Data Sheet No. 1.1041
Series PVI5013R
Solid-State Opto-Isolated MOSFET Gate Driver
Dual-Channel
5V, 1.0μA
General Description
The PVI5013R Photovoltaic Isolator is a dual-channel, opto-isolated driver capable of directly driving gates of power MOSFETs or IGBT s. It utilizes a monolithic integrated circuit photovoltaic generator of novel construction as its output. The output is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator.
The PVI5013R is ideally suited for applications requiring high-current and/or high voltage switching with optical isolation between the low-level driving circuitry and high-energy or high-voltage load circuits. It can be used for directly driving gates of power MOSFETs. The dual-channel configuration allows its outputs to drive independent discrete power MOSFETs, or be connected in parallel or in series to provide higher-current drive for power MOSFETs or higher-voltage drive for IGBTs. PVI5013R employs a fast turn-off circuitry.
PVI5013R Photovoltaic Isolators are packaged in an 8-pin, molded DIP package with either thru-PVI5013R Features
Monolithic construction s
3,750 V
RMS
I/O isolation s 1,200 V
DC
output-to-output isolation s Dual-Channel application flexibility s
Solid-State reliability s UL and CSA certifications pending s
Part Identification
PVI5013R thru-hole
PVI5013RS SMT
PVI5013RS-T SMT, T&R
PHOTOVOLTAIC ISOLATOR
hole or “gull-wing” terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Refer to Part Identification information. Applications
Telecommunications s
Load Distribution s
Industrial Controls s Instrumentation and Measurement s
INPUT CHARACTERISTICS Limits Units Min. Input Current (See Fig.1) 5.0mA Input Current Range (See Fig. 1) 3.0 to 25mA Max. Continuous Input Current @ T A=+25°C40mA LED Forward Voltage Drop @ 5mA, T A=+25°C (See Fig. 3) 1.4V Max. Reverse Voltage7.0V Max. Reverse Current @ -7V DC, T A=+25°C10μA
OUTPUT CHARACTERISTICS Limits Units Min. Forward Voltage8.0V DC Max. Reverse Current10μA DC
COUPLED CHARACTERISTICS Limits Units Min. Output V oltage @ I LED = 5mA, R L=10M?3V
@ T A=0°C to +70°C (See Fig. 1 & 2)
Max. Output Voltage @ I LED = 5mA, R L = 10M?8V
@ T A=0°C to +70°C (See Fig. 1 & 2)
Max. V oltage Differential Between Outputs 1.0V
@ I LED = 5mA, R L = 10M?
Typical Output Short-Circuit Current 1.0μA @ I LED = 5mA, @ T A=+25°C (See Fig. 1 & 2)
Max. Turn-On Time @ I LED = 5mA, C LOAD =200pF (See Fig. 4)5ms Max. Turn-Off Time @ I LED = 5mA, C LOAD =200pF (See Fig. 4)0.25ms Off-State Clamping Resistance:minimum100?
maximum3300?
GENERAL CHARACTERISTICS Limits Units Min. Dielectric Strength, Input-Output3750V RMS Min. Dielectric Strength, Output-to-Output1200V DC Min. Insulation Resistance, Input-to-Output
12?
10
@T A=+25°C, 50%RH, 100V DC
Max. Capacitance, Input-Output 5.0pF Max. Pin Soldering T emperature (10 seconds max.)+260°C Ambient T emperature Range:Operating-40 to +85°C
Storage-40 to +125°C
Connection Diagram
Figure 1. Typical Output Characteristics
Figure 2. Typical Variation of Output
Figure 3. Input Characteristics (Current Controlled)
Figure 4. Typical Response Time
Load Capacitance (pF)
R e s p o n s e T i m e (m i c r o s e c o n d s )
100
200300400500
60-40
020*******
-20Ambient Temperature (deg. C)N o r m a l i z e d O u t p u t
0.50.60.7
0.8
0.9
1.0
1.1
1.2
Input Current (mA)
O u t p u t V o l t a g e (V D C )
I n p u t C u r r e n t (m A )
LED Forward Voltage Drop (Volts DC)16
20
12
8
4
O u t p u t S h o r t -C i r c u i t C u r r e n t (u A )
1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982
2.CONTROLLING DIMENSION: INCH
4DIMENSION DOES NOT INCLUDE MOLD PROTRUSIONS. MOLD PROTRUSIONS SHALL NOT EXCEED 0.25 (.010).
Mechanical Specifications
(Dimensions in millimeters (inches))
WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: (44) 0883 713215IR CANADA: 7321 Victoria Park Ave., Suite 201, Markham, Ontario L3R 3L1, Tel: (905) 475 1897
IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: 6172 37066
IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: (39) 1145 10111
IR FAR EAST: K&H Bldg., 2F, 3-30-4 Nishi-Ikeburo 3-Chome, Toshima-Ki, Tokyo 171 Tel: (03)3983 0641IR SOUTHEAST ASIA: 315 Outram Road, #10-02 Tan Boon Liat Building, Singapore 0316 Tel: 65 221 8371
http://www/https://www.wendangku.net/doc/8c9703200.html,/
Data and specifications subject to change without notice. 6/96
PVI5013R