Ordering number: EN 4588A
Thick Film Hybrid IC
Overview
The STK311-110 is an RDS demodulator hybrid IC for the Radio Data System (RDS), or multiplexed FM broad-casting of various kinds of data, introduced within the European Broadcasting Union (EBU). It demodulates the multiplexed data modulating signal to recover the RDS signal. In combination with an LC7070 series LSI (for sync handling, error detection and correction), a low-cost high-performance RDS data decode system can be con-structed. Further, low-pro?le packaging is realized using Sanyo’s insulated metal substrate technology (IMST) for the base, SC system and photoresist technologies and folded board construction.
Applications
?Car stereos ?Home stereos
Features
?57kHz BPF built-in for adjustment-free operation
?Few external components required for a complete RDS data demodulation system ?ARI-SK/DK decoder built-in
Package Dimensions
unit: mm
4142
[STK311-110]
元器件交易网https://www.wendangku.net/doc/9913522599.html,
Operating Characteristics at Ta = 25°C, V CC = 5V
Equivalent Circuit
Parameter
Symbol Conditions
min typ max Unit Quiescent current I C C O –2230mA Band-pass ?lter gain VG B P F
f = 57kHz
912.517dB Center frequency 55.85758.2kHz
Q
–9–Band-pass ?lter selectivity
f = 90kHz (57kHz = 0dB)
?50?38?20dB f = 60kHz (57kHz = 0dB)?4?2.50dB f = 54kHz (57kHz = 0dB)?5?3.50dB f = 38kHz (57kHz = 0dB)
?50?39?35dB PLL capture range CR
5mVrms, CW input –?0.5+1.1–%RDS detector sensitivity Pin 10 low, input on pin 170.150.4 1.0mVrms SK detector sensitivity Pin 11 low, input on pin 170.3 1.0 2.0mVrms DK detector sensitivity Pin 12 low, input on pin 170.8 1.5 2.6mVrms RDS input dynamic range Pin 10 low, (ARI + RDS) signal maximum input on pin 173050–mVrms DK input dynamic range Pin 12 low, ARI signal maximum input on pin 17
75100–mVrms VCO free-running frequency
f O S C 453
456
459
kHz R11 is a function trimming resistor.Pins 3, 13 to 16 are no connection pins.
Sample Application Circuit
Pins 3, 13 to 15 are left open.
Sample System Con?guration
STK311-110
Pin Functions
Sample RDS Data Decoder Circuit
Number Name Function
1MONI BPF (for adjustment) monitor output 2V C C
Supply pin 4, 6GND Ground pins
5OSC VCO ceramic oscillator pin (456kHz)7CLK OUT Clock output 8DATA OUT Data output
9ID-ADJ SK detector sensitivity adjustment pin
10RDS-ID RDS signal detector indicator output.
Low-level output when an RDS signal is detected, and high-level when not detected.11SK-ID SK signal detector indicator output.
Low-level output when an SK signal is detected, and high-level when not detected.12DK-ID DK signal detector indicator output.
Low-level output when an DK signal is detected, and high-level when not detected.17
INPUT
Input pin
元器件交易网https://www.wendangku.net/doc/9913522599.html,
STK311-110
Characteristics Data
57kHz BPF selectivity
SK detector sensitivity adjustment
元器件交易网https://www.wendangku.net/doc/9913522599.html,