.

Goyal, Ashutosh, and Hyuck M. Kwon. 2005. Hyperbolic Tangent Function Avoided for Encoded Pilot Low Density Parity Check Decoding. Paper read at European Microwave Week, Wireless

Telecommunications, at Paris.

Goyal, Ashutosh, and Hyuck M. Kwon. 2005. A Simulation Model for Different Complex Wall Structures in Subways of Urban Microcells at Millimeter Wave Frequency 35 GHz. Paper read at International Union of Radio Science (URSI), National Radio Science Meeting, at University of Colorado at

Boulder.

H. Qiu, H. T. Liao, and J. Lee. 2005. Degradation Assessment for Machinery Prognostics Using Hidden

Markov Models. Paper read at ASME International 20th Biennial Conference on Mechanical

Vibration and Noise, at Long Beach, CA.

Hashempour, H., F. J. Meyer, F. Lombardi. 2005. Analysis and Evaluation of Multisite Testing for VLSI IEEE Transactions in Instrumentation and Measurement 54 (5):1770-1778. Hermann, T., and J. Locke.2005. Failure Analysis of Anisotropic Composites utilizing Commercial FEA Software. Paper read at 43rd AIAA Aerospace Sciences Meeting and Exhibit, at Reno, NV. Hermann, T., D. Mamarthupatti, and J. Locke.2005. Postbuckling Analysis of a Wind Turbine Blade Substructure ASME Journal of Solar Energy Engineering 127 (4):544-552.

Hermann, T., D. Mamarthupatti, and J. Locke.2005. Postbuckling Analysis of Laminate Composites utilizing Commercial FEA Software. Paper read at 43rd AIAA Aerospace Sciences Meeting and

Exhibit, at Reno, NV.

Heron, I., and R. Myose.2005. Impingement of von Karman Vortex Street on a Delta Wing. AIAA Journal of Aircraft (42):1084-1087.

I. Heron, and R. Myose. 2005. Vortex Burst Behavior under Dynamic Freestream. Paper read at 43rd

AIAA Aerospace Sciences Meeting, at Reno, NV.

J. Steck, K. Rokhsaz, U. J. Pesonen, B. Singh, and R. Chandramohan. 2005. Effect of Turbulence on an Adaptive Dynamic Inverse Flight Controller. Paper read at AIAA Infotech @Aerospace, at

Crystal City, VA.

Jacob, K., B. Smith, and B. Kumar.2005. The Effect of Dents on Crack Growth of 2024-T3, 7475-T7351 and 7050-T7451 Aluminum Alloys: NIS.

Jayaweera, S. K. 2004. Energy Efficient Virtual MIMObased Cooperative Communications for Wireless Sensor Networks. Paper read at 2nd International Conference on Intelligent Sensing and

Information Processing, at Chennai, India.

Jayaweera, S. K. 2004. Optimal Bayesian Data Fusion and Lowcomplexity Approximations for Distributed

DS-CDMA Wireless Sensor Networks. Paper read at 2nd International Conference on Intelligent

Sensing and Information Processing, at Chennai, India.

Jayaweera, S. K., and H.V. Poor. 2005. Capacity of Mulitple Antenna systems in Rician Fading IEEE Transactions on Wireless Communications. 04 (03):1102-1111.

Jayaweera , S. K. 2005. Decentralized Detection of Stochastic Signals in Powerconstrained Sensor Networks. Paper read at IEEE Workshop on Signal Processing Advances in Wireless

Communications, at New York, NY.

Jayaweera, S. K., K. Namuduri, and D. Gruenbacher. 2005. Final Technical Report: High Performance Wireless Communications Using Multiple Antenna Arrays and Efficient Source-channel Coding:

Kansas NASA EPSCoR.

Jayaweera, S. K., and M. L. Chebolu. 2005. Joint Adaptive Signal Processing And Distributed Compression For Virtual MIMO Based Energy-Aware Wireless Sensor Networks – An Integrated

Approach. Paper read at IEEE International Conference on Communications, at Seoul, Korea. Jayaweera, S. K. 2005. Large Sensor System Performance of Decentralized Detection in Noisy, Bandlimited Channels. Paper read at IEEE 61st Vehicular Technology Conference, at Stockholm, Sweden.

Jayaweera, S. K. 2005. Large system decentralization detection performance under communication constraints IEEE Communications Letters 9 (9):711-713.

Jayaweera , S. K. 2005. Large System Performance of Power constrained Distributed Detection with Analog Local Paper read at Processing WirelessCom, at Kaanapali Beach, Maui, Hawaii. Jayaweera, S. K. . 2005. Research in Distributed Signal Processing and Coding.

Jayaweera, S. K. 2005. Signal Design for Non-coherent PPM Modulation with Applications to UWB Communications IEEE Communications Letters 9 (5):411-413.

Jayaweera, S. K. 2005. Signal Design for Noncoherent UWB with PPM Modulation in Rayleigh Fading.

Paper read at IEEE Wireless Communications and Networking Conference, at New Orleans, LA. Jewell, Ward, and Gerald Heydt. 2005. Electric Energy Storage.

Jewell, Ward. 2005. Electric Power Quality in Healthcare.

Jewell, Ward. 2005. Finding/Mitigating Power Quality Sources.

———. 2005. Lightning Protection: A Stroke of Luck? Theory and Application: Customer Side Low Voltage Systems. In American Public Power Association ENGINEERING & OPERATIONS TECHNICAL

CONFERENCE, edited by A. P. P. A. E. O. T. CONFERENCE.

Jewell, Ward, and S. C. Banavasi2005. Portable power engineering lab for classroom use. Paper read at IEEE Power Engineering Society General Meeting, at San Francisco, CA.

Jewell, Ward . 2005. PRACTICAL ELECTRIC POWER QUALITY. Wichita.

Jewell, Ward, and James McCalley 2005. Risk-Based Maintenance Resource Allocation for Distribution System Reliability Enhancement.

Jewell, Ward, James McCalley, and Joe Warner 2005. Risk-Based Maintenance Resource Allocation for Distribution System Reliability Enhancement.

Jorgensen, M. J., A. Handa, and P. Veluswamy. 2004. Torso Kinematics and Low Back Disorder Risk as

a Function of Pallet Orientation. Occupational Ergonomics 4 (3):173-183.

Jorgensen, M. J., K. G. Davis, S. Kotowski, P. Aedla. 2005. Characteristics of job rotation in the Midwest U.S. manufacturing sector. Dunning Ergonomics 48 (15):1721-1733.

Jorgensen, M. J., and M. Viswanathan. 2005. Ergonomic assessment of bucking bars for riveting tasks.

Paper read at 49th Annual Meeting of the Human Factors and Ergonomics Society, at Orlando,

FL.

Jorgensen, M. J., W. S. Marras, F. W. Smith, and M. H. Pope.2005. Sagittal plane moment arms of the female lumbar region rectus abdominis in an upright neutral torso posture. Clinical Biomechanics

3 (242-246).

Jorgensen. M. J., A. Handa, P. Veluswamy, and M. Bhatt. 2005. The effect of pallet distance on torso kinematics and low back disorder risk. Ergonomics 48 (8):949-963.

Joshi, D., K. R. Namuduri, and R. Pendse. 2005. Secure, Redundant, Fully Distributed Key Management scheme for Mobile Adhoc Networks: An Analysis. EURASIP Journal on Wireless Communications and Networks 4:579-589.

K. Rokhsaz, J. Steck, R. Chandramohan, and B. Singh. 2005. Response of an Advanced Flight Control System to Microburst Encounters. Paper read at SAE Aero Tech World Aviation Congress, at

Dallas/Ft Worth, TX.

Kahai, P., M. Srinivasan, K. R. Namuduri, and R. Pendse. 2005. Forensic Profiling System Paper read at First International Conference on Digital Forensics, at Orlando, FL.

Kalla, D., P. Lodhia, B. Bajracharya, J. Twomey, and J. Sheikh-Ahmad. 2005. CN Force Predication Model in Milling of Carbon Fiber Reinforced Polymers. Paper read at Intelligent Systems in Design and Manufacturing VI, at Boston, Massachusetts.

Khalidi, S., G. Weheba, and M. Jorgensen. 2005. Quality and Ergonomics: An Interactive Relationship Paper read at The Annual International Conference on Industry, Engineering and Management Systems, at Cocoa Beach, FL.

Khan, O., K. A. Hoffmann, and J. F. Dietiker 2005. Numerical Investigation of Magnetogasdynamic High Speed Flows. Paper read at 43rd AIAA Aerospace Sciences Meeting and Exhibit, at Reno, NV. Khan, O. U., and K. A. Hoffmann.2005. Numerical Investigation of Magnetohyrodynamics high Speed Flows. Paper read at 43rd AIAA Aerospace Sciences Meeting, at Reno, NV.

Kharel, Rudra, and Ward Jewell. 2005. Analysis of Wind Power Integration in the Flint Hills Area of Kansas. Paper read at Frontiers of Power, at Oklahoma State Univ.

Kittusamy, N. K., M. Viswanathan, and M. J. Jorgensen.2005. Field Study to Evaluate the Effectiveness of a Continuous Passive Lumbar Motion System. Paper read at International Occupational

Ergonomics and Safety Conference, at Las Vegas, NV.

Kotowski S., K. Davis, and M. Jorgensen.2005. Repeatability of an exposure assessment method for job rotation. Paper read at 49th Annual Meeting of the Human Factors and Ergonomics Society, at

Orlando, FL.

Krishnaiyer, K., and S. Hossein Cheraghi. 2005. Ant Algorithms: Web-Based Implementation and Applications to Manufacturing System Problems. International Journal of Computer Integrated

Manufacturing.

Krishnan K., H. Jitvatech, C. Nayak, and M. B. Yildirim. 2005. A Material Handling Scheduling System in an Agent Based Environment 35th International Conference on Computers and Industrial

Engineering. Paper read at 5th International Conference on Computers and Industrial

Engineering, at Istanbul Turkey.

Krishnan, K.K., C. Nayak, S. H. Cheraghi, and C. Dave. 2005. Integrated Facility Layout for Heterogeneous Material Handling Systems using Hybrid Genetic Algorithm Paper read at

Computers in Industrial Engineering, at Istanbul, Turkey.

Kumar, Brijesh, James. E. Locke, Chaminda Gomes, and Sriranga Nagend. 2005. Determination of Fatigue Crack Growth Rates in Scratched and Shot Peened 7050 and 7075 Aluminum Alloys. In

8th Joint FAA/DoD/NASA Aging Aircraft Conference.

Kumar, P., S. R. Skinner, E. C. Behrman, and J. E. Steck. 2005. Quantum Gates using a Pulsed Bias Scheme. In American Physical Society Meeting.

Kwon, Hyuck M., Ashutosh Goyal, Khurram Hassan, and Yong H. Lee.2005. Encoded Pilot Placement for LDPC Iterative Receiver. Paper read at IEEE Vehicular Technology Conference, at Dallas, TX.

Kwon, Hyuck M. 2005. Encoded Pilots and Iterative Receiver, edited by S. a. P. University. Beijing, China. ———. 2005. Encoded Pilots and Iterative Receiver. In Seminar Telecommunication Suwon, Korea. ———. 2005. Encoded Pilots and Iterative Receiver. Dae-Jeon, Korea.

———. 2005. Encoded Pilots and Iterative Receiver. An-Yang, Korea.

Kwon, Hyuck M., Khurram Hassan, Ashutosh Goyal,Mi-Kyung Oh, Dong-Jo Park, and Yong H.

Lee. 2005. Encoded Pilots for Iterative Receiver Improvement. Paper read at IEEE Vehicular

Technology Conference, at Dallas, TX.

Kyureghyan N., M. J. Jorgensen, D. Burr, and W. S. Marras. 2005. The prediction of lumbar spine geometry: Method development and validation. Clinical Biomechanics 20 (5):455-464. Lankarani, H. M., C. S. Koshy, G. Kanetkar, P. Flores, J. C. P. Claro, and J. Ambrosio 2004.

Experimental Study on Multibody Systems with Clearance Joints. Paper read at Asian Conference on Multibody Dynamics, at Seoul, Korea.

Lankarani, H. M. 2005. Modeling Dynamic Responses of and Injury Potential to Occupants on Side-facing Aircraft Seats. Paper read at Fourth Aircraft Fire and Cabin Safety Research Conference, at

Lisbon, Portugal.

Lee, D-G, M. E. Sawan, G. H. Heo, I. Hyun, G. Lee, and W. Lee. 2005. Unified Bounds using the Solution of Lyapunov Matrix Equation. Paper read at Korean Automatic Control Conference, at Daejun,

Korea.

Lee, K., K. H. Shim, and M. E. Sawan.2005. Unified Modeling for Singularly Perturbed Systems by Delta Operators: Pole Assignment Case Lecture Notes in Computer Science LNAI 3397:24-32. Letelier, M. F., and D. A. Siginer. 2004. Unsteady Flow of a Non-Linear Viscoelastic Fluid in Pipes. Paper read at American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, at Anaheim, CA.

Liao, H. T., and E. A. Elsayed. 2005. Optimization of System Reliability Robustness Using Accelerated Degradation Testing. Paper read at 51st Annual Reliability and Maintainability Symposium, at

Alexandria, VA.

Liao, H.T., D. M. Lin, H. Qiu, D. Banjevic, A. Jardine, and J. Lee. 2005. A Predictive Tool for Remaining Useful Life Estimation of Rotating Machinery Components. Paper read at ASME International 20th Biennial Conference on Mechanical Vibration and Noise, at Long Beach, CA.

Lo, S. C., and K.A. Hoffmann 2005. Detached-Eddy Simulation of Flows Over a Square Cylinder. Paper read at 43rd AIAA Aerospace Sciences Meeting, at Reno, NV.

Lo, S.C., K. A. Hoffman, and J. F. Dietiker. 2005. Numerical Investigation of High Reynolds number Flows Over Square and Circular Cylinders. Journal of Thermophysics and Heat Transfer 19

(1):72-80.

Locke, James, and Brijesh Kumar.2005. Effect of Shot Peening on the Fatigue Endurance and Fatigue crack Growth Rate of 7050 and 7075 Aluminum Alloys. In 11th International Conference on

Fracture.

Locke, James, Brijesh Kumar, and Lamia Salah. 2005. Effects of Load Transfer, Fastener Type and Hole Preparation on the Fatigue Behavior of Aluminum Alloy Joints. In 8th Joint FAA/DoD/NASA Aging Aircraft Conference.

Locke, James, and Brijesh Kumar.2005. The Effects of Residual Stress on the Fatigue Endurance and Fatigue crack Growth Rate of 7050 and 7075 Aluminum Alloys. In International Conference on

Computational and Experimental Engineering and Sciences.

Madhavan, V., and A. Hijazi2005. A Novel Multi-Channel Non-Intensified Ultra High Speed Camera for Use in Digital Image Correlation. Paper read at NSF Design, Service and Manufacturing

Grantees and Research Conference, at Scottsdale, AZ.

Madhavan, V., and A. H. Adibi-Sedeh. 2005. Understanding of Finite Element Analysis Results Under the Framework of Oxley’s Machining Model. Machining Science and Technology 9 (3):345-368. Mann, R. P., K. R. Namduuri, and R. Pendse.2005. Energy Aware Routing Protocol for Wireless Sensor

Journal on Wireless Communications and Networks (5):635-644.

Networks EURASIP

Miller, L.S. 2005. Aerospace Engineering.

Miller, L.S. 2005. Aerospace Engineering.

Miller, L.S. 2005. Aerospace Oddities.

———. 2005. AIAA Distinguished Lecture. In St Louis AIAA Section Meeting Parks College.

———. 2005. AIAA Distinguished Lecture.

———. 2005. AIAA Distinguished Lecture.

———. 2005. AIAA Distinguished Lecture.

Miller, L. S. 2005. Aircraft Recognition Contest WSU AIAA Section Meeting.

Miller, L.S. 2005. Shadow Craft – A World of Secret Flight. WSU Admission Office.

Miller, L.S. 2005. Shadow Craft – A World of Secret Flight.

Miller, L.S.. 2005. Shadow Craft – A World of Secret Flight.

Miller, L.S.. 2005. Supersonic Wind Tunnel Testing.

Mohamed, T., G. Weheba, and A. Masud. 2005. Economic Design of R-Control Charts: A Proactive Approach. Paper read at Annual International Conference on Industry, Engineering and

Management Systems, at Cocoa Beach, FL.

Myose, R., T. Young, and G. Sim. 2005. Comparison of Business Jet Performance Using Different Strategies for Flight at Constant Altitude. Paper read at 5th AIAA ATIO Conference, at Crystal

City, VA.

Nagarajan, H., C. S. Koshy, and H. M. Lankarani. 2004. Development and Evaluation of a Component HIC Tester for Aircraft Seat Certification. Paper read at International Conference on

Crashworthiness, at San Francisco, CA.

Nagarajan, H., and H. M. Lankarani, and 2004. A Methodology for the Design of HIC-Compliant Aircraft Bulkheads and Divider Panels. Paper read at International Conference on Crashworthiness, at San Francisco, CA.

Namuduri, K. R. 2003-2004. Cyberinfrastructure for Screening Diabetic Retinopathy: NSF EPScoR. Namuduri, K. R., and R. Pendse. 2005. Introducing Information Security Courses in the ECE Curriculum.

Paper read at ASEE Midwest Symposium, at Fayetteville, AK.

Namuduri, K. R. 2005. Research in Computer Forensics at Wichita State University. In Forensic Educator Working Group meeting. Orlando, Florida.

O’Brien, R., and J. Watkins. 2005. A Unified Procedure for Discrete-Time Root Locus and Bode Design.

Paper read at American Control Conference, at Portland, OR.

Orsun, F., H. Topakkaya, M. A. Tunc, and C. Cetinkaya 2005. Service Differentiation Mechanism via Cooperative Medium Access Control Protocol. Paper read at Med-Hoc 2005, at Porquerolles

Island, France.

Panetto, Whitman, and Chatha 2005. Ontology for enterprise interoperability in the domain of enterprise business modelling. Paper read at Interop-ESA International Conference EI2N, WSI, ISIDI and

IEHENA, at Geneva, Switzerland.

Papadakis, M. 2005. Aerodynamic and Icing Analysis of Predator A (20 slides). Temecula, CA. Papadakis, M. 2005. Aircraft Icing Research at Wichita State University (16 slides). San Diego, CA. Papadakis, M. 2005. Aircraft Icing Research Capabilities at Wichita State University (10 slides). Starkville, MS.

Papadakis, M. 2005. Development of a 6x4 Icing Wind Tunnel Facility at WSU (20 slides) Wichita, KS.

Papadakis, M., and S. H. Wong. 2005. Development of a Wind Tunnel Model with a Bleed-Air System (28 slides). Wichita, KS.

Papadakis, M. 2005. Development of an Icing Wind Tunnel Facility at WSU (24 slides). Wichita State University, Wichita, KS.

Papadakis, M. 2005. Engineering Study of Ice Shedding (34 slides). Cleveland, OH.

———. 2005. Experimental and Computational Aerodynamics Research at WSU (49 slides). Huntsville, AL. Papadakis, M., H. W. Yeong, and I. Suares 2005. Experimental and Computational Investigation of Ice Shedding from Aircraft Surfaces: ADMRC.

Papadakis, M., and S. H. Wong. 2005. Experimental Investigation of a Bleed-Air Ice Protection System.

Paper read at SAE AeroTech Congress and Exhibition, at Dallas/Ft. Worth, TX.

Papadakis, M. 2005. Experimental Investigation of Ice Shape Effects on a NACA 23012 Airfoil (5 slides).

Cleveland, OH.

Papadakis, M., and C. Tan.2005. Future Icing Research (6 slides). Chicago, IL.

Papadakis, M.2005. General Aviation research Program – Phase II (11 slides). Cleveland, OH. Papadakis, M. 2005. Hot Air Anti-icing Research Program – HAARP (45 slides). Cleveland, OH. Papadakis, M., and S .H. Wong 2005. Hot-Air Anti-Icing Research Program – Model Design (50 slides). Chicago, IL.

Papadakis, M., H. W. Yeong, I. Suares and J. Jacob. 2005. Ice Particle Trajectory Program - Year 3 (40 slides). Wichita, KS.

Papadakis, M., H. W. Yeong, I. Suares, and J. Jacob. 2005. Ice Particle Trajectory Program - Year 3 (45 slides). Wichita, KS.

Papadakis, M., and H. W. Yeong 2005. Ice Shedding Research Program Phases I, II and III. Chicago, IL.

Papadakis, M., and C. Tan. 2005. Icing Tanker Spray Nozzle Characteristics and Performance Evaluation

(3 slides). Wichita State University, Wichita, KS.

Papadakis, M., and C. Tan. 2005. Icing Tanker Spray Nozzle Characteristics and Performance Evaluation

(3 slides). Wichita State University, Wichita, KS.

Papadakis, M., and S.H. Wong2005. Investigation of a Bleed-Air Ice Protection Systems: NASA. Papadakis, M., H. W. Yeong, J. Jacob and I. Suares. 2005. Literature Review and Engineering Study of Ice Shedding: NASA.

Papadakis, M. 2005. Next Generation Ice Protection Technologies for UAV (28 slides). Wichita, KS. Papadakis, M., and M. Bridgeford. 2005. Next Generation Ice Protection Technologies for UAV (29 slides).

San Diego, CA

Papadakis, M. 2005. Next Generation Ice Protection Technologies for Unmanned Aerial Vehicles (16 slides). WSU - Wichita, KS.

———. 2005. Overview of General Aviation Icing Research Program – Phase I (9 slides). Cleveland, OH. Papadakis, M. 2005. Overview of General Aviation Icing Research Program Phases I, II and III (13 slides) Chicago, IL.

Papadakis, M. 2005. Overview of Icing Research at Wichita State University (17 slides). Wichita, KS. Papadakis, M., H. W. Yeong, I. Suares, and J. Jacob.2005. Simulation of Ice Shedding from Aircraft Surfaces. Paper read at SAE AeroTech Congress and Exhibition, at Dallas/Ft. Worth, TX. Papadakis, M. 2005. Status of WSU/FAA Icing Research Programs (2 slides). Chicago, IL.

Papadakis, M., and D. Olson.2005. UAV Ice Protection Systems (37 slides). Starkville, MS.

———. 2005. Ultra Light UAV Ice Protection System – Engineering Study: RASPET/MSU.

Papadakis, M., and M. Bridgeford. 2005. Ultra Light UAV Ice Protection System – System Design (24 slides). Starkville, MS.

Papadakis, M., and R. Olson. 2005. Ultra Light UAV Ice Protection System (18 slides). Starkville, MS. Papadakis, M. 2005. Walter H. Beech Memorial Wind Tunnel Upgrade and Modernization Highlights (18 slides). Cleveland, OH.

Pednekar, V., V. Madhavan, and A. H. Adibi-Sedeh2005. Numerical investigation of heat partition in the primary shear zone in metal cutting. Paper read at ASME International Mechanical

Engineering Conference and Exposition, at Orlando, FL.

Ponnappan, R., and T. S. Ravigururajan. 2004. Temperature and Pressure effects on Thermal conductance J. Power Sources (129):7-13.

Raju, K. S., and E. Dan-Jumbo 2005. Behavior of Single-Shear Double Fastener Joints under Fatigue Loading. Paper read at Sampe Technical Conference, at Seattle, WA.

Raju, K. S., H. Lankarani, and J.F. Acosta. 2005. Crashworthiness of Composites – material Dynamic properties. Wichita State University.

Raju, K. S., and J. S. Tomblin. 2005. Damage Tolerance of Sandwich. Wichita State University.

Raju, K. S., B. Kumar, A. Kolachalamma, and A. J. Buhrman. 2005. NIS 05-003 Blind-fastener Applications in Composite Structures: NIAR/Industry/State of Kansas ( NIS).

Raju, K. S., H. Lankarani, P.Sriram, and J. F. Acosta. 2005. NIS 05-006 Crashworthiness of Composite Fuselage Structures: NIAR/Industry/State of Kansas ( NIS).

Raju, K. S., J.S. Tomblin, and K. W. Petzold. 2005. Responses of Sandwich panels with Large notches.

Paper read at American Society for Composites – 20th Technical Conference, at Drexel University, PA.

Raman, V., and K. R. Namuduri . 2005. Combined Source-Channel Diversity Schemes for Video

Transmission. Paper read at IEEE International Conference on Communications, at Korea. Rokhsaz, K., L. K. Kliment, and T. S. Miller. 2005. Experimental Investigation of the Dynamic Interactions between Co-Rotating Wing/Flap Tip Vortices 2004 SAE Aerospace Transactions:1585-1546.

Rokhsaz, K., and L. K. Kliment. 2005. Feasibility of Modeling Wake Vortices in Ground Effect in a Water Tunnel. Paper read at SAE World Aviation Congress, at Grapevine, TX.

Rokhsaz, K., J. Steck, R. Chandramohan, and B. Singh. 2005. Response of an Advanced Flight Control System to Microburst Encounters. Paper read at SAE Aero Tech World Aviation Congress, at

Dallas/Ft Worth, TX.

Rokhsaz, K., J. E. Steck, R. Chandramohan, and B. Singh. 2005. Response of an Advanced Flight Control System to Microburst Encounters. Paper read at SAE World Aviation Congress, at

Grapevine, TX.

Sabirov, I., and I. Ahmed. 2005. Inverse calculation of Plasma Jet Impingement Heat Transfer. Paper read at Joint National Heat Transfer /Fluids Engineering Conference, at Charlotte, NC. Scarlett, D, L. Io, M. Bohan, B. Chaparro, and M. J. Jorgensen. 2005. Psychophysical comparison of five mouse designs. Paper read at Human Computer Interaction International, at Las Vegas, NV. Schmidlin, T., B. Hammer, P. King, L. S. Miller, G. Thumann, and H. Wetherington 2005. Critical Wind Speeds to Upset Two Styles of Ambulances and a Large City Bus. Journal of Emergency

Management 3 (2):5.

Sen, S., J. Twomey, and J. Ahmad. 2005. ANN constitutive model for high strain-rate deformation of Al 7075. Paper read at NAMRI/SME.

Sen Sanjeev, Janet Twomey, and Jamal Sheikh-Ahmad. 2005. ANN Constitutive Model for High Strain-Rate Deformation of Al 7075-T6. Paper read at North American Manufacturing Research Institute Conference, at New York.

Shariff, Y., and T. S. Ravigururajan. 2005. Enhanced Refrigerant Mixture Flows in Meso-channels Using Micro-coils. Paper read at ISHMT-ASME Int’l Conf. Heat and Mass Transfer at Kalpakkam, India. Shariff, Y., and T.S. Ravigururajan. 2005. Single and boiling correlations for wire-coil inserts in minichannels. Paper read at International Mech. Eng. Conf & Expo, at Anaheim, CA.

Sheikh-Ahmad, J., and R. Yadav. 2005. Force prediction in milling of carbon fiber reinforced polymers.

Paper read at Proc. ASME International Mechanical Engineering Congress and Exposition, at

Orlando, Florida.

Shim, K. H., and M. E. Sawan. 2005. Approximate Controller Design for Singularly Perturbed Aircraft System Aircraft Engineering and Aerospace Technology 77 (4):311-316.

Shim, K. H., and M. E. Sawan. 2005. Singularly Perturbed Unified Systems with Low Sensitivity to Model Reduction. Paper read at American Control Conference, at Portland, Oregon.

Siginer, D.A., and M. F. Letelier. 2004. On the Fully Developed Tube Flow of a Class of Nonlinear Viscoelastic Fluids. International Journal of Non-Linear Mechanics. International Journal of Non-

Linear Mechanics 40 (4):485-493.

Siginer, D. A. 2004. On the Nearly Viscometric Torsional Motion of Viscoelastic Liquids Between Shrouded Rotating Discs J ournal of Applied Mechanics 71 (3):305-313.

———. 2005. Plenary Lecture:Heat Transfer with Viscoelastic Fluids in Laminar Flow. Paper read at International Conference on Thermal Engineering Theory and Applications, at Beirut, Lebanon. Skinner, Steven R. 2005. Effective Teaching. Wichita, KS.

Skinner, S. R., and K. Khan. 2005. Wiring Assessment of Commuter Class Aircraft. Paper read at 8th Joint DoD/FAA/NASA Conference on Aging Aircraft, at Palm Springs, CA.

Smith, B. L., T. L. Z. Flores, and A. L. Hijazi. 2005. Link-Up Strength of 2524-T3 and 2024-T3 Aluminum Panels with Multiple site Damage. AIAA Journal of Aircraft 42 (2).

Soschinske, K. 2004. Industry-Based Training in Mechanical Engineering Senior Design Courses. Paper read at Integrating Practice into Engineering Education, at University of Michigan - Dearborn. Steck, J., K. Rokhsaz, U. J. Pesonen, B. Singh, and R. Chandramohan. 2005. Effect of Turbulence on an Adaptive Dynamic Inverse Flight Controller. Paper read at AIAA Infotech @Aerospace, at

Crystal City, VA.

Steck, J. E., Rokhsaz, K., Pesonen, U. J., and Duerksen, N. 2005. An Advanced Flight Control System for General Aviation Application 2004 SAE Aerospace Transactions (SAE 2004-01-1807):27-36. Steck, J. E., K. Rokhsaz, U. J. Pesonen, B. Singh, and R. Chandramohan. 2005. Effect of Turbulence, Microburst and Windshear on an Adaptive Dynamic Inverse Flight Controller. Paper read at AIAA Infotech@Aerospace, at Arlington, VA.

Sudhanshu, John, and Hyuck M. Kwon . 2005. Approximate Cycle Extrinsic Message Degree Regular Quasi-Circulant LDPC Codes. Paper read at IEEE Military Communications Conference, at Atlantic City, New Jersey.

Sudhanshu, John, Ashutosh Goyal, and Hyuck M. Kwon. 2005. Complexity Reduction via Convergence of the SUM-Product Algorithm for LDPC under Fading Channels. Paper read at

National Radio Science Meeting, at University of Colorado at Boulder.

Sudheer, J. K., and K. R. Namuduri. 2005. A Practical Approach for Evaluating the Capacity of

Watermarking Channel. Paper read at Second International Conference of Intelligent Sensing and Information Processing, at India.

Tan, C., and M. Papadakis. 2005. Development of a Reference Total Liquid Water Content Probe (28 slides). Cleveland, OH.

———. 2005. Droplet Breakup, Splashing and Re-Impingement on An Iced Airfoil. Paper read at 4th AIAA Theoretical Fluid Mechanics Meeting, at Toronto, Canada.

———. 2005. A Prototype Probe for Direct Measurement of the LWC in SLD Clouds. Paper read at SAE AeroTech Congress and Exhibition, at Dallas/Ft. Worth, TX.

———. 2005. Spray Nozzle Characteristics and Performance Evaluation (10 slides). Cleveland, OH. Tan, C., and M. Papadakis. 2005. Test Methods and Visualization Tools for Large Droplet Dynamics Experiments (18 slides). Chicago, IL.

Tan, C. and M. Papadakis. 2005. Droplet Splashing on Ice Shapes (14 slides). Cleveland, OH.

Tan, C. S., M. Papadakis, S. C. Wong, and D. Regnier 2005. Simulated Icing Tests Nozzle Design and Feasibility Study: NIS.

Tan, J., M. Papadakis, and D. Miller. 2005. Large Droplet Impingement Dynamics Experiments in the NASA DrIFT Facility NASA.

Tangirala, K. V., and K. R. Namuduri. 2005. Object Tracking in Video Using Particle Filtering Paper read at IEEE ICASSP, at Philadelphia, PA.

———. 2005. Object Tracking in Video Using Particle Filtering Paper read at IEEE ICASSP, at Philadelphia, PA.

Tayem, Nizar, Hyuck M. Kwon, and Yong H. Lee. 2005. 2-D DOA Estimation with No Failure. Paper read at IEEE Vehicular Technology Conference, at Dallas, TX.

Tayem, Nizar, and Hyuck M. Kwon. 2005. 2-D DOA Estimation with Propagator Method for Correlated Sources under Unknown Symmetric Toeplitz Noise. Paper read at IEEE Vehicular Technology

Conference, at Stockholm, Sweden.

Tayem, Nizar, and Hyuck M. Kwon. 2005. Angle Estimation with Propagator Method for Correlated Sources under Unknown Symmetric Toeplitz Noise. Paper read at 18th Annual Canadian

Conference on Electrical and Computer Engineering, at Saskatoon, Saskatchewan, Canada. Tayem, Nizar, and Hyuck M. Kwon 2005. Arrival Angle Estimation of Correlated Sources under Unknown Noise of Hermitian Covariance Matrix. Paper read at IEEE AP-S International

Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, at

Washington, DC.

Tayem, Nizar, Hyuck M. Kwon, and Yong H. Lee. 2005. DOA Estimation for Coherent Sources with Spatial Smoothing without Eigendecomposition under Unknown Noise Field. Paper read at IEEE

GLOBECOM Conference, at St Louis, MO.

Tayem, Nizar, Hyuck M. Kwon, Seunghyun Min, and Donghee Kang. 2005. FOA and 2-D DOA Estimation with Propagator Method. Paper read at EEE Vehicular Technology Conference, at Dallas, TX. Tayem, Nizar, and Hyuck M. Kwon. 2005. L-Shape 2-Dimensional Arrival Angle Estimation with Propagator Method IEEE Transactions on Antennas and Propagation 53 (5):1622-1630. ———. 2005. L-Shape 2-Dimmensional Arrival Angle Estimation with Propagator Method. Paper read at IEEE Vehicular Technology Conference, at Stockholm, Sweden.

Tayem, Nizar, Raja Balakrishnan, and Hyuck M. Kwon.2005. Smart Antenna for Future US Army Frequency-Hopping Communications Systems: US Army – DEPSCoR.

Tayem, Nizar, and Hyuck M. Kwon.2005. Transform Covariance Differencing Method for Correlated Sources under Unknown Symmetric Toeplitz Noise. Paper read at IEEE Military Communications Conference, at Atlantic City, New Jersey.

Tayem, Nizar and Hyuck M. Kwon. 2005. Arrival Angle Estimation of Correlated Sources with Unknown, Spatially Uncorrelated and Nonstationary Noise. Paper read at IEEE AP-S International

Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, at

Washington, DC.

Vannatta, N., B. Smith, and B. Kumar. 2005. Comparison of Experimental Crack Growth Data with Analytical Results: NIS.

Wang, X. P., M. Ottavi, F. J. Meyer, and F. Lombardi. 2005. Estimating the Manufacturing Yield of

Compiler-Based Embedded SRAMs IEEE Transactions on Semiconductor Manufacturing 18

(3):412-421.

Wang, X. P., Mehler, J. N., F. J. Meyer, and N. Park.2005. Memory Yield and Complexity of Built-in Self-Repair. Paper read at IEEE Reliability and Maintainability Symposium, at Washington, DC. Warner, Joe, Ward Jewell, and James McCalley 2005. PREDICTING RECLOSER FAILURE RATES FROM FIELD CONDITION ASSESSMENT. Paper read at Frontiers of Power, at Oklahoma State Univ. Watkins, J. 2005. A Virtual Implementation of a Dynamic Signal Analyzer using SIMULINK. Paper read at ASEE Annual Conference and Exposition at Portland, OR.

Wentz, W., R. Myose, A. Mohamed. 2005. Hydrogen-Fueled General Aviation Airplanes. Paper read at 5th AIAA ATIO Conference, at Crystal City, VA.

Whitman, and Santanu. 2005. Enterprise model repository. Paper read at IFAC World Congress Praha 2005, at Prague, Czech Republic.

Whitman, Malzahn, Chaparro, Russell, Langrall, Mohler. 2005. A Comparison of Group Process4es, Performance, and Satisfaction in a Face-to-Face Versus Computer-Mediated Engineering Student Design Teams. Journal of Engineering Education:327-333.

Yang, C., W. Seneviratne, and W. Sun. 2004. Development of Design Philosophies for Large Bonded and Fastened Assemblies Containing Metals and Composites with Large CTE Difference: State of

Kansas.

Yang, C, . W. Seneviratne, and W. Sun. 2005. Design Philosophies for Structures Utilizing Metal and Composites with Large CTE Differences. In Project Review Meeting with Local Industrial Partners. Ycddanapudi, S. R. K., Li Yuan, J. McCalley, A. A. Chowdhury, and W. T. Jewell 2005. Development of a predictive reliability assessment tool for distribution systems. Paper read at 37th Annual

North American Power Symposium, at Iowa State University.

Yildirim, M. B., and D. W. Hearn.2005. A First Best Toll Pricing Framework for Variable Demand Traffic Assignment Problems. Transportation Research-B 39:659-678.

You, Kumar, Young, Veluswamy, Malzahn. 2005. An ergonomic evaluation of manual Cleco pliers design: Effects of rubber grip, spring recoil, and worksurface angle. Applied Ergonomics (36):575-583. Z. D. Patitz, N. Park, M. Choi, and F. J. Meyer. 2005. QCA-Based Majority Gate Design Under Radius of Effect-Induced Faults. Paper read at IEEE International Symposium on Defect and Fault

Tolerance in VLSI Systems, at Monterey, CA.

Zhao, J. F., J. Meyer, N. Park, and F. Lombardi. 2004. Sequential Diagnosis of Processor Array Systems IEEE Transactions on Reliability 53 (4):487-498.

Zhao, W., and V. Madhavan.2005. Integration of voice commands into a virtual reality environment for assembly design. Paper read at 10th IJIE Conference, at Clearwater, FL.

Fairmount College of Liberal Arts and Sciences

Department of Anthropology (30)

Billings, Dorothy 2005. The Johnson Cult. Fortean Time: The World of Strange Phenomena. Blakeslee, Don 2005. Central Plains Earthlodges as the Products of Craft Specialists. In Earthlodges: Architecture and Symbolism, edited by D. C. R. a. E. P. Paulus. Tuscaloosa: University of Alabama Press.

Blakeslee, Donald. J., and Frank Gagne. 2005. Phase III Testing of Site 14CO1310, Cowley County, Kansas. Appendix D. In Phase III-IV Archaeological Data Recovery Invesstigations at Site

14CO1310, Cowley County, Kansas, edited by I. Louis Berger Group. Marion,IA.

Brady, James, and Keith M. Prufer. 2005. Maya Cave Archaeology: A New Look at Religion and Cosmology. In Stone Houses and Earth Lords: Reconstructing Maya Religion in the Cave Context Brady, James E., and Keith M.Prufer. 2005. Introduction: A History of Mesoamerican Cave Interpretation. In In The Maw of the Earth Monster: Studies of Mesoamerican Ritual Cave Use. ———, ed. 2005. The Maw of the Earth Monster: Studies of Mesoamerican Ritual Cave Use: University of Texas Press.

Campbell, Meadow, and Peer H. Moore-Jansen. 2005. Morphological Variation and Sexual Dimorphism in the Skeletal Elelments of the Human Elbow. Paper read at 1st Annual Graduate Research And Scholarly Projects Symposium, at WSU.

Hughes, David. 2005. Archaeological Investigations for the elk River I Wind Generation Facility. Buttler County, Kansas: Report filed with the Kansas State Historical Society.

———. 2005. Archaeological Survey of the Proposed El Dorado Wastrewater Treatment plants: Report filed with the Kansas State Historical Society and the City of El Dorado, Kansas.

Lawless, Robert 2005. Bibliography of Foraging Peoples.

Lawless, Robert. . 2005. Phillipine Diaspora. Encyclopaediae of Diasporas:244-253.

Lawless, Robert. 2005. Review of African Vodun: Blier.

———. 2005. Review of Arctic Migrants/Arctic Villagers.

———. 2005. Review of Asian Voyagers: Dathorne.

———. 2005. Review of Catechizing Culture.

———. 2005. Review of New Terrains in Southeast Asian History. Journal of Third World Studies 22

(2):251-252.

Lawless, Robert. . 2005. Review of This Land is Our Land: Stepick, Grenier, Castro, Dunn.

Lawless, Robert. 2005. Review of Unwrapping the Sacred Bundle: Segal and Yanagisako.

———. 2005. Review of What Place for Hunter-Gatherers in Milleneium Three?

Morehart, Christopher, David Lentz, and Keith M. Prufer. 2005. Wood of the Gods: The Ritual Use of Pine (Pinus sp.) by the Ancient Lowland Maya. Latin American Antiquity 16 (3).

Prufer, Keith. 2005. Test Bank. In 4-Fields of Anthropology textbook, edited by A. Bacon: Pearson Publishing.

Prufer, Keith M., and James E. Brady. 2005. Concluding Comments. In The Maw of the Earth Monster: Studies of Mesoamerican Ritual Cave Use.

Prufer, Keith M. . 2005. The Early Classic in Southern Belize: A Regional View from Uxbenká and Ek Xux.

In Papers of the 2004 Belize Archaeology Symposium: Archaeological Investigations in the

Eastern Lowlands, edited by J. Awe. Belmopan Belize: Institute of Archaeology.

Prufer, Keith M., and James E. Brady. 2005. Introduction: Religion and the Role of Caves in Lowland Maya Archaeology In Stone Houses and Earth Lords: Reconstructing Maya Religion in the Cave

Context.

Prufer, Keith M., and Andrew Kindon. 2005. Replicating the Sacred Landscape: The Ch’een at Muklebal Tzul. Stone Houses and Earth Lords: Reconstructing Maya Religion in the Cave Context. Prufer, Keith M. 2005. Shamans, Caves, and the Roles of Ritual Specialists in Maya Society. In The Maw

of the Earth Monster: Studies of Mesoamerican Ritual Cave Use.

Prufer, Keith M., and James E. Brady., ed. 2005. Stone Houses and Earth Lords: Maya Ritual in the Cave Context: University Press of Colorado.

Prufer, Keith M. 2005. The Uxbenká Archaeological Project: Foundation for the Advancement of Mesoamerican Studies, Inc.

Robarchek, Clayton. 2005. Waorani Grief and the Witch-Killer’s Rage. Ethos 33 (2).

Saul, Julie, Keith M. Prufer, and Frank Saul 2005. Nearer to the Gods? Rockshelter Burials From the Ek Xux Valley, Belize. In Stone Houses and Earth Lords: Reconstructing Maya Religion in the Cave

Context

Department of Biological Sciences (6)

Harvey, D. J., and G. R. Bousfield 2005. Differentiation between sulphated and phosphated carbohydrates in low resolution MALDI mass spectra. Rapid Communications in Mass

Spectrometry (19):287-288.

Louda, S. M., T. A. Rand, F. L. Russell, and A. E. Arnett. Assessment of ecological risk in weed biocontrol: input from retrospective ecological analyses. Biological Control 35:253-264, 2005.

2005. Assessment of ecological risk in weed biocontrol: input from retrospective ecological

analyses. Biological Control (35):253-264.

Rogers, C. M. 2005. Food limitation among wintering birds: A view from adaptive body mass models.

Birds of Two Worlds: The ecology and evolution of bird migration. :106-114.

Russell, F. L. and Louda, S. M. . 2005. Indirect interaction between two native thistles mediated by an invasive, exotic floral herbivore. Oecologia (146):373-384.

Schneegurt, M. A. . 2005. δ-Aminolevulinic acid biosynthesis in Ustilago maydis. J. Basic Microbiol

(45):155-159.

Surendran, S., A. O. Okorodudu, G. A. Campbell, S. K. Tyring, K. Michals-Matalon, J. D. McDonald, and R. Matalon. 2005. Abnormal Expression of Genes Associated with Development and Inflammation in the Heart of Mouse Maternal Phenylketonuria Offspring. International Journal of

Immunopathology and Pharmacology 18:557-565.

Department of Chemistry (36)

Bhakta, M., P. F. Hollenberg, and K. Wimalasena 2005. Evidence for a Hydrogen Abstraction Mechanism in P450-Catalyzed N-Dealkylations. Chem. Commun.:265-267.

Bhakta, M., and K. Wimalasena. 2005. A Mechanistic Comparison between P450- and

Chloroperoxidase-Catalyzed N-Dealkylation of N, N-dialkyl Anilines Eu. J. Org. Chem:4801-4805. Bhakta, M., P. F. Hollenberg, and K. Wimalasena. 2005. P450/NADPH/O2- and P450/PHIO-Catalyzed N-dealkylations are Mechanistically Distinct. J. Am. Chem. Soc. (127):1376-1377.

Burns, Dennis H., and W. Robert Carper. 2005. Anion Recognition in a Model Ion Channel: Effects of Solvation on Chloride Binding to a Porphyrin-metacyclophane. Journal of Molecular Structure

(THEOCHEM) (711):149-157.

Burns, D.H., K. Calderon-Kawasaki, and S. Kularatne. 2005. Buried Solvent Determines Anion Binding Selectivity with Hydrogen Bonding Receptors. J. Org Chem. (70):2803-2807.

Cooper, Travis J., Erach R. Talaty, and Michael J. Van Stipdonk. 2005. Novel Fragmentation Pathway for CID of (bn-1+Cat)+ Ions from Model Metal Cationized Peptides. J. Amer. Soc. of Mass Spectrom

16 (1305).

Cooper, T. J., E. R. Talaty, and M. J. Van Stipdonk. 2005. Novel Fragmentation Pathway for CID of (bn-1+Cat)+ Ions From Model, Metal Cationized Peptides. J. Am. Soc. Mass Spectrom (15):1305-

1310.

D’Souza, F., R. Chitta, S. Gadde, M. E. Zandler, A. L. McCarty, A. S. D. Sandanayaka, Y. Araki, and O.

Ito. 2005. Effect of Axial Ligation or p-p Interactions on the Photochemical Charge Stabilization in

the ‘Two-point’ Bound Supramolecular Porphyrin Fullerene Conjugates. Chem. Eur. J 11 (4416). D’Souza, F., R. Chitta, S. Gadde, M. E.Zandler, A .L. McCarty, A. S. D. Sandanayaka, Y. Araki, and O.

Ito. . 2005. Effect of Axial Ligation or p-p Interactions on the Photochemical Charge Stabilization in the ‘Two-point’ Bound Supramolecular Porphyrin Fullerene Conjugates. Chem. Eur. J 11

(4416).

D’Souza, F., L. M. Rogers, E. S. O’Dell, A. Kochman, and W. Kutner. 2005. Immobilization and Electrochemical Redox Behavior of Cytochrome c on the Fullerene Film Modified Electrodes.

Bioelectrochem (66):35-40.

D’Souza, F., El-Khouly, S. Gadde, A. L. McCarty, P. A. Karr, M. E. Zandler, Y. Araki, and O. Ito. 2005. A Self-Assembled via Axial Coordination Magnesium Porphyrin-Imidazole Appended Fullerene Dyad: Spectroscopic, Electrochemical, Computational and Photochemical Studies. J. Phys. Chem

(109):1017.

———. 2005. A Self-Assembled via Axial Coordination Magnesium Porphyrin-Imidazole Appended Fullerene Dyad: Spectroscopic, Electrochemical, Computational and Photochemical Studies. J.

Phys. Chem 10107.

D’Souza, F., R. Chitta, S. Gadde, M. E. Zandler, A.S.D. Sandanayaka, Y. Araki, and O. Ito. . 2005.

Supramolecular Porphyrin-Fullerene via ‘Two-Point’ Binding Strategy: Axial-Coordination and

Cation-Crown Ether Complexation. Chem. Commun:1279-1282.

D’Souza, F., R. Chitta, S. Gadde, M. E. Zandler, A. S. D. Sandanayaka, Y. Araki, and O. Ito. 2005.

Supramolecular Porphyrin-Fullerene via ‘Two-Point’ Binding Strategy: Axial-Coordination and

Cation-Crown Ether Complexation. Chem. Commun:1279-1282.

D’Souza, F., S. Gadde, El-Khouly, M. E. Zandler, Y. Araki, and O. Ito 2005. A Supramolecular Star Wars Tie Fighter Ship: Electron Transfer in a Self-Assembled Triad Composed of Two Zinc

Naphthalocyanines and a Fullerene. J. Porphyrins Phthalocyanines.

D’Souza, F., and O. Ito. 2005 Photoinduced Electron Transfer in Supramolecular Systems of Fullerenes Functionalized with Ligands Capable of Binding Zinc Porphyrins and Zinc Phthalocyanines. Coord.

Chem 249 (1410).

Eichler, J.F., J.C. Cramer, K.L. Kirk, and J.G. Bann. 2005. Biosynthetic Incorporation of Fluorohistidine into Proteins in E.coli: A New Probe of Macromolecular Structure. ChemBioChem (6):1-4.

El-Khouly, M. E., Y. Araki, O. Ito, S. Gadde, A.L. McCarty, P.A. Karr, M.E. Zandler, and F. D’Souza. 2005.

Synthesis and Electron Transfer Reactions of a Magnesium Porphyrin-Fullerene Dyad.

PhysChemPhysChem (7):3163.

———. 2005. Synthesis and Electron Transfer Reactions of a Magnesium Porphyrin-Fullerene Dyad.

PhysChemPhysChem. 7 (3163).

Gadde, S., D.R. Powell, M. E. Zandler, and F.D’Souza. 2005. X-ray Structural and DFT Computational Studies of a Self- Assembled via Axial Coordination Magnesium Porphyrin-Fullerene Conjugate. J.

Porphyrins Phthalocyanines.

Heimer, Norman E., John. S. Wilkes, Phillip G. Wahlbeck, and W. Robert Carper 2005. 13C NMR Relaxation Rates in the ionic liquid 1-ethyl-3-methylimidazolium Butanesulfonate. Journal of

Physical Chemistry A (110):868-874.

Heimer, Norman E., Rico E. Del Sesto, Zhizhong Meng, John S. Wilkes, and W. Robert Carper. 2006.

Vibrational spectra of imidazolium tetrafluoroborate ionic liquids. Journal of Molecular Liquids

(124):84-95.

Hill, J.P., W. Schmitt, A.L. McCarty, K. Ariga, and F. D’Souza. 2005. Structures, Spectral and Electrochemical Properties of N-(2-Methylenenaphthyl)-Appended Porphyrinogens. Eur. J. Org.

Chem (2893).

Justice, S.S., D.A. Hunstand, J.R. Harper, A.R. Duguay, J.S. Pinkner, J. Bann, C. Frieden, T.J. Silhavy, and S.J. Hultgren. 2005. Periplasmic prolyl cis-trans isomerases are not essential for viability, but SurA is required for pilus biogenesis in Escherichia coli. J. Bacteriology (187):7680-7686. Kutner, W., P. Pieta, R. Nowakowski, J. W. Sobczak, Z. Kaszkur, A. L. McCarty, and F.D’Souza. 2005.

Composition, Structure, Surface Topography and Electrochemical Properties of Electrophoretically Deposited Nanostructured Fullerene Films. Chem. Mater (17):5635.

Kutner, W., P. Pieta, R. Nowakowski, J.W. Sobczak, Z. Kaszkur, A.L. McCarty, and F.D’Souza. 2005.

Preparation, Surface Characterization and Electrochemical Properties of Electrophoretically

Deposited C60 Films. Paper read at XIX International Winterschool/Euroconference on Electronic Properties of Novel Materials.

Olabisi, A. O., M. P. Mahindaratne, and K. Wimalasena. 2005. A Convenient Entry to C2- and C3-Substituted Gulono-gamma-lactone Derivatives from l-Ascorbic Acid. J. Org. Chem (70):6782-9. Stoyanov, S. R., J. M. Villegas, A. J. Cruz, L. L. Lockyear, J. Riebenspies, and D. P. Rillema. 2005.

Computational and Spectroscopic Studies of Re(I) Bipyridyl Complexes Containing 2,6-

dimethylphenylisocyanide (CNx) Ligand. J. Chem. Theory Comput. (1):95-106.

Villegas, J. M., S. R. Stoyanov, C. Moore, D. M. Eichhorn, and D. Paul Rillema 2005. fac-2, 9-Dimethyl-1,10-phenanthroline-tricarbonyl (2,6-dimethylphenylisocyanido) rhenium(I) Hexafluorophosphate.

Acta Cryst. E (61):m533-m534.

Villegas, J. M., S. R. Stoyanov, W. Huang, and D. P. Rillema 2005. Photophysical, Spectroscopic and Computational Studies of a Series of Re(I) Tricarbonyl Complexes Containing 2,6-

Dimethylphenylisocyanide and 5- and 6-Derivatized 1,10-Phenanthroline Ligands. Inorg. Chem

(44):2297-2309.

Villegas, J.M., S. R. Stoyanov, W. Huang, and D. P. Rillema. 2005. Photophysical, Spectroscopic and Computational Studies of a Series of Re(I) Tricarbonyl Complexes Containing 2,6-

Dimethylphenylisocyanide and 5- and 6-Derivatized 1,10-Phenanthroline Ligands. Inorg. Chem

(44):2297-2309.

Villegas, J. M., S. R. Stoyanov, J. Riebenspies, and D. P. Rillema 2005. Spectroscopic and Computational Investigations of the Temperature-Dependent Emission Behavior of [Re(CNx)5Cl] and

[Re(CNx)6]+ Complexes. Organometallics ( 24):395-404.

Villegas, J. M, S. R. Stoyanov, C. E. Moore, D. M. Eichhorn, and D. P. Rillema. 2005. Tricarbonyl(2,9-dimethyl-1,10-phenanthroline)(2,6-dimethylphenyl-isocyanide)rhenium(I) hexafluorophosphate.

Acta Cryst (E61):m533-m534. .

Villegas, J. M. S. R. Stoyanov, W. Huang, and D. P. Rillema 2005. A Spectroscopic and Computational Study of the Effects of Methyl and Phenyl Substituted Phenanthroline Ligands on the

Photochemical Properties of Re(I) Tricarbonyl Complexes Containing 2,6-

Dimethylphenylisocyanide. Dalton Trans:1062 – 1071.

Wong, T., C.S. Groutas, S. Mohan, Z. Lai, K.R. Alliston, N.M. Schechter , and W.C. Groutas 2005. 1, 2, 5 -Thiadiazolidin-3-one 1, 1 Dioxide-Based Heterocyclic

Sulfides as Potent Inhibitors of Human Tryptase. Archives of Biochemistry 436:1-7.

Zhao, N., and D. M.Eichhorn. 2005. Dichlorobis(3,5-dimethylpyrazole)copper(II). Acta Cryst (E61):m822-m823.

Department of Community Affairs (8)

Bannister, Andra. 2005. Agroterrorism Training for Law Enforcement, edited by U. S. D. o. Justice. Birzer, M. L., and C. Roberson. 2007. Policing, Today and Tomorrow. Saddle River, NJ: Prentice Hall Publishing.

Cromwell, Paul, Leanne Alarid, and Rolando del Carmen. 2005. Community-Based Corrections 6th Edition: Wadsworth Publishing Company.

Cromwell, Paul, and Leanne Alarid ed. 2005. In Her Own Words: Women Offender’s Perspectives on Crime and Criminal Justice: Roxbury Publishing Company.

Cromwell, Paul ed. 2005. In Their Own Words: Criminals on Crime, 4th Edition: Roxbury Publishing Company.

Palmiotto, Michael. 2005. 2005. Law Enforcement and Society, 2nd.

Palmiotto, Michael. 2005. Policing: Concepts and Strategies. 2nd. Ed: Carolina Academic Press.

Smith, Martha J. . 2005. Robbery of Taxi Drivers. Problem-Oriented Policing Guide, edited by C. O. U.S.

Department of Justice.

Department of Computer Science (6)

Bates, R. . 2005. Distinguishing Redundant Parentheses by Syntax. International Journal of Computer Mathematics 28:951-957.

Chou, S.-C., X.S. Gao, and Z. Ye. . 2005. Java Geometry Expert. Paper read at Proceedings of the 10th Asian Technology Conference in Mathematics.

Prabhakar, S. . 2005. Autonomous Agents as Adaptive Perceptual Interfaces. Paper read at AAAI Spring Symposium on Persistent Assistants: Living and Working with AI.

———. 2005. Learning to Support another Learner. Paper read at 18th International Florida Artificial Intelligence Research Society Conference (FLAIRS).

Ramanan, P. . 2005. Evaluating an XPath Query on a Streaming XML Document. Paper read at 12th Intl.

Conf. on Management of Data (COMAD).

Tang, M., S.-C. Chou, and J.X. Dong. 2005. Concurrency Conflicts Solving for Collaborative Feature Modeling. Paper read at 9th International Conference on Computer Supported Cooperative Work Design.

Elliott School of Communication (22)

Anderson, Les, and Fred Mann 2005. BTK IS ARRESTED: Liked by many, loathed by some. The Wichita Eagle.

Anderson, Les. 2005. Various titles. The Ark Valley News.

———. 2005. Why don’t teens value free speech? The Wichita Eagle.

Armstrong, Rick. 2005. Televangelism. In Encyclopedia of Religion, Communication and Media. Boyle, Mike, M. Schmierbach, D. M. McLeod. 2005. Civic Attachment in the Aftermath of September 11.

Mass Communication & Society.

Boyle, Mike, J. Cho, M. R. McLeod, D. M., and D. V. Shah. 2005. Expressive Responses to News Stories About Extremist Groups: A Framing Experiment. Journal of Communication.

Boyle, Mike, M. R. McCluskey, D. M. McLeod, S. E. Stein. 2005. Newspapers and Social Protest: An Examination of Newspaper Coverage of Social Protest from 1960-1999. Journalism & Mass

Communication Quarterly.

Close, Dan. 2005. BTK is Punished; Now Life Goes On. The Wichita Eagle.

———. 2005. If BTK Likes Series, He Isn’t the First. The Wichita Eagle.

———. 2005. Thinking of Two Wheels: Getting Off The Fast Lane. Shocker Magazine.

Dooley, Pat. 2005. Beyond the Ivory Tower: The Contributions of Kathleen Hall Jamieson. Journal of Broadcasting and Electronic Media.

Huxman, Susan. 2005. Passing the Torch for Woman’s Rights: Elizabeth Cady Stanton, Anna Howard Shaw, and Carrie Chapman Catt. A Rhetorical History of the United States 5.

Iorio, S. H., L. Anderson, and L. Blythe. 2005. Experiential Learning for Research and Reporting Classes through a Comprehensive Newsroom Project. In Association for Journalism and Mass

Communication. San Antonio, TX.

Iorio, S. H. . 2005. Re-imagining Junction City: A Civic Journalism Survey and Focus-group Research Report. Junction City: The (Junction City, KS) Daily Union.

Jarman, Jeff. 2005. Annual Discussion and Debate Sourcebook. Forensic Quarterly.

———. 2005. Annual Discussion and Debate Sourcebook. Forensic Quarterly.

———. 2005. Cheap Talk About Drugs or Talk About Cheap Drugs? Public Sphere Deliberations on a Prescription Drug Benefit. Critical Problems in Argumentation.

———. 2005. Legal ethics, rhetoric and argument in the case of Kobe Bryant. Paper read at AFA/NCA Conference Proceeding on Argumentation.

———. 2005. Political Affiliation and Presidential Debates: A Real-Time Analysis of the Effects of the Arguments used in Presidential Debates. American Behavioral Scientist.

———. 2005. Review of Fatherhood Politics in the United State: Masculinity, Sexuality, Race and Marriage. Argumentation and Advocacy.

Rick Armstrong, James Hallmark, and L. Keith Williamson. 2005. Televangelism as Institutional

建设创新型省份工作指引

建设创新型省份工作指引 为仔细贯彻落实《国家创新驱动发展战略纲要》提出的打造区域创新示范引领高地，建设创新型省份和创新型城市等战略要求，充分发挥地方实施创新驱动发展战略的主体作用，加快推进创新型省份建设，支撑年进入创新型国家行列和全面建成小康社会，提出本工作指引。 一、总体要求 创新型省份是对建设创新型国家发挥显著支撑作用的有关省份。科技创新成为区域的重要战略资源，成为产业转型和综合实力的主要支撑，成为促进经济发展和民生改善的重要手段，成为政策制定与制度安排的核心要素，成为参与全球竞争合作的关键内容。能够吸引培养国际一流的科学家和高端创新人才，培育集聚具有国际影响力的高科技创新型企业和持续竞争力的科技型中小微企业，形成支持大众创业、万众创新的政策环境，形成尊 1 / 17

重知识、尊重人才、尊重创新的社会氛围。 建设创新型省份是加快实施创新驱动发展战略，年进入创新型国家行列的必然要求；是培育发展新动力，引领经济发展新常态的内在需要；是贯彻落实国家区域发展总体战略，推动区域协调发展的重要支撑。 （一）指导思想。 坚持创新、协调、绿色、开放、共享发展理念，坚持创新是引领发展的第一动力，以实施创新驱动发展战略为主线，以改革为动力，以产业创新发展为战略主攻方向，发挥地方主体作用和特色优势，将建设创新型省份作为地方各级党委、政府推动创新发展的旗帜性抓手，着力增强自主创新能力，着力构建各具特色的区域创新载体，着力加强创新人才队伍建设，着力营造创新创业良好生态，打造若干区域创新高地和发展引擎，为实现年全面建成小康社会、进入创新型国家行列目标提供有力支撑。 （二）建设原则。

创新创业训练营总结

为大力推进建设创新型大学步伐，营造浓厚的校园创新创业氛围，中南大学公共管理学院秉着“崇尚科学，追求真知，锐意创新，迎接挑战的宗旨，以培养学生创新精神和实践能力为目标，在成立至今短短的三年时间里，通过不断组织学生参加创新创业讲座、报告等系列活动，对创新创业活动项目进行自己资助等方式，鼓励了一大批本科学生积极投身创新创业活动中去。 一、规范日常管理，完善队伍建设，鼓励大学生投身创新创业活动为鼓励大学生投身创新创业活动，我院在成立之初便建立了《公共管理学院大学生创新创业制度细则》（见附件1），将学院创新创业工作的日常管理制度化、规范化。 在队伍建设方面，学院组成以院长左高山教授、党委副书记赵平副教授为首的学生创新创业专家指导小组。 实行“双轨导师制，在学生自愿选择的基础上聘请学院各系专业老师与优秀研究生作为学生的学业导师和班导师，与导师形成一对一指导方式，指导学生创新创业活动，对学生进行创新创业教育。 通过这种方式，学生不仅从指导老师那里学到了所需的专业知识，更扩展了自身的知识结构，增强了沟通组织能力，培养了创新意识和创业精神，提高了自身的综合素质。 二、建立学院品牌，强化基地建设，鼓励大学生投身创新创业活动。 根据实际情况，学院领导意识到，学生在开展创新创业活动时，因为没有资金支持，很多优秀的项目被-迫停止了。

因此，为了能让学生创作出更加优秀的创新创业作品，从2015年建院起，学院拿出部分资金资助学生进行创新创业课题的研究，在继承原政治学与行政管理学院品牌创新项目“五高杯的基础上，建立学院新的“五高杯大学生创新性实践计划项目，增加创业团队的申报资格，作为学院新的创新创业基地。 2015年，经过学生自行申报课题，学生答辩，专家小组评审，学院共评出十项品牌项目，每项资助1000元；2011年，学院更加大投入，拿出20，000元支持学生开展创新创业活动（见附件2）。 1为进一步引导大学生自觉走理论与实践相结合的成才之路，让大学生在实践中受教育、长才干、做贡献，提高大学生分析问题和解决问题的能力，培养应用型和创新型人才，同时为推进当地经济社会的可持续发展，经与株洲攸县石羊塘镇友好协商，学院在当地挂牌建立创新创业实践基地，组织同学参与实践。 学院的举措大大鼓励了广大同学，参加创新创业活动的团队越来越多（见附件3）。 三、注重引导培训，指导实地调研，鼓励学生投身创新创业活动。 2015年至今，学院每年都会举行关于创新创业方面的系列讲座和培训，邀请优秀创新创业团队成员对广大学生，特别是低年级学生积极动员引导，并指导实践培训。 举办各类创新创业讲座及培训近10场，邀请嘉宾人数近20人次，参加讲座培训的学生达1500多人次（见附件4）。

创新创业领导力尔雅网课答案

陆向谦非常规自我实现方法与“Disruptive Theory”（上） 1 华谊兄弟创始人是（）。 A、王长田 B、王中军 C、周成建 D、陈义红 正确答案：B 2 以下华人中未获得诺贝尔奖的是（）。 A、莫言 B、杨振宁 C、钱学森 D、李政道 正确答案：C 3 被称为“现代山寨机之父”，台湾的联发科技创始人是（）。 A、张兰 B、庄辰超 C、蔡明介 D、沈国军 正确答案：C 4 中国文化中有非常大的“趋同”效应。（） 正确答案：√ 5 相比较而言，在学习和工作方面犹太人用的时间比中国人更多。（）正确答案：×

陆向谦非常规自我实现方法与“Disruptive Theory”（下） 1 根据Disruptive theory，创新有（）。 A、Disruptive B、non Disruptive C、A和B都不对 D、A和B都选 正确答案：D 2 “对真理的追求比对真理的占有更重要。”出自哪位名人（） A、马克思 B、恩格斯 C、霍金 D、爱因斯坦 正确答案：D 3 按照时间，以下计算机出现的顺序正确的是（）。 A、中型机、mainframe、SGI、PC B、P C、中型机、mainframe、SGI C、mainframe、中型机、SGI、PC D、SGI、mainframe、中型机、PC 正确答案：C 4 Disruptive往往是在边缘上，而不在中心。 正确答案：√ 5 任何一个大的成功，其背后创业的founder实际上都是一个常规自我实现的案例。 正确答案：× 胡波与慈铭体检（一）

1 据相关数据统计，每隔4年，人的平均寿命就增加（）年。 A、.0 B、1.0 C、2.0 D、3.0 正确答案：B 2 胡波董事长所学的专业是（）。 A、营销学 B、心理学 C、管理学 D、医疗影像学 正确答案：D 3 慈铭体检的董事长是（）。 A、郭建新 B、宋志平 C、胡波 D、修涞贵 正确答案：C 4 胡波董事长是在清华读的硕士。（） 正确答案：× 5 创业有好的合作伙伴是非常重要的。 正确答案：√ 胡波与慈铭体检（二） 1 慈铭第一家启动是在（)年。 A、2002.0

创业创新领导力答案陆向谦.doc

创业创新领导力课后作业参考答案陆向谦非常规自我实现方法与“Disruptive Theory”（上）1 华谊兄弟创始人是（）。 A、王长田 B、王中军 C、周成建 D、陈义红 我的答案：B 2 以下华人中未获得诺贝尔奖的是（）。 A、莫言 B、杨振宁 C、钱学森 D、李政道 我的答案：C 3 被称为“现代山寨机之父”，台湾的联发科技创始人是（）。 A、张兰 B、庄辰超 C、蔡明介 D、沈国军 我的答案：C 4 中国文化中有非常大的“趋同”效应。（） 我的答案：√ 5 相比较而言，在学习和工作方面犹太人用的时间比中国人更多。（） 我的答案：× 陆向谦非常规自我实现方法与“Disruptive Theory”（下） 1 根据Disruptive theory，创新有（）。 A、Disruptive B、non Disruptive C、A和B都不对 D、A和B都选 我的答案：D 2 “对真理的追求比对真理的占有更重要。”出自哪位名人（） A、马克思 B、恩格斯 C、霍金 D、爱因斯坦

我的答案：D 3按照时间，以下计算机出现的顺序正确的是（）。 A、中型机、mainframe、SGI、PC B、P C、中型机、mainframe、SGI C、mainframe、中型机、SGI、PC D、SGI、mainframe、中型机、PC 我的答案：C 4Disruptive往往是在边缘上，而不在中心。 我的答案：√ 5任何一个大的成功，其背后创业的founder实际上都是一个常规自我实现的案例。我的答案：× 胡波与慈铭体检（一） 1据相关数据统计，每隔4年，人的平均寿命就增加（）年。 A、.0 B、1.0 C、2.0 D、3.0 我的答案：B 2胡波董事长所学的专业是（）。 A、营销学 B、心理学 C、管理学 D、医疗影像学 我的答案：D 3 慈铭体检的董事长是（）。 A、郭建新 B、宋志平 C、胡波 D、修涞贵 我的答案：C 4胡波董事长是在清华读的硕士。（） 我的答案：× 5创业有好的合作伙伴是非常重要的。 我的答案：√ 胡波与慈铭体检（二）已完成 1慈铭第一家启动是在（)年。

创青春创新创业大赛执行方案演示教学

创青春创新创业大赛 执行方案

创青春创新创业大赛执行方案 目录 活动概述 分工框架 前期执行 媒体执行 海选执行 复赛执行 总决赛执行 物料清单 费用预算

活动概述 1.活动名称：首届创青春创新创业大赛 2.活动时间：2017年3月-2017年9月 3.参赛对象：宿迁大学生村官、返乡创业青年；苏北城市的在校大 学生、高校毕业生等创新创业青年个人或团队。 4.项目要求：拥有创新成果或创业计划的创业团队和青年创客；优 先支持互联网、电商、智能制造等新兴产业项目；参赛者的项目方案必须具有原创性，不得侵犯他人知识产权和权利，对违反他人知识产权和权利的自行承担全部责任，不得干扰赛事的正常进行。 5.报名方式：线上以邮件方式提交，发送到相关邮箱；线下以学校 为单位，统一提交。 6.竞赛方式：通过PPT和演讲对项目进行介绍和答辩 7.组织机构： 主办单位：宿迁市委组织部、宿迁市科技局、宿迁市团市委、宿迁银监分局 承办单位：宿豫区委组织部、宿豫区创业板、宿豫区电子商务产业园、宿豫区科技局、宿豫区产业办、宿豫区团区委 协办单位：宿豫区金融办、宿豫区电视台

赞助单位：江苏益农科技有限公司 特别支持：微秀网络科技有限公司、Boot comp 创业训练营 8.赛区设置： 宿迁宿迁学院 连云港淮海工学院 淮安淮阴师范学院、淮阴工学院 盐城盐城师范学院、盐城工学院 徐州江苏师范大学、中国矿业大学、徐州医学院、徐州工程学院 9.大赛流程： 1.海选：4月10日-5月20日，通过宣传，线上线下征集，方案提交截止日期为4月10 日，选取100个项目； 2.复赛；5月30日前完成，选取40个项目名额； 3.半决赛；6月30日前完成，选取20个项目名额； 4.总决赛；7月下旬，创业组6强，创意组6强，共12个项目名额。 10.奖项设置： 创业组： 设一等奖一名，奖金2万元整。 设二等奖贰名，奖金1万元整。 设三等奖叁名，奖金0.3万元整。 创意组： 设一等奖一名，奖金1万元整。 设二等奖贰名，奖金0. 5万元整。

创业创新领导力题目正确答案

一、陆向谦非常规自我实现方法与“Disruptive Theory” 何为领导力 1 被称为“现代山寨机之父”，台湾的联发科技创始人是（）。 A、张兰 B、庄辰超 C、蔡明介 D、沈国军 我的答案：C 得分：25.0分 2 华谊兄弟创始人是（）。 A、王长田 B、王中军 C、周成建 D、陈义红 我的答案：B 得分：25.0分 3 以下华人中未获得诺贝尔奖的是（）。 A、莫言 B、杨振宁 C、钱学森 D、李政道 我的答案：C 得分：25.0分 4 相比较而言，在学习和工作方面犹太人用的时间比中国人更多。（） 我的答案：× 非常规自我实现 1 按照时间，以下计算机出现的顺序正确的是（）。 A、中型机、mainframe、SGI、PC B、P C、中型机、mainframe、SGI C、mainframe、中型机、SGI、PC D、SGI、mainframe、中型机、PC 我的答案：C 得分：25.0分

“对真理的追求比对真理的占有更重要。”出自哪位名人（） A、马克思 B、恩格斯 C、霍金 D、爱因斯坦 我的答案：D 得分：25.0分 3 任何一个大的成功，其背后创业的founder实际上都是一个常规自我实现的案例。我的答案：×得分：25.0分 4 Disruptive往往是在边缘上，而不在中心。 我的答案：√ 二、胡波与慈铭体检 胡波创业想法的萌生 1 慈铭体检的董事长是（）。 A、郭建新 B、宋志平 C、胡波 D、修涞贵 我的答案：C 得分：25.0分 2 胡波董事长所学的专业是（）。 A、营销学 B、心理学 C、管理学 D、医疗影像学 我的答案：D 得分：25.0分 3 创业有好的合作伙伴是非常重要的。 我的答案：√得分：25.0分

创新创业领导力期末

创业创新领导力陆向谦 ?《创业创新领导力》期末考试 姓名：殷昌旭班级：15暑期成绩：100分 一、单选题（题数：50，共 50 分） 1 环境信息平台项目共有几个组织？ 1.0分 ?A、 3个 ? ?B、 4个 ? ?C、 5个 ? ?D、 6个 ? 正确答案：D 我的答案：D 2 下列关于微型空气质量监测仪的“体积”阐述正确的一项是：

1.0分 ?A、 还需进行放大 ? ?B、 还需进行缩小 ? ?C、 已经达到最小了 ? ?D、 已经达到最大了 ? 正确答案：C 我的答案：C 3 未来十年，产品将与网络相结合，称之为：1.0分 ?A、 产品2.0时代 ? ?B、 产品时代 ? ?C、 互联网时代

? ?D、 互联网2.0时代 ? 正确答案：A 我的答案：A 4 “快牙”软件是一款： 1.0分 ?A、 手机游戏 ? ?B、 网页游戏 ? ?C、 视频播放器 ? ?D、 文件传输软件 ? 正确答案：D 我的答案：D 5 微型空气质量监测仪的传感器目前面临的最大问题是：1.0分

成本高 ? ?B、 技术难题 ? ?C、 三防问题 ? ?D、 耗电 ? 正确答案：D 我的答案：D 6 众筹网站主要建立在国外，其原因为：1.0分 ?A、 国内无相应网站 ? ?B、 国民素质低 ? ?C、 国内众筹互联网不成熟 ?

国际化发展 ? 正确答案：C 我的答案：C 7 张庆永觉得律师行业没出现大成就的人物，原因是：1.0分 ?A、 知道的过多 ? ?B、 法律知识欠缺 ? ?C、 与市场规律不合 ? ?D、 与人民利益不合 ? 正确答案：A 我的答案：A 8 “慈铭体检”的创新之处在于： 1.0分 ?A、

项目的特色与创新之处-推荐下载

（一）项目特色 1.调研项目切合现实需要 来华留学生人数的不断增加给中国的大学的教育体制和管理模式提出了新的课题。中国的大学需要为这些蜂拥而至的留学生提供各种服务，解决他们在华求学过程中遇到的教育、情感和健康等各个方面的问题。与本国大学生相比，一些本科阶段的留学生不仅要经历从高中到大学阶段的转型期的压力和焦虑，而且还要面对文化差异带来的各种困境和难题。跨文化接触带来的不仅仅是新奇与神秘，更多的是压力体验，是一个充满梦想和挑战的历程。语言和文化上的差异更进一步加剧了留学生的适应困难。吃饭和作息混乱，易怒、过分关注健康、普遍的情绪低落、对东道国成员不信任甚至敌视都是留学生面对文化差异所带来的精神压力的外在显示．文化适应的失败使留学生遭受学业上的失败，导致留学生退学，或者延期完成学业。有的甚至导致严重的心理疾病，造成悲剧。留学生在东道国的社会文化适应状况甚至影响到他们回国之后对东道国的评价以及东道国在国际上的形象。但这一问题并未引起我国留学生教育研究者的重视，对于来华留学生适应过程的研究更少。随着来华留学生教育事业的蓬勃发展，留学生跨文化适应问题的研究已经成为现实之需。 2.资源优势 本团队成员与以北京大学、清华大学、中国人民大学为代表的北京多所高校的同学沟通交流，与相关的老师和项目负责人取得了积极联系。指导该项目的老师对教育管理、教育现状有着深入的了解和丰富的实践经验，这为之后调研数据的获得提供了极大便利，在指导老师的悉心指导下，调研工作可以更为利的开展。在开展项目之前，我们已经对留学生团体进行了预先调查和采访。由于切合自身利益，留学生普遍反映积极并反应出现有留学生制度的一些缺陷，给项目进一步的开展和调查提供指导方向。 3.调研方式多样 通过多角度、多手段的调研获取第一手资料。现有的对高校留学生团体生活、教育的理论、政策研究较多，而深入高校进行详尽的实地调查较少，集中对高校留学生跨文化视角下的认同度研究更少。而且这些调查一般涉及问题数较少，获得的信息十分有限，不足以完整地刻画各高校留学生团体的现状、问题、期望、需求等方面。 我们的调查范围涉及参加留学生团体的来华目的、教学师资、跨文化认同、学费问题、后期影响等方方面面的信息，这些一手数据填补了现在对留学生调查的空白，有较高的现实意义和理论价值。我们通过调查问卷、对调查对象——高校学生进行点对点的采访、与相关项目负责人和留学生管理中心负责人进行交谈、电话式访谈等多种方式获取高质量、多方面的大样本数据，为研究提供数据支持。 项目组多位成员曾参加“创新杯”论文大赛、暑期社会实践等学术实践活动，有非常丰富的设计、发放调查问卷和与被访者进行深入交流的经验。同时，调查过程中可以向被访者提供一些礼品，鼓励其配合我们的调查。调查对象为高校学生、老师等高素质人群，调查过程较容易获得配合，调查数据较容易获得。 4.管理学、金融学多角度的分析框架及丰富的实践经验。 我们小组的五位成员分别来自两个不同的学院。因此，在调查和研究的过程中我们将充分展现出学科交叉、优势互补这一特色，运用金融学、经济学、管理

创业天府菁蓉训练营—走进天府软件园活动方案

创业天府·菁蓉训练营—走进天府软件园 活动方案 一、活动背景 创业天府·菁蓉训练营是“创业天府·菁蓉汇”系列活动的重要组成部分之一，本次菁蓉训练营走进天府软件园专场，将通过线上与线下的整体互动，聚集投资人、企业家、政府管理者等不同领域的创业导师，针对不同创业阶段的创业者、创业团队、创业企业，对创新创业项目在商业模式、投融资、运营管理、营销推广等方面进行辅导和培训，解决创业者在创业中出现的问题，为创新创业团队发展助力。 现将于2018年9月26日举办“创业天府·菁蓉训练营—走进天府软件园”活动，有关事项通知如下： 二、参加人员 参加训练团队20-30个，培训人数120人。 （一）上午课程环节面向我市投融资机构、创新创业团队及个人开放报名，可通过科创通（）报名。

（二）下午辅导环节由参与联办的各创新创业载体筛选推荐创业项目及科创通“项目征集入口”提交项目（单个项目报名人数不超过3人）。 三、活动时间及地点 时间：2018年9月26日（09:30-17:00） 地点：成都市高新区天府软件园C区1栋3楼会议厅四、组织单位 指导单位：成都市科学技术局 主办单位：成都市创新创业服务中心 成都科技企业孵化器协会 成都高新区创新创业服务中心 天府软件园 协办单位：高新区创新创业协会 洪泰（成都）基金 智汇青年 成都菁蓉投资有限公司 五、活动形式及安排 1、活动形式： 菁蓉训练营采用线上、线下报名的方式，面向全社会征集创业者（团队）的创业项目，项目经过筛选后，组织创业

者（团队）进入训练营。本次训练营包括两个环节，上午为嘉宾面对面授课、分享环节；下午为分组导师问诊环节，将由投资人和创业导师共同组成的导师团进行多对一辅导。 2、活动安排： ?09:30-10:00 菁蓉训练营报到 ?10:00-11:00 手把手教你拿到第一笔融资 贺照峰高新区创新创业协会秘书长?11:00-12:00 如何吸引投资人的眼光 吴恒洪泰（成都）基金创始合伙人?12:00-13:30 午间休息 ?13:30-17:00 导师问诊 每组6-7个团队，分成3-4组，每个项目辅导时间不超过30分钟，导师团由1位创业导师和1位投资人组成。六、其他事项 分享课程环节适合初创项目核心团队成员参与；导师问诊环节的创业项目须准备10分钟以内的项目介绍PPT；本次活动优秀项目将获得价值万元的深度训练营入营资格。

超星尔雅《创新创业领导力》

第一章陆向谦非常规自我实现方法与.。。 1。１何为“领导力"？ 1. [单选题］下列选项中,谁就是华谊兄弟创始人？() A。王中军 B。王长田 Ｃ、陈义红 D.周成建 答案:A 2。［单选题] 以下现象中,谁被称为“现代山寨机之父”?() Ａ.庄辰超 B、张兰 Ｃ、沈国军 D.蔡明介 答案:D 3。［判断题］“趋同”效应在中国文化中普遍存在。() 答案:对 4、［判断题] 相比较而言,中国人在学习与工作方面用得时间比犹太人更多。() 答案:对 1。2非常规自我实现 1.［单选题] 哪位名人曾说过“对真理得追求比对真理得占有更重要、"？()

A、恩格斯 B、马克思 Ｃ.爱因斯坦 D.霍金 答案:C 2。[单选题］对以下计算机进行排序,正确得时间顺序就是()、A。PC、中型机、ｍainｆrame、ＳＧI B、中型机、mａinｆrame、SGI、ＰC C。ＳＧI、maiｎfｒame、中型机、PＣ Ｄ、mainframe、中型机、SGI、ＰC 答案:D 3、［判断题]Diｓruptive往往就是在中心上,而不在边缘。() 答案:错 ４. ［判断题］每一个大得成功背后,创业得ｆｏunｄｅr实际上都就是一个常规自我实现得案例得体现。() 答案:错 第二章胡波与慈铭体检 2。1胡波创业想法得萌生 １、［单选题］下列哪项就是胡波董事长所学得专业？() A、心理学 B、营销学 Ｃ、医疗影像学

D。管理学 答案:C 2。[单选题]下列选项中,谁就是慈铭体检得董事长?() Ａ、宋志平 B。郭建新 Ｃ、修涞贵 D、胡波 答案:D ３、[判断题] 胡波董事长不就是在清华读得硕士、() 答案:对 4. [判断题］好得合作伙伴对创业来说就是非常重要得。() 答案:对 2。２体检行业得创业环境 1. [单选题］慈铭体检最早开始启动就是在()年、 Ａ.２008年 B。2002年 C、2003年 D.２０01年 答案:D ２、[多选题］下列哪些国家不拥有比较成型得得专做体检得模式?() A、法国 Ｂ。美国

本项目的特色与创新之处

本项目的特色与创新之处 1．该项目建立在社会认同基础概念研究，社会认同和归属感相关性的基础研究之下，探索城镇化建设过程中农民工的社会认知与归属感问题，积极关注城镇化和农民问题在我国经济和社会发展中的影响 2．社会认同和归属感为研究视角，以中国社会经济发展的大背景下城市中农民工为研究被试，探索城镇化建设过程中农民工的社会认同与归属感问题，与更广泛的研究问题相结合，不断扩展，为国家的城镇化建设提供合理的建议。 3、国内社会心理学、社会学及认知心理学等学科的研究思 想和方法，分析城镇化建设中农民工的社会认同与归属 感问题及影响因素，为社会认同与归属感的研究提供新 视角。 社会认同的英文是socialidentity。Identity的原意是指身份，在汉语中，身份一词泛指个人在社会上的地位和资历，溯其源，北齐颜之推的《颜氏家训，省事篇》云：“吾自南及北，未尝一言与时人论身份也。”但在社会认同理论中，identity一词的意义却与此不同。Identity的动词为identi-fy；identify有两重意义。其首义为鉴别、辨认，也就是把某人或某物在众多人或物中辨认出来。

社会认同论采纳了这个词义，把identity定义为可以将个人与他人分辨开来的个人和社会特征 社会认同理论由Tajfel于1986年提出，为解释群体行为提供了新的思路。它认为社会认同是一个人自我概念的重要组成部分，会影响到他们的社会态度和行为。在塔弗尔开启了社会认同研究新思维的三十多年来，先后在欧洲、加拿大、澳大利亚、美国得到充分重视和大量研究。它的提出促进了社会心理学在相关领域的发展，为群体心理学的研究做出了巨大的贡献。本文对社会认同理论的历史做一简单回顾，再对其研究成果和面临问题探索的基础上对它进行评价和展望 归属感亦称隶属感是个体对自己有所隶属的一种心理体验，强调个体的自我感知，是个体被接纳和认同而产生的感觉。归属感可以简单理解为归于或属于某种事物所产生的情感 隶属于社会文化心理范畴 不易感知 却客观地存在并影响着人的行为表现。归属感是外界环境作用于人而产生的一种内部主观意识，这种作用结果又进一步影响着人在环境中的行为。归属感在美国心理学家马斯洛(Abraham Har-old Maslow)的需要层次理论中有所阐述。马斯洛把人的需求分成生理需求、安全需求、社交需求、

关于全面实施创新驱动发展战略加快建设创新型省份决定.doc

湖州市农业局湖州市科学技术局关于印发贯彻落实创新驱动发展战略进一步推进农业科技创新与推广应用的实施意见的通知 湖农发〔2013〕50号 各县区农业（林）局、科技局，湖州开发区、太湖度假区社发局： 为认真贯彻省委《关于全面实施创新驱动发展战略加快建设创新型省份决定》和省农业厅、科技厅《关于印发贯彻落实创新驱动发展战略进一步推进农业科技创新与推广应用实施意见的通知》（浙农科发〔2013〕19号）精神，结合市委、市政府《关于加快推进农业科技创新的若干意见》，特制订《关于贯彻落实创新驱动发展战略进一步推进农业科技创新与推广应用的实施意见》，现印发给你们，请认真组织实施。 附件：关于贯彻落实创新驱动发展战略进一步推进农业科技创新与推广应用的实施意见

湖州市农业局湖州市科学 技术局 2013年10月15 日

附件 关于贯彻落实创新驱动发展战略进一步推 进 农业科技创新与推广应用的实施意见 为认真贯彻省农业厅、科技厅《关于印发贯彻落实创新驱动发展战略进一步推进农业科技创新与推广应用实施意见的通知》和市委、市政府《关于加快推进农业科技创新的若干意见》精神，扎实推进农业现代化“8810”三年行动计划和农业科技四大工程的实施，进一步强化农业科技支撑，促进我市农业现代化发展，特制定如下实施意见： 一、加快推进农业科技创新的重要意义和总体要求 （一）重要意义。农业科技创新是推动农业发展方式转变和农业现代化的强大动力，是提高农业核心竞争力和土地产出率、劳动生产率、资源利用率的根本保障。近年来，我市不断强化农业科技创新，深化基层农技推广体系改革与建设，推进农业科技成果转化和应用，有效地促进了农业产业升级和增长方式转变，推动了农业农村经济发展和国家现代

模具设计与制造专业特色与创新项目报告

模具设计与制造专业特色与创新项目报告 模具制造是一种技术、资金、人才密集型的产业，在我国国民经济中占有非常重要的地位。模具制造一直就有“一切制造之母”的称号。模具工业作为国家的基础产业，早在1989年就被国家定为机械工业技术改造序列第一位，在“十五”规划中列为重点扶持产业。鉴于模具作为包括机床工具、汽车制造、食品包装等在内的机械行业中机械基础件产业，以及电工电器、电子及信息行业的支持产业，在发展先进生产力当中，处于非常关键并服务全行业的地位，其发展对产业配套能力的提升和促进产业聚集优势的形成将起到链接和枢纽作用。 我院自2004年开办模具设计与制造专业以来，已有两届毕业生，且就业率均在97％以上，目前在校生329人，具有一定师资、教学、实验及实训条件和教学管理经验。纵观4年来的办学情况和发展趋势，我们不断地总结经验，改正教学环节中存在的种种缺点和不足，重点进行专业建设和以工学结合优质核心课程为中心的课程教学改革,充实师资队伍，扩建实训室、实验室和校内外实习基地，坚定不移地走工学结合的办学道路，充分整合社会资源扩建本院实习实训基地和实践指导教师队伍。专业办学4年来，积累了丰富的教学经验，创立了一套高职模具专业的教育模式，形成了高效的教学管理系统，并且在4年来的教学研讨和教学改革的过程中取得了较大的进步。4年来，我们为珠三角地区培养了一批高素质的活跃在模具设计、制造、销售、调试安装、生产管理等工作岗位的一线人员，就业率高达97％，且受到用人单位的一致好评。4年来的教学和改革，使我院高职模具专业办学的各种条件已经

具备并且基本完善了。目前师资队伍结构合理，课程设置科学规范，实验实训设备日趋完善，教学管理体制科学高效，实验教学和实践教学系统全面，学生综合素质教育和各项管理工作均适合学生的实际情况和社会对人才的需要，使本专业形成较完整的人才培养体系和教学管理体系，成为珠三角地区同行业最具竞争力的专业之一。 专业教学改革使得模具设计与制造专业形成如下鲜明的特色、创新点和亮点： 1 课程开发的动态适应性，体现了高职教育的特色 本专业课程开发的主要原则如下： 1)以社会需求为前提。要以满足人才市场需求作为学校办学的定位坐标和课程设置的出发点，社会需求什么，我们就增设开发相应的课程，力争与用人单位的实际需要接轨，模具专业开设了《英语能力考证》、《计算机辅助设计绘图员（高级）》、《助理模具设计师》的考证课，使毕业生在毕业时获得双证或三证，更符合用人单位的需求。为此，将《机械制图》绘图实训和《计算机绘图AutoCAD》实训整合为《绘图能力综合实训》。将原来《冲压模具设计》课程设计、《塑料模具课程设计》和《模具拆装实训》，整合为《冲压模具设计综合实训》和《塑料模具课程设计综合实训》课程。实训课程中加强机械制图的训练，持续提升学生的制图能力。随着就业形势的变化，还增加《压铸挤压模具设计》课程，以增加学生就业范围。 2)以能力培养为重点。普通高等教育以培养研究型人才为主，高职教育旨地培养应用型人才，“能力为本”是高职教育的特征之一。因此，

英国剑桥创新创业训练营

英国剑桥创新创业训练营 Cambridge Innovation and Entrepreneurship Camp, CIEC 2018.8.12 - 2018.8.24 剑桥，浓厚的学术风气和创业氛围孕育出了此地独有的“剑桥创业邦”，世界级的成功企业诞生于此地，行业覆盖比硅谷更加广泛，与资本的结合更加紧密，被企业管理界誉为“剑桥现象”。而今天，我们希望把这里的创业精神，传递到你的手中。 你，准备好了吗？ 让智慧和创意在跨界中生长，让产品和资本在全球范围内流通，让idea变成真正产生现金流的伟大企业，让你真正拥有改变世界的力量。 创业剑桥：完善的创业教育产生丰硕成果 ——没有人天生就会创业，“生意头脑”完全来自教育 联合国教科文组织是这样定义的：“创业教育，从广义上来说是指培养具有开创性的个人，它对于拿薪水的人同样重要，因为用人机构或个人除了要求受雇者在事业上有所成就外，正在越来越重视受雇者的首创、冒险精神，创业和独立工作能力以及技术、社交、管理技能”。 自上世纪80年代中期开始，剑桥大学就开始鼓励学生创业。多年来，剑桥大学已经形成了相对完整的创业教育体系，是高等学府鼓励学生创业的楷模。特别是在近几年经济危机爆发、年轻人就业困难的大环境下，剑桥大学在创业教育方面投入非常大，在技术创新、创办和管理企业、以及融资等方面对学生进行多渠道的全面支持。其中的代表之一是剑桥大学商学院设立的“创业学习中心”，不仅为各专业学科的师生及科研人员提供创业相关课程，还为科研人员和商务人士的沟通构建了平台。

除了高水平的创业教育之外，剑桥地区还有很多诸如“剑桥企业”（Cambridge Enterprise），“剑桥科技园”（Cambridge Science Park）等机构，为剑桥的高科技初创公司提供从软件到硬件的全面服务。其中的“剑桥企业”是帮助推动科技成果转化的非营利机构，为有志于创业的师生提供创业培训、商业导师、种子基金、知识产权管理、咨询建议、商业计划等服务；而“剑桥科技园”则侧重于为高科技初创企业提供理想的创业环境和硬件支持，并因为众多优秀高科技企业的聚集而形成在生物技术和IT等领域的集合效应。 诞生于剑桥的世界级企业 移动通讯行业定义者：ARM芯片 1978年12月5日，物理学家赫尔曼·豪泽（Hermann Hauser）和工程师Chris Curry，在英国剑桥创办了CPU公司 （Cambridge Processing Unit），1979年，CPU公司改名为Acorn计算机公司。今天，搭载ARM芯片架构的设备 数量是英特尔芯片的25倍。全世界99%的智能手机和平板电脑都采用ARM架构。约有43亿人每天都会触摸一台搭 载ARM芯片的设备，占全球总人口的60%。2016年7月，ARM被日本软银公司以309亿美元收购。 大数据分析的先驱：Autonomy 1996年6月，三位剑桥大学的信息技术科学家Michael Lynch, David Tabizel and Richard Gaunt在剑桥创立了著名 的Autonomy公司。Autonomy以分析大规模非结构化的大数据而享誉业界，在知识信息管理和模式识别技术等方面 也建树颇丰。截止2010，该公司在短短14年内就成长为英国最大和最成功的软件企业。因为Autonomy在大数据分 析领域的地位，美国惠普公司在2011年10月以117亿美元全资收购Autonomy.

创新创业领导力

《创新创业领导力》学后感 信号1705班王勋201711154 很幸运这个学期可以选陆向谦老师的创新创业领导力这门网课，它帮助我更加全面具体的了解了创业者如何创业，是如何在同行的竞争下取得成功。也让我正确的认识到创业的艰辛，以前的我就天真的以为创业就仅仅只是有钱，开一家公司，其实完全是错的，创业需要很多方面，很多人其实不具备创业的条件，我个人觉得钱这些东西是外在的方面，对于内在的方面，我觉得一个人是否有领导力直接决定这个人能否创业成功。那么何为领导力？我认为领导能力首先是一个人的个性和洞察力——他作为一个人的最核心的东西。所以他就必须拥有良好个人品质，能使别人信赖。其次，还有很多必须所拥有的品质。这些品质还必须与能积极与人沟通的能力结合起来。领导人物和别人建立良好人际关系，开始关怀别人，学会与别人交谈和调动别人的积极性。始终走在队伍的最前面，不断的自我成长，自我完善，为自己制订衡量的标准，为别人指引所要走的道路和鼓励他们去走完道路。更为直接的说法就是指在管辖的范围内充分的利用人力和客观条件在以最小的成本办成所需的事提高整个团体的办事效率。领导力是一种特殊的人际影响力。所以领导力是创业成功的必要条件之一。 成功，就是做好一件你想做的事情。这门课很多知名人士的成功，都是非常规自我实现来获得成功，京东创始人刘强东，最早在中关村卖刻录盘的时候，线下可以有六千多万的销量，线上仅仅只有一千多万的销量，而刘强东毅然决然关闭了线下的店专门开始在线上售卖，

他这一个举措就是非常规自我实现，沈思，在获得斯坦福硕士学位之后进入谷歌，在谷歌任中高层，她本可以继续在谷歌争取发展，可是她决定辞掉谷歌的工作，回国创业，这个也是非常规的自我实现。大成功必须要有非常规自我实现，也就是颠覆性创新。大多数人从小学开始就被教导要好好读书，考上好的高中，然后努努力考上好的大学，毕业之后最好进入一个稳定的公司稳定发展，这就是常规，反观这些常规，有多少人在经过常规之后实现了大成功，微软总裁比尔盖茨初中的时候很早就起来去学校机房写程序，可是他自己的基础课学习却不怎么样，他这个就是非常规自我实现，每个人都应该找到自己的兴趣所在，而不是一味的走常规路，一个模子刻出来的能有多大的成功，大多数人都是一样的，陆向谦老师小时候那个年代政治不稳定，当是在搞政治运动，他就喜欢自己看书，不断学习，在文革时期这么做可以是一个异类，但是最后在1976年高考的时候，他轻易的击败对手，顺利进入清华大学，80年代初他决定去美国留学，当时去美国留学不像现在这么火爆，因此没什么竞争，他到美国后发现中国缺少的并不是工程师，而是管理者，当时中国推崇的是数理化，当时的工商管理经济学是特别冷门的课程，他这个大胆的决定帮助他结实到了摩托罗拉，并成功的把摩托罗拉带进了中国。陆向谦老师有今天的成功，完全就是因为他每一步走的都非常的不寻常，不去走千军万马正在过的独木桥，而是自己独辟蹊径，也就是非常规的自我实现，追随自己的内心，做别人不敢做的事情，走别人不敢走的路。

创业创新领导力

创业创新领导力 1.1何为“领导力”？待做 1【单选题】以下现象中，谁被称为“现代山寨机之父”？（） ?A庄辰超B张兰C沈国军D蔡明介 2【单选题】下列选项中，谁是华谊兄弟创始人？（） ?A王中军B王长田C陈义红D周成建 3【判断题】相比较而言，中国人在学习和工作方面用的时间比犹太人更多。（） 4【判断题】“趋同”效应在中国文化中普遍存在。（） 1.2非常规自我实现待做 1【单选题】对以下计算机进行排序，正确的时间顺序是（）。 ?A PC、中型机、mainframe、SGI B中型机、mainframe、SGI、PC ?C SGI、mainframe、中型机、PC D mainframe、中型机、SGI、PC 2【单选题】Disruptive theory认为创新是（）。 ?A non Disruptive B Disruptive C A和B都选D A和B都不对3【判断题】 每一个大的成功背后，创业的founder实际上都是一个常规自我实现的案例的体现。（）4【判断题】Disruptive往往是在中心上，而不在边缘。（） 2.1胡波创业想法的萌生待做 1【单选题】下列哪项是胡波董事长所学的专业？（） ?A心理学B营销学C医疗影像学D管理学2【单选题】据相关数据显示，人的平均寿会每隔四年增加（）年。 ?A1年B4年C3年D2年 3【判断题】好的合作伙伴对创业来说是非常重要的。（） 4【判断题】胡波董事长不是在清华读的硕士。（） 2.2体检行业的创业环境待做 1【单选题】从哪个时期开始，日本体检兴起？（） ?A21世纪B新时期C二战时期D一战时期2【单选题】慈铭体检最早开始启动是在（）年。 ?A2008年B2002年C2003年D2001年3【判断题】韩国的商业模式及结构最符合慈铭体检。（） 4【判断题】“慈济”是“慈铭”体检最开始的名字。（） 2.3慈铭体检集团的发展待做 1【单选题】癌症在以下哪个地区的发病率最高？（） ?A非洲B欧洲C南美洲D亚洲 2【单选题】癌症的检出率和治愈率在以下哪个国家是最高的？（） ?A韩国B中国C日本D德国 3【判断题】对于大多数人，普通体检和深度体检都同样需要。（） 4【判断题】早期胃癌可以通过无痛的胃肠镜来发现。（） 2.4中外健康管理体系比较待做

大学生创新创业先锋特训营课程日程安排

附件1：大学生创新创业先锋特训营课程日程安排

一、万学教育集团简介

万学教育是中国十大教育集团之一，创立于2006年,凭借超越传统的革命性教育模式，成为针对18岁至30岁青年群体的国内最大规模教育集团。在青年群体学业、职业与创业发展培训项目方面，已成为中国首屈一指的教育机构。 万学教育凭借着里程碑意义的革新，突破了限制教育质量的固有规律，利用革命性先进模型帮助学习者高速度和大幅度提升各种重要能力，刷新了多项历史记录，缔造了中国教育行业的发展传奇。 万学建成了全国教育行业中最大的深度教学与高端辅导基地，全国设有22个省级分校和五百余个教学中心。全国独家聘请高端教育专家、教授及企业家535名,197名博士后，976名博士，16000名硕士构建了庞大的教学服务网络。 万学团队对教育事业充满探索激情与创新精神，凭借远超常规效率的教育研究与突破传统瓶颈的先进教育技术，以及教育行业的突出贡献，获得了社会认可与资本支持。 2008年，获红杉资本和联想集团共同投资2000万美金，旨在支持万学更有效的研发基于人类能力图谱的高端学业、职业和创业系列课程和提供各类高端教育服务。 2009年，获人民日报、光明日报、经济日报专题报道 2011年，获DCM基金、红杉资本、联想集团和新加坡凤凰基金2000万美金投资，万学在已经创造业内遥遥领先的教育品质与培训系统之上，将于未来五年投入超过十亿人民币，为中国大学生群体打造迅速提升多项重要能力的高端在线教育平台。 2014年，获百度、浩然资本和DCM基金3500万美金投资，旨在全面升级与推广万学开发的智能矩阵学习系统和互联网+企业核心职业能力培训系统。 2011年—2015年，连续五年被新华网、中国网、腾讯网、新浪网评为中国十大教育集团。 二、讲师简介 牛晋 中国人民大学、复旦大学、吉林大学、四川大学等多所著名高校创业导师 北京万瑞腾达投资基金副总裁 全国高校创新创业投资服务联盟委员会委员，教育部中国互联网+创新创业大赛专家委员。牛老师对企业资本运营、品牌建设、战略规划、市场营销具有丰富实践经验和全面深层研究。主要关注节能环保、信息科技、先进制造、文化

创业创新领导力课后作业参考答案汇总

创业创新领导力课后作业参考答案 陆向谦非常规自我实现方法与“Disruptive Theory”（上） 1 华谊兄弟创始人是（）。 A、王长田 B、王中军 C、周成建 D、陈义红我的答案：B 2 以下华人中未获得诺贝尔奖的是（）。 A、莫言 B、杨振宁 C、钱学森 D、李政道我的答案：C 3 被称为“现代山寨机之父”，台湾的联发科技创始人是（）。 A、张兰 B、庄辰超 C、蔡明介 D、沈国军我的答案：C 4 中国文化中有非常大的“趋同”效应。（）我的答案：√ 5 相比较而言，在学习和工作方面犹太人用的时间比中国人更多。（）我的答案：× 陆向谦非常规自我实现方法与“Disruptive Theory”（下） 1 根据Disruptive theory，创新有（）。 A、Disruptive B、non Disruptive C、A和B都不对 D、A和B都选我的答案：D 2 “对真理的追求比对真理的占有更重要。”出自哪位名人（） A、马克思 B、恩格斯 C、霍金 D、爱因斯坦我的答案：D 3 按照时间，以下计算机出现的顺序正确的是（）。 A、中型机、mainframe、SGI、PC B、P C、中型机、mainframe、SGI C、mainframe、中型机、SGI、PC D、SGI、mainframe、中型机、PC 我的答案：C 4 Disruptive往往是在边缘上，而不在中心。我的答案：√ 5 任何一个大的成功，其背后创业的founder实际上都是一个常规自我实现的案例。我的答案：× 胡波与慈铭体检（一） 1 据相关数据统计，每隔4年，人的平均寿命就增加（）年。 A、.0 B、1.0 C、2.0 D、3.0 我的答案：B 2 胡波董事长所学的专业是（）。 A、营销学 B、心理学 C、管理学 D、医疗影像学我的答案：D 3 慈铭体检的董事长是（）。 A、郭建新 B、宋志平 C、胡波 D、修涞贵我的答案：C 4 胡波董事长是在清华读的硕士。（）我的答案：× 5 创业有好的合作伙伴是非常重要的。我的答案：√

大学生创业创新领导力

创业创新领导力 数字 1.1976——1983年期间曹德旺在高山玻璃厂担任什么职位()。A、办公司主任 B、厂长 C、采购员 D、运 输员我的答案：C 2.2001年刘强东团队与台湾集团价格战的销售产品是()。A、图书音响 B、服装 C、日用百货 D、光磁产 品我的答案：D 3.2004年1月京东创办“京东商城网”是京东商城的前身。我的答案：√刘强东与京东商城(三)已完成 4.Disruptive往往是在边缘上，而不在中心。我的答案：√ 5.Marissa Mayer离开google的时候，给其所有以前在google的部下发了一份信的主要目的是()。A、 道别 B、表示感谢 C、交接工作 D、拉拢人才我的答案：D 6.steve jobs年轻的时候是一个问题青年。我的答案：√手机游戏平台木瓜移动(五)已完成 7.tay hungry stay foolish出自哪位名人()。A、比尔盖茨 B、卡内基 C、霍金 D、Steve jobs 我 的答案：D 8.阿联酋是一个酋长国家，大学生毕业后()帮他们找工作。A、父母 B、个人 C、学校 D、政府我的 答案：D 3 以下国家不属于社会主义国家的是()。A、苏联 B、古巴 C、缅甸 D、越南我的答案：C 9.Wifi是一个局部的区域覆盖技术。正确答案：√ 我的答案：√答案解析： A 1.爱马仕其实是一个()名。A、地名 B、场所 C、人名 D、山名我的答案：C 2.按照时间，以下计算机出现的顺序正确的是()。A、中型机、mainframe、SGI、PC B、PC、中型机、mainframe、 SGI C、mainframe、中型机、SGI、PC D、SGI、mainframe、中型机、PC 我的答案：C B 1.被称为“现代山寨机之父”，台湾的联发科技创始人是()。A、张兰 B、庄辰超 C、蔡明介 D、沈国军 我的答案：C 2.比尔盖茨中学时功课很差。() 我的答案：×陆向谦非常规自我实现方法”与“创新创业执行力” 的互动讨论(二)已完成 1 农业社会的时候，农业是占整个经济的()。A、.3 B、.5 C、70%以上D、.2 我的答案：C C 1曹德旺“持戒行商”中的“戒”指的是遵纪守法。我的答案：√ 2曹德旺曾经借助字典和辞海读书。我的答案：√曹德旺与福耀玻璃(二)已完成 3曹德旺建议高校毕业生要调整自己的方向，早入企业。我的答案：√陆向谦非常规自我实现方法” 与“创新创业执行力”的互动讨论(一)已完成 4曹德旺捐的最大一笔钱给河南基金会，数额是()。A、十亿 B、八亿 C、三十亿 D、三十五亿我的答案：D 5曹德旺在中国的()个省有工厂有项目。A、十 B、八 C、十五 D、十一我的答案：D 6曹德旺在中国的()个省有工厂有项目;A、十B、八C、十五D、十一;我的答案：D;“ 7曹德旺在美国、巴西、英国、德国、瑞典、意大利、俄罗斯、日本、韩国、法国等国家都有企业。正确答案：× 8曹德旺做汽车玻璃开始只是为了跟日本人抗衡。我的答案：√曹德旺与福耀玻璃(三)已完成 9创业成功是常态，失败不是常态。我的答案：×