机械专业英语期末考试题及答案

机械专业英语期末考试题及答案1．词汇翻译

画法几何 descriptive geometry

机械制图 Mechanical drawing

投影 projection

视图 view

剖视图 profile chart

标准件 standard component

零件图 part drawing

装配图 assembly drawing

尺寸标注 size marking

技术要求 technical requirements

主轴 spindle

主轴箱 headstock

卡盘 chuck

加工中心 machining center

车刀 lathe tool

车床 lathe

钻削镗削 bore

车削 turning

磨床 grinder

基准 benchmark

钳工 locksmith

机螺纹 thread

电一体化 mechanotronics mechanical-electrical integration 精加工 finish machining

粗加工 rough machining

变速箱体 gearbox casing

表面粗糙度 surface roughness

2．将下列短语译成汉语

1. the fatigue loading（疲劳载荷）

2. the radial loads（径向负荷）

3. the thrust loads逆负荷

4. the ball bearing球轴承

5. the roller bearing滚子轴承

6. the single-row bearings单沟轴承

7. the double-row bearing双沟轴承

8. the needle bearing滚针轴承

9. the bearing life轴承寿命

10. The rating life额定寿命

11. the axis of rotation旋转轴

12. The helix angle螺旋角

13. a right-hand helix 右旋

14. a left-hand helix左旋

15. an involute helicoids螺旋面

16. an involute curve渐开线

17. the shaft centerlines轴中心线

18. worm gear蜗轮

19. the hypoid gear准双曲面齿轮

20. right angle直角

21. worm gearing蜗杆传动

22. the lead angle导角

23. shaft angle轴线角度

24. bending load弯曲载荷

25. tension load张力负荷

26. compression load压缩负载

27. torsional load扭转负荷

28. the bending moment弯矩

29. the bending stress弯曲应力

30. 30.four-bar linkage（四连杆机构）

3．翻译下列句子

1. The simplest closed-loop linkage is the four-bar linkage, which has three moving links (plus one fixed link) and four pin joints.（最简单的封闭式的连杆机构就是四杆机构，四杆机构有三个运动构件（加上一个固定构

件）并且有四个销轴。）

2. Although the four-bar linkage and slider-crank mechanism are very

useful and found in thousands of applications, we can see that these linkages have limited performance level.( 虽然四杆机构和曲柄滑块机构是非常有用而且在成千上万的应用中都可找到。但是我们还看到，这些连杆机构其性能水平的发挥已经受到限制。)

3. The process of drawing kinematic diagrams and determining degrees of

freedom of mechanisms are the first steps in both the kinematic analysis and synthesis process.（画运动图和确定机构自由度的过程，就是运动分析和综合过程的第一个阶段。）

4. The ability to visualize relative motion, to reason why a mechanism is

designed the way it is, and the ability to improve on a particular design are marks of a successful kinematician.（设想相对运动的能力，能推想出之所以这样设计一个机构的原因和对一个具体设计进行改进的能力是一个成功的机构学家的标志。）

Kinematic inversion is the process of fixing different links of a chain to create different mechanisms.（这个过程的动态反演是固定的,不同的连接创造出不同的机制。）

四．翻译下列短文

1.A kinematic chain is a system of links, that is, rigid bodies, which

are either jointed together or are in contact with one another in a manner that permits them to move relative to one another. If one of the links is fixed and the movement of any other link to a new position will cause each of the other links to move to definite predictable position, the system is a constrained kinematic chain. If one of the links is held fixed and the movement of any other link to a new position will not cause each of the other links to move to a definite predictable position, then the system is an unconstrained kinematic chain.

（运动链是一个构件系统装置即若干个刚体，它们或者彼此铰接或者互相接触，方式上是允许它们彼此间产生相对运动。如果构件中的某一构件被固定而使任何其他一个构件运动到新的位置将会引起其他各个构件也运动到确定的预期的位置上的话，该系统装置就是一个可约束的运动链。如果构件中的某一构件仍保持固定而使任一运动到达一新的位置

而不会使其他各个构件运动到一个确定的预期的位置上的话，则该系统装置是一个非约束运动链。）

2. A mechanism or linkage is a constrained kinematic chain, and is a mechanical device that has the purpose of transferring motion and/or force from a source to an output. A linkage consists of links (or bars), generally considered rigid, which are connected by joints, such as pin (or revolute) or prismatic joints, to form open or closed chains (or loops). Such kinematic chains, with at least one link fixed, become (1) mechanisms if at least two other links remain mobility, or (2) structures if no mobility remains. In other words, a mechanism permits relative motion between its "rigid links"; a structure does not. Since linkages make simple mechanisms and can be designed to perform complex tasks, such as nonlinear motion and force transmission, they will receive much attention in mechanism study.

（机构或连杆构件是一个可约束的传动链而且是一个从输入到输出以传递运动和（或）力为目的的机械装置。连杆机构是由通常被认为是刚体构件或杆组成的，它们是以销轴铰接的，例如用柱销（圆形的）或棱柱体销轴铰接，以便成形开式或闭式（回环式）的运动链。这样的运动链在至少有一个构件被固定的条件下：（1）如果至少有两个构件能保持运动，就变为机构，（2）如果没有一个构件能够运动，则就成为结构。换句话说，机构是允许其“刚性构件”之间相对运动，而结构则不能。由于连杆机构做成一简单机构而且能设定实现复杂的任务，例如非线性运动和力的传递运动。它们在机构学研究中将受到更多的关注。）

关于机械的英语文章学习

关于机械的英语文章学习 Mechanical engineering Engineering Science in life are widely used, especially in mechanical engineering in the application of life is almost throughout life in all its aspects, to automobiles, aircraft, small electric fans, umbrella, all of these and related machinery. The project includes many subjects, but the mechanical engineering is one of the most important subjects, not only because of our life and it is closely related to, but with the progress of the times, people have to rely on mechanical engineering products, in automation today, machine instead of many this is the part of the human labor, improve the efficiency and save time. As a result of mechanical engineering in every aspect of life, therefore, as an engineer, be faced with a great many challenges, in addition to a solid with knowledge, but also keep pace with the times, familiar with the machinery and related software, can be very good use of software, and as a an engineer, we should try our best to design and produce and closely related to the life of the machine, and can in life play a real role, also have

(完整版)机械工程专业英语词汇

陶瓷ceramics 合成纤维synthetic fibre 电化学腐蚀electrochemical corrosion 车架automotive chassis 悬架suspension 转向器redirector 变速器speed changer 板料冲压sheet metal parts 孔加工spot facing machining 车间workshop 工程技术人员engineer 气动夹紧pneuma lock 数学模型mathematical model 画法几何descriptive geometry 机械制图Mechanical drawing 投影projection 视图view 剖视图profile chart 标准件standard component 零件图part drawing 装配图assembly drawing 尺寸标注size marking 技术要求technical requirements 刚度rigidity 内力internal force 位移displacement 截面section 疲劳极限fatigue limit 断裂fracture 塑性变形plastic distortion 脆性材料brittleness material 刚度准则rigidity criterion 垫圈washer 垫片spacer 直齿圆柱齿轮straight toothed spur gear 斜齿圆柱齿轮helical-spur gear 直齿锥齿轮straight bevel gear 运动简图kinematic sketch 齿轮齿条pinion and rack 蜗杆蜗轮worm and worm gear 虚约束passive constraint 曲柄crank 摇杆racker 凸轮cams

《机械工程专业英语教程》课文翻译

Lesson 1 力学的基本概念 1、词汇： statics [st?tiks] 静力学；dynamics动力学；constraint约束；magnetic [m?ɡ＇netik]有磁性的；external [eks＇t?:nl] 外面的, 外部的；meshing啮合；follower从动件；magnitude [＇m?ɡnitju:d] 大小；intensity强度，应力；non-coincident [k?u＇insid?nt]不重合；parallel [＇p?r?lel]平行；intuitive 直观的；substance物质；proportional [pr?＇p?:??n?l]比例的；resist抵抗，对抗；celestial [si＇lestj?l]天空的；product乘积；particle质点；elastic [i＇l?stik]弹性；deformed变形的；strain拉力；uniform全都相同的；velocity[vi＇l?siti]速度；scalar[＇skeil?]标量；vector[＇vekt?]矢量；displacement代替；momentum [m?u＇ment?m]动量； 2、词组 make up of由……组成；if not要不，不然；even through即使，纵然； Lesson 2 力和力的作用效果 1、词汇： machine 机器；mechanism机构；movable活动的；given 规定的，给定的，已知的；perform执行；application 施用；produce引起，导致；stress压力；applied施加的；individual单独的；muscular [＇m?skjul?]]力臂；gravity[ɡr?vti]重力；stretch伸展，拉紧，延伸；tensile[tensail]拉力；tension张力，拉力；squeeze挤；compressive 有压力的，压缩的；torsional扭转的；torque转矩；twist扭，转动；molecule [m likju:l]分子的；slide滑动; 滑行；slip滑，溜；one another 互相；shear剪切；independently独立地，自立地；beam梁；compress压；revolve (使)旋转；exert [iɡ＇z?:t]用力，尽力，运用，发挥，施加；principle原则, 原理，准则，规范；spin使…旋转；screw螺丝钉；thread螺纹； 2、词组 a number of 许多；deal with 涉及，处理；result from由什么引起；prevent from阻止，防止；tends to 朝某个方向；in combination结合；fly apart飞散； 3、译文： 任何机器或机构的研究表明每一种机构都是由许多可动的零件组成。这些零件从规定的运动转变到期望的运动。另一方面，这些机器完成工作。当由施力引起的运动时，机器就开始工作了。所以，力和机器的研究涉及在一个物体上的力和力的作用效果。 力是推力或者拉力。力的作用效果要么是改变物体的形状或者运动，要么阻止其他的力发生改变。每一种

机械专业英语作文

题目：请你用英语就机械领域的一个主题（如车床，螺母等）写一篇科技短文，字数在200以上。 Cutting tools（车刀） In mechanical engineering high-speed development today, cutting tools of development has become a necessary condition, but we also want to know the kinds of tools and applications in order to complete the cutting work, and maintain the good life of cutter According to the shape of the lathe tools, we generally use point form part of the car have the following kinds 1. The thick car, mainly used for cutting a lot of excess the diameter size close to need 2. Fine cars, this dao oil-stone available knife, so that the car is very smooth surface. 3. Cutting, only for end of cutting piece, can be used to cut materials. Turning part of the job is produce and deal with scraps of parts, including the blade, and broken broken or roll on scraps of structure, scraps discharge or let store the space of the chip, cutting fluids such as the channel structure elements. The cutting tool in part by the main cutting

机械专业英语复试词汇总结

机械英语词汇大全2 金属切削 metal cutting 机床 machine tool 金属工艺学 technology of metals 刀具 cutter 摩擦 friction 联结 link 传动 drive/transmission 轴 shaft 弹性 elasticity 频率特性 frequency characteristic 误差 error 响应 response 定位 allocation 拉孔 broaching 装配 assembling 铸造 found 流体动力学 fluid dynamics 流体力学 fluid mechanics 加工 machining 液压 hydraulic pressure 切线 tangent 机电一体化 mechanotronics mechanical-electrical integration 气压 air pressure pneumatic pressure 稳定性 stability 介质 medium 数学模型 mathematical model 画法几何 descriptive geometry 机械制图 Mechanical drawing 投影 projection 视图 view 剖视图 profile chart 标准件 standard component 零件图 part drawing 装配图 assembly drawing 尺寸标注 size marking 技术要求 technical

机床夹具 jig 动力学 dynamic 运动学 kinematic 静力学 static 分析力学 analyse mechanics 拉伸 pulling 压缩 hitting 剪切 shear 扭转 twist 弯曲应力 bending stress 强度 intensity 三相交流电 three-phase AC 磁路 magnetic circles 变压器 transformer 异步电动机 asynchronous motor 液压驱动泵 fluid clutch 液压泵 hydraulic pump 阀门 valve 失效 invalidation 强度 intensity 载荷 load 应力 stress 安全系数 safty factor 可靠性 reliability 螺纹 thread 螺旋 helix 键 spline 销 pin 滚动轴承 rolling bearing 滑动轴承 sliding bearing requirements 刚度 rigidity 内力 internal force 位移 displacement 截面 section 疲劳极限 fatigue limit 断裂 fracture 塑性变形 plastic distortion 脆性材料 brittleness material 刚度准则 rigidity criterion 垫圈 washer 垫片 spacer 直齿圆柱齿轮

机械工程专业英语 翻译

2、应力和应变 在任何工程结构中独立的部件或构件将承受来自于部件的使用状况或工作的外部环境的外力作用。如果组件就处于平衡状态,由此而来的各种外力将会为零,但尽管如此,它们共同作用部件的载荷易于使部件变形同时在材料里面产生相应的内力。 有很多不同负载可以应用于构件的方式。负荷根据相应时间的不同可分为: (a)静态负荷是一种在相对较短的时间内逐步达到平衡的应用载荷。 (b)持续负载是一种在很长一段时间为一个常数的载荷, 例如结构的重量。这种类型的载荷以相同的方式作为一个静态负荷; 然而,对一些材料与温度和压力的条件下,短时间的载荷和长时间的载荷抵抗失效的能力可能是不同的。 (c)冲击载荷是一种快速载荷(一种能量载荷)。振动通常导致一个冲击载荷, 一般平衡是不能建立的直到通过自然的阻尼力的作用使振动停止的时候。 (d)重复载荷是一种被应用和去除千万次的载荷。 (e)疲劳载荷或交变载荷是一种大小和设计随时间不断变化的载荷。 上面已经提到，作用于物体的外力与在材料里面产生的相应内力平衡。因此,如果一个杆受到一个均匀的拉伸和压缩，也就是说, 一个力,均匀分布于一截面,那么产生的内力也均匀分布并且可以说杆是受到一个均匀的正常应力,应力被定义为 应力==负载 P /压力 A, 因此根据载荷的性质应力是可以压缩或拉伸的,并被度量为牛顿每平方米或它的倍数。 如果一个杆受到轴向载荷，即是应力，那么杆的长度会改变。如果杆的初始长度L和改变量△L已知，产生的应力定义如下: 应力==改变长△L /初始长 L 因此应力是一个测量材料变形和无量纲的物理量 ,即它没有单位;它只是两个相同单位的物理量的比值。 一般来说,在实践中,在荷载作用下材料的延伸是非常小的, 测量的应力以*10-6的形式是方便的, 即微应变, 使用的符号也相应成为ue。 从某种意义上说，拉伸应力与应变被认为是正的。压缩应力与应变被认为是负的。因此负应力使长度减小。 当负载移除时，如果材料回复到初始的，无负载时的尺寸时，我们就说它是具有弹性的。一特定形式的适用于大范围的工程材料至少工程材料受载荷的大部分的弹性, 产生正比于负载的变形。由于载荷正比于载荷所产生的压力并且变形正比于应变, 这也说明,当材料是弹性的时候, 应力与应变成正比。因此胡克定律陈述, 应力正比于应变。 这定律服从于大部分铁合金在特定的范围内, 甚至以其合理的准确性可以假定适用于其他工程材料比如混凝土，木材，非铁合金。 当一个材料是弹性的时候，当载荷消除之后，任何负载所产生的变形可以完全恢复,没有永久的变形。

关于机械制造的英语文章

关于机械制造的英语文章 Mechanical engineering Engineering Science in life are widely used, especially in mechanical engineering in the application of life is almost throughout life in all its aspects, to automobiles, aircraft, small electric fans, umbrella, all of these and related machinery. The project includes many subjects, but the mechanical engineering is one of the most important subjects, not only because of our life and it is closely related to, but with the progress of the times, people have to rely on mechanical engineering products, in automation today, machine instead of many this is the part of the human labor, improve the efficiency and save time. As a result of mechanical engineering in every aspect of life, therefore, as an engineer, be faced with a great many challenges, in addition to a solid with knowledge, but also keep pace with the times, familiar with the machinery and related software, can be very good use of software, and as a an engineer, we should try our best to design and produce and closely related to the life of the machine, and can in life play a real role, also have

选矿书籍大全

选矿书籍大全 1. 大学教材 1.1 冶金工业出版社高校统编教材 《矿石学基础（第2版）》 《工艺矿物学》 《选矿概论》 《碎矿和磨矿》 《重力选矿（修订版）》（孙玉波主编，1993） 《磁电选矿》（王常任主编，1986出版；有书签） 《浮选[已经补齐]》（胡为柏版） 《矿物化学处理》 《选厂设计合集》 《化学选矿》 《化学选矿（原理、工艺及实践）》 《选矿电磁学》（昆工版，pdf，有书签） 《碎矿与磨矿(第二版)》 《碎矿与磨矿》 1.2 近年来新式教材（淡化专业性教材） 《矿物加工颗粒学》（选矿专业研究生教材之一） 《矿物颗粒分选工程》 《选矿学》(其实是选煤学，没有电选、化选内容，磁选和浮选一般) 《资源加工学》 《固体物料分选理论与工艺》 《选矿厂设计》（周龙廷高清第2版+书签+水印） 1.3 冶金行业职业教育培训规划教材 《碎矿与磨矿技术》 《磁电选矿技术》 《浮游选矿技术》 《重力选矿技术》 《化学选矿》黄尔君（高清） 1.4 其他经典教材 《浮游选煤与选矿》(蔡璋) 《浮选》（郭梦熊） 《矿石可选性研究(邱,超星)》 《矿石可选性研究（pdf）》（中南版） 《矿石可选性研究方法（pdf）》（邱版） 《老版的：矿石可选性研究》 《矿物浮选原理(书签+水印）》（卢版） 《重选原理》（老版教材） 《选矿厂设计（铁矿）》 《选矿厂设计(有色矿) 》（中南版） 《金与有色金属矿选矿厂设计》（徐正春版)

《大学生毕业设计指导教程（冶金，选矿，化工分册）》 《国外选矿设计名著 《选矿工艺》(侧重洗煤) 《选矿工艺与设备的概论.doc》 《[To] win_zw , 关于选矿工艺学方面教程》 《选矿工艺学(书签+水印）》 《很实用的浮选教材》 【基础化学丛书】《无机化学》《有机化学》《物理化学》《分析化学》1.5 专业英语 《选矿工程专业英语》 《选矿英语教材》 《简明英汉矿业词典》(在学校没有认真学专业英语的人有福了！）《汉英－英汉图解矿物加工词典》 《汉英-英汉矿物加工图解词典\邹志毅》 《矿物加工科技英语》 2 专著类书籍 2.1 选矿总论部分（不分矿种） 【数学模型】 《选矿数学模拟与模型》 《数学模型在矿物工程中的应用》（胡为柏李松仁著，1983） 【磁电选矿】 《磁种分选理论与实践》 《磁选理论及工艺（书签+水印）》 《高梯度磁力分离》 《铁矿石电选新工艺新技术-摩擦电选工艺理论（word版）》 《超导磁选及其进展》 《矿物电选》 【化学选矿】 《化学冶金（英文版）》 《有关选冶联合方面的名著-化工冶金(化学选矿)原理与实践》 《堆浸的原理和工艺》 《浸矿技术》 《加压浸出吸附萃取》 《矿浆电解原理》 《资源微生物技术》 《生物技术在矿物加工中的应用》-2008新书 《化学分离富集方法及应用》 【重力选矿】 《矿物分离过程动力学》 《微细与超细难选矿泥射流流膜离心分选法》 《悬浮液选矿理论与工艺新发展》 《水力旋流器分离技术》作者：赵庆国 《水筛理论及应用》文书明著 【浮游选矿】

机械制造专业英语文章

机械制造专业英语文章 篇一：机械专业英语文章中英文对照 Types of Materials 材料的类型 Materials may be grouped in several ways. Scientists often classify materials by their state: solid, liquid, or gas. They also separate them into organic (once living) and inorganic (never living) materials. 材料可以按多种方法分类。科学家常根据状态将材料分为：固体、液体或气体。他们也把材料分为有机材料(曾经有生命的)和无机材料(从未有生命的)。 For industrial purposes, materials are divided into engineering materials or nonengineering materials. Engineering materials are those used in manufacture and become parts of products. 就工业效用而言，材料被分为工程材料和非工程材料。那些用于加工制造并成为产品组成部分的就是工程材料。 Nonengineering materials are the chemicals, fuels, lubricants, and other materials used in the manufacturing process, which do not become part of the product. 非工程材料则是化学品、燃料、润滑剂以及其它用于加工制造过程但不成为产品组成部分的材料。 Engineering materials may be further subdivided into: ①Metal ②Ceramics ③Composite ④Polymers, etc. 工程材料还能进一步细分为：①金属材料②陶瓷材料③复合材料④聚合材料，等等。 Metals and Metal Alloys 金属和金属合金 Metals are elements that generally have good electrical and thermal conductivity. Many metals have high strength, high stiffness, and have good ductility. 金属就是通常具有良好导电性和导热性的元素。许多金属具有高强度、高硬度以及良好的延展性。 Some metals, such as iron, cobalt and nickel, are magnetic. At low temperatures, some metals and intermetallic compounds become superconductors. 某些金属能被磁化，例如铁、钴和镍。在极低的温度下，某些金属和金属化合物能转变成超导体。 What is the difference between an alloy and a pure metal? Pure metals are elements which come from a particular area of the periodic table. Examples of pure metals include copper in electrical wires and aluminum in cooking foil and beverage cans. 合金与纯金属的区别是什么？纯金属是在元素周期表中占据特定位置的元素。 例如电线中的铜和制造烹饪箔及饮料罐的铝。 Alloys contain more than one metallic element. Their properties can be changed by changing the elements present in the alloy. Examples of metal alloys include stainless steel which is an alloy of iron, nickel, and chromium; and gold jewelry which usually contains an alloy of gold

(完整word版)机械专业英语文章中英文对照

英语原文 NUMERICAL CONTROL Numerical control(N/C)is a form of programmable automation in which the processing equipment is controlled by means of numbers, letters, and other symbols, The numbers, letters, and symbols are coded in an appropriate format to define a program of instructions for a particular work part or job. When the job changes, the program of instructions is changed. The capability to change the program is what makes N/C suitable for low-and medium-volume production. It is much easier to write programs than to make major alterations of the processing equipment. There are two basic types of numerically controlled machine tools：point—to—point and continuous—path(also called contouring).Point—to—point machines use unsynchronized motors, with the result that the position of the machining head Can be assured only upon completion of a movement, or while only one motor is running. Machines of this type are principally used for straight—line cuts or for drilling or boring. The N/C system consists of the following components：data input, the tape reader with the control unit, feedback devices, and the metal—cutting machine tool or other type of N/C equipment. Data input, also called “man—to—control link”,may be provided to the machine tool manually, or entirely by automatic means. Manual methods when used as the sole source of input data are restricted to a relatively small number of inputs. Examples of manually operated devices are keyboard dials, pushbuttons, switches, or thumbwheel selectors. These are located on a console near the machine. Dials ale analog devices usually connected to a syn-chro-type resolver or potentiometer. In most cases, pushbuttons, switches, and other similar types of selectors are digital input devices. Manual input requires that the operator set the controls for each operation. It is a slow and tedious process and is seldom justified except in elementary machining applications or in special cases. In practically all cases, information is automatically supplied to the control unit and the machine tool by cards, punched tapes, or by magnetic tape. Eight—channel punched paper tape is the most commonly used form of data input for conventional N/C systems. The coded instructions on the tape consist of sections of punched holes called blocks. Each block represents a machine function, a machining operation, or a combination of the two. The entire N/C program on a tape is made up of an accumulation of these successive data blocks. Programs resulting in long tapes all wound on reels like motion-picture film. Programs on relatively short tapes may be continuously repeated by joining the two ends of the tape to form a loop. Once installed, the tape is used again and again without further handling. In this case, the operator simply loads and

机械工程专业英语施平没翻译课文补充.docx

. 4、工程机械概述 As we look around us we see a world full of“things”: machines, devices, tools; things that we have designed, built,and used; things made of wood, metals,ceramics, and plastics.We know from experience that some things are better than others;they last longer, cost less, are quieter, look better, or are easier to use. ; ; 情况 . Ideally, however, every such item has been designed according to some set of “functional requirements”as perceived by the designers—that is, it has been designed so as to answer the question,“Exactly what function should it perform?” In the world of engineering, the major function frequently is to support some type of loading due to weight, inertia, pressure, etc. 的 From the beams in our homes to the wings of an airplane, there must be an appropriate melding of materials,dimensions, and fastenings to produce structures that will perform their functions reliably for a reasonable cost over a reasonable

机械类英语文章

What is Hydraulic? A complete hydraulic system consists of five parts, namely, power components, the implementation of components, control components, no parts and hydraulic oil. The role of dynamic components of the original motive fluid into mechanical energy to the pressure that the hydraulic system of pumps, it is to power the entire hydraulic system. The structure of the form of hydraulic pump gears are generally pump, vane pump and piston pump. Implementation of components (such as hydraulic cylinders and hydraulic motors) which is the pressure of the liquid can be converted to mechanical energy to drive the load for a straight line reciprocating movement or rotational movement. Control components (that is, the various hydraulic valves) in the hydraulic system to control and regulate the pressure of liquid, flow rate and direction. According to the different control functions, hydraulic valves can be divided into the village of force control valve, flow control valves and directional control valve. Pressure control valves are divided into benefits flow valve (safety valve), pressure relief valve, sequence valve, pressure relays, etc.; flow control valves including throttle, adjusting the valves, flow diversion valve sets, etc.; directional control valve includes a one-way valve , one-way fluid control valve, shuttle valve, valve and so on. Under the control of different ways, can be divided into the hydraulic valve control switch valve, control valve and set the value of the ratio control valve. Auxiliary components, including fuel tanks, oil filters, tubing and pipe joints, seals, pressure gauge, oil level, such as oil dollars. Hydraulic oil in the hydraulic system is the work of the energy transfer medium, there are a variety of mineral oil, emulsion oil hydraulic molding Hop categories. Hydraulic principle It consists of two cylinders of different sizes and composition of fluid in the fluid full of water or oil. Water is called "hydraulic press"; the said oil-filled "hydraulic machine." Each of the two liquid a sliding piston, if the increase in the small piston on the pressure of a certain value, according to Pascal's law, small piston to the pressure of the pressure through the liquid passed to the large piston, piston top will go a long way to go. Based cross-sectional area of the small piston is S1, plus a small piston in the downward pressure on the F1. Thus, a small piston on the liquid pressure to P = F1/SI,Can be the same size in all directions to the transmission of liquid. "By the large piston is also equivalent to the inevitable pressure P. If the large piston is the cross-sectional area S2, the pressure P on the piston in the upward pressure generated F2 = PxS2 Cross-sectional area is a small multiple of the piston cross-sectional area. From the type known to add in a small piston of a smaller force, the piston will be in great force, for which the hydraulic machine used to suppress plywood, oil, extract heavy objects, such as forging steel. History of the development of hydraulic

研究生机械工程专业英语考试必背单词

研究生机械工程专业英语考试必背单词 Modified by JACK on the afternoon of December 26, 2020

单词 Lesson 1 Gear 齿轮, 传动装置 Bearing 轴承 Cams 凸轮 Cams and followers 凸轮和从动件 Couple 力偶 mechanics 力学 statics 静力学，静止状态 dynamics动力学，原动力，动力特性constraint forces 约束力 applied forces 作用力 Electric , magnetic, and gravitational forces 电,磁,重力 mating surface 啮合表面,配合表面,接触面meshing 啮合，咬合，钩住 meshing teeth 啮合齿 journal bearing 滑动轴承，向心滑动轴承metal-to-metal contact 金属 - 金属接触Overheating 过热 failure 失效 flaking 薄片，表面剥落，压碎 Spall 削，割，剥落，脱皮 noise 噪音 rough motion运动不精确 inertia惯性 particle 质点 rigid body刚体 deformable可变形的，应变的 deformable Body 变形体 Scalar 数量的，标量的 Vectors矢量 Density密度 Mass质量 Displacement位移 Velocity速度 Acceleration加速度 Moment力矩，弯矩 Momentum动量，冲量 Lesson 2 Compressive压缩的，有压力的 Turning 车削 Rectilinear直线的 micrometer 千分尺又称螺旋测微器 Power hacksaws 弓锯床 Shaper牛头刨床 Thread 螺纹 Work：功 muscular action肌肉动作 mechanical motion机械运动 stretch an object拉伸对象 tensile force：拉力 in tension：受拉 compressive force：压力 torsional force：扭力 torque：扭矩 shearing force ：剪切力 twist an object扭曲对象 Slide滑，脱落 Slip滑动，滑移 in compression受压 turning of a part对一个零件进行车削加工wedging action:楔入作用 chip ：切屑 centers of the lathe车床的顶尖 lathe dog车床夹头 centrifugal force ：离心力 grinding wheel ：磨削砂轮 bonding agent ：粘合剂 abrasive particle：磨料颗粒 centrifuge-type machines离心式机械Centrifuge离心机，离心作用 Centrifugal force principles离心力原理centripetal force ：向心力 rotary motion:回转运动 rectilinear motion：直线运动 hand tool手工工具 power tool动力工具 feed：进给 shaping：采用牛头刨床（shaper)进行刨削加工power saw：弓锯床，弓式锯床 the screw of a micrometer 意为“千分尺中的螺杆”harmonic and intermittent motion ：谐和运动和间歇运动 simple harmonic motion ：简谐运动