当前位置：文档库 › 109D_08中文资料

109D_08中文资料

109D

Vishay

Wet Tantalum Capacitors Sintered Anode T ANTALEX ?Capacitors for Operation to + 125 °C, Elastomer-Sealed

https://www.wendangku.net/doc/9111159801.html, For technical questions, contact: wettants@https://www.wendangku.net/doc/9111159801.html,

Document Number: 40023

FEATURES

?Terminations: standard tin/lead (SnPb),100 % tin (RoHS compliant) available ?Vishay Sprague model 109D tubular

elastomer-sealed, sintered anode T ANTALEX ?capacitors fill the basic requirements for applications where a superior quality, reliable

design for industrial, automotive and telecommunications application is desired.

?Model 109D capacitors are the commercial equivalents of Tansitor style WC, UWC, Mallory-NACC style TLS, TLH and the Military Style CL64 and CL65, designed to meet the performance requirements of Military Specification MIL-DTL-3965.

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 85 °C. (to + 125 °C with voltage derating.)

Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %standard. ± 10 %, ± 5 % available as special.DC Leakage Current (DCL max.):

At + 25 °C, + 85 °C, + 125 °C: Leakage current shall not exceed the values listed in the Standard Ratings Tables.Life Test: Capacitors are capable of withstanding a 2000 h life test at a temperature of + 85 °C or + 125 °C at the applicable DC working voltage.

Following the life test:

1.DCL shall not exceed the initial requirements or 1 μA,whichever is greater.

2.The ESR shall meet the initial requirement.

3.Change in capacitance shall not exceed 10 % from the initial measurement. For capacitors with voltage ratings of 15 WVDC and below, change in capacitance shall not exceed + 10 %, - 25 % from the initial measurement.

(1) Replaces previous W case.

* Pb containing terminations are not RoHS compliant, exemptions may apply ORDERING INFORMATION

109D 207

006

MODEL

CAP ACIT ANCE CAPACITANCE TOLERANCE DC VOLT AGE RATING

AT + 85 °C CASE CODE STYLE NUMBER

RoHS COMPLIANT

This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow

X0 = ± 20 % X9 = ± 10 %X5 = ± 5 %Special Order

This is expressed in volts.

T o complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R”(6R3 = 6.3 V)

See Ratings

and Case Codes

Table

0 = No outer sleeve. Standard

2 = Outer plastic film insulation

E3 = 100 % tin termination

(RoHS compliant)Blank = SnPb termination

(standard design)Note

Packaging: The use of formed plastic trays for packaging these axial lead components is standard. T ape and reel is not recommended due to

the unit weight.

Document Number: 40023For technical questions, contact: wettants@https://www.wendangku.net/doc/9111159801.html,

https://www.wendangku.net/doc/9111159801.html,

109D

Wet Tantalum Capacitors Sintered Anode T ANTALEX ?Capacitors for Operation to + 125 °C, Elastomer-Sealed

Vishay

STANDARD RATINGS

CAPACITANCE (μF) CASE

CODE

PART NUMBER (1)

MAX. ESR

at + 25 °C 120 Hz (Ω)

MAX. IMP.

at - 55 °C 120 Hz (Ω)

MAX. DCL (μA)

at MAX. CAPACITANCE CHANGE (%)

at + 25 °C

+ 85 °C + 125 °C

- 55 °C

+ 85 °C

+ 125 °C

6 WVDC at + 85 °C . . . 4 WVDC at + 125 °C

68C 109D686X0006C0 4 60 1 2 - 40 + 14 + 16 140F 109D147X0006F0 2 40 1 3 - 40 + 14 + 16 270F 109D277X0006F0 4 25 1 7 - 44 + 17.5 + 20 560T 109D567X0006T0 3 25 2 13 - 64 + 17.5 + 20 1200K 109D128X0006K0 1.6 20 3 14 - 80 + 25 + 25 8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C

22C 109D226X0008C06115 1 2 -40+ 10.5 + 12 220F 109D227X0008F0 4 30 1 7 - 44 + 17.5 + 20 10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C

20C 109D206X0010C0 5 175 1 2 - 32 + 10.5 + 12 47C 109D476X0010C0 5 100 1 2 - 36 + 14 + 16 180F 109D187X0010F0 4 40 1 7 - 36 + 14 + 16 390T 109D397X0010T0 3 25 2 16 - 64 + 17.5 + 20 15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C

15C 109D156X0015C0 6 155 1 2 - 24 + 10.5 + 12 33C 109D336X0015C0 5 90 1 2 - 28 + 14 + 16 120F 109D127X0015F0 4 50 1 7 - 28 + 17.5 + 20 270T 109D277X0015T0 3 30 2 16 - 56 + 17.5 + 20 540K 109D547X0015K0 1.2 23 6 24 - 80 + 25 + 25 25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C

10C 109D106X0025C0 6 220 1 2 - 16 + 8 + 9 22C 109D226X0025C0 5 140 1 3 - 20 + 10.5 + 12 50F 109D506X0025F0 4 70 1 5 - 28 + 13 + 15 100F 109D107X0025F0 4 50 1 10 - 28 + 13 + 15 100T 109D107X0025T0 4 45 2 10 - 48 + 13 + 15 180T 109D187X0025T0 4 32 2 18 - 48 + 13 + 15 350K 109D357X0025K0 1.3 24 7 28 - 70 + 25 + 25 30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C

7C 109D705X0030C08 275 1 2 - 16 + 8 + 12 8C 109D805X0030C07.5 275 1 2 - 16 + 8 + 12 15C 109D156X0030C08 175 1 2 - 20 + 10.5 + 12 40F 109D406X0030F0 4 65 1 5 - 24 + 10.5 + 12 68F 109D686X0030F0 6 60 1 8 - 24 + 13 + 15 100T 109D107X0030T0 6 40 2 12 - 28 + 10.5 + 12 150T 109D157X0030T0 4.1 35 2 18 - 48 + 13 + 15 300

109D307X0030K0

1.6

- 60

+ 25

Note

(1)Part Numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the Part Number. For RoHS compliant add “E3“.

109D

Vishay

Wet T antalum Capacitors Sintered Anode T ANTALEX ?Capacitors for Operation to + 125 °C, Elastomer-Sealed

https://www.wendangku.net/doc/9111159801.html, For technical questions, contact: wettants@https://www.wendangku.net/doc/9111159801.html,

Document Number: 40023

50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C

4.5C 109D455X0050C09 400 1 2 - 16 + 5 + 6 5C 109D505X0050C09 400 1 2 - 16 + 5 + 6 10C 109D106X0050C08 250 1 2 - 24 + 8 + 9 22F 109D226X0050F07 95 1 4 - 20 + 10.5 + 12 25F 109D256X0050F0 6 95 1 5 - 20 + 10.5 + 12 47F 109D476X0050F0 6 70 1 9 - 28 + 13 + 15 60T 109D606X0050T0 3 45 2 12 - 16 + 10.5 + 12 82T 109D826X0050T0 4 45 2 16 - 32 + 13 + 15 160K 109D167X0050K0 2.2 27 8 32 - 50 + 25 + 25 60 WVDC at + 85 °C . . . 40 WVDC at + 125 °C

4C 109D405X0060C010 550 1 2 - 16 + 5 + 6 8.2C 109D825X0060C08 275 1 2 - 24 + 8 + 9 20F 109D206X0060F0 5 105 1 5 - 16 + 10.5 + 12 39F 109D396X0060F07 90 1 9 - 28 + 10.5 + 12 50T 109D506X0060T0 4 50 2 12 - 16 + 10.5 + 12 68T 109D686X0060T0 6 50 2 16 - 32 + 10.5 + 12 140K 109D147X0060K0 2.4 28 8 32 - 40 + 20 + 20 75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C

3.5C 109D355X0075C010 650 1 2 - 16 + 5 + 6 6.8C 109D685X0075C08 300 1 2 - 20 + 8 + 9 13F 109D136X0075F0 6 160 1 4 - 16 + 8 + 9 15F 109D156X0075F0 6.5 150 1 5 - 16 + 8 + 9 33F 109D336X0075F07 90 1 10 - 24 + 10.5 + 15 40T 109D406X0075T0 5 60 2 12 - 16 + 10.5 + 12 56T 109D566X0075T0 6 60 2 17 - 28 + 10.5 + 15 110K 109D117X0075K0 3.1 29 9 36 - 35 + 20 + 20 100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C

2.5C 109D255X0100C026.595012- 16 + 7 + 8

3.0C 109D305X0100C010 800 1 2 - 16 + 7 + 8

4.7C 109D475X0100C010 500 1 2 - 16 + 7 + 8 10F 109D106X0100F0 6 215 1 4 - 16 + 7 + 8 11F 109D116X0100F0 6 200 1 4 - 16 + 7 + 8 22F 109D226X0100F07 100 1 9 - 16 + 7 + 8 30T 109D306X0100T0 4 80 2 12 - 16 + 7 + 8 43T 109D436X0100T0 6 70 2 17 - 20 + 7 + 8 125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C

1.7C 109D175X0125C0 54.6 1250 1 2 - 16 + 7 + 8 3.6C 109D365X0125C015 600 1 2 - 16 + 7 + 8 9F 109D905X0125F015 240 1 5 - 16 + 7 + 8 14F 109D146X0125F012 167 1 7 - 16 + 7 + 8 25

109D256X0125T0

- 16

+ 7

+ 8

Note

(1)

Part Numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the Part Number. For RoHS compliant add “E3“.

STANDARD RATINGS

CAPACITANCE (μF) CASE

CODE

PART NUMBER (1)

MAX. ESR

at + 25 °C 120 Hz (Ω)

MAX. IMP .

at - 55 °C 120 Hz (Ω)

MAX. DCL (μA)

at MAX. CAPACITANCE CHANGE (%)

at + 25 °C

+ 85 °C + 125 °C

- 55 °C

+ 85 °C

+ 125 °C

Document Number: 40023For technical questions, contact: wettants@https://www.wendangku.net/doc/9111159801.html,

https://www.wendangku.net/doc/9111159801.html,

109D

Wet Tantalum Capacitors Sintered Anode T ANTALEX ?Capacitors for Operation to + 125 °C, Elastomer-Sealed

Vishay

EXTENDED RATINGS

CAPACITANCE (μF) CASE

CODE

PART NUMBER (1)

MAX. ESR

at + 25 °C 120 Hz (Ω)

MAX. IMP.

at - 55 °C 120 Hz (Ω)

MAX. DCL (μA)

at MAX. CAPACITANCE CHANGE (%)

at + 25 °C

+ 85 °C + 125 °C - 55 °C

+ 85 °C

+ 125 °C

6 WVDC at + 85 °C . . . 4 WVDC at + 125 °C

820 F 109D827X0006F0 2.5 18 3 14 - 88 + 16 + 20 1500 T 109D158X0006T0 1.5 18 5 20 - 90 + 20 + 25 2200 K 109D228X0006K0 1 13 6 24 - 90 + 25 + 30 8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C 680F 109D687X0008F0 2.5 22 3 14 - 83 + 16 + 20 10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C

120 C 109D127X0010C0 4 60 2 9 - 45 + 13 + 16 150 C 109D157X0010C0 3 54 2 9 - 55 + 13 + 16 470 F 109D477X0010F0 2.5 30 3 16 - 65 + 16 + 20 560 F 109D567X0010F0 2.5 27 3 16 - 77 + 16 + 20 1000 T 109D108X0010T0 1.5 20 5 20 - 75 + 20 + 25 1200 T 109D128X0010T0 1.5 18 5 20 - 88 + 20 + 25 1200 K 109D128X0010K0 1 18 7 25 - 75 + 30 + 30 1500 K 109D158X0010K0 1 15 7 25 - 88 + 25 + 30 15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C

82 C 109D826X0015C0 4 80 2 9 - 38 + 13 + 16 100 C 109D107X0015C0 4 72 2 9 - 44 + 13 + 16 330 F 109D337X0015F0 2.5 35 3 16 - 60 + 16 + 20 390 F 109D397X0015F0 2.5 31 3 16 - 66 + 16 + 20 820 T 109D827X0015T0 1.8 22 6 24 - 77 + 20 + 25 820 K 109D827X0015K0 1.2 20 8 32 - 70 + 30 + 30 1000 K 109D108X0015K0 1.2 17 8 32 - 77 + 25 + 30 25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C

68 C 109D686X0025C0 4.3 90 2 9 - 40 + 12 + 15 270 F 109D277X0025F0 2.7 33 3 16 - 62 + 13 + 16 560 T 109D567X0025T0 1.8 24 7 28 - 72 + 20 + 25 680 K 109D687X0025K0 1.2 19 8 32 - 72 + 25 + 30 30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C

39 C 109D396X0030C0 5.2 110 2 - 28 + 10 + 12 47 C 109D476X0030C0 5.2 100 2 9 - 30 + 10 + 12 56 C 109D566X0030C0 5.2 100 2 9 - 38 + 12 + 15 150 F 109D157X0030F0 2.5 40 3 9 - 40 + 12 + 15 180 F 109D187X0030F0 2.5 40 3 16 - 45 + 13 + 16 220 F 109D227X0030F0 2.5 36 3 16 - 60 + 13 + 16 330 T 109D337X0030T0 1.8 28 8 16 - 45 + 20 + 25 390 T 109D397X0030T0 1.8 28 8 32 - 50 + 20 + 25 470 T 109D477X0030T0 1.8 25 8 32 - 65 + 20 + 25 560

109D567X0030K0

1.3

- 65

+ 25

+ 30

Note

109D

Vishay

Wet T antalum Capacitors Sintered Anode T ANTALEX ?Capacitors for Operation to + 125 °C, Elastomer-Sealed

https://www.wendangku.net/doc/9111159801.html, For technical questions, contact: wettants@https://www.wendangku.net/doc/9111159801.html,

Document Number: 40023

50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C

33 C 109D336X0050C0 5 135 2 9 - 29 + 10 + 12 120 F 109D127X0050F0 2.5 49 4 24 - 42 + 12 + 15 270 T 109D277X0050T0 1.8 29 8 32 - 46 + 20 + 25 330 K 109D337X0050K0 1.5 22 9 36 - 46 + 25 + 30 60 WVDC at + 85 °C . . . 40 WVDC at + 125 °C

27 C 109D276X0060C0 5 144 3 12 - 24 + 10 + 12 68 F 109D686X0060F0 3 60 3 20 - 30 + 12 + 15 100 F 109D107X0060F0 2.5 54 4 20 - 36 + 12 + 15 140 T 109D147X0060T0 2 32 8 32 - 30 + 16 + 20 220 T 109D227X0060T0 1.8 29 8 32 - 40 + 16 + 20 270 K 109D277X0060K0 1.5 23 9 36 - 45 + 20 + 25 75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C

12 C 109D126X0075C0 5 175 2 12 - 12 + 8 + 10 15 C 109D156X0075C0 5 160 2 12 - 14 + 10 + 12 22 C 109D226X0075C0 5 157 3 12 - 19 + 10 + 12 47 F 109D476X0075F0 3 75 4 24 - 18 + 10 + 12 56 F 109D566X0075F0 3 70 4 24 - 20 + 12 + 15 82 F 109D826X0075F0 2.5 63 4 24 - 30 + 12 + 15 110 T 109D117X0075T0 2 33 9 36 - 25 + 16 + 20 180 T 109D187X0075T0 1.8 30 9 36 - 35 + 16 + 20 220 K 109D227X0075K0 2.2 24 10 40 - 40 + 20 + 25 100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C

8.2 C 109D825X0100C0 6 250 3 12 - 12 + 12 + 12 10 C 109D106X0100C0 6 200 3 12 - 17 + 10 + 12 33 F 109D336X0100F0 3.5 85 4 24 - 18 + 15 + 15 39 F 109D396X0100F0 3.5 80 5 24 - 20 + 12 + 15 56 T 109D566X0100T0 2.2 45 9 36 - 20 + 15 + 15 68 T 109D686X0100T0 2.2 40 10 40 - 30 + 14 + 16 86 K 109D866X0100K0 3.2 30 10 40 - 25 + 15 + 15 125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C

6.8 C 109D685X0125C0 11.7 300 3 12 - 14 + 10 + 12 27 F 109D276X0125F0 3.5 90 5 24 - 18 + 12 + 15 47 T 109D476X0125T0 2.2 50 10 40 - 26 + 14 + 16 56

109D566X0125K0

4.1

- 25

+ 15

Note

EXTENDED RATINGS

CAPACITANCE (μF) CASE

CODE

PART NUMBER (1)

MAX. ESR

at + 25 °C 120 Hz (Ω)

MAX. IMP .

at - 55 °C 120 Hz (Ω)

MAX. DCL (μA)

at MAX. CAPACITANCE CHANGE (%)

at + 25 °C

+ 85 °C + 125 °C

- 55 °C

+ 85 °C

+ 125 °C

Disclaimer Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

元器件交易网https://www.wendangku.net/doc/9111159801.html,

Document Number: https://www.wendangku.net/doc/9111159801.html,