-P1-
NIPPON SHEET GLASS CO.,LTD.DISPLAY DIVISION
SPECIFICATION No. C-1601-CG -T-0039
DATE of ISSUE NUMBER of PAGES 5
APPROVAL
NIPPON SHEET GLASS SALES MANAGER DATE QUALITY MANAGER
DATE
CUSTOMER
SALES MANAGER
DATE QUALITY MANAGER
DATE
GLASS SPECIFICATIONFOR COVER GLASS (glanova(ver.1))
板硝子中国经销商 深圳艾特视电子
-P2-
SPECIFICATION
1. MATERIAL
PHYSICAL CHARACTERISTICS(Typical Value)
Index of refraction 1.51
Transmittance91%(400~700nm)
Reflectance approx. 4%(single face)
Softening point approx. 742℃
Strain point approx. 508℃
Annealing point approx. 552℃
Coefficient of thermal
expansion91.8×10-7/℃
(room temp. to 350℃)
Specific gravity 2.48
Photoelastic constant27.1(nm/cm)/MPa
板硝子中国经销商 深圳艾特视电子
-P3-
-P4-
-P5-4. PACKING
(1)Lot 1 lot is 1 item in 1 container.
(2)Interleaving Interleaving paper is used between 2 sheets.
paper
(3)wrapping A block of all sheets is wrapped with polyethylene film.
5. Criteria of the lot acceptance judgement
(1)Items except appearance quality
S-1(Ac, Re)=(0, 1)
(2)Appearance quality
S-4AQL 4.0%
6. Storage
Substrates should be stored in original packaging only under dry and cold conditions,
e.g. at room temperature, less than 23±2℃, and humidity less than 50±10% RH.
7. Storage term of guarantee
It is not recommended to extend storage for more than 6 months.
8. Any doubts in connection with interpretation of this Specification or any matters not stipulated here in shall be settled by mutual consultation between both parties.
板硝子中国经销商
深圳艾特视电子