文档库 最新最全的文档下载
当前位置:文档库 › ATA74~80章题库

ATA74~80章题库

ATA74~80章题库
ATA74~80章题库

ATA74

1. The ignition systems supply in the combustion chamber for combustion. ( b )

A. fire sparks

B. electrical sparks

C. fire

D. Electricity

2. ___________ controls ignition system power to the EEC. ( a )

A.Start lever

B. Start switches

C. Ignition selector switch

D. Electronic engine control

3. Each engine has ________ ignition systems that operate independently. ( a )

A.two

B. three

C. four

D. Fire

4.You use ignition during these times:____________. ( d )

A.ground start

B. take off and landing

C. In-flight start

D. All of them

5.The ___________ supply power to he spark igniters. ( c )

A.electrical exciters

B. Ingition swithes

C. Ignition exciters

D. Generator

6.The engine 1 ignition systems receive _______ ac from ac transfer bus 1 and the ac standby bus. ( b )

A. 110v

B. 115v

C. 210v

D. 220v

7.Each engine has a _______and a ___________ignition system. ( d )

A.interior,exterior

B. front, back

C. upside,downside

D. right,left

8.These components which control the ignition system are in the flight compartment: ___________. ( d )

A.Engine start switches

B. ignition selector switch

C. start lever

D. all of them

9.The ignition exciters supply power to ___________. ( a )

A.spark igniters

B. electrical igniters

C. start switches

D. Ingition swithes

10.The spark igniter uses this power to ignite the ________ in the combustion chamber. ( c )

A. fuel

B. oil

C. fuel/air mixture

D. oil/air mixture

https://www.wendangku.net/doc/9e17614394.html,ually , only ______ ignition exciter per engine operates at a time. ( a )

A.one

B. two

C. three

D. Four

12.what makes each ignition lead cool ? ( c )

A.water

B. cool oil

C. booster air

D. cool fuel

13.The ac standby bus supplies _______ ac electrical power to the eec for right ignition exciter. ( c )

A. 100v

B. 110v

C. 115v

D. 120v

14.The ac standby bus supplies 115v ac electrical power to the ___________ for right ignition exciter. ( d )

A.start levers

B. engine start switches

C. ignition selector

D. EEC

15.The left ignition exciter for engine 2 uses power from ac transfer _________.( c )

A.standby bus

B. bus1

C. bus 2

D. emergency bus

16._________ controls power to the ignition exciters. ( d )

A.Start levers

B. Engine start switches

C. Ignition selector

D. EEC

17.The EEC and the CDS/DEUs monitor the position of these flight compartment components:___________. ( d )

A.start levers

B. engine start switches

C. ignition selector switch

D. all of them

18.Each _________sends a digital data signals to the EEC with switch position information.( a )

A.CDS/DEU

B. CDS/CDU

C. DEU/CDU

D. FMC/CDS

19.We use booster air to make each ignition lead cool.where is the booster air come from? ( a )

A.low pressure compressor exhaust air

B. high pressure compressor exhaust air

C. turbine exhaust air

D.inlet air

20. ATA74 talks about ______. ( a )

A.ignition

B.engine fuel and control

C.air

D.engine controls

Key:

1.b

2.a

3.a

4.d

5.c

6.b

7.d

8.d

9.a 10.c

11.a 12.c 13.c 14. d 15.c 16.d 17. d 18.a 19. a 20.a

ATA75

1.ATA75 talks about_________.( c )

A.ignition

B.engine fuel and control

C.air

D.engine controls

2.The engine air system has __________ control function. ( a )

A.turbine clearance

B.turbine temperature

C. turbine monitor

D. turbine warning

3.The engine air system adjusts the LPT and the HPC _________for all power condition.

( b )

A.air temperature

B. air flow

C. air pressure

D. air speed

4.The adjustments of the engine air system prevent __________. ( c )

A.engine explosion

B. engine fire

C. engine stall

D. engine break

5.The EEC receives airplane system data from ___________. ( b )

A.CDS

B. DEU

C. ADIRU

D. FMC

6.The EEC operates the air valves and the actuators through _________. ( a )

A.HMU

B.TCC

C.LVDT

D.RVDT

7.________ controls the high pressure compressor airflow. ( a )

A.VSV

B. VBV

C. TBV

D. TRA

8.________ controls the low pressure compressor discharge airflow. ( b )

A.VSV

B. VBV

C. TBV

D. TRA

9.________calculates commanded high pressure turbine clearance as a function of engine and P0 data. ( b )

A.CDS

B. EEC

C. ADIRU

D. FMC

10.P0 data usually comes from the _________ through the DEUs. ( c )

A.CDS

B. EEC

C. ADIRU

D. FMC

11._________ controls the amount of HPC 9th stage and 4th stage air that goes to the HPT shroud support. ( a )

A.HPTACC valve

B. LPTACC valve

C. Bleed valve

D. Air valve

12._________controls the amount of fan discharge air that goes to the LPT case. ( b )

A.HPTACC valve

B. LPTACC valve

C. Bleed valve

D. Air valve

13.In order to increases the fuel efficiency , the HPTACC system keeps the clearance between the HPT blade tips and the HPT shroud support to a __________. ( a )

A.minimum

B. maximum

C. appropriate

D. None of them

14.The HMU sends _________ pressure to move actuators. ( d )

A.fuel

B. oil

C. hydraulic oil

D. servo fuel

15.The EEC use ___________ data to control the HPTACC valve. ( d )

A.P0

B. N2

C. T3

D. All of them

16.HPTACC has _______ modes. ( a )

A.five

B. four

C. three

D. two

17.The EEC uses the __________ in the EEC if the ADIRU data becomes invalid. ( c )

A.TCC sensor

B. T3 sensor

C.P0 sensor

D. TAT sensor

18.The EEC uses the LVDTs to monitor the _________ of the HPTACC actuator. ( a )

A.position

B. temperature

C. pressure

D. Speed

19.The HPTACC actuator has ________LVDTs. ( d )

A.five

B. four

C. three

D. Two

20.The HPTACC system has these parts:________. ( d )

A.HPTACC valve

B. 9th stage bleed air duct

C. HPTACC manifold

D. All of them

Key:

1.c

2.a

3.b

4.c

5.b

6.a

7.a

8.b

9.b 10.c

11.a 12.b 13.a 14. d 15.d 16.a 17. c 18.a 19. d 20.d

ATA76

1.ATA76 talks about ___________. ( d )

A.ignition

B.engine fuel and control

C.air

D.engine controls

2.The engine control system has these components:_________.( d )

A.thrust lever assemblies

B.thrust lever resolvers

C.engine start levers and switch

D.all of them

3.The engine control has two thrust lever assemblies, _________ for each engine. ( a )

A.one

B.two

C.three

D.four

4.________ prevents the operation of the forward thrust. ( a )

A.an interlock

B.an outlock

C.an autolock

D.an manual lock

5.Each thrust lever resolver assembly has ________ resolvers. ( b )

A.one

B.two

C.three

D.four

6.You can not increase the reverse thrust until the thrust reverser sleeves are near the ________. ( c )

A.close position

B.stand by position

C.full deployed position

D.STOW position

7.The thrust lever and the start levers are on the control stand in the ___________. ( b )

https://www.wendangku.net/doc/9e17614394.html,nding gear compartment

B.flight compartment

C.equipment compartment

D.passenger compartment

8.You go into the forward equipment compartment through the access door, forward of the nose landing gear. The "nose" in the sentence means: __________. ( a )

A.forward

B.back

C.top

D.downside

9.Forward and reverse thrust lever position electric signal is sent to __________. ( d )

A.FMC

B.DEU

C.FDR

D.EEC

10.The clutch gives a ____________ to prevent the free movement of the thrust levers.

( b )

A.protect signal

B.friction force

C.friction signal

D.stop force

11.There are _________ autothrottle switch pack. ( b )

A.one

B.two

C.three

D.four

12.Each switch pack has _____d____ switches which supply discrete thrust lever position signals to various systems. ( d )

A.five

B.seven

C.eight

D.nine

13.You use the thrust levers to make the _________ input. ( a )

A.manual

B.automatic

C.analog

D.digital

14.___________ prevents the operation of the forward thrust lever and the reverse thrust lever at the same time. ( a )

A.thrust lever lock pawl

B.thrust lever lock pwal

C.thrust lever lock paul

D.thrust lever lock pual

15.When the forward thrust lever is not at idle , the pawl locks the reverse thrust lever at the

________. ( d )

A.close position

B.stand by position

C.full deployed position

D.STOW position

16.When the forward thrust lever is at idle ,the pawl ________ the reverse thrust lever.

( b )

A.locks

B.unlocks

C.starts

D.stops

17.The start lever has __________ position. ( b )

A.one

B.two

C.three

D.four

18.Each engine start lever operate ________ switches. ( c )

A.two

B.four

C.six

D.eight

19.When both sleeves are at more than ________ of deploy, the EEC energizes the solenoid.

( c )

A.20%

B.40%

C.60%

D.80%

20.You remove panels form the aisle stand to get access to these component:____________. ( d )

A.start lever switches

B.interlock latch

C.thrust lever cranks and rods

D.all of them

Key:

1.d

2.d

3.a

4.a

5.b

6.c

7.b

8.a

9.d 10.b

11.b 12.d 13.a 14.a 15.d 16.b 17. b 18.c 19. c 20.d

ATA77

1.ATA77 talks about ____________. ( d )

A.ignition

B.engine fuel and control

C.air

D.engine indicating

2.The engine indicating system continuously supplies engine data to the __________. ( a )

A.CDS

B.ADIRU

C.DEU

D.EEC

3.The engine indicating system shows _____________ parameters for each engine. ( d ) AN1 B.N2 C.EGT D.all of them

4.EEC receives an analog input form ________ engine sensors. ( d )

A.N1 speed sensor

B.N2 speed sensor

C.EGT probes

D.all of them

5.___________ signal conditioner calculates and monitors vibration levels of each engine.

( d )

A.N1

B.N2

C.EGT

D.A VM

6.The DEUs use digital input from the EEC to show __________ engine parameters on the CDS. ( d )

A.N1

B.N2

C.EGT

D.all of them

7.If there is an exceedance stored in memory for the current flight leg , the box ground the digital readout shows _________ . ( a )

A.red

B.amber

C.green

D.blue

8.The engine indicating system starts a new leg for exceedances when the airplane speed is more than _________. ( c )

A.40 knots

B.60 knots

C.80 knots

D.100 knots

9.The DEUs hold up to ________ exeedances per flight leg. ( c )

A.6

B.8

C.10

D.12

10.The DEU erases the oldest exceedance only when a _________ leg with exceedances occurs. ( d )

A.seventh

B.eighth

C.nineth

D.tenth

11.The N1 sensor has ________ independent sensing elements at its end . ( c )

A.one

B.two

C.three

D.four

12.The N2 speed sensor supplies the _________ pressure rotor speed signal. ( b )

A.low

B.high

C.normal

D.abnormal

13.The N1 digital readout shows the engine _________ pressure rotor speed. ( a )

A.low

B.high

C.normal

D.abnormal

14.The N1 redline shows the _______ certified engine low pressure rotor speed for the CFM56-7 engine. ( d )

A.average

B.abnormal

C.minimum

D.maximum

15.The ENG FALT message shows in __________. ( b )

A.red

B.amber

C.blue

D.yellow

16.The EGT system has _______ thermocouples and four T49.5 thermocouple harness assemblies. ( c )

A.six

B.seven

C.eight

D.nine

17.________ supplies the EGT signals to the DEUs to show on the CDS. ( a )

A.EEC

B.ADIRU

C.FMC

D.CDU

18.The EGT digital readout shows EGT in ____________. ( a )

A.degree celsius

B.degree fahrenheit

C.number

D.colour

19.The indications of EGT change to _________ when the EGT is more than the EGT maximum continuous limit. ( d )

A.yellow

B.blue

C.red

D.amber

20.When the exhaust gas temperature goes back to the normal range , the indication colour gose to ___________. ( c )

A.green

B.blue

C.white

D.black

Key:

1.d

2.a

3.d

4.d

5.d

6.d

7.a

8.c

9.c 10.d

11.c 12.b 13.a 14.d 15.b 16.c 17. a 18.a 19. d 20.c

ATA78

1.ATA78 talks about ___________. ( a )

A.exhaust

B.engine fuel and control

C.air

D.engine indicating

2.The engine exhaust system controls the _________ of the engine exhaust gases. ( c )

A.temperature

B.speed

C.direction

D.all of them

3.The thrust reverser system changes the ___________ of the fan air exhaust to help create reverse thrust. ( d )

A.speed

B.trust force

C. flow

D.direction

4.The flight crew uses reverse thrust to slow the airplane after landing or during a ___________. ( c )

A.cruise

B.approach

C.RTO

D.approach

5.Each T/R has _______ half. ( b )

A.one

B.two

C.three

D.four

6.Each half has a translating sleeve, the two sleeves work ___________ from each other.

( a )

A.independently

B.toghther

C.dependently

D.all of them

7.The exhaust nozzle assembly has _________ components. ( d )

A.inner sleeve

https://www.wendangku.net/doc/9e17614394.html,byrinth seals

C.fairing

D.all of them

8.The nozzle fences control the ________ of the fan air exhaust over the nozzle assembly.

( a )

A.airflow

B.speed

C.direction

D.temperature

9.Do the ________ procedure to prevent the operation of the thrust reversers. ( b )

A.stop

B.deactviation

C.stap

D.reset

10.T/R system has __________ subsystem. ( d )

A.thrust reverser

B.control

C.indicating

D.all of them

11.The T/R indicating system supplies T/R system and T/R control system indication in the

__________ . ( b )

https://www.wendangku.net/doc/9e17614394.html,nding gear compartment

B.flight compartment

C.equipment compartment

D.passenger compartment

12.The thrust reverser system has ________ subsystem. ( d )

A.thrust reverser system

B.thrust reverser control system

C.thrust reverser indicating system

D.all of them

13.T/R system has ________ thrust reversers. ( a )

A.two

B.four

C.six

D.eight

14.Rotary flex shafts make sure that the hydraulic actuators ________ and __________ at the same rate. ( a )

A.extend , retract

B.extend , deploy

C.start , stop

D.none of them

15.You give a ___________ signal to the control system when you raise a reverse thrust lever. ( b )

A.retract

B.deploy

C.stow

D.stand by

16.You supply a _________ signal when you return the reverse thrust lever to the stow position. ( c )

A.retract

B.deploy

C.stow

D.stand by

17.Translating sleeve position data to the _____________. ( d )

A.CDS

B.DEU

C.FMC

D.EEC

18.The reverser light comes on for ________ seconds during a T/R stow operation. b )

A.8

B.10

C.12

D.14

19.The sleeves are in the __________ position when they are in the full forward position.

( c )

A.retract

B.deploy

C.stow

D.stand by

20.The EAU supplies front panel ___________ to help you do troubleshooting of the control system. ( b )

A.CDS

B.BITE

C.FMC

D.EEC

Key:

1.a

2.c

3.d

4.c

5.b

6.a

7.d

8.a

9.b 10.d

11.b 12.d 13.a 14.a 15.b 16.c 17. d 18.b 19. c 20.b

ATA79

1.ATA79 talks about ____________. ( c )

A.exhaust

B.engine fuel and control

C.oil

D.engine indicating

2.what the engine oil do? ( d )

A.lubricate the bearings and gears

B.cool the bearings and gears

C.clean the bearings and gears

D.all of them

3.which cricuit does not belong to the oil distribution system? ( d )

A.supply

B.scavenge

C.vent

D.storage

4.The supply circuit sends oil to ________ the engine bearings and gears. ( a )

A.lubricate

B.pressurize

C.heat

D.depressurize

5.The lubrication unit pressurizes and ________ the oil. ( c )

A.heats

B.cools

C.filters

D.stores

6.The scavenge circuit takes the oil from the ________. ( a )

A.engine

B.fuel tank

C.lubrication unit

D.main oil/fuel heat exchanger

7.The vent circuit balances the __________ air pressures in the oil system. ( b )

A.external

B.internal

C.external and internal

D.engine

8.The functions of the engine oil tank is ______________. ( c )

A.contains the engine fuel

B.removes the air from the supply oil

C.lets you do an oil level check and fill the oil system

D.storage the engine fuel

9.You must do an oil level check and fill the engine oil tank for ____________. ( d )

A.normal servicing

B.after replacement of an oil system component

C.engine oil change

D.all of them

10.The oil flow s to the lubrication unit through the __________. ( b )

A.leakage valve

B.anti-leakage valve

C.oil bypass valve

D.depressure valve

11.The oil tank access door is on the side of the _______ fan cowl. ( a )

A.right

B.left

C.upside

D.downside

12.You must do an oil level check and fill the engine oil tank for _______ conditions. ( d )

A.normal servicing

B.after replacement of an oil system component

C.engine oil change

D.all of them

13.Do not remove the filler cap of the oil tank for _________ minutes after an engine shutdown.

( d )

A.2

B.3

C.4

D.5

14.The oil flows out of the lubrication unit in three lines to lubricate: _____________.

( d )

A.TGB

B.rear sump

C.AGB

D.all of them

15.The oil supply filter and the ________ chip detectors are in the lubrication unit.

( c )

A.one

B.two

C.three

D.four

16.The supply oil filter is in the ___________. ( a )

A.lubrication unit

B.oil/fuel eat exchanger

C.oil tank

D.anti-leakage valve

17.When the filter clogs , the supply oil filter _________ opens. ( c )

A.leakage valve

B.anti-leakage valve

C. bypass valve

D.depressure valve

18.The __________ collect and keep the unwanted materials from the scavenge oil. ( b )

A.leakage valve

B.chip detectors

C.filter

D.sump

19.There are three chip detectors , one for each __________ scavenge circuit. ( d )

A.forward sump

B.rear sump

C.AGB and TGB

D.all of them

20.The ________ sends oil to the inlet of the AGB/TGB scavenge pump when the supply pressure is too high. ( d )

A.leakage valve

B.anti-leakage valve

C.oil bypass valve

D.pressure relief valve

Key:

1.c

2.d

3.d

4.a

5.c

6.a

7.b

8.c

9.d 10.b

11.a 12.d 13.d 14.d 15.c 16.a 17. c 18.b 19. d 20.d

ATA80

1.ATA80 talks about __________ . ( c )

A.exhaust

B.engine fuel and control

C.starting

D.engine indicating

2.The engine starting system uses __________ power to turn the engine's N2 rotor during a start or motor procedure. ( a )

A.pneumatic

B.air

C.fuel

D.heat

3.Pneumatic power comes from ____________. ( d )

A.APU

B.pneumatic

C.opposite engine

D.all of them

4.Which components control the engine start system _________ . ( d )

A.flight compartment switches

B.DEU

C.EEC

D.all of them

5.You put the engine start switch to the _________ position to turn the engine with the starter. ( a )

A.GRD

B.GPD

C.STANDBY

D.GOD

6.The crew uses the _________ position to start the engine in flight when the starter is not necessary. ( a )

A.FLT

B.FIT

C.GRD

D.GOD

7.________ is on the right side of the engine fan case at the 2:00 position,after looking forward. ( d )

A.DEU

B.DIS

C.TEE

D.EEC

8.The start valve opens for ___________ engine operations. ( d )

A.grand start

B.in flight start which require starter assist

C.motoring

D.all of them

9.The start valve is a ___________ shut off valve. ( c )

A.round

B.square

C.butterfly

D.circle

10.The _________ energizes when you put the engine start switch to the GRD position.

( a )

A.valve solenoid

B.valve line

C.valve bus

D.valve switch

11.The starter changes air _________ into mechanical energy. ( b )

A.speed

B.pressure

C.temperature

D.flow

12.The start has a ____________ turbine air motor. ( a )

A.single-stage

B.double-stage

C.triple-stage

D.quadruple-stage

13.The starter has _______ port for oil drain and fill. ( a )

A.one

B.two

C.three

D.four

14.The oil cools and lubricates the starter:__________. ( d )

A.clutch

B.gears

C.bearings

D.all of them

15._________ use input data to show engine parameters and start valve position on the CDS. ( a )

A.DEU

B.EEC

C.FGC

D.LCD

16.You move the engine start lever to the _________ position to add fuel and ignition during the start. ( d )

A.fast

B.emergence

C.stayby

D.idle

17.EEC stops the engine start if the EGT does not rise in ________ seconds after you move the engine start lever to the idle position. ( b )

A.10

B.15

C.20

D.25

18.The EGT digital display ________ when the EEC sees a possible hot start. ( c )

A.becomes red

B.becomes amber

C.flashes

D.bright

19.You can use the _________ to troubleshoot problems when the engine does not start.

( c )

A.EEC

B.DEU

C.CDU

D.FMC

20.You must monitor ___________ parameters during engine starting. ( d )

A.N1

B.N2

C.EGT

D.all of them

Key:

1.c

2.a

3.d

4.d

5.a

6.a

7.d

8.d

9.c 10.a

11.b 12.a 13.a 14.d 15.a 16.d 17. b 18.c 19. c 20.d

五年级数学五月份月考检测题及答案

五年级 数学试卷 (全卷共五个大题,共36个小题,共8页;满分100分,考试用时120分钟) 注意事项:1.本卷为试题卷,考生解题作答必须在答题卡上,答案书写在答题卡相 应的位置上,在试题卡、草稿纸上作答无效。 2.考试结束时,请将答题卡和试卷一并交回。 一、判断题。(在答题卷上正确的涂“√”,错误的涂“×”。含1-10小题,每小题1分,共10分)。 1、一个自然数不是质数,就是合 数。 (×) 2、两个质数的和一定是偶 数。 (×) 3、体积单位比面积单位 大。 (×) 4、棱长6厘米的正方体,表面积和体积相等。 (√) 5、一个数最小的倍数一定是这个数本 身。 (√) 6、1吨大米吃掉65吨,还剩下1吨大米的6 1 。 (√) 7、一个分数的分子与分母是互质数,那么这个分数就是最简分数。 (√ ) 8、体积相等的两个长方体,它们的表面积也一定相等。 ( × ) 9、5 1 的分子加上5要使分数的大小不变分母也得加上5。 ( × ) 10. 5 4 108和的大小相等,它们的分数单位也相等。 ( ×) 二、选择题。(含11-15小题,每小题1分,共5分)。 11. 几个质数连乘的积是( B )。 A.质数 B.合数 C.偶数 D.奇数 12. 要使7a 是真分数,6a 是假分数,a 应是(B ) 。 A.5 B.6 C.7 13. 一个正方体的棱长扩大3倍,它的体积扩大( D )倍。 A.3 B.9 C.15 D.27 14. 正方体的边长是4厘米,则它的表面积是( B )。 A.16平方厘米 B.96平方厘米 C.96立方厘米 D.64立方厘米 15. 长方体的长、宽、高分别是8厘米、4厘米、6厘米,则它的棱长

五年级语文下册第一次月考综合试题

五年级语文下册第一次月考综合试题班级:姓名:分数:考试时间:90分钟 题序一二三四五六七总分 得分 一、读拼音,写词语。(10分) chóu xièhǎo dǎi chē liàng hòu huǐbēng tā fāshìsǎo zi tuō fùjiāo jíjiān yù 二、比一比,再组词。(10分) 赢(_________)驶(_________)瀚(_________)简(_________)羸(_________)使(_________)翰(_________)筒(_________)枚(_________)箭(_________)赤(_________)啸(_________)玫(_________)剪(_________)赫(_________)肃(_________) 三、把成语补充完整,并按要求填空。(15分) (____________)有力(______)所(______)然人影(___________)负(_____)请(_____)(_____)衣(_____)食(_____)通人(____)造句________________ 四、选择恰当的关联词语填空。(10分) 无论……只要……就……如果……就……只要……就…… (1)( )前面的人突然停住,后边的人没处落脚,( )会掉进水里。

(2)上了点年岁的人,( )怎样急着赶路,( )发现哪块搭石不平稳,( )一定会找来合适的石头搭上。 (3)( )是有心人,( )能从不起眼的事物中发现美。 五、按要求写句子。(15分) (1)写出下列加点字表述的成语,并造句。 ①班长马宝玉说话或行动坚决果断,毫不犹豫地说了一声“走!” 成语:() 造句: ②战士们抬起头,挺起胸膛,相继从悬崖往下跳。 成语:() 造句: (2)这是英雄的中国人民坚强不屈的声音!(改为反问句) _______________________ _________________ (3)随着一声巨响,手榴弹在敌群中爆炸了。(改为比喻句) _______________________________ _________ 六、阅读短文,回答问题。(20分) 中国空间站 ①空间站又称太空站、航天站,是一种在近地轨道长时间运行,可供多名航天员巡访、长期工作和生活的载人航天器。空间站体积比较大,结构复杂,在轨道飞行时间较长,有多种功能,能开展的太空科研项目也多而广。 ②中国空间站包括核心舱、一二号实验舱、载人飞船和货运飞船。各飞行器既具备独立的飞行能力,又可以与核心舱组合成多种形态的空间组合体,在核心舱统一调度下协同工作,完成空间站承担的各项任务。 ③核心舱全长约18.1米,最大直径约4.2米,发射质量20~22吨。核心舱模块分为节点舱、生活控制舱和资源舱。主要任务包括为航天员提供居住环境,支持航天员的长期在轨驻留,支持飞船和扩展模块对接停靠并开展少量的

会计基础第一章总论练习题答案解析.doc

第一章总论 一、单项选择题 1、下列各项中,()属于企业在一定时期内为生产一定种类、一定数量的产品所支出的各种费用总和。 A、直接成本 B、间接成本 C、制造成本 D、制造费用 【正确答案】 C 【答案解析】企业在一定时期内为生产一定种类、一定数量的产品所支付的各种费用的总和,就是这些产品的成本、也称为制造成本。 【该题针对“会计核算的具体内容”知识点进行考核】 2、下列各项中,属于以货币表现的经济活动的是()。 A、资金运动 B、货币活动 C、营销活动 D、资产运动 【正确答案】 A 【答案解析】以货币表现的经济活动通常又称为资金运动。【该题针对“会计基本假设,货币计量”知识点进行考核】 3、下列属于会计主体假设的意义的是()。 A、明确了会计确认、计量和报告的空间范围

B、使会计人员可以选择适用的会计原则和会计方法 C、为会计核算确定了时间范围 D、为会计核算提供了必要手段 【正确答案】 A 【答案解析】会计主体是指会计所核算和监督的特定单位或者组织,是会计确认、计量、记录和报告的空间范围。 【该题针对“会计基本假设,会计主体”知识点进行考核】 4、()是会计工作的基础。 A、会计记录 B、会计分析 C、会计核算 D、会计检查 【正确答案】 C 【答案解析】会计核算是会计工作的基础。 【该题针对“会计的基本职能”知识点进行考核】 5、形成权责发生制和收付实现制不同的记账基础,进而出现应收、应付、预收、预付、折旧、摊销等会计处理方法所依据的会计基本假设是()。 A、货币计量 B、会计年度 C、持续经营 D、会计分期 【正确答案】 D

【答案解析】会计分期是应收、应付、预收、预付、折旧、摊销等会计处理方法所依据的会计基本假设。 【该题针对“会计分期”知识点进行考核】 6、关于会计主体的概念,下列各项说法中不正确的是()。 A、可以是独立法人,也可以是非法人 B、可以是一个企业,也可以是企业内部的某一个单位 C、可以是一个单一的企业,也可以是由几个企业组成的企业集团 D、会计主体所核算的生产经营活动也包括其他企业或投资者个人的其他生产经营活动 【正确答案】 D 【答案解析】会计主体核算的只是主体本身的生产经营活动,不包括主体之外的其他企业或投资者个人的其他生产经营活动。【该题针对“会计主体”知识点进行考核】 7、界定从事会计工作和提供会计信息的空间范围的会计基本前提是()。 A、会计职能 B、会计主体 C、会计内容 D、会计对象 【正确答案】 B 【答案解析】会计主体是指会计工作为其服务的特定单位或组织,它的主要作用在于界定不同会计主体会计核算的范围。 【该题针对“会计主体”知识点进行考核】

2020学年二年级语文下学期3月份月考检测试题(无答案)新人教版

乡镇 学校 班级 姓名 学号 二年级语文3月份月考检测试题 考试时间:60分钟 满分:100分 一. 给划线字选择正确的读音打对号。(6分) 的确(de d í) 饲养(s ī s ì) 柔软(ru ǎn r ǎn) 泥泞(n íng n ìng) 堤岸(t ī d ī) 一堆(du ī zu ī) 二、读拼音,写词语。(11分) x ún zh ǎo y ? hu ā y óu j ú zu ò k è l ? w ù z ú j ì w ēn nu ǎn n án d ào q ?ng qi ú zh ù m ǎn li àn li àn b ù sh ? 三、辨字组词。(8分) 味( ) 冒( ) 洒( ) 锋( ) 未( ) 帽( ) 酒( ) 峰( ) 四.先把词语补充完整,再按要求填空。(5分) A.五颜( )( ) B.碧空( )( ) C.引人( )( ) D.兴致( )( ) 1.像A 组词语这样含有数字的词语还有 、 。 2.像B 组词语这样描写天气的词语还有 、 。 3.像D 组词语这样ABCC 式结构的词语还有 、 。 五、填写合适的词语。(6分) ( )的天空 ( )的阳光 ( )的田野 ( )的小路 ( )的柳条 ( )的风景 六、连一连(4分) 小草 春天的音符 邓小平爷爷 珍惜劳动成果 野花 春天的眉毛 雷锋 一丝不苟 嫩芽 春天的琴声 千人糕 教育智慧 小溪 春天的眼睛 一匹出色的马 助人为乐 七、照样子,仿写句子并加上合适的标点符号。(6分) (1)小草从地下探出头来,那是春天的眉毛吧? _______________________________________________________ (2)田野葱葱绿绿的,像一片柔软的绿毯。 _______________________________________________________ (3)我们沿着小河一边看,一边走。 八、按课文原文(原意)填空。(14分) 1.( )( )( )( )( )( )( ),忙趁东风放纸鸢。 2.不知细叶谁裁出,( )( )( )( )( )( )( )。 3.野火烧不尽,( )( )( )( )( )。 4.与其锦上添花,( )( )( )( )( )( )。 5.邓爷爷精心地( )( )了一棵茁壮的柏树苗,小心地( )( )树坑,又( )锹( )了几锹土。

(完整版)24点练习题大全

24点练习题大全 1 1 1 8 : (1+1+1)*8=24 1 1 2 6 : (1+1+2)*6=24 1 1 2 7 : (1+2)*(1+7)=24 1 1 2 8 : (1*1+2)*8=24 1 1 2 9 : (1+2)*(9-1)=24 1 1 2 10 : (1+1)*(2+10)=24 1 1 3 4 : (1+1)*3*4=24 1 1 3 5 : (1+3)*(1+5)=24 1 1 3 6 : (1*1+3)*6=24 1 1 3 7 : (1*1+7)*3=24 1 1 3 8 : (1-1+3)*8=24 1 1 3 9 : (1+1)*(3+9)=24 1 1 3 10 : (10-(1+1))*3=24 1 1 4 4 : (1+1+4)*4=24 1 1 4 5 : (1*1+5)*4=24 1 1 4 6 : (1-1+4)*6=24 1 1 4 7 : (7-1*1)*4=24 1 1 4 8 : (1+1)*(4+8)=24 1 1 4 9 : (4-1)*(9-1)=24 1 1 4 10 : (1+1)*10+4=24 1 1 5 5 : 5*5-1*1=24 1 1 5 6 : (5-1*1)*6=24 1 1 5 7 : (1+1)*(5+7)=24 1 1 5 8 : (5-(1+1))*8=24 1 1 6 6 : (1+1)*(6+6)=24 1 1 6 8 : 6*8/(1+1)=24 1 1 6 9 : (1+1)*9+6=24 1 1 7 10 : (1+1)*7+10=24 1 1 8 8 : (1+1)*8+8=24 1 2 2 4 : (1+2)*2*4=24 1 2 2 5 : (1+5)*(2+2)=24 1 2 2 6 : (1+2)*(2+6)=24 1 2 2 7 : (7-1)*(2+2)=24 1 2 2 8 : (2-1+2)*8=24 1 2 2 9 : (1+2+9)*2=24 1 2 2 10 : (1+2)*(10-2)=24 1 2 3 3 : (1+3)*2*3=24 1 2 3 4 : (1+2+3)*4=24 1 2 3 5 : (1+2)*(3+5)=24 1 2 3 6 : (3-1+2)*6=24 1 2 3 7 : 1+2+3*7=24 1 2 3 8 : (2-1)*3*8=24 1 2 3 9 : 3*9-(1+2)=24 1 2 3 10 : (10-1*2)*3=24 1 2 4 4 : (1+2)*(4+4)=24 1 2 4 5 : (5-1+2)*4=24 1 2 4 6 : (2-1)*4*6=24 1 2 4 7 : (1-2+7)*4=24 1 2 4 8 : (1-2+4)*8=24 1 2 4 9 : (9-(1+2))*4=24 1 2 4 10 : 1*2*10+4=24 1 2 5 5 : 1-2+5*5=24 1 2 5 6 : (1-2+5)*6=24 1 2 5 7 : 1*2*(5+7)=24 1 2 5 8 : (5-1*2)*8=24 1 2 5 9 : (1+2)*5+9=24 1 2 5 10 : 2*10-1+5=24 1 2 6 6 : (1+2)*6+6=24 1 2 6 7 : (7-(1+2))*6=24 1 2 6 8 : (6-(1+2))*8=24 1 2 6 9 : 1*2*9+6=24 1 2 6 10 : (1+2)*10-6=24 1 2 7 7 : (7*7-1)/2=24 1 2 7 8 : (1+7)*2+8=24 1 2 7 9 : 2*9-1+7=24 1 2 7 10 : 1*2*7+10=24 1 2 8 8 : 1*2*8+8=24 1 2 8 9 : 8*9/(1+2)=24 1 2 8 10 : 10+(8-1)*2=24 1 3 3 3 : (1+3)*(3+3)=24 1 3 3 4 : (1*3+3)*4=24 1 3 3 5 : 1*3*(3+5)=24 1 3 3 6 : (6-1+3)*3=24 1 3 3 7 : 1*3+3*7=24 1 3 3 8 : (1+8)*3-3=24 1 3 3 9 : (1+3)*(9-3)=24 1 3 3 10 : (1-3+10)*3=24 1 3 4 4 : (4-1+3)*4=24 1 3 4 5 : 1+3+4*5=24 1 3 4 6 : 6/(1-3/4)=24

六年级语文下册第一次月考综合试题

六年级语文下册第一次月考综合试题 (时间:60分钟满分:100) 班级:姓名:分数: 一、看拼音写词语,把字写匀称。 lǜtǎn yī shang tiào wàng bèn zhu ō qízhìgēbǎn huālěi jǔsàng 二、给加点字选择正确的读音,打“√”。 王侯.(hóu hòu)机杼.(shūzhù)泣涕.(tì dì)盈盈.(yín yíng) 日暮.(mù mò)皎皎.(jiǎo jiāo)擢.(zhái zhuó)迢迢.(tiáo zhāo) 三、形近字组词。 贷(______)溜(______)偎(______)靴(______)捡(______)货(______)榴(______)喂(______)鞋(______)拣(______) 四、将下列词语补充完整,并选词填空。 一碧(____)里襟(____)带(____)(____)影自怜 孤芳自(____)硕大无(____)心驰(____)往 1.文章一开始就诉说了作者怀才不遇、(__________)的境遇。 2.长江三峡,多么美丽,多么迷人,一直是我(__________)的地方。 3.这个地瓜真是(____),实属罕见。 五、选词填空。 消逝流逝 1.时光如水,匆匆(______)。 2.光线正无可挽回地(______),一派荒凉。 盼望渴望期望 3.在战争年代,孩子们多么(______)能够有一本教科书啊! 4.我还记得我的第一次(______)。那是一个星期天,从早晨到下午,一直到天色昏暗下去。 5.我们不能辜负老师对我们的殷切(______)。 六、按要求写句子。 1.稚嫩的我忐忑不安地跨进校门。(缩句) ____________________________________________ 2.父亲鼓励我说:既有一,就能有二。(改为反问句) ________________________________________ 3.一个个娟秀端庄的方块字排列在黑板上。(改为比喻句) ____________________________________ 4.不知从什么时候起,您满头的青丝冒出了一根根白发。(仿写向子) 不知从什么时候起,________________________________________ 七、根据课文理解填空。 1.《北京的春节》的作者是现代著名作家_____原名________。文章以________为顺序,细致地描写了老北京春节的一系列________,重点写了________、________、________、________和 __________这几天,反映出老北京人_____________、_____________的心愿。 2.《腊八粥》是作家________的作品,写出了一家人__________的亲情,表现出作者对普通百姓生活的_______和对家庭亲情的_______。 3.《迢迢牵牛星》选自___________。此诗借民间传说中______、______(牛郎、织女)被银河阻隔而不得会面的悲剧,抒发了女子___________之情,写出了人间夫妻不得团聚的______。 4.《十五夜望月》是唐代诗人______的诗作。全诗前两句______,后两句抒发了诗人

医学影像学第一章 总 论 练习题

第一篇总论练习题 一、单项选择题(共13题,每题3分,共39分。)1.下述X线特性中,不属于物理效应的是() A.穿透性 B.荧光作用 C.生物效应 D.热作用 E.电离作用 2.孕妇需尽量避免X线检查,是因为() A.X线的光化学效应 B.X线的荧光作用 C.X线的生物作用 D.X线的感光效应 E.以上都不是 3.X线球管中的阴极产生大量的自由电子是通过() A.高电压、小电流 B.低电压、大电流 C.只需电流 D.低电压、小电流 E.高电压、大电流 4.标准后前位立位胸片,焦片距应为() A.0~0.5m B.0.5~1.0m C.1.0~1.5m D.1.5~2.0m E.1.8~2.0m 5.有关副鼻窦摄影的常规位置的描述中正确的是()

A.柯氏位、瓦氏位 B.斯氏位 C.劳氏位 D.瑞氏位 E.汤氏位 6.关节前后位摄片,中心线应对准()A.髌骨中心 B.髌骨下缘 C.髌骨上缘 D.髌骨下缘并向头侧倾斜15度 E.髌骨下三分之一处 7.软X线摄影的管电压值应是() A.20KV以下 B.40KV以下 C.60KV以下 D.80KV以下 E.120KV以上 8.下列哪一种物质可用作阴性造影剂()A.泛影葡胺 B.空气 C.40%碘化油 D.5%碘化钠溶液 E.钡剂 9.静脉肾盂造影的禁忌证不包括() A.碘过敏 B.严重的甲状腺机能亢进 C.腹部巨大肿块 D.严重肝肾功能衰竭 E.急性泌尿系炎症及严重血尿、肾绞痛 10.下列成像方法,哪一种较少用于胸部()A.平片 B.支气管分层

C.CT D.MRI E.超声 11.胸片常规摄片位指的是() A.立位前后位 B.立位后前位 C.卧位前后位 D.卧位后前位 E.右侧位 12.下列哪一项措施不能减少医患人员接受的X线照射剂量() A.隔室操作 B.用高速增感屏 C.用滤线栅 D.使用遮光器 E.穿戴个人防护服 13.与普通血管造影相比,下述哪一项不是DSA 的优点() A.密度分辨率高 B.空间分辨率高 C.有利于靶血管的实时观察 D.可后处理图像 E.可反复动态观察 二、填空题(每空2分,共10分。) 14. X线具有与X线成像相关的特性有:穿透性、荧光效应、摄影效应和电离效应。15.放射防护在技术方面,可以采取屏蔽防护和距离防护原则。

初一数学月考试题测试题

231 2 初一数学测试题 一、选择题(每小题3分,共30分,请将答案填写在答题纸的表格中) 1. 下列说法中,正确的个数是( ). ①柱体的两个底面一样大;②圆柱、圆锥的底面都是圆;③棱柱的底 面是四边形;④长方体一定是柱体;⑤棱柱的侧面一定是长方形 . (A 2 个 ( B )3 个 (C ) 4 个 (D ) 5 个 2. 一个数加上—12得—5,那么这个数为( ) B 、 2 4. 某物体的三视图是如图所示的三个图形, (A )长方体 (B )圆锥体 (C )立方体 (D )圆柱体 5.计算: (5) (3) (9) (7) 1 2所得结果正确的是( A 17 B 、7 C 、一 17 ) (D ) 主观圉 左视閤 俯视置

6.—个数是3,另一个数比它的相反数大3,则这两个数的和为() A. 3 B. 0 C. —3 D. 士3 7. 下列各个平面图形中,属于圆锥的表面展开图的是() (D) 8如图是由一些相同的小正方体构成的立体图形的三种视图: 构成这个立体图形的小正方体的个数是(). A 5 B . 6 C . 7 D . 8 9. 下列说法中正确的是()

主视图 俯视图 左视图 A. 若两个有理数的和为正数,则这两个数都为正数 B. 若两个有理数的和为负数,则这两个数都为负数 C. 若两个数的和为零,则这两个数都为零 D. 数轴上右边的点所表示的数减去左边的点所表示的数的差是正数 10. 如图,是一个正方体纸盒展开图,按虚线折成正方体后,若使相 对面上的两数互为相反数,则 A B C 表示的数依次是( ) 3 3 5 、一 、5、一 C (A ) 2 (B) 2 1宀! 4 ; B 5 IT 3 3 4 5 —、 5、、一 2 (C ) 2 (D) 2 第10题图 、(每小题3分,共18分) 11 .一个数是—2,另一个数比—2大—5,则这两个数的和是 13.在数轴上距离 -1 为 3 的点所对应的数为 ____ 12.桌面上放两件物体, 它们的三视图如下图示, 则这两个物体分别

小学四年级算24点比赛试题

四年级算24点比赛试题 (时间:40分满分100分) 学校班级姓名得分一、算24点。(每题3分,共60分) 例:2 4 4 8 4+8=12,4-2=2,12×2=24。或(4+8)×(4-2)=24。 (1)1,4 ,7 ,7 (2)1 ,7 ,7,9 (3)3 ,3,5,7 (4)4,5,5,7 (5)1,5 ,7 ,10 (6)1 ,4 ,4,9 (7)5 ,6 ,7 ,9 (8)4,4 ,7,8 (9)1,3 ,10,10 (10)2,2 ,4,4 (11)5,8,8,8 (12)1,2 ,8,10 (13)6 ,6,9,10 (14)3,3,3 ,10 (15)2 ,3 ,10 ,10 (16)8,8,8,10 (17)7 ,8,8,10 (18)1,3 ,3,6 (19)3,3 ,3,5 (20)4 ,4 ,8,9

二、用三种方法算24点。(每题5分,共40分,算对一种得2分,算对二 种得4分,算对三种得5分) 说明:调换加数、因数顺序,调换加减、乘除运算顺序,除以1与乘1均视作同种算法。 例:2 4 8 10 第一种: 2+4=6,6+8=14,14+10=24。或2+4+8+10。第二种: 10-2=8,4×8=32,32-8=24。或(10-2)×4-8=24。第三种: 2+10=12,8×12=96,96÷4=24。或8×(2+10)÷4=24。 (1)3,4,4 ,6 第一种: 第二种: 第三种: (2) 4 ,6 ,7 ,7 第一种: 第二种: 第三种: (3) 2 ,3 ,4 ,10 第一种: 第二种: 第三种: (4)3,8,10 ,10 第一种: 第二种: 第三种: (5) 2 ,2,8 ,8 第一种: 第二种: 第三种: (6)1,2 ,3 ,10 第一种: 第二种: 第三种: (7)1,3,4 ,7 第一种: 第二种: 第三种: (8)3,4,9 ,9 第一种: 第二种: 第三种:

人教版二年级语文下册第一次月考综合试题及答案

人教版二年级语文下册第一次月考综合试题及答案 班级: 姓名: 满分:100分 考试时间:90分钟 题序 -一一 -二二 ^三 四 五 六 七 总分 得分 、我会读拼音,写词语。(20分) .二、 比一比,再组词。 (10 分) 挂( ) 快( ) 治( )那( ) 洼( ) 块( ) 抬( )哪( ) 三、 读一读,连一连。(10分) 彩云 盛开 绿绿的 竹叶 柳枝 飘动 弯弯的 草坪 鲜花 鸣叫 蓝蓝的 天空 小鸟 发芽 青青的 小路 四、想一想,选词填空。(10分) ①著名 ②闻名 ③有名 1. 黄山风景区( _____ )中外,我一定要爸爸带我去看看 2. 不用说,这就是(— 的 金鸡叫天都”了。 3. ______________________________ 我老家出产的红富士苹果非常( ) —1— t ? ,a , ^" B 云 v X —1—1 * d dd ----- 1 ---- 1 v -- 1 - t ■ h 血 y dn g zh 血 xi h chu on g w

④专心⑤用心 4?同学们上课时要(____ 听讲。 5. ___________ 狐狸的(十分明显。 ⑥窃窃私语⑦一言不发 6. _______________________ 那两个人躲在角落里()。 7. 他默默地坐在那里,(___ ),若有所思。 15 分) 五、照样子,按要求写句子。( 例:她总是想把我吃掉。 ⑴____________ 总是_____________ 。 例:公主被我们救出来了。我们把公主救出来了。 (2)脸被我用一颗露珠洗干净了。 六、阅读短文,回答问题。(20分) 天鹅湖 我的家乡有一个美丽的湖,名叫天鹅(?)湖。据(j u)说许多年以前,有一群天鹅在这里生活,因此而得名。 湖呈(ch岔g)圆形,湖水清可见底,绿得发亮。湖水的四周有茂(mdo)密(mi)的树木。其中引人注目的是垂(chu i)柳,在微(wei)风的吹拂(f U)下,柳条迎风起舞,看得出柳姑娘的身影(y ing)十分秀美。树下是一片嫩(n 6)绿的草地,草地上开着黄的、蓝(1印)的小花。湖上有一座美丽的小桥,把天鹅湖打扮(b m)得更加美丽。 哦,天鹅湖,故乡的湖,我爱你! 1 ?短文有____ 个自然段,第二段有—句话。 2?第二自然段先写了天鹅湖的湖水____________ ,_________ ,再写湖的四周有____________________ ,树下有 ______________ ,开着______________ 色

高一化学上册月考检测试题

一选择题(每题只有一个正确答案。每题2分共50分) 1对危险化学品要在包装上印上警示性标志,下列化学品的名称与警示性标志名称 对应正确的是() A.烧碱——爆炸品B.浓硫酸——剧毒品 C.汽油——腐蚀品D.酒精——易燃品 2.下列实验操作中错误的是()。 A.用规格为10mL的量筒量取6mL的液体 B.用药匙或者纸槽把粉末状药品送入试管的底部 C.过滤时玻璃棒的末端应轻轻靠在三层的滤纸上 D.如果没有试管夹,可以临时手持试管给固体或液体加热 3.检验某未知溶液中是否含有SO2-4,下列操作最合理的是() A.先加稀*酸化,再加入Ba(NO3)2溶液 B.加BaCl2溶液即可 C.先加盐酸酸化,再加BaCl2溶液 D.加Ba(NO3)2溶液即可 4.使用分液漏斗进行分液时,正确的操作是() A.上层液体从漏斗下口放出 B.分离液体时,将漏斗拿在手上进行分离 C.分离液体时,分液漏斗上的小孔与大气相通时打开活塞 D.若分液时不小心有少量上层液体流下来,补救措施是用滴管将其从烧杯中吸出 5.现有三组溶液:①汽油和氯化钠溶液②39%的乙醇溶液③氯化钠和单质溴的水溶液, 分离以上各混合液的正确方法依次是() A.分液、蒸馏、萃取B.萃取、蒸发、分液 C.分液、萃取、蒸馏D.蒸馏、萃取、分液 6.NA表示阿伏加德罗常数的值,下列说法正确的是 A.在0℃,101kPa的条件下,22.4LH2含有的分子数为NA B.在同温同压下,22.4L的二氧化碳和32g氧气所含分子数都为NA C.标准状况下,22.4LH2O的分子数为1NA D.常温常压下,5.6LCH4含有的分子数为0.25NA 7.同温同压下,等质量的下列气体所占有的体积的是 A.O3B.CH4C.COD.N2 8.已知3.01×1023个X气体分子的质量为16g,则X气体的摩尔质量是 A.16gB.32gC.64g/molD.32g/mol 9.0.5L1mol/LFeCl3溶液与0.2L1mol/LKCl溶液中的Cl-的数目之比() A.5:2B.3:1C.15:2D.1:3 10.欲配制100mL1.0mol/LNa2CO3溶液,正确的方法是() ①将10.6gNa2CO3溶于100mL水中 ②将28.6gNa2CO3?10H2O溶于少量水中,再用水稀释至100mL ③将20ml5.0mol/LNa2CO3溶液用水稀释至100mL A.①②B.②③C.只有②D.只有③ 11、在同温同压下,A容器中的氧气(O2)和B容器中的氨气(NH3)所含的原子个数相同,则A、B两容器中气体的体积之比是() A、1:2 B、2:1 C、2:3 D、3:2

2020年一年级数学下册第四次月考综合试题及答案(二套)

2020年一年级数学下册第四次月考综合试题及答案 (二篇) 目录: 2020年一年级数学下册第四次月考综合试题及答案一2020年一年级数学下册第四次月考考点题及答案二

2020年年级数学下册第次月考综合试题及答案一班级:姓名:满分:100分考试时间:90分钟 题序一二三四五总分 得分 一、我会算。(20分) 3+5=2+5=6+2=3+2= 8-4=9-6=10-3=9-4+5= 3+3+4=10-6-3=4+5-3=5-4+3= 二、填空题。(20分) 1、一个两位数,十位上的数是 6,个位上的数是 9,这个数是(______),和这个数相邻的两个数分别是(______)和(______)。 2、看钟表填写时间。 (_____)(_____)(_____)(_____) 3、98比90多(_____),9比16少(_____)。 4、最大的一位数是(____),最小的两位数是(____),它们的和是(____),差是(____)。 5、19里有________个十和________个一。 6、和11相邻的两个数是(________)和(________)。 7、18元8角7分5元5角10元2元9角 (_____)>(_____)>(_____)>(_____)>(_____) 8、一个加数是10,另一个加数是8,和是(________)。

9、最小的自然数是(______)。 10、与最小的七位数相邻的两个数分别是(____________)和(___________)。 三、选择题。(10分) 1、一班有女生26名,男生比女生少4名,男生有()名。 A.22B.23 C.24 2、下列数中,()比76大,比79小。 A.89 B.58 C.76 D.78 3、小强面向东南方,他的背面是()方。 A.东北 B.西北 C.西南 4、下面图中不同类的是()。 A.B.C.D. 5、小东比小明多3朵花,小红有8朵花,则小东有()朵花。 A.5B.11 C.无法确定 四、数一数,填一填。(10分) 有(____)个有(____)个 有(____)个有(____)个有(____)个 五、解决问题。(30分)

第一章 总论习题

第一章总论 一、名词解释 持续经营假设货币计量假设谨慎性原则权责发生制 划分收益性支出与资本性支出原则实质重于形式原则 二、判断题 1.会计核算的可比性原则,要求同一会计主体在不同时期尽可能采用相同的会计程序和会计处理方法,以便于不同会计时期会计信息的纵向比较。() 2.我国所有企业的会计核算都必须以人民币作为记账本位币。() 3.法律主体必定是会计主体,会计主体不一定是法律主体。() 4.会计分期是企业正确选择会计政策的前提和基础。() 5.持续经营是产生权责发生制和收付实现制等不同记账基础的前提。() 6.由于会计信息具有时效性,只有能够满足经济决策的及时需要,会计信息才有价值。() 7.如果一笔经济业务性质比较特殊,不单独反映就有可能遗漏一个重要事实,并且对会计信息使用者的决策产生重大影响的情况下,会计处理必须严格核算,单独反映。 () 8.相关性要求企业对外提供的会计报表不仅要满足共性的信息需求,也要满足特定用途的信息需求。() 9.某一会计事项是否具有重要性,很大程度上取决于会计制度的规定,而不是取决于会计人员的职业判断。所以,一个事项在某一企业具有重要性,在另一企业则也具有重要性。() 10.会计核算应当区分自身的经济活动与其他单位经济活动。() 三、填空题 1.稳健原则是指在会计核算中应对企业可能发生的__________和__________,作出合理估计。 2.配比原则是将一个会计期间的__________和为了收入所发生的__________配合起来进行比较,从而正确地计算出__________。 3.企业的会计核算必须站在_____________________的角度上观察所发生的经济业务,不能与其他会计主体相混淆。4.货币计量假设是指会计以__________为计量单位核算会计主体的经济活动,并假定在不同时期货币的__________是不变的。 5.凡支出的效益及于本会计年度,应作为_________,应作为_________处理;凡支出的效益及于本会计年度和以后会计年度,应作为_________,应在其获益期内_________。 6._____________是在特定的商品经济、市场经济环境中会计活动的基本前提,是基本会计准则和具体业务会计准则制定的依据,它构成会计准则的最高层次。 7.持续经营假设的目的,主要在于解决____________、___________等重要会计问题。 8.会计确认是解决__________问题,即解决“是不是”、“算不算”的问题;会计计量是解决___________问题,即解决“是多大”、“是多少”的问题。 9.会计的二重性决定了会计准则也具有___________和____________的属性。 10.会计管理体制一般包括________________、_______________、______________和___________________等内容。 四、单项选择题 1.导致权责发生制的产生,以及预提、摊销等会计处理方法的运用的基本前提或原则是() A.谨慎性原则B.历史成本原则C.会计分期D.货币计量 2.会计主体假设规定了会计核算的() A.时间范围B.空间范围C.成本开支范围D.期间费用范围 3.会计核算的一般原则中,要求前后期提供相互可比的会计信息的原则是() A.可比性原则B.一贯性原则C.配比原则D.权责发生制原则 4.企业发生的下列支出属于资本性支出的是() A.支付的生产工人工资

七年级语文下册第一次月考检测试题

七年级语文下册第一次月考检测试题七年级语文下册第一次月考检测试题 一:基础积累与运用(30分) 1.下列加点字注音,字形完全正确的一项是()(3分) A斑蝥脑髓督学钥匙 B诫尺屏嶂涉足秕谷 C木屐嫉妒骊歌懊悔 D哺育气魄咻咻惆傥 2.下列加点字解释有误的一项是()(3分) A骇人听闻(震惊)宿儒(长久从事某项工作) B攒在一起(凑在一块儿)滋长(滋生) C哽住(声气阻塞)荒草萋萋(草长得茂盛的样子) D亦复如是(对,正确)人声鼎沸(水开) 3.文学常识搭配有错的一项是()(3分) A《爸爸的花儿落了》——林海音——中国——自传体小说B《未选择的路》——弗罗斯特——美国——诗歌 C《最后一课》——都德——法国——短篇小说 D《木兰诗》——王安石——清朝——民歌 4.下列修辞判断错误的一项是()(3分) A他们该不会强调这些鸽子也用德语唱歌吧!(拟人)

B油蛉在这里低唱,蟋蟀们在这里弹琴。(对偶) C将军百战死,壮士十年归。(对偶,互文) D像你一样的伟大坚强!像你一样的伟大坚强!(反复) 5.下列表述错误的一项是()(3分) A《黄河颂》的歌词明快雄健,节奏鲜明,音节洪亮,同时注重 刻画黄河形象,营造歌的画面之美。 B《土地的誓言》将众多意象如织锦般地排列在一起,从而在文 章中形成一种气势的力度,这是作者内心情感的流露。 C《最后一课》的作者通过对主人公韩麦尔先生和小弗郎士的刻画,歌颂了法国人民的爱国精神。 D《木兰诗》有许多重复的句子,如“阿爷无大儿,木兰无长兄”等,这反应了古代民歌不成熟的地方。 6.下列翻译不正确的一项是()(3分) A其文理皆有可观者。译文:诗的文采可道理都有值得看的地方。 B其受之天也,贤于材人远矣。译文:他的天资,才能比一般人 要高得多。 C安能辨我是雄雌?译文:哪能辩别雄兔与雌兔吗? D但闻黄河流水鸣溅溅。译文:只能听到黄河哗啦啦的流水声。 7.对课文内容分析错误的一项是()(3分) A《从百草园到三味书屋》一文作者采用对比手法回忆童年趣事,表达了他对封建教育制度的不满和对自由生活的迫切追求。 B《丑小鸭》是一则童话,作者是法国作家安徒生。 C《伤仲永》一文的作者王安石认为仲永“泯然众人矣”的原因 在于“父利其然”和“不使学” D《假如生活欺骗了你》运用了象征手法,但没有直抒胸臆。

算24点练习题可打印附答案

题目: 1 1 1 8 : 1 1 2 6 : 1 1 2 7 : 1 1 2 8 : 1 1 2 9 : 1 1 2 10 : 1 1 3 4 : 1 1 3 5 : 1 1 3 6 : 1 1 3 7 : 1 1 3 8 : 1 1 3 9 : 1 1 3 10 : 1 1 4 4 : 1 1 4 5 : 1 1 4 6 : 1 1 4 7 : 1 1 4 8 : 1 1 4 9 : 1 1 4 10 :1 1 5 5 : 1 1 5 6 : 1 1 5 7 : 1 1 5 8 : 1 1 6 6 : 1 1 6 8 : 1 1 6 9 : 1 1 7 10 : 1 1 8 8 : 1 2 2 4 : 1 2 2 5 : 1 2 2 6 : 1 2 2 7 : 1 2 2 8 : 1 2 2 9 : 1 2 2 10 : 1 2 3 3 : 1 2 3 4 : 1 2 3 5 : 1 2 3 6 : 1 2 3 7 :

1 2 3 9 : 1 2 3 10 : 1 2 4 4 : 1 2 4 5 : 1 2 4 6 : 1 2 4 7 : 1 2 4 8 : 1 2 4 9 : 1 2 4 10 : 1 2 5 5 : 1 2 5 6 : 1 2 5 7 : 1 2 5 8 : 1 2 5 9 : 1 2 5 10 : 1 2 6 6 : 1 2 6 7 : 1 2 6 8 : 1 2 6 9 : 1 2 6 10 : 1 2 7 7 :1 2 7 9 : 1 2 7 10 : 1 2 8 8 : 1 2 8 9 : 1 2 8 10 : 1 3 3 3 : 1 3 3 4 : 1 3 3 5 : 1 3 3 6 : 1 3 3 7 : 1 3 3 8 : 1 3 3 9 : 1 3 3 10 : 1 3 4 4 : 1 3 4 5 : 1 3 4 6 : 1 3 4 7 : 1 3 4 8 : 1 3 4 9 : 1 3 4 10 : 1 3 5 6 :

人教版三年级语文下册第一次月考综合试题及答案

人教版三年级语文下册第一次月考综合试题及答案班级:姓名:满分:100分考试时间:90分钟 题序一二三四五六七总分 得分 一、读拼音,写词语。(20分) hán lěnɡlíkāi yídìnɡyuán yěfāshēnɡ shènɡxiàshùɡēn fǔzi shān ɡǔhuǒ chái cūn zi ɡào su dēnɡ huǒjiēzhe děnɡhòu 二、比一比,再组词。(10分) 蚁(_______)粮(_______)秀(_______)消(_______) 议(_______)良(_______)诱(_______)稍(_______) 三、读一读,连一连。(10分) 橙红色的衣裳香甜的夏天 黄黄的果树欢乐的秋天 红红的叶子炎热的气味 油亮亮的枫叶凉爽的歌声

四、想一想,选词填空。(10分) 继续陆续 1.这些花在二十四小时内(__________)开放。 2.休息片刻后,爸爸(__________)投入到紧张的工作中。 坚固坚硬 3.赵州桥不但(__________),而且美观。 4.司马光抱起一块(__________)的大石头,把缸砸碎了。 五、照样子,按要求写句子。(15分) 照样子,写词语。 滴滴答答_____________ _____________ 2.把下列词语整理成一句通顺的话并加上标点符号。 大合唱从轻快的一首唱到波澜壮阔的山中小曲海洋 ___________________________________ 3.读一读,照样子写句子。 他跑得像.兔子一样快。 ______________________________________ 4.读下面的句子,注意加点的词语,仿写一个句子。 小溪淙淙地流向河流 ..哗啦啦地汹涌澎湃。 ..,大海 ..,河流 ..潺潺地流向大海 ___________________________________ 5.补充句子。 ①___________,芙蓉向脸两边开。 ②课文中写到“水,也是大自然的音乐家”。例如:“下雨的时候,他喜欢玩_________。_________,一场_____便开始了。______……_____……所有的树林,树林里的_______;所有的房子,房子的______,都发出______。” 六、阅读短文,回答问题。(20分) 在牛肚子里旅行(节选)

第一章 总论 练习题

第一章 1.指出下面的变量哪一个属于分类变量() A. 年龄 B. 工资 C. 汽车产量 D. 购买商品时的支付方式(现金、信用卡、支票) 2. 指出下面的变量哪一个属于顺序变量() A. 年龄 B. 工资 C. 汽车产量 D. 员工对企业某项改革措施的态度(赞成、中立、反对) 3. 指出下面的变量哪一个属于数值型变量() A. 年龄 B. 工资 C. 企业类型 D. 购买商品时的支付方式(现金、信用卡、支票) 4. 某研究部门准备在全市200万个家庭中抽取2000个家庭,推断该城市所有职工家庭的年人均收入。这项研究的总体是() A. 2000个家庭 B. 200万个家庭 C. 2000个家庭的人均收入 D. 200万个家庭的总收入 5.某研究部门准备在全市200万个家庭中抽取2000个家庭,推断该城市所有职工家庭的年人均收入。这项研究的样本是() A. 2000个家庭 B. 200万个家庭 C. 2000个家庭的人均收入 D. 200万个家庭的总收入 6. 某研究部门准备在全市200万个家庭中抽取2000个家庭,推断该城市所有职工家庭的年人均收入。这项研究的参数是() A. 2000个家庭 B. 200万个家庭 C. 2000个家庭的人均收入 D. 200万个家庭的总收入 7. 某研究部门准备在全市200万个家庭中抽取2000个家庭,推断该城市所有职工家庭的年人均收入。这项研究的统计量是() A. 2000个家庭 B. 200万个家庭 C. 2000个家庭的人均收入 D. 200万个家庭的总收入 8. 一家研究机构从IT从业者中随机抽取500人作为样本进行调查,其中60%回答他们的月收入在5000元以上,50%回答他们的消费支付方式是用信用卡。这里的总体是() A. IT业的全部从业者 B. 5000个IT业从业者 C. IT业从业者的总收入 D.IT业从业者的消费支付方式 9. 一家研究机构从IT从业者中随机抽取500人作为样本进行调查,其中60%回答他们的月收入在5000元以上,50%回答他们的消费支付方式是用信用卡。这里“月收入”是()A.分类变量 B.顺序变量 C. 数值型变量 D.离散型变量 10. 一名统计学专业的学生为了完成其统计作业,在《统计年鉴》中找到了2006年城镇家庭的人均收入数据。质疑数据属于() A.分类数据 B.顺序数据 C. 数值型数据 D.离散型数据

相关文档
相关文档 最新文档