Interface称重传感器1200Spdf

Model 1200 Standard Load Cell

(U.S. & Metric)

Why the Interface model 1200 Standard Load Cell is the best in class:

?Proprietary Interface temperature compensated strain gages ?Performance to .04%?High output – to 4 mV/V

?Eccentric Load compensated

?.0008%/°F (.0015%/°C) temp. effect on output ?Low deflection ? Shunt calibration ? Barometric compensation ? Tension and compression ?Compact size

DIMENSIONS

Shown with optional base

Base (Recommended)

Compression Overload Protection Integral 10 ft Cable Bayonet Connector OPTIONS

10 ft Integral Cable (12xxAJ-nn)

PC04E-10-6P Standard Connector (12xxAF-nn) PT02E-10-6P Bayonet Connector (12xxACK-nn)Installed Base (-B suffix)

STANDARD CONFIGURATIONS

SPECIFICATIONS

MODEL

1210121012201232CAPACITY U.S. Models (lbf) 300,500,1K,2K 5K, 10K 25K, 50K 100K Metric Models (kN)

1.5,

2.5, 5, 1025, 50100, 250450ACCURACY – (MAX ERROR)Static Error Band–% FS ±0.04±0.05±0.05±0.06Nonlinearity–% FS ±0.04±0.05±0.05±0.05Hysteresis–% FS

±0.03±0.05±0.06±0.06Nonrepeatability–% RO ±0.01±0.01±0.01±0.01Creep, in 20 min–%±0.025±0.025±0.025±0.025Side Load Sensitivity–%

±0.25±0.25±0.25±0.25Eccentric Load Sensitivity–%/in ±0.25±0.25±0.25±0.25TEMPERATURE

Compensated Range–?F 15 to 11515 to 11515 to 11515 to 115Compensated Range–?C -10 to 45-10 to 45-10 to 45-10 to 45Operating Range–?F -65 to 200-65 to 200-65 to 200-65 to 200Operating Range–?C

-55 to 90-55 to 90-55 to 90-55 to 90Effect on Zero–%RO/?F – MAX ±0.0008±0.0008±0.0008±0.0008Effect on Zero–%RO/?C – MAX ±0.0015±0.0015±0.0015±0.0015Effect on Output–%/?F – MAX ±0.0008±0.0008±0.0008±0.0008Effect on Output–%/?C – MAX ±0.0015±0.0015±0.0015±0.0015ELECTRICAL

Rated Output–mV/V (Nominal) 2.0 4.0 4.0 4.0Excitation Voltage–VDC – MAX 20202020Bridge Resistance–Ohm (Nominal)350350 350350Zero Balance–% RO

±1.0±1.0±1.0±1.0Insulation Resistance–Megohm 5000500050005000MECHANICAL

Safe Overload–% CAP ±150±150±150±150Deflection @ RO–inch 0.0010.0020.0020.003Deflection @ RO–mm 0.030.050.050.08Optional Base–P/N (Metric)B101 (M)B102 (M)B103 (M)B112 (M)Natural Frequency–kHz 3.9, 5.0, 6.6, 9.4 6.5, 7.0 5.86.9, 9.8Weight–lb 1.5 3.39.526Weight–kg 0.7 1.5 4.311.8Connector PC04E-10-6P PC04E-10-6P PC04E-10-6P PC04E-10-6P Calibration

T & C

T & C

T &C

T &C

PARAMETERS