icg2000出厂配置
#
version 5.20, Release 2207P02
#
sysname H3C
#
domain default enable system
#
dar p2p signature-file flash:/p2p_default.mtd
#
port-security enable
#
vlan 1
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
user-group system
group-attribute allow-guest
#
local-user admin
password cipher .]@USE=B,53Q=^Q`MAF4<1!!
authorization-attribute level 3
service-type telnet
#
wlan rrm
dot11b mandatory-rate 1 2
dot11b supported-rate 5.5 11
dot11g mandatory-rate 1 2 5.5 11
dot11g supported-rate 6 9 12 18 24 36 48 54
#
cwmp
undo cwmp enable
#
interface Aux0
async mode flow
link-protocol ppp
#
interface Cellular0/0
async mode protocol
link-protocol ppp
#
interface Ethernet0/0
port link-mode route
#
interface NULL0
#
interface Vlan-interface1
ip address 192.168.1.1 255.255.255.0
#
interface Ethernet0/1
port link-mode bridge
#
interface Ethernet0/2
port link-mode bridge
#
interface Ethernet0/3
port link-mode bridge
#
interface Ethernet0/4
port link-mode bridge
#
interface WLAN-Radio2/0
#
#
voice-setup
#
sip
#
sip-server
#
call-rule-set
#
call-route
#
dial-program
default entity fax protocol standard-t38
default entity fax protocol standard-t38 hb-redundancy 0
default entity fax protocol standard-t38 lb-redundancy 0
#
aaa-client
#
gk-client
#
load xml-configuration
#
load tr069-configuration
#
user-interface tty 12
user-interface aux 0
user-interface vty 0 4
authentication-mode scheme
#
return