NOKIA手机工程模式的说明书
简介:
NOKIA移动电话的工程模式名称为“Net monitor"分组画面为改锥、铁锤和手机,诺基亚的工程模式启动后可以通过命令开启或关闭。前面的画面显示系统网络的功能,后面则以介绍手机内软硬件资料为主。
?载频号码、在GSM系统的范围是1-124;
?Carrier number.The rangeinGSM is 1-124
?移动台接收电平(dBM值);
?MS RX level indBM
?接收信号等级,在GSM系统的范围是0-7;
?Received signalquality. The rangeinGSM is 0-7
?移动台发射功率等级,在GSM系统的范围是5-15级;
?MS TXpowerlevel. The range in GSM is 5-15
?C1(多径衰耗标准);
?C1(path loss criterion,used for cellselectionand reselection, therange in GSM is -99..99)
?RLT(音频超时)
?RLT (Radio LinkTimeout)
?时隙,在GSM系统的范围是0-7;
?Timeslot. Therange in GSM is 0-7
?发射转态指示;
?Indication ofthe transmitter status
?网络信息;
?Information of the network parameteres
?TMSI(临时移动电话识别码);
?TMSI (temporary Mobile Subscriber Identity)
?小区ID;
?CellIdentification(Cell ID, number of the usedcell)
?国家码;
?MCC(MobileCountry Code)
?网络码;
?MNC (Mobile NetworkCode)
?本地区域码;
?LAC (LocationArea Code)
?地区码;
?Ciphering (on/off)
?调频;
?Hopping(on/off)
?调频;
?DTX(on/off)
?自动功率控制
Discardingcell barredinformation
工程模式介绍
按左边确认键即可进入工程模式菜单
菜单 10-1
| 16 -55xxx || CH Rx1 Pwr |
|0 1 x xxxx | | TS TA RLT xxxx|
| 51 51 | | Q1 Q1 |
| CCCH || xxCH |
16 -表示 BCCH 载频号码;means BCCH carrier number
-55 -表示接收功率值 ;means RX level (in dBm)
xxx - Pwr表示发射功率等级;Pwr means TX power level
0?- 时隙;TS(Time Slot)
1?-时间前置量;显示手机和基站的距离,乘以500以公尺计算;TA - Timing Advance
x - RLT - Radio Link Timeout
xxxx -不详;
51(C1)- 多径衰耗标准,本人英语和基站知识不灵光,大伙自己体会吧C1(path loss criterion, used for cell selection and reselection,the rangein GSM is -99..99) CCCH - 载频类型之一;(xxCH)type of current channel:
AGCH -(Access Grant Channel)允许连接频道由网络到手机的单向频道,安排专用控制信道以完成连接上网;