当前位置：文档库 › 5082-7404-C0Z00中文资料

5082-7404-C0Z00中文资料

7.6 mm (0.3 inch) Micro Bright Seven Segment Displays Technical Data

Features

? Available with Colon for Clock Display ? Compact Package 0.300 x 0.500 inches

Leads on 2.54 mm (0.1 inch)Centers

? Choice of Colors AlGaAs Red, High

Efficiency Red, Yellow, Green,Orange

? Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Surface Color Gives Optimum Contrast

±50° Viewing Angle ? Design Flexibility

Common Anode or Common Cathode

Right Hand Decimal Point ±1. Overflow Character ? Categorized for Luminous Intensity

Yellow and Green Categorized for Color

Use of Like Categories Yields a Uniform Display ? High Light Output ? High Peak Current

? Excellent for Long Digit String Multiplexing ? Intensity and Color Selection Available See Intensity and Color

Selected Displays Data Sheet ? Sunlight Viewable AlGaAs

Description

The 7.6 mm (0.3 inch) LED seven segment displays are designed for viewing distances up to 3 metres (10 feet). These devices use an industry standard size package and pinout. Both the numeric and

Devices

Orange AlGaAs [1]HER [1]Yellow [1]Green [1]Package HDSP-HDSP-HDSP-HDSP-HDSP- Description

Drawing

A401

A151

750174017801Common Anode Right A Hand Decimal

7502

74027802Common Anode Right Hand B Decimal, Colon A403

A153

750374037803Common Cathode Right C Hand Decimal

7504

74047804Common Cathode Right Hand D Decimal, Colon

A157750774077807Common Anode ±1. Overflow E A158

7508

7408

7808

Common Cathode ±1. Overflow

Note:

1. These displays are recommended for high ambient light operation. Please refer to the HDSP-A10X AlGaAs, HDSP-335X HER, HDSP-A80X Yellow, and HDSP-A90X Green data sheet for low current operation.

HDSP-740x Series HDSP-750x Series HDSP-780x Series HDSP-A15x Series HDSP-A40x Series

±1. overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode.These displays are ideal for most applications. Pin for pin equiv-alent displays are also available in a low current design. The low current displays are ideal for

portable applications. For additional information see the Low Current Seven Segment Displays.

Part Numbering System

Notes:

1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details.

2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.

5082 -X X X X-X X X X X HDSP-X X X X-X X X X X

Mechanical Options [1]00: No Mechanical Option

Color Bin Options [1,2]0: No Color Bin Limitation

3: Color Bins 3- and 3+ only (applicable for Yellow devices only)Z: Color Bins 2- and 3+ only (applicable for Yellow devices only)Maximum Intensity Bin [1,2]

0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2]

0: No Minimum Intensity Bin Limitation Device Configuration/Color [1]1: Common Anode 2: Common Anode 3: Common Cathode 4: Common Cathode

Device Specific Configuration [1]Refer to Respective Datasheet

Package [1]

A: 7.6 mm (0.3 inch) Single Digit Seven Segment Display

Package Dimensions NOTES:

1. ALL DIMENSIONS IN MILLIMETRES (INCHES).

2. MAXIMUM.

3. ALL UNTOLERANCED DIMENSIONS ARE

FOR REFERENCE ONLY.

4. REDUNDANT ANODES.

5. REDUNDANT CATHODES.

6. FOR HDSP-7400/-7800 SERIES PRODUCT ONLY.

Device Series HDSP-Parameter

Symbol Min.Typ.Max.

Units Test Conditions Luminous Intensity/Segment [1,2,5]I V

6.9

14.0mcd I F = 20 mA (Digit Average)

1.8

I F = 20 mA

Forward Voltage/Segment or DP

V F

2.0

3.0

V I F = 100 mA

A15x

Peak Wavelength λPEAK 645nm Dominant Wavelength [3]

λd 637nm Reverse Voltage/Segment or DP [4]V R 3.0

15.0V I R = 100 μA Temperature Coefficient of ?V F /°C -2mV/°C V F /Segment or DP

Thermal Resistance LED Junction-R θJ-PIN

255

°C/W/Seg

to-Pin

AlGaAs Red

Electrical/Optical Characteristics at T A = 25°C Absolute Maximum Ratings

AlGaAs Red HER/Orange Yellow Green

HDSP-A150HDSP-7500/-A40X HDSP-7400

HDSP-7800Description

Series

Series Series

Series

Units Average Power per Segment or DP 9610580105mW Peak Forward Current per 160[1]90[3]60[5]90[7]mA Segment or DP

DC Forward Current per 40[2]

30[4]20[6]

30[8]

Segment or DP

Operating Temperature Range –20 to +100[9]

–40 to +100

°C

Storage Temperature Range –55 to +100

°C Reverse Voltage per Segment or DP 3.0V Lead Solder Temperature for 3Seconds (1.59 mm [0.063 in.] 260

°C

below seating plane)

Notes:

1. See Figure 1 to establish pulsed conditions.

2. Derate above 46°C at 0.54 mA/°C.

3. See Figure 6 to establish pulsed conditions.

4. Derate above 53°C at 0.45 mA/°C.

5. See Figure 7 to establish pulsed conditions.

6. Derate above 81°C at 0.52 mA/°C.

7. See Figure 8 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.

9. For operation below –20°C, contact your local Agilent components sales office or an authorized distributor.

High Efficiency Red

Device

Series

HDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,6]360980I F = 5 mA

(Digit Average)I Vμcd

5390I F = 20 mA Forward Voltage/Segment or DP V F 2.0 2.5V I F = 20 mA 750x Peak WavelengthλPEAK635nm

Dominant Wavelength[3]λd626nm

Reverse Voltage/Segment or DP[4]V R 3.030V I R = 100 μA

Temperature Coefficient of?V F/°C-2mV/°C

V F/Segment or DP

Thermal Resistance LED Junction-RθJ-PIN200°C/W/Seg

to-Pin

Orange

Device

Series

HDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,6]I V0.70mcd I F = 5 mA

(Digit Average)

Forward Voltage/Segment or DP V F 2.0 2.5V I F = 20 mA A40x Peak WavelengthλPEAK600nm

Dominant Wavelength[3]λd603nm

Reverse Voltage/Segment or DP[4]V R 3.030V I R = 100 μA

Temperature Coefficient of?V F/°C-2mV/°C

V F/Segment or DP

Thermal Resistance LED Junction-RθJ-PIN200°C/W/Seg

to-Pin

Yellow

Device

Series

HDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,7]225480I F = 5 mA

(Digit Average)I Vμcd

2740I F = 20 mA Forward Voltage/Segment or DP V F 2.2 2.5V I F = 20 mA 740x Peak WavelengthλPEAK583nm

Dominant Wavelength[3,9]λd581.5586592.5nm

Reverse Voltage/Segment or DP[4]V R 3.050.0V I R = 100 μA

Temperature Coefficient of?V F/°C-2mV/°C

V F/Segment or DP

Thermal Resistance LED Junction-RθJ-PIN200°C/W/Seg

to-Pin

High Performance Green

Device

Series

HDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,8]8603000I F = 10 mA

(Digit Average)I Vμcd

6800I F = 20 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mA 780x Peak WavelengthλPEAK566nm

Dominant Wavelength[3,9]λd571577nm

Reverse Voltage/Segment or DP[4]V R 3.050.0V I R = 100 μA

Temperature Coefficient of?V F/°C-2mV/°C

V F/Segment or DP

Thermal Resistance LED Junction-RθJ-PIN200°C/W/Seg

to-Pin

Notes:

1. Case temperature of device immediately prior to the intensity measurement is 25°C.

2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.

3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of

the device.

4. Typical specification for reference only. Do not exceed absolute maximum ratings.

5. For low current operation the AlGaAs HDSP-A101 series displays are recommended.

6. For low current operation the HER HDSP-7511 series displays are recommended.

7. For low current operation the Yellow HDSP-A801 series displays are recommended.

8. For low current operation the Green HDSP-A901 series displays are recommended.

9. The yellow (HDSP-7400) and Green (HDSP-7800) displays are categorized for dominant wavelength. The category is designated by a

number adjacent to the luminous intensity category letter.

AlGaAs Red

t – PULSE DURATION – μs P

1100

R A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D M A X I M U M D C C U R R E N T

I P E A K F I M A X D

C Figure 4. Relative Luminous Intensity vs. DC Forward Current.Figure 2. Maximum Allowable DC Current per Segment as a Function of Ambient Temperature.

Figure 1. Maximum Allowed Peak Current vs.

Pulse Duration – AlGaAs Red.

Figure 5. Relative Efficiency (Luminous

Intensity per Unit Current) vs. Peak Current.

Figure 3. Forward Current vs.Forward Voltage.

T A – AMBIENT TEMPERATURE – °C I D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T

– m A

V F – FORWARD CURRENT – V

I F – F O R W A R D C U R R E N T P E R S E G M E N T – m A

I PEAK – PEAK FORWARD CURRENT PER SEGMENT – mA

ηP E A K – N O R M A L I Z E D R E L A T I V E E F F I C I E N C Y

I F – FORWARD CURRENT PER SEGMENT – mA R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20 m A )

Figure 12. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.

ηP E A K – R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 5 m A F O R H E R ,O R A N G E A N D Y E L L O W , A N D 10 m A F O R G R E E N )

I PEAK – PEAK FORWARD CURRENT

PER SEGMENT – mA

HER, Yellow, Green, Orange

Figure 6. Maximum Tolerable Peak Current vs.

Pulse Duration – HER, Orange.Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow.

Figure 10. Forward Current vs.Forward Voltage Characteristics.Figure 11. Relative Luminous

Intensity vs. DC Forward Current.

Figure 8. Allowable Peak Current vs.

Pulse Duration – Green.Figure 9. Maximum Allowable DC Current per Segment as a Function of Ambient Temperature.

R A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D D C C U R R E N T

I P E A K F I M A X D C t – PULSE DURATION – μs P 101100

R A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D D C C U R R E N T

I P E A K F

I M A X D C t – PULSE DURATION – μs P

1100

R A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D D C C U R R E N T

I P E A K F

I M A X D C t – PULSE DURATION – μs P

1100

400

51015202530352010090807060

T – AMBIENT TEMPERATURE – °C A

I M A X –

M A X I M U M D C C U R R E N T P E R S E G M E N T – m A

D C

120

11050

100

I – F O R W A R D C U R R E N T P E R S E G M E N T – m A F

V – FORWARD VOLTAGE – V F R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 5 m A F O R H E R A N D )t (Y E L L O W A N D T O

1 A T 10 m A F O R G R E E N )

1510

20530

1025I – FORWARD CURRENT PER SEGMENT – mA F

HDSP-A15x IV Bin Category Min.

Max.

M 7.0713.00N 10.6019.40O 15.9029.20P 23.9043.80Q 35.80

65.60

Intensity Bin Limits (mcd)AlGaAs Red

HDSP-750x IV Bin Category Min.

Max.

B 0.3420.630

C 0.5160.946

D 0.774 1.418

E 1.160 2.127

F 1.740 3.190

G 2.610 4.785

H 3.915

7.177

HER

HDSP-740x IV Bin Category Min.

Max.

B 0.2290.387

C 0.3170.582

D 0.4760.872

E 0.714 1.311

F 1.073 1.967

G 1.609 2.950

H 2.413

4.425

Yellow

HDSP-780x IV Bin Category Min.

Max.

H 0.86 1.58I 1.29 2.37J 1.94 3.55K 2.90 5.33L 4.37

8.01

Green

Orange

HDSP-A40X

IV Bin Category Min.

Max.

A 0.2840.433

B 0.3540.541

C 0.4430.677

D 0.5540.846

E 0.692 1.057

F 0.856 1.322

G 1.082 1.652

H 1.352 2.066

I 1.692 2.581

J 2.114 3.227

K 2.641 4.034

L 3.300 5.042

M 4.127 6.303

N 5.157

7.878

Color Categories

Note:

All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.

Contrast Enhancement

For information on contrast

enhancement, please see

Application Note 1015.

Soldering/Cleaning

Cleaning agents from the ketone

family (acetone, methyl ethyl

ketone, etc.) and from the

chlorinated hydrocarbon family

(methylene chloride, trichloro-

ethylene, carbon tetrachloride,

etc.) are not recommended for

cleaning LED parts. All of these

various solvents attack or dissolve

the encapsulating epoxies used to

form the package of plastic LED

parts.

For further information on

soldering LEDs, please refer to

Application Note 1027.

https://www.wendangku.net/doc/9a17705532.html,/semiconductors For product information and a complete list of distributors, please go to our web site.

For technical assistance call:

Americas/Canada: +1 (800) 235-0312 or (408) 654-8675

Europe: +49 (0) 6441 92460

China: 10800 650 0017

Hong Kong: (+65) 271 2451

India, Australia, New Zealand: (+65) 271 2394 Japan: (+81 3) 3335-8152(Domestic/Interna-tional), or 0120-61-1280(Domestic Only) Korea: (+65) 271 2194

Malaysia, Singapore: (+65) 271 2054

Taiwan: (+65) 271 2654

Data subject to change.

February 11, 2002

5988-4434EN