文档库 最新最全的文档下载
当前位置:文档库 › AWAIS-1型船舶自动识别系统操作及安装手册(英文版)

AWAIS-1型船舶自动识别系统操作及安装手册(英文版)

AWAIS-1型船舶自动识别系统操作及安装手册(英文版)
AWAIS-1型船舶自动识别系统操作及安装手册(英文版)

Contents

1 Overview 3

1.1 The Main Specifications 3

1.2 The Appearance of Minimum Keyboard Display (MKD) 3

2 Installation Request 4

2.1 The location of Installation 4

2.2 Warning 4

3 Introduction of Minimum Keyboard Display’s (MKD) Function4

3.1 Description of Front Panel Control Keys 4

3.2 Back Panel of Minimum Keyboard Display (MKD) and Description of

Interfaces 6

3.3 Minimum Keyboard Display’s Subarea7

4 MKD Display Basic operation 8

4.1 Turn on and Turn off 8

4.2 Function Menu 8

4.2.1 The Vessel List Menu 9

4.2.2 Vessel Configuration Menu 9

4.2.2.1 Static Data Menu 10

4.2.2.1.1 Vessel Static Info menu 11

4.2.2.1.2 ETA menu 12

4.2.2.1.3 VHF Configuration Menu 12

4.2.2.1.4 V oyage Info Menu 13

4.2.2.1.5 External GPS Configuration Menu 17

4.2.2.2 Long Rang Configuration Menu 18

4.2.2.3 Alarm Data Menu 19

4.2.2.3.1 Relay Config Menu 20

4.2.2.3.2 Status List Menu 22

4.2.2.3.3 Alarm List Menu 23

4.2.2.3.4 Stopping List Menu 24

4.2.2.4 Other Data Menu 24

4.2.2.4.1 Password Menu 25

4.2.2.4.2 Self Test Function 26

4.2.2.4.3 Edition Menu 28

4.2.2.4.4 Baud Rate Menu 28

4.2.2.5 Reg. Area Menu 29

4.2.2.

5.1 Area View Menu 30

4.2.2.

5.2 Create Area Menu 31

4.2.3 SRMs Menu 32

4.2.3.1 Tx List Message Menu 33

4.2.3.2 Rx List Message 34

4.2.3.3 Send Message Menu 34

4.2.3.4 Long Range Menu 35

4.2.4 Display Setting 36

4.2.5 Plot Menu 37

4.2.6 OWNER DETIAL Menu 37

4.2.7 Alarm Information Dialog 39

5 Maintenance 39

6 Mounting 40

7 Installation 41

7.1 Transponder Unit 41

7.2 Display Unit 42

7.3 VHF Antenna 42

7.4 GPS Antenna 43

7.5 Junction Box 43

8 Wiring Input/Output connections 44

8.1 Power cable connections 44

8.2 Signal cable connections 44

8.2.1 Signal cable of the Transponder Unit 44

8.2.2 Signal cable of the Display Unit 45

8.2.3 Junction box 45

9 Transponder status LEDs 47

10 Dimension 48

10.1 Transponder Unit 48

10.2 Display Unit 48

10.3 Junction box 49

11 Appendix 49

11.1 Reference 49

11.2 Serial Communication Interfaces 50

11.2.1 Sensor input data and formats 50

11.2.2 Input & output data and formats in IEC61162-1 50

1Overview

Minimum Keyboard Display (MKD) is a Display Unit of Automatic Identify System (AIS) which is designed by Advanced Aviation Company, a subsidiary of Shanghai Avionics Corporation. It transfers data with AIS to get the voyage information of own vessel and other vessels using RS422. It can help the vessels get higher efficiency and safety, and avoid traffic accidents.

1.1The Main Specifications

Working Temperature: -15℃---+55℃

Working Humidity: 20%---75%

Power Supply: 24Vdc---+30%

1.2The Appearance of Minimum Keyboard Display (MKD)

2Installation Request

2.1The location of Installation

Minimum Keyboard Display (MKD) and power supply should be installed indoor.

Minimum Keyboard Display (MKD) should be convenient to be operated and observed.

2.2Warning

The system should be away from heat and strong magnetic field. And the installation place should be dry.

3Introduction of Minimum Keyboard Display’s (MKD) Function

3.1Description of Front Panel Control Keys

● Power Key ---Turn on and off MKD, and need be hold about 5 seconds.

● System Key 【MENU 】 ---Exit current menu and back the upper menu. ● Direction Keys 【▲▼??】---Move cursor up and down. ● Exit key 【ESC 】

--- Exit current menu, return previous menu.

● Confirmation Key 【OK 】 ---Enter or exit setting parameter. ● Alphanumeric Keys --- Input different parameter.

● Function Keys

---Different pages have different functions. (They are F1, F2, F3, F4, and F5 from left to right).

[LCD]

3.2Back Panel of Minimum Keyboard Display (MKD) and

Description of Interfaces

Introduction:

1: +24V 2: sky3: GND

JX1

JX2 1: Y 3: A 5: GND

2: Z 4: B

1: Y 5: spare9 : Y 13: spare17: spare

2: Z 6: spare10 : Z 14: spare18: spare

3: A 7: spare11 :

A 15: spare19: spare

4: B 8: spare12: B 16: spare

JX3

3.3 Minimum Keyboard Display’s Subarea

[A] Show that Automatic Identify System (AIS) is using GPS. [B] Show that if there are some alarm information. [C] Show that if there are some safety messages.

[D] Show if the communication between Minimum Keyboard Display and Automatic Identify System (AIS) is OK.

[E] Display the content of current menu. [F] Area of Function Key.

[G] Show the current vessels. (Just list the number of vessels and the serial of vessels). [H] Display the status of current vessel.

[E]

[F]

[A]

4MKD Display Basic operation

4.1Turn on and Turn off

●Turn MKD on: Check the connection, and make sure that the connection is right, and then

press the power key and hold it about 5 seconds.

●Turn MKD off: Press the power key and hold it about 5 seconds when the MKD is on.

4.2Function Menu

(Power on

4.2.1The Vessel List Menu

The opening page is the main working page, as follows:

The cursor shows the vessel which is chosen.

Move the cursor to choose different vessels with Up and Down key 【▲】【▼】. Select the pages with Left and Right key【?】【?】.

See the detail menu of chosen vessel with【OK】.

4.2.2Vessel Configuration Menu

Enter Vessel Configuration Menu page with 【F1】. As follows:

Enter Static Data Menu With 【F1】.

Enter Long Range menu with 【F2】.

Enter Alarm Data menu with 【F3】.

Enter Other Data menu with 【F4】.

Enter Reg. Area Menu with 【F5】.

4.2.2.1Static Data Menu

Enter Static Data page from Local vessel configuration page with 【F1】. As follows:

Enter Static Data menu with 【F1】.

Enter ETA Menu with 【F2】.

Enter VHF Configuration menu with 【F3】.

Enter V oyage Information menu with 【F4】

Enter External GPS Configuration menu with 【F5】

4.2.2.1.1Vessel Static Info menu

Enter Static Information menu to set MMSI, IMO, name, number, and dimension of own vessel with 【F1】. As follows:

Move the cursor to select different items with Up and Down Keys 【▲】【▼】.

Enter or exit Content Setting menu with 【OK】.

Save and exit with 【F1】.

Delete former notation with 【F5】.

4.2.2.1.2ETA menu

Enter Estimate Time Arrived page from Vessel Configuration page with 【F2】. As follows:

Move cursor up and down to select different items with Up and Down keys 【▲】【▼】. Enter or exit Content Setting menu with 【OK】.

Save this setting and exit with 【F1】.

4.2.2.1.3VHF Configuration Menu

Enter VHF Configuration page from Vessel Configuration page with 【F3】.

Move cursor up and down to select different item with 【▲】【▼】.

Enter or exit Content Setting Menu with 【OK】.

Save this setting and exit with 【F1】.Delete the one notation before cursor with 【F5】.

4.2.2.1.4Voyage Info Menu

Enter V oyage Information Setting page from Vessel Configuration page with 【F4】. As follows:

Move cursor up and down to select different item with 【▲】【▼】. Enter or exit Content Setting Menu with 【OK】.

Save this setting and exit with 【F1】.

Delete the one notation before cursor with 【F5】.

V oyage State

DG: Dangerous Goods

HS: Harmful Substance

MP: Marine Pollutants

*: Ship type should be build by first and second Number.

4.2.2.1.5External GPS Configuration Menu

Enter External GPS Configuration Menu from Vessel Configuration page with 【F5】. This can set the dimension of External GPS. As Follows:

Move cursor to choose different item with 【▲】【▼】

Enter or exit Content setting Menu with 【OK】

Save and exit with 【F1】

Delete the notation before Cursor with 【F5】

Press 【ESC】to Return upper menu, and press 【MENU】to Return Main page.

4.2.2.2Long Rang Configuration Menu

Enter Long Rang Configuration page from Vessel Configuration page with 【F2】. As follows:

Save and exit with 【F1】.

Set the mode of reply is automatic mode with 【F2】

Set the mode of reply is manual mode with 【F3】

Press number 0-9 to choose the what to reply

Return upper menu with 【ESC】, and Return Main page with 【MENU】

4.2.2.3Alarm Data Menu

Enter Alarm Data page from Vessel Configuration page with 【F3】. As follows:

Enter Relay Setting Menu with 【F1】

Enter State Information Setting Menu with 【F2】

Enter Alarm List menu with 【F3】

Enter Stopping Information menu with 【F5】

Return upper menu with 【ESC】, and Return Main page with 【MENU】

4.2.2.3.1Relay Configuration Menu

Enter Relay Configuration page from Alarm Data page with 【F1】

Press Number keys 1-6 to choose if Relay Alarm turns on and turns off under special conditions. “on” means turn on the alarm and “off” means turn off the alarm.

KlippelQCsystem操作说明书

FOSTER ELECTRIC (PANYU) FACTORY
ENG1/HHJZ—20100117 1/25
Klippel QC system 操作说明书
第一章 生产线使用指南
一、开机注意事项: 1.开机:必须先开电脑,再开分析仪,避免电脑开启时冲击电流损坏分析仪内 部精密部件; 2.关机:必须先关分析仪,再关电脑; 3.平时机器不使用时,要用毛巾或者棉布盖好测试箱,避免灰尘落入 MIC,影 响测试结果。
二、使用手顺: 1.从桌面上双击“QC Engineer”,打开使用界面,选择要测试的机种,按“Start” 开始进入测试窗口。此时,系统会弹出要求输入用户名与密码的小窗口,输入正 确才能进入设置。
双击这里
选择要测试的 机种名
输入用户名与 密码

FOSTER ELECTRIC (PANYU) FACTORY
ENG1/HHJZ—20100117 2/25
2.进入测试界面后,系统会弹出下图所示的设置窗口,如果这个窗口关闭了,可 以点击界面左上角的手形工具箱重新打开,在这里主要是设置测试数据保存位 置,以方便查找。
在 Tasks 任务栏 内选择第四行 “Finish”.
点击这里新建 保存目录路径
点击这个手形 工具可打开以 上窗口

FOSTER ELECTRIC (PANYU) FACTORY
ENG1/HHJZ—20100117 3/25
3.点击“Limits”设定测试标准,此时需要点击一下“Activate Limit Calculation Mode”打开激活,如下图所示。
点击这里激 活,再次点击 为关闭激活
注意:设定标准请在生产线都开 LINE 的情况下进行设定, 那样才能设定需要的环境噪音!

KLIPPEL 操作手册

KLIPPEL 测试系统的简单操作手册 检查激光:Enter----Main menu 选择Displacement meter----选择D(对校准器第二格,距离复0)----激光对准第一格(距离显示在9.7mm-10.3mm之间)----激光对准第三格,距离显示在-9.7mm—10.3mm之间----OK 固定喇叭,将雷射激光对准喇叭中间反射面(可用涂改液涂在雷射光束照射喇叭位置,增强反射强度,白色贴纸也可),距离调至绿灯及黄灯皆连续亮,不闪动,将连接线正确接上喇叭正负端子。 LPM小信号线性参数测试 1.点选第一行黄色资料夹图示,点选“open project”, 然后点选“new folder”, 输入文件名后按OK。 2.点选第一行蓝色测试图示(new operation),点选测试模式“LPM linear parameters”, 点先“LPM Logitech”设定,按OK。 3.点选第一行灰色喇叭图示“properties”,选“info可于name”栏重新命名, “comment”栏输入备注说明。然后点“Driver”,于“Diaphragm Area”栏输入有效振动面积(cm2),或于“Diameter”栏输入有效振动直径(cm),于“Material of voice coil”点音圈材质。在于“Power”栏,输入额定功率(W),额定阻抗(ohm),按OK确认,按Close关闭。 4.点选第一行绿色启动图示开始测试。 结果可以得下列小信号线性参数 Electrical Parameters Re electrical voice coil resistance at DC 直流电阻 Le frequency independent part of voice coil inductance L2 para-inductance of voice coil R2 electrical resistance due to eddy current losses Cmes electrical capacitance representing moving mass Lces electrical inductance representing driver compliance Res resistance due to mechanical losses Fs driver resonance frequency 共振频率 Mechanical Parameters (using laser) Mms mechanical mass of driver diaphragm assembly Including air load and voice coil 有效振动质量(含空气负载) Mmd mechanical mass of voice coil and diaphragm without Air load 有效振动质量(不含空气负载) Rms mechanical resistance of total-driver losses Cms mechanical compliance of driver suspension 顺性 Kms mechanical stiffness of driver suspension 钢性 Bl force factor (Bl product) 磁力因数

相关文档