VI-JTLMM中文资料

12 1-800-735-6200

VI-J00MiniMod

DC-DC Converters 25 to 100 Watts

Product Highlights

The VI-J00 MiniMod family establishes a new standard in component-level DC-DC converters. This “junior” size complement to the higher power VI-200family offers up to 100W of isolated and regulated power in a board mounted package. At one-half the size and twice the power density of previous 100W modules, and with a maximum operating temperature rating of 100?C, the MiniMod opens new horizons for board-mounted (distributed) power architectures. Utilizing Vicor’s “zero-current-switching” forward converter technology,proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems.

Packaging Options

SlimMods?, high power density,flangeless packages and FinMods?,featuring integral finned heatsinks.SlimMod: Option suffix: - S Example: VI - JXX - XX - S

FinMod: Option suffix: - F1and - F2Examples:

VI - JXX - XX -F1, 0.75" height VI - JXX - XX -F2, 1.00" height

Converter Selection Chart

VI-J

Max. Output For 5V Outputs > 5V Outputs < 5V Outputs

(1)50W 50W 10A (2)75W 100W 20A (3)100W 100W 20A

Max. Output For 5V Outputs > 5V Outputs < 5V Outputs

(4)75W 75W 15A (5)50W 75W 15A (6)50W 75W 10A

Features

s Up to 50W/Cubic Inch

s UL, CSA, TüV, VDE, BABT s CE Marked

s Up to 90% Efficiency s Size: 2.28" x 2.4" x 0.5"(57,9 x 61,0 x 12,7)

s Remote Sense and Current Limit s Logic Disable

s Wide Range Output Adjust s ZCS Power Architecture s

Low Noise FM Control

Mechanical Drawing

(7,6) Min.

(3,0)

.12.30

*Brownout 75% of rated load; transient voltage for 1 second.

Rev 3 1 of 2

For the latest Vicor Product Information: https://www.wendangku.net/doc/9b7890503.html,

12 1-800-735-6200

73

Converter Specifications

(typical at T BP =25°C, nominal line and 75% load, unless otherwise specified)

VI-J00 E-Grade

VI-J00 C-, I-, M-Grade

PARAMETER

MIN.TYP.MAX.

MIN.

TYP.

MAX.

UNITS

TEST CONDITIONS

s Input Characteristics Inrush charge

60x10-660x10-6100x10-6

Coulombs

Nominal line

Input reflected ripple current – pp 10%10%

I IN

Nominal line, full load Input ripple rejection

dB 120 Hz, nominal line dB

2400 Hz, nominal line

No load power dissipation 1.352

1.35

2Watts

s Output Characteristics Setpoint accuracy 1.0%

2.0%0.5% 1.0%V NOM Load/line regulation 0.5%0.05%0.2%V NOM LL to HL, 10% to Full Load Load/line regulation

1.0%0.2%0.5%V NOM LL to HL, No Load to 10%Output temperature drift 0.020.010.02

%/°C Over rated temperature

Long term drift 0.020.02%/1K hours

Output ripple - pp: 2V, 3.3V 200100150mV

20 MHz bandwidth 5V 5%2%3%20 MHz bandwidth 10-48V 3%

0.75%

1.5%20 MHz bandwidth Trim range 1

50%110%50%110%V NOM Total remote sense compensation 0.50.5Volts 0.25V max. neg. leg Current limit

105%135%105%125%I NOM Automatic restart

Short circuit current 105%

140%

105%

130%

I NOM

s Control Pin Characteristics Gate out impedance 5050Ohms Gate in impedance 103103

Ohms Gate in high threshold 6

6Volts Use open collector

Gate in low threshold 0.65

0.65

Volts Gate in low current 6

6mA

s Dielectric Withstand Characteristics Input to output 3,0003,000V RMS Baseplate earthed

Output to baseplate 500500V RMS Input to baseplate 1,5001,500

V RMS

s Thermal Characteristics Efficiency

78-88%80-90%Baseplate to sink 0.40.4

°C/Watt With Vicor P/N 04308

s Mechanical Specifications Weight

3.0 (85) 3.0 (85)Ounces (Grams)

110V, 12V and 15V outputs, standard trim range ±10%. Consult factory for wider trim range.

For product compliance with agency standards please refer to pages 67 - 69.

25+20Log

( Vin Vout

30+20Log ( Vin

Vout

20+20Log ( Vin

)

Rev 3 2 of 2

For the latest Vicor Product Information: https://www.wendangku.net/doc/9b7890503.html,