PLC毕业设计的外文文献(及翻译)

PLC technique discussion and future development

T.J.byers

Electronic Test Equipment-principles and Applications

Princeton University .America

Along with the development of the ages, the technique that is nowadays is also gradually perfect, the competition plays more strong; the operation that list depends the artificial has already can't satisfied with the current manufacturing industry foreground, also can't guarantee the request of the higher quantity and high new the image of the technique business enterprise.

The people see in produce practice, automate brought the tremendous convenience and the product quantities for people up of assurance, also eased the personnel's labor strength, reduce the establishment on the personnel. The target control of the hard realization in many complicated production lines, whole and excellent turn, the best decision etc, well-trained operation work, technical personnel or expert, governor but can judge and operate easily, can acquire the satisfied result. The research target of the artificial intelligence makes use of the calculator exactly to carry out, imitate these intelligences behavior, moderating the work through person's brain and calculators, with the mode that person's machine combine, for resolve the very complicated problem to look for the best path.

We come in sight of the control that links after the electric appliances in various situation, that is already the that time generation past, now of after use in the mold a perhaps simple equipments of grass-roots control that the electric appliances can do for the low level only; And the PLC emergence also became the epoch-making topic, adding the vivid software control through a very and stable hardware, making the automation head for the new high tide.

The PLC biggest characteristics lie in: The electrical engineering teacher already no longer electric hardware up too many calculations of cost, as long as order the importation that the button switch or the importation of the sensors order to link the PLC up can solve problem, pass to output to order the conjunction contact machine or control the start equipments of the big power after the electric appliances, but the exportation equipments

direct conjunction of the small power can.

PLC internal containment have the CPU of the CPU, and take to have an I/ O for expand of exterior to connect a people's address and saving machine three big pieces to constitute, CPU core is from an or many is tired to add the machine to constitute, mathematics that they have the logic operation ability, and can read the procedure save the contents of the machine to drive the homologous saving machine and I/ Os to connect after pass the calculation; The I/ O add inner part is tired the input and output system of the machine and exterior link, and deposit the related data into the procedure saving machine or data saving machine; The saving machine can deposit the data that the I/ O input in the saving machine, and in work adjusting to become tired to add the machine and I/ Os to connect, saving machine separately saving machine RAM of the procedure saving machine ROM and dates, the ROM can do deposit of the data permanence in the saving machine, but RAM only for the CPU computes the temporary calculation usage of hour of buffer space.

The PLC anti- interference is very and excellent, our root need not concern its service life and the work situation bad, these all problems have already no longer become the topic that we fail, but stay to our is a concern to come to internal resources of make use of the PLC to strengthen the control ability of the equipments for us, make our equipments more gentle.

PLC language is not we imagine of edit collected materials the language or language of Cs to carry on weaving the distance, but the trapezoid diagram that the adoption is original after the electric appliances to control, make the electrical engineering teacher while weaving to write the procedure very easy comprehended the PLC language, and a lot of non- electricity professional also very quickly know and go deep into to the PLC.

Is PLC one of the advantage above and only, this is also one part that the people comprehend more and easily, in a lot of equipments, the people have already no longer hoped to see too many control buttons, they damage not only and easily and produce the artificial error easiest, small is not a main error perhaps you can still accept; But lead even is a fatal error greatly is what we can't is tolerant of. New technique always for bringing more safe and convenient operation for us, make we a lot of problems for face on sweep but light, do you understand the HMI? Says the HMI here you basically not clear what it is, also have no interest understanding, change one inside text explains it into the touch to hold or

man-machine interface you knew, it combines with the PLC to our larger space.

HMI the control not only is reduced the control press button, increase the vivid of the control, more main of it is can sequence of, and at can the change data input to output the feedback with data, control in the temperature curve of imitate but also can keep the manifestation of view to come out. And can write the function help procedure through a plait to provide the help of various what lies in one's power, the one who make operate reduces the otiose error. Currently the HMI factory is also more and more, the function is also more and more strong, the price is also more and more low, and the noodles of the usage are wide more and more. The HMI foreground can say that think to be good.

At a lot of situations, the list is a smooth movement that can't guarantee the equipments by the control of the single machine, but pass the information exchanges of the equipments and equipments to attain the result that we want. For example fore pack and the examination of the empress work preface, we will arrive wrapping information feedback to examine the place, and examine the information of the place to also want the feedback to packing. Pass the information share thus to make both the chain connect, becoming a total body, the match of your that thus make is more close, at each other attain to reflect the result that mutually flick.

The PLC correspondence has already come more body now its value, at the PLC and correspondence between Places, can pass the communication of the information and the share of the data’s to guarantee that of the equipments moderates mutually, the result that arrive already to repair with each other. Data conversion the adoption RS232 between PLC connect to come to the transmission data, but the RS232 pick up a people and can guarantee 10 meters only of deliver the distance, if in the distance of 1000 meters we can pass the RS485 to carry on the correspondence, the longer distance can pass the MODEL only to carry on deliver.

The PLC data transmission is just to be called a form to it in a piece of and continuous address that the data of the inner part delivers the other party, we, the PLC of the other party passes to read data in the watch to carry on the operation. If the data that data in the watch is a to establish generally, that is just the general data transmission, for example today of oil price rise, I want to deliver the price of the oil price to lose the oil ally on board, that is the share of the data; But take data in the watch for an instruction procedure that controls the PLC, that had the difficulty very much, for example you have to control one pedestal robot to press

the action work that you imagine, you will draw up for it the form that a procedure combine with the data sends out to pass by.

The form that information transport contain single work, the half a work and the difference of a workers .The meaning of the single work also is to say both, a can send out only, but a can receive only, for example a spy he can receive the designation of the superior only, but can't give the superior reply; A work of half is also 2 and can send out similar to accept the data, but can't send out and accept at the same time, for example when you make a phone call is to can't answer the phone, the other party also; But whole pair works is both can send out and accept the data, and can send out and accept at the same time. Be like the Internet is a typical example.

The process that information transport also has synchronous and different step cent: The data line and the clock lines are synchronous when synchronous meaning lie in sending out the data, is also the data signal and the clock signals to be carry on by the CPU to send out at the same time, this needs to all want the specialized clock signal each other to carry on the transmission and connect to send, and is constrained, the characteristics of this kind of method lies in its speed very quick, but correspond work time of take up the CPU and also want to be long oppositely, at the same time the technique difficulty also very big. Its request lies in canting have an error margins in a dates deliver, otherwise the whole piece according to compare the occurrence mistake, this on the hardware is a bigger difficulty. Applied more and more extensive in some appropriative equipments, be like the appropriative medical treatment equipments, the numerical signal equipments...etc., in compare the one data deliver, its result is very good.

And the different step is an application the most extensive, this receive benefit in it of technique difficulty is opposite and want to be small, at the same time not need to prepare the specialized clock signal, its characteristics to lie in, its data is partition, the long-lost send out and accept, be the CPU is too busy of time can grind to a stop sex to work, also reduced the difficulty on the hardware, the data throw to lose at the same time opposite want to be little, we can pass the examination of the data to observe whether the data that we send out has the mistake or not, be like strange accidentally the method, tired addition and eight efficacies method etc, can use to helps whether the data that we examine to send out have or not the

mistake occurrence, pass the feedback to carry on the discriminator.

A line of transmission of the information contains a string of and combines the cent of: The usual PLC is 8 machines, certainly also having 16 machines. We can be at the time of sending out the data a send out to the other party, also can be 88 send out the data to the other party, and 8 differentiations are also the as that we say to send out the data and combine sends out the data. A speed is more and slowly, but as long as 2 or three lines can solve problem, and can use the telephone line to carry on the long range control. But combine the ocular transmission speed is very quick of, it is a string of ocular of 25600%, occupy the advantage in the short distance, the in view of the fact TTL electricity is even, being limited by the scope of one meter generally, it combine unwell used for the data transmission of the long pull, thus the cost is too expensive.

Under a lot of circumstances we are total to like to adopt the string to combine the conversion chip to carry on deliver, under this kind of circumstance not need us to carry on to deposited the machine to establish too and complicatedly, but carry on the data exchanges through the data transmission instruction directly, but is not a very viable way in the correspondence, because the PLC of the other party must has been wait for your data exportation at the time of sending out the data, it can't do other works.

When you are reading the book, you hear someone knock on door, you stop to start up of affair, open the door and combine to continue with the one who knock on door a dialogue, the telephone of this time rang, you signal hint to connect a telephone, after connecting the telephone through, return overdo come together knock on door to have a conversation, after dialogue complete, you continue again to see your book, this kind of circumstance we are called the interruption to it, it has the authority, also having sex of have the initiative, the PLC had such function .Its characteristics lie in us and may meet the urgently abrupt affairs in the operation process of the equipments, we want to stop to start immediately up of work, the whereabouts manages the more important affair, this kind of circumstance is we usually meet of, PLC while carry out urgent mission, total will keep the current appearance first, for example the address of the procedure, CPU of tired add the machine data etc., be like to stick down which the book that we see is when we open the door the page or simply make a mark, because we treat and would still need to continue immediately after book of see the behind.

The CPU always does the affair that should do according to our will, but your mistake of give it an affair, it also would be same to do, this we must notice.

The interruption is not only a, sometimes existing jointly with the hour several inside break, break off to have the preferred Class, they will carry out the interruption of the higher Class according to person's request. This kind of breaks off the medium interruption to also became to break off the set. The Class that certainly breaks off is relevant according to various resources of CPU with internal PLC; also following a heap of capacity size of also relevant fasten.

The contents that break off has a lot of kinds, for example the exterior break off, correspondence in of send out and accept the interruption and settle and the clock that count break off, still have the WDT to reset the interruption etc., they enriched the CPU to respond to the category while handle various business. Speak thus perhaps you can't comprehend the internal structure and operation orders of the interruption completely also, we do a very small example to explain.

Each equipment always will not forget a button, it also is at we meet the urgent circumstance use of that is nasty to stop the button. When we meet the Human body trouble and surprised circumstances we as long as press it, the machine stops all operations immediately, and wait for processing the over surprised empress recover the operation again. Nasty stop the internal I/ O of the internal CPU of the button conjunction PLC to connect up, be to press button an exterior to trigger signal for CPU, the CPU carries on to the I/ O to examine again, being to confirm to have the exterior to trigger the signal, CPU protection the spot breaks off procedure counts the machine turn the homologous exterior I/ O automatically in the procedure to go to also, be exterior interruption procedure processing complete, the procedure counts the machine to return the main procedure to continue to work. Have 1:00 can what to explain is we generally would nasty stop the button of exterior break off to rise to the tallest Class, thus guarantee the safety.

When we are work a work piece, giving the PLC a signal, counting PLC inner part the machine add 1 to compute us for a day of workload, a count the machine and can solve problem in brief, certainly they also can keep the data under the condition of dropping the electricity, urging the data not to throw to lose, this is also what we hope earnestly.

The PLC still has the function that the high class counts the machine, being us while accept some dates of high speed, the high speed that here say is the data of the in all aspects tiny second class, for example the bar code scanner is scanning the data continuously, calculating high-speed signal of the data processor DSP etc., we will adopt the high class to count the machine to help we carry on count. It at the PLC carries out the procedure once discover that the high class counts the machine to should of interruption, will let go of the work on the hand immediately. The trapezoid diagram procedure that passes by to weave the distance again explains the high class for us to carry out procedure to count machine would automatic performance to should of work, thus rise the Class that the high class counts the machine to high one Class.

You heard too many this phrases perhaps:" crash", the meaning that is mostly is a workload of CPU to lead greatly, the internal resources shortage etc. the circumstance can't result in procedure circulate. The PLC also has the similar circumstance, there is a watchdog WDT in the inner part of PLC, we can establish time that a procedure of WDT circulate, being to appear the procedure to jump to turn the mistake in the procedure movement process or the procedure is busy, movement time of the procedure exceeds WDT constitution time, the CPU turn but the WDT reset the appearance. The procedure restarts the movement, but will not carry on the breakage to the interruption.

The PLC development has already entered for network ages of correspondence from the mode of the one, and together other works control the net plank and I/ O card planks to carry on the share easily. A state software can pass all se hardwires link, more animation picture of keep the view to carries on the control, and cans pass the Internet to carry on the control in the foreign land, the blast-off that is like the absolute being boat No.5 is to adopt this kind of way to make airship go up the sky.

The development of the higher layer needs our continuous effort to obtain. The PLC emergence has already affected a few persons fully, we also obtained more knowledge and precepts from the top one experience of the generation, coming to the continuous development PLC technique, push it toward higher wave tide.

可编程控制器技术讨论与未来发展

T.J.拜尔斯

（电子测试设备原理及应用普林斯顿大学）

随着时代的发展，当今的技术也日趋完善、竞争愈演愈烈；单靠人工的操作已不能满足于目前的制造业前景，也无法保证更高质量的要求和高新技术企业的形象。

人们在生产实践中看到，自动化给人们带来了极大的便利和产品质量上的保证，同时也减轻了人员的劳动强度，减少了人员上的编制。在许多复杂的生产过程中难以实现的目标控制、整体优化、最佳决策等，熟练的操作工、技术人员或专家、管理者却能够容易判断和操作，可以获得满意的效果。人工智能的研究目标正是利用计算机来实现、模拟这些智能行为，通过人脑与计算机协调工作，以人机结合的模式，为解决十分复杂的问题寻找最佳的途径。

我们在各种场合看到了继电器连接的控制，那已经是时代的过去，如今的继电器只能作为低端的基层控制模块或者简单的设备中使用到；而PLC的出现也成为了划时代的主题，通过极其稳定的硬件穿插灵活的软件控制，使得自动化走向了新的高潮。

PLC的最大特点在于：电气工程师已不再电气的硬件上花费太多的心计，只要将按钮开关或感应器的输入点连接到PLC的输入点上就能解决问题，通过输出点连接接触器或继电器来控制大功率的启动设备，而小功率的输出设备直接连接就可以。

PLC的内部包含了具有中央处理器的CPU，并带有外部I/O口扩展的I/O接口地址和存储器三大块组成，CPU的核心是由一个或者多个累加器组成，它们具有逻辑的数学运算能力，并能读取程序存储器的内容通过计算后去驱动相应的存储器和I/O接口；I/O 口将内部累加器和外部的输入和输出系统连接起来，并将相关的数据存入程序存储器或者数据存储器中；存储器可以将I/O口输入的数据存入存储器中，并在工作时调转到累加器和I/O接口上，存储器分程序存储器ROM和数据存储器RAM，ROM可以将数据永久的存入存储器中，而RAM只能作为CPU计算时临时计算使用的缓冲空间。

PLC的抗干扰是极其优秀的，我们根本不用去关心它的使用寿命和工作场合的恶劣，这些所有的问题已不再成为我们失败的主题，而留给我们的是关心如何来利用PLC的内部资源为我们加强设备的控制能力，使我们的设备更加的柔性。

PLC的语言并不是我们所想象的汇编语言或C语言来进行编程，而是采用原有的继电器控制的梯形图，使得电气工程师在编写程序时很容易就理解了PLC的语言，而且很

多的非电气专业人士也对PLC很快认识并深入。

以上仅仅是PLC的优点之一，这也是人们比较容易理解的一部分，在很多的设备中，人们已不再希望看到太多的控制按钮，它们不但容易损坏而且极易产生人为的失误，小的并不是主要的失误也许你还能够接受；但过大的甚至是致命的失误是我们无法容忍的。新的技术总是为了给我们带来更安全和便捷的操作，使得我们面临的一大堆问题一扫而光，你有了解过HMI吗？这里说HMI你根本不清楚它是什么，也没有兴趣了解，换一个中文把它说明为触摸屏或者人机界面你就知道了，它和PLC的结合给了我们更大的空间。

HMI控制不仅仅是减少了控制按钮，增加控制的灵活性，更主要的它是可顺序性的，而且在能够改变数据输入和数据输出反馈，在温度控制曲线的模拟也能直观的显示出来。并且能够通过编写功能帮助程序来提供各种力所能及的帮助，使得操作者减少不必要的失误。HMI的厂商目前也越来越多，功能也越来越强，价格也越来越低，使用的面越来越广。HMI的前景可以说十分的看好。

在很多场合，单靠单机的控制是无法保证设备的顺畅运行，而通过设备与设备的信息交流达到我们想要的效果。比如在前包装和后工序的检测，我们就要将包装的信息反馈到检测处，而检测处的信息也要反馈到包装来。这样通过信息共享来使得两者之间链接起来，形成一个共体，从而使的两者间的配合更加的紧密，在彼此间达到映影相挥的效果。

PLC的通信已经愈来愈体现它的价值，在PLC与PLC之间的通信，能够通过信息的沟通和数据的共享来保证设备之间的相互协调，已达到互补的效果。PLC之间的数据转换采用RS232接口来传送数据，而RS232接口只能保证10米的传输距离，如果在1000米的距离内我们可以通过RS485来进行通信，更长的距离只能通过MODEL来进行传输。

PLC的数据传送只是将内部的数据传送到对方的一块连续的地址中，我们把它称为一个表，对方的PLC通过读取表中的数据来进行操作。如果表中的数据是一个一般设置的数据的话，那只是一般的数据传送，比如今天的油价上升了，我要把油价的价格传送到所有的输油机上，那就是数据的共享；而当表中的数据是一段控制PLC的指令程序，那就很有难度了，比如你要控制一台机器人来按你想象的动作工作，你会给它编制一段程序并以数据的形式发送过去。

信息输送的形式有单工位、半双工位和全双工位的分别。单工位的意义也就是说两者之间，一个只能发送，而一个只能接收，比如一个特务他只能接收上司的指示，而无

法给上司回复；半双工位也就是两个能都能发送和接受数据，但不能同时发送和接受，比如你打电话时是不能接电话，对方也一样；而全双工位是两者之间都能发送和接受数据，并可同时发送和接受。像互联网就是典型的例子。

信息输送的过程也有同步和异步之分：同步的意义在于发送数据时数据线和时钟线是同步的，也就是数据信号和时钟信号同时由CPU进行发送，这需要彼此都要专门的时钟信号来进行传送和接送，并且是强制性的，这种方法的特点在于它的速度极快、但相应占用CPU的工作时间也相对的要长、同时技术难度也非常的大。它的要求在于在一帧的数据传送中不能有一位的误差，不然的话整个数据将发生错误，这在硬件上是一个比较大的难度。在一些专用的设备中应用的越来越广泛，像专用的医疗设备、数字信号设备等，在比较单一数据的传输中，它的效果非常的好。

而异步是应用范围最广泛的，这得益于它的技术难度相对要小、同时不需要配制专门的时钟信号、它的特点在于，它的数据是间隔性的，离散性的发送和接受，当CPU太忙的时候可以停顿性去工作，在硬件上也减少了难度，同时数据的丢失相对要少，我们可以通过数据的检测来观察我们发送的数据是否有错误，像奇偶法、累加法和八位效验法等，都可以用来帮助我们检测发送的数据是否有错误发生，通过反馈来进行辨别。

信息的传送口线有串口和并口之分：通常的PLC是8位机，当然也有16位机。我们在发送数据的时候可以是一位一位的发送给对方，也可以8位8位的将数据发送到对方，一位和8位区别也就是我们所说的串口发送数据和并口发送数据。串口速度比较慢，但只要两条或者三条口线就能解决问题，并能借用电话线来进行远程控制。而并口的传送速度是极快的，它是串口的256倍，在短距离占有优势，由于是TTL电平，一般限于1米的范围，它并不适用于长距离的数据传送，这样成本太昂贵了。

很多的情况下我们总喜欢采用串并转换芯片来进行传输，这种情况下不需要我们进行过于复杂的寄存器设置了，而直接通过数据传送指令进行数据交流，但在通信中并不是一个十分可行的办法，因为在发送数据的时候对方的PLC必须一直等待你的数据输出，它不能去做其他的工作。

当你在看书的时候，你听到有人敲门、你停下手上的事情、去打开门、并同敲门者对话、这个时候电话响了、你示意接个电话、在接完电话后、回过头来同敲门者继续对话、对话完毕后、你再继续看你的书，这种情况我们把它称为中断，它具有权威性，也具有优先性，PLC具备了这样的功能。它的特点在于我们在设备的操作过程中可能会遇到紧急的突发事件，我们要立刻的停下手上的工作，去处理更重要的事情，这种情况是

我们经常所遇到的，PLC在去执行紧急的任务时，总会先保存目前的状态，比如程序的地址，CPU的累加器数据等，就像我们去开门时要记下我们看的书在第几页了或者干脆作个记号，因为我们待会还要继续接着看后面的书。CPU总是按照我们的意愿去做应该做的事情，但你错误的给它一件事情，它也会同样的去做，这一点我们必须注意。

中断并不是只有一个，有时会同时存在几个中断，中断具有优先的级别，他们会根据人的要求去执行更高级别的中断。这种中断中的中断也就形成了中断嵌套。当然中断的级别根据各种PLC内部CPU的资源有关，同时也跟堆栈的容量大小也有关系。

中断的内容有很多种，比如外部中断、通信中的发送和接受中断、定时和计数的时钟中断、还有WDT复位中断等，它们丰富了CPU在处理各种事务时响应种类。这样讲也许你并不能完全理解中断的内部结构和操作顺序，我们做一个小小的例子来说明。

每一个设备总是不会忘记有一个按钮，它也是在我们遇到紧急情况时使用的，那就是急停按钮。当我们遇到人身事故和意外情况时我们只要按下它，机器立即停止所有的操作，并等待处理完意外后再恢复操作。急停按钮连接PLC内部CPU的内部I/O接口上，当按钮给CPU一个外部触发信号时，CPU对I/O进行再次检测，当确认有外部触发信号时，CPU保护现场并将程序计数器自动转到相应的外部I/O中断程序中去，当外部中断程序处理完毕，程序计数器返回到主程序继续工作。有一点可以说明的是我们一般会把急停按钮的外部中断升至最高级别，从而保证安全。

当我们在工作完一个工件时，给PLC一个信号，将PLC的内部计数器加1来计算我们一天的工作量时，一个简单的计数器能解决问题，当然它们也能够在掉电的情况下保持数据，促使数据不丢失，这也是我们所渴望的。

PLC还具有高级计数器的功能，当我们在接受一些高速的数据时，这里所说的高速是在在微秒级的数据，比如条码扫描机在不断的扫描数据，数据处理器DSP计算的高速信号等，我们就要采用到高级计数器来帮助我们进行计数。它在PLC执行程序时一旦发现高级计数器对应的中断，就会立即放下手上的工作。经过再次编程的梯形图程序说明我们在执行程序时高级计数器会自动的执行对应的工作，从而将高级计数器的级别升至高一级别。

你也许听过太多的这个词:“死机”，大致的意思是CPU工作量过大，内部资源不足等情况造成程序无法运行。PLC也有类似的情况，在PLC内部有一个看门狗WDT，我们可以设置WDT一个程序运行的时间，当程序运行过程中出现程序跳转错误时或者程序繁忙时，程序的运行时间超过WDT的设置时间，CPU转而WDT复位状态。程序重新开始运

行，但对中断不会进行破坏。

PLC的发展已经从单一的模式进入了通信的网络时代，并同其它的工控网板和I/O 卡板轻易的进行共享。组态软件可以将所有的这些硬件连接起来，通过更直观的动画图片来进行控制，并可以通过互联网在异地进行控制，像神舟五号的发射就是采用这种办法来使飞船升空。

更高层次的发展需要我们不断的努力来取得。PLC的出现已经足足影响了几代人，我们也从上一辈的经验中获取了更多的知识和教训，来不断的发展PLC技术，将它推向更高浪潮。

毕业设计外文翻译资料

外文出处： 《Exploiting Software How to Break Code》By Greg Hoglund, Gary McGraw Publisher : Addison Wesley Pub Date : February 17, 2004 ISBN : 0-201-78695-8 译文标题： JDBC接口技术 译文： JDBC是一种可用于执行SQL语句的JavaAPI（ApplicationProgrammingInterface应用程序设计接口）。它由一些Java语言编写的类和界面组成。JDBC为数据库应用开发人员、数据库前台工具开发人员提供了一种标准的应用程序设计接口，使开发人员可以用纯Java语言编写完整的数据库应用程序。 一、ODBC到JDBC的发展历程 说到JDBC，很容易让人联想到另一个十分熟悉的字眼“ODBC”。它们之间有没有联系呢？如果有，那么它们之间又是怎样的关系呢？ ODBC是OpenDatabaseConnectivity的英文简写。它是一种用来在相关或不相关的数据库管理系统（DBMS）中存取数据的，用C语言实现的，标准应用程序数据接口。通过ODBCAPI，应用程序可以存取保存在多种不同数据库管理系统（DBMS）中的数据，而不论每个DBMS使用了何种数据存储格式和编程接口。 1．ODBC的结构模型 ODBC的结构包括四个主要部分：应用程序接口、驱动器管理器、数据库驱动器和数据源。应用程序接口：屏蔽不同的ODBC数据库驱动器之间函数调用的差别，为用户提供统一的SQL编程接口。 驱动器管理器：为应用程序装载数据库驱动器。 数据库驱动器：实现ODBC的函数调用，提供对特定数据源的SQL请求。如果需要，数据库驱动器将修改应用程序的请求，使得请求符合相关的DBMS所支持的文法。 数据源：由用户想要存取的数据以及与它相关的操作系统、DBMS和用于访问DBMS的网络平台组成。 虽然ODBC驱动器管理器的主要目的是加载数据库驱动器，以便ODBC函数调用，但是数据库驱动器本身也执行ODBC函数调用，并与数据库相互配合。因此当应用系统发出调用与数据源进行连接时，数据库驱动器能管理通信协议。当建立起与数据源的连接时，数据库驱动器便能处理应用系统向DBMS发出的请求，对分析或发自数据源的设计进行必要的翻译，并将结果返回给应用系统。 2．JDBC的诞生 自从Java语言于1995年5月正式公布以来，Java风靡全球。出现大量的用java语言编写的程序，其中也包括数据库应用程序。由于没有一个Java语言的API，编程人员不得不在Java程序中加入C语言的ODBC函数调用。这就使很多Java的优秀特性无法充分发挥，比如平台无关性、面向对象特性等。随着越来越多的编程人员对Java语言的日益喜爱，越来越多的公司在Java程序开发上投入的精力日益增加，对java语言接口的访问数据库的API 的要求越来越强烈。也由于ODBC的有其不足之处，比如它并不容易使用，没有面向对象的特性等等，SUN公司决定开发一Java语言为接口的数据库应用程序开发接口。在JDK1．x 版本中，JDBC只是一个可选部件，到了JDK1．1公布时，SQL类包（也就是JDBCAPI）

毕业设计外文翻译格式实例.

理工学院毕业设计(论文)外文资料翻译 专业：热能与动力工程 姓名：赵海潮 学号：09L0504133 外文出处：Applied Acoustics, 2010(71):701~707 附件： 1.外文资料翻译译文；2.外文原文。

附件1：外文资料翻译译文 基于一维CFD模型下汽车排气消声器的实验研究与预测Takeshi Yasuda, Chaoqun Wua, Noritoshi Nakagawa, Kazuteru Nagamura 摘要目前，利用实验和数值分析法对商用汽车消声器在宽开口喉部加速状态下的排气噪声进行了研究。在加热工况下发动机转速从1000转/分钟加速到6000转/分钟需要30秒。假定其排气消声器的瞬时声学特性符合一维计算流体力学模型。为了验证模拟仿真的结果，我们在符合日本工业标准（JIS D 1616）的消声室内测量了排气消声器的瞬态声学特性，结果发现在二阶发动机转速频率下仿真结果和实验结果非常吻合。但在发动机高阶转速下（从5000到6000转每分钟的四阶转速，从4200到6000转每分钟的六阶转速这样的高转速范围内），计算结果和实验结果出现了较大差异。根据结果分析，差异的产生是由于在模拟仿真中忽略了流动噪声的影响。为了满足市场需求，研究者在一维计算流体力学模型的基础上提出了一个具有可靠准确度的简化模型，相对标准化模型而言该模型能节省超过90％的执行时间。 关键字消声器排气噪声优化设计瞬态声学性能 1 引言 汽车排气消声器广泛用于减小汽车发动机及汽车其他主要部位产生的噪声。一般而言，消声器的设计应该满足以下两个条件：（1）能够衰减高频噪声，这是消声器的最基本要求。排气消声器应该有特定的消声频率范围，尤其是低频率范围，因为我们都知道大部分的噪声被限制在发动机的转动频率和它的前几阶范围内。（2）最小背压，背压代表施加在发动机排气消声器上额外的静压力。最小背压应该保持在最低限度内，因为大的背压会降低容积效率和提高耗油量。对消声器而言，这两个重要的设计要求往往是互相冲突的。对于给定的消声器，利用实验的方法，根据距离尾管500毫米且与尾管轴向成45°处声压等级相近的排气噪声来评估其噪声衰减性能，利用压力传感器可以很容易地检测背压。 近几十年来，在预测排气噪声方面广泛应用的方法有：传递矩阵法、有限元法、边界元法和计算流体力学法。其中最常用的方法是传递矩阵法（也叫四端网络法）。该方

毕业设计(论文)外文文献译文

毕业设计（论文） 外文文献译文及原文 学生：李树森 学号：201006090217 院（系）：电气与信息工程学院 专业：网络工程 指导教师：王立梅 2014年06月10日

JSP的技术发展历史 作者：Kathy Sierra and Bert Bates 来源：Servlet&JSP Java Server Pages(JSP)是一种基于web的脚本编程技术，类似于网景公司的服务器端Java脚本语言—— server-side JavaScript(SSJS)和微软的Active Server Pages(ASP)。与SSJS和ASP相比，JSP具有更好的可扩展性，并且它不专属于任何一家厂商或某一特定的Web服务器。尽管JSP规范是由Sun 公司制定的，但任何厂商都可以在自己的系统上实现JSP。 在Sun正式发布JSP之后，这种新的Web应用开发技术很快引起了人们的关注。JSP为创建高度动态的Web应用提供了一个独特的开发环境。按照Sun的说法，JSP能够适应市场上包括Apache WebServer、IIS4.0在内的85%的服务器产品。 本文将介绍JSP相关的知识，以及JavaBean的相关内容，当然都是比较粗略的介绍其中的基本内容，仅仅起到抛砖引玉的作用，如果读者需要更详细的信息，请参考相应的JSP的书籍。 1.1 概述 JSP(Java Server Pages)是由Sun Microsystems公司倡导、许多公司参与一起建立的一种动态网页技术标准，其在动态网页的建设中有其强大而特别的功能。JSP与Microsoft的ASP技术非常相似。两者都提供在HTML代码中混合某种程序代码、由语言引擎解释执行程序代码的能力。下面我们简单的对它进行介绍。 JSP页面最终会转换成servlet。因而，从根本上，JSP页面能够执行的任何任务都可以用servlet 来完成。然而，这种底层的等同性并不意味着servlet和JSP页面对于所有的情况都等同适用。问题不在于技术的能力，而是二者在便利性、生产率和可维护性上的不同。毕竟，在特定平台上能够用Java 编程语言完成的事情，同样可以用汇编语言来完成，但是选择哪种语言依旧十分重要。 和单独使用servlet相比，JSP提供下述好处： JSP中HTML的编写与维护更为简单。JSP中可以使用常规的HTML：没有额外的反斜杠，没有额外的双引号，也没有暗含的Java语法。 能够使用标准的网站开发工具。即使是那些对JSP一无所知的HTML工具，我们也可以使用，因为它们会忽略JSP标签。 可以对开发团队进行划分。Java程序员可以致力于动态代码。Web开发人员可以将经理集中在表示层上。对于大型的项目，这种划分极为重要。依据开发团队的大小，及项目的复杂程度，可以对静态HTML和动态内容进行弱分离和强分离。 此处的讨论并不是说人们应该放弃使用servlet而仅仅使用JSP。事实上，几乎所有的项目都会同时用到这两种技术。在某些项目中，更适宜选用servlet，而针对项目中的某些请求，我们可能会在MVC构架下组合使用这两项技术。我们总是希望用适当的工具完成相对应的工作，仅仅是servlet并不一定能够胜任所有工作。 1.2 JSP的由来 Sun公司的JSP技术，使Web页面开发人员可以使用HTML或者XML标识来设计和格式化最终

软件开发概念和设计方法大学毕业论文外文文献翻译及原文

毕业设计（论文）外文文献翻译 文献、资料中文题目：软件开发概念和设计方法文献、资料英文题目： 文献、资料来源： 文献、资料发表（出版）日期： 院（部）： 专业： 班级： 姓名： 学号： 指导教师： 翻译日期： 2017.02.14

外文资料原文 Software Development Concepts and Design Methodologies During the 1960s, ma inframes and higher level programming languages were applied to man y problems including human resource s yste ms,reservation s yste ms, and manufacturing s yste ms. Computers and software were seen as the cure all for man y bu siness issues were some times applied blindly. S yste ms sometimes failed to solve the problem for which the y were designed for man y reasons including: ?Inability to sufficiently understand complex problems ?Not sufficiently taking into account end-u ser needs, the organizational environ ment, and performance tradeoffs ?Inability to accurately estimate development time and operational costs ?Lack of framework for consistent and regular customer communications At this time, the concept of structured programming, top-down design, stepwise refinement，and modularity e merged. Structured programming is still the most dominant approach to software engineering and is still evo lving. These failures led to the concept of "software engineering" based upon the idea that an engineering-like discipl ine could be applied to software design and develop ment. Software design is a process where the software designer applies techniques and principles to produce a conceptual model that de scribes and defines a solution to a problem. In the beginning, this des ign process has not been well structured and the model does not alwa ys accurately represent the problem of software development. However,design methodologies have been evolving to accommo date changes in technolog y coupled with our increased understanding of development processes. Whereas early desig n methods addressed specific aspects of the

毕业论文外文翻译模板

农村社会养老保险的现状、问题与对策研究社会保障对国家安定和经济发展具有重要作用，“城乡二元经济”现象日益凸现，农村社会保障问题客观上成为社会保障体系中极为重要的部分。建立和完善农村社会保障制度关系到农村乃至整个社会的经济发展，并且对我国和谐社会的构建至关重要。我国农村社会保障制度尚不完善，因此有必要加强对农村独立社会保障制度的构建，尤其对农村养老制度的改革，建立健全我国社会保障体系。从户籍制度上看，我国居民养老问题可分为城市居民养老和农村居民养老两部分。对于城市居民我国政府已有比较充足的政策与资金投人，使他们在物质和精神方面都能得到较好地照顾，基本实现了社会化养老。而农村居民的养老问题却日益突出，成为摆在我国政府面前的一个紧迫而又棘手的问题。 一、我国农村社会养老保险的现状 关于农村养老，许多地区还没有建立农村社会养老体系，已建立的地区也存在很多缺陷，运行中出现了很多问题，所以完善农村社会养老保险体系的必要性与紧迫性日益体现出来。 （一）人口老龄化加快 随着城市化步伐的加快和农村劳动力的输出，越来越多的农村青壮年人口进入城市，年龄结构出现“两头大，中间小”的局面。中国农村进入老龄社会的步伐日渐加快。第五次人口普查显示：中国65岁以上的人中农村为5938万，占老龄总人口的67.4%.在这种严峻的现实面前，农村社会养老保险的徘徊显得极其不协调。 （二）农村社会养老保险覆盖面太小 中国拥有世界上数量最多的老年人口，且大多在农村。据统计，未纳入社会保障的农村人口还很多，截止2000年底，全国7400多万农村居民参加了保险，占全部农村居民的11.18%，占成年农村居民的11.59%.另外，据国家统计局统计，我国进城务工者已从改革开放之初的不到200万人增加到2003年的1.14亿人。而基本方案中没有体现出对留在农村的农民和进城务工的农民给予区别对待。进城务工的农民既没被纳入到农村养老保险体系中，也没被纳入到城市养老保险体系中，处于法律保护的空白地带。所以很有必要考虑这个特殊群体的养老保险问题。

本科毕业设计方案外文翻译范本

I / 11 本科毕业设计外文翻译 <2018届） 论文题目基于WEB 的J2EE 的信息系统的方法研究 作者姓名[单击此处输入姓名] 指导教师[单击此处输入姓名] 学科(专业 > 所在学院计算机科学与技术学院 提交日期[时间 ]

基于WEB的J2EE的信息系统的方法研究 摘要：本文介绍基于工程的Java开发框架背后的概念，并介绍它如何用于IT 工程开发。因为有许多相同设计和开发工作在不同的方式下重复，而且并不总是符合最佳实践，所以许多开发框架建立了。我们已经定义了共同关注的问题和应用模式，代表有效解决办法的工具。开发框架提供：<1）从用户界面到数据集成的应用程序开发堆栈；<2）一个架构，基本环境及他们的相关技术，这些技术用来使用其他一些框架。架构定义了一个开发方法，其目的是协助客户开发工程。 关键词：J2EE 框架WEB开发 一、引言 软件工具包用来进行复杂的空间动态系统的非线性分析越来越多地使用基于Web的网络平台，以实现他们的用户界面，科学分析，分布仿真结果和科学家之间的信息交流。对于许多应用系统基于Web访问的非线性分析模拟软件成为一个重要组成部分。网络硬件和软件方面的密集技术变革[1]提供了比过去更多的自由选择机会[2]。因此，WEB平台的合理选择和发展对整个地区的非线性分析及其众多的应用程序具有越来越重要的意义。现阶段的WEB发展的特点是出现了大量的开源框架。框架将Web开发提到一个更高的水平，使基本功能的重复使用成为可能和从而提高了开发的生产力。 在某些情况下，开源框架没有提供常见问题的一个解决方案。出于这个原因，开发在开源框架的基础上建立自己的工程发展框架。本文旨在描述是一个基于Java的框架，该框架利用了开源框架并有助于开发基于Web的应用。通过分析现有的开源框架，本文提出了新的架构，基本环境及他们用来提高和利用其他一些框架的相关技术。架构定义了自己开发方法，其目的是协助客户开发和事例工程。 应用程序设计应该关注在工程中的重复利用。即使有独特的功能要求，也

毕业设计外文翻译-中文版

本科生毕业设计（论文）外文科技文献译文 译文题目(外文题目)学院(系)Socket网络编程的设计与实现A Design and Implementation of Active Network Socket Programming 机械与能源工程学院 专学业 号 机械设计制造及其自动化 071895 学生姓名李杰林 日期2012年5月27日指导教师签名日期

摘要：编程节点和活跃网络的概念将可编程性引入到通信网络中，并且代码和数据可以在发送过程中进行修改。最近，多个研究小组已经设计和实现了自己的设计平台。每个设计都有其自己的优点和缺点，但是在不同平台之间都存在着互操作性问题。因此，我们引入一个类似网络socket编程的概念。我们建立一组针对应用程序进行编程的简单接口，这组被称为活跃网络Socket编程（ANSP）的接口，将在所有执行环境下工作。因此，ANSP 提供一个类似于“一次性编写，无限制运行”的开放编程模型，它可以工作在所有的可执行环境下。它解决了活跃网络中的异构性，当应用程序需要访问异构网络内的所有地区，在临界点部署特殊服务或监视整个网络的性能时显得相当重要。我们的方案是在现有的环境中，所有应用程序可以很容易地安装上一个薄薄的透明层而不是引入一个新的平台。 关键词：活跃网络；应用程序编程接口；活跃网络socket编程

1 导言 1990年，为了在互联网上引入新的网络协议，克拉克和藤农豪斯[1]提出了一种新的设 计框架。自公布这一标志性文件，活跃网络设计框架[2，3，10]已经慢慢在20世纪90 年代末成形。活跃网络允许程序代码和数据可以同时在互联网上提供积极的网络范式，此外，他们可以在传送到目的地的过程中得到执行和修改。ABone作为一个全球性的骨干网络，开 始进行活跃网络实验。除执行平台的不成熟，商业上活跃网络在互联网上的部署也成为主要障碍。例如，一个供应商可能不乐意让网络路由器运行一些可能影响其预期路由性能的未知程序，。因此，作为替代提出了允许活跃网络在互联网上运作的概念，如欧洲研究课题组提出的应用层活跃网络（ALAN）项目[4]。 在ALAN项目中，活跃服务器系统位于网络的不同地址，并且这些应用程序都可以运行在活跃系统的网络应用层上。另一个潜在的方法是网络服务提供商提供更优质的活跃网络服务类。这个服务类应该提供最优质的服务质量（QOS），并允许路由器对计算机的访问。通过这种方法，网络服务提供商可以创建一个新的收入来源。 对活跃网络的研究已取得稳步进展。由于活跃网络在互联网上推出了可编程性，相应 地应建立供应用程序工作的可执行平台。这些操作系统平台执行环境（EES），其中一些已 被创建，例如，活跃信号协议（ASP）[12]和活跃网络传输系统（ANTS）[11]。因此，不 同的应用程序可以实现对活跃网络概念的测试。 在这些EES 环境下，已经开展了一系列验证活跃网络概念的实验，例如，移动网络[5]，网页代理[6]，多播路由器[7]。活跃网络引进了很多在网络上兼有灵活性和可扩展性的方案。几个研究小组已经提出了各种可通过路由器进行网络计算的可执行环境。他们的成果和现有基础设施的潜在好处正在被评估[8，9]。不幸的是，他们很少关心互操作性问题，活跃网络由多个执行环境组成，例如，在ABone 中存在三个EES，专为一个EES编写的应用程序不能在其他平台上运行。这就出现了一种资源划分为不同运行环境的问题。此外，总是有一些关键的网络应用需要跨环境运行，如信息收集和关键点部署监测网络的服务。 在本文中，被称为活跃网络Socket编程（ANSP）的框架模型，可以在所有EES下运行。它提供了以下主要目标： ??通过单一编程接口编写应用程序。 由于ANSP提供的编程接口，使得EES的设计与ANSP 独立。这使得未来执行环境的发展和提高更加透明。

毕业设计_英语专业论文外文翻译

1. Introduction America is one of the countries that speak English. Because of the special North American culture, developing history and the social environment, American English has formed its certain unique forms and the meaning. Then it turned into American English that has the special features of the United States. American English which sometimes also called United English or U.S English is the form of the English language that used widely in the United States .As the rapid development of American economy, and its steady position and strong power in the world, American English has become more and more widely used. As in 2005, more than two-thirds of English native speakers use various forms of American English. The philologists of the United States had divided the English of the United States into four major types: “America n creating”; “Old words given the new meaning”; “Words that eliminated by English”;“The phonetic foreign phrases and the languages that are not from the English immigrates”[1]. Compared to the other languages, American English is much simple on word spelling, usage and grammar, and it is one of the reasons that American English is so popular in the world. The thesis analyzes the differences between American English and British English. With the main part, it deals with the development of American English, its peculiarities compared to that of British English, its causes and tendency. 2. Analyses the Differences As we English learners, when we learning English in our junior or senior school, we already came across some words that have different spellings, different pronunciations or different expressions, which can be represented by following contrasted words: spellings in "color" vs. "colour"; pronunciations in "sec-re-ta-ry" vs. "sec-re-try";

毕业设计英文资料翻译

毕业设计英文资料翻译 篇一：毕业设计(论文)外文资料与译文 大连东软信息学院高等教育自学考试毕业设计（论文）外文资料及译文 姓名： 准考证号： 专业： 助学单位： 大连东软信息学院 Dalian Neusoft University of Information张校辉020*********项目管理大连东软信息学院继续教育学院外文资料和译文格式要求 一、装订要求 1、外文资料原文（复印或打印）在前、译文在后、最后为指导教师评定成绩。 2、译文必须采用计算机输入、打印。 3、A4幅面打印，于左侧装订。 二、撰写要求 1、外文文献内容与所选课题相关。 2、译文汉字字数不少于3000字。 三、格式要求 1、译文字号：中文小四号宋体，英文小四号“Times New

Roman”字型，全文统一，首行缩进2个中文字符，1.5倍行距。 2、译文页码：页码用阿拉伯数字连续编页，字体采用“Times New Roman”字体，字号小五，页底居中。 3、译文页眉：眉体使用单线，页眉说明五号宋体，居中“大连东软信息学院高等教育自学考试毕业设计（论文）译文”。 -1- -2- -3- 篇二：毕业设计外文资料翻译 毕业设计外文资料翻译 题目静压轴承密封件的水压特性水泵和电机学院专业机械工程及自动化 班级 学生王道国 学号指导教师王栋梁 二〇一三年六月五日 济南大学毕业设计外文资料翻译 静压轴承/密封件的水压特性水泵和电机。第1部分：理 论和实验

X 王 A山口 横滨国立大学工学部，日本横滨240-8501 XX年11月26日，在修订后的XX年2月25日收到XX 年3月7日接受 摘要 在这项研究中，磁盘型静压推力轴承的特性支承同心的负载，模拟的主要水液压泵和马达， 轴承/密封件。该轴承是由不锈钢，钢/不锈钢和不锈钢/塑料组成。通过研究作为载荷之间的关 系的特性进行评估容量，口袋压力，膜厚，泄漏流率。对于弹性材料的杨氏模量是一个非线性应 力作用在密封件上表面和压缩应变之间的关系。的承载能力所表示的比例流体静力平衡不是只依 XX Elsevier科学有限公司版权所有 关键词：静压推力轴承，喷嘴，不锈钢，热塑性弹性变形，承载能力，水液压泵和马达 1介绍 近年来，已经引起了水的液压系统主要的兴趣，因为他们的特点是用户友好和环 境安全。他们有很多优势，因为它们是无公害，无火灾造成风险，成本低，并提供高

本科毕业设计外文翻译

Section 3 Design philosophy, design method and earth pressures 3.1 Design philosophy 3.1.1 General The design of earth retaining structures requires consideration of the interaction between the ground and the structure. It requires the performance of two sets of calculations: 1）a set of equilibrium calculations to determine the overall proportions and the geometry of the structure necessary to achieve equilibrium under the relevant earth pressures and forces; 2）structural design calculations to determine the size and properties of thestructural sections necessary to resist the bending moments and shear forces determined from the equilibrium calculations. Both sets of calculations are carried out for specific design situations (see 3.2.2) in accordance with the principles of limit state design. The selected design situations should be sufficiently Severe and varied so as to encompass all reasonable conditions which can be foreseen during the period of construction and the life of the retaining wall. 3.1.2 Limit state design This code of practice adopts the philosophy of limit state design. This philosophy does not impose upon the designer any special requirements as to the manner in which the safety and stability of the retaining wall may be achieved, whether by overall factors of safety, or partial factors of safety, or by other measures. Limit states (see 1.3.13) are classified into: a) ultimate limit states (see 3.1.3); b) serviceability limit states (see 3.1.4). Typical ultimate limit states are depicted in figure 3. Rupture states which are reached before collapse occurs are, for simplicity, also classified and

毕业设计外文翻译原文

编号： 毕业设计(论文)外文翻译 （原文） 院（系）：应用科技学院 专业：机械设计制造及其自动化 学生姓名：邓瑜 学号：0501120501 指导教师单位：应用科技学院 姓名：黄小能 职称： 2009年 5 月20 日

The Injection Molding The Introduction of Molds The mold is at the core of a plastic manufacturing process because its cavity gives a part its shape. This makes the mold at least as critical-and many cases more so-for the quality of the end product as, for example, the plasticiting unit or other components of the processing equipment. Mold Material Depending on the processing parameters for the various processing methods as well as the length of the production run, the number of finished products to be produced, molds for plastics processing must satisfy a great variety of requirements. It is therefore not surprising that molds can be made from a very broad spectrum of materials, including-from a technical standpoint-such exotic materials as paper matched and plaster. However, because most processes require high pressures, often combined with high temperatures, metals still represent by far the most important material group, with steel being the predominant metal. It is interesting in this regard that, in many cases, the selection of the mold material is not only a question of material properties and an optimum price-to-performance ratio but also that the methods used to produce the mold, and thus the entire design, can be influenced. A typical example can be seen in the choice between cast metal molds, with their very different cooling systems, compared to machined molds. In addition, the production technique can also have an effect; for instance, it is often reported that, for the sake of simplicity, a prototype mold is frequently machined from solid stock with the aid of the latest technology such as computer-aided (CAD) and computer-integrated manufacturing (CIM). In contrast to the previously used methods based on the use of patterns, the use of CAD and CAM often represents the more economical solution today, not only because this production capability is available pin-house but also because with any other technique an order would have to be placed with an outside supplier. Overall, although high-grade materials are often used, as a rule standard materials are used in mold making. New, state-of-the art (high-performance) materials, such as ceramics, for instance, are almost completely absent. This may be related to the fact that their desirable characteristics, such as constant properties up to very high temperatures, are not required on molds, whereas their negative characteristics, e. g. low tensile strength and poor thermal conductivity, have a clearly related to ceramics, such as sintered material, is found in mild making only to a limited degree. This refers less to the modern materials and components

抛光瓷砖毕业设计外文文献翻译

毕业设计外文资料翻译 题目POLISHING OF CERAMIC TILES 抛光瓷砖 学院材料科学与工程 专业复合材料与工程 班级 学生 学号 指导教师 二〇一二年三月二十八日

MATERIALS AND MANUFACTURING PROCESSES, 17(3), 401–413 (2002) POLISHING OF CERAMIC TILES C. Y. Wang,* X. Wei, and H. Yuan Institute of Manufacturing Technology, Guangdong University ofTechnology, Guangzhou 510090, P.R. China ABSTRACT Grinding and polishing are important steps in the production of decorative vitreous ceramic tiles. Different combinations of finishing wheels and polishing wheels are tested to optimize their selection. The results show that the surface glossiness depends not only on the surface quality before machining, but also on the characteristics of the ceramic tiles as well as the performance of grinding and polishing wheels. The performance of the polishing wheel is the key for a good final surface quality. The surface glossiness after finishing must be above 208 in order to get higher polishing quality because finishing will limit the maximum surface glossiness by polishing. The optimized combination of grinding and polishing wheels for all the steps will achieve shorter machining times and better surface quality. No obvious relationships are found between the hardness of ceramic tiles and surface quality or the wear of grinding wheels; therefore, the hardness of the ceramic tile cannot be used for evaluating its machinability. Key Words: Ceramic tiles; Grinding wheel; Polishing wheel

java毕业论文外文文献翻译

Advantages of Managed Code Microsoft intermediate language shares with Java byte code the idea that it is a low-level language witha simple syntax , which can be very quickly translated intonative machine code. Having this well-defined universal syntax for code has significant advantages. Platform independence First, it means that the same file containing byte code instructions can be placed on any platform; atruntime the final stage of compilation can then be easily accomplished so that the code will run on thatparticular platform. In other words, by compiling to IL we obtain platform independence for .NET, inmuch the same way as compiling to Java byte code gives Java platform independence. Performance improvement IL is actually a bit more ambitious than Java bytecode. IL is always Just-In-Time compiled (known as JIT), whereas Java byte code was ofteninterpreted. One of the disadvantages of Java was that, on execution, the process of translating from Javabyte code to native executable resulted in a loss of performance. Instead of compiling the entire application in one go (which could lead to a slow start-up time), the JITcompiler simply compiles each portion of code as it is called (just-in-time). When code has been compiled.once, the resultant native executable is stored until the application exits, so that it does not need to berecompiled the next time that portion of code is run. Microsoft argues that this process is more efficientthan compiling the entire application code at the start, because of the likelihood that large portions of anyapplication code will not actually be executed in any given run. Using the JIT compiler, such code willnever be compiled.