Pushbutton
C&K NE-18 Series
Mains / Power Switches
Features/Benefits
?Chassis or panel mount ?Various buttons
?Various contact configurations ?RoHS compliant
Typical Applications ?Mains/power switching ?Consumer electronics ?Audio equipment ?Digital products
Specifications
POWER CONTACT:
SWITCHING POWER MAX. AC/DC: NE18: 1500/100 W,
NE18CTII: 1000/100 W; AC (Inductive cos w =0.6): NE18: 900W,NE18CTII: 600W.SWITCHING VOLTAGE MAX. AC/DC: 250/100V
SWITCHING CURRENT MAX. AC/DC
AC (Inductive cos w =0.6): NE18: 6 A 2)4)/1 A, NE18CTII: 4 A 2)/1 A INRUSH CURRENT MAX. AC 1): NE18: 36 A, NE18CTII: 64 A DIELECTRIC STRENGTH (50 Hz, 1 min.): 2000 V
OPERATING LIFE AT MAX. LOAD AND AT MAX. INRUSH
CURRENT: ^104operations 5)
CONTACT RESISTANCE: Initial: 50m ?; After 104operations: 70m ?.INSULATION RESISTANCE: ^1012?chassis – nearest contact;
^1012?mains contact – mains contact; ^1012?mains contact –mains contact after 104operations.LOW VOLTAGE CONTACT:SWITCHING POWER MAX.: 12W SWITCHING VOLTAGE MAX.: 24V
SWITCHING CURRENT MAX.: 0.5A TOTAL TRAVEL: 4.7mm (.185 inch)LATCHING TRAVEL: 3.3mm (.130 inch)
OPERATING FORCE: Without auxiliary low voltage contacts:NE18: 7N (700 grams); NE18CTII: 9.5N (950 grams).With auxiliary low voltage contacts: NE18: 8N (800 grams);NE18CTII: 11N (1100 grams).SEALING: Dust proof.
Materials
HOUSING, ACTUATOR & TERMINAL BOARD: Thermoplastic polyester (UL 94V-0).
MOVABLE CONTACT: Silver nickel alloy, silver plated.FIXED CONTACTS: Silver nickel alloy, silver plated.
COMMON CONTACTS & TERMINALS: Copper alloy, silver plated.RETURN SPRING: Music wire.
NOTE:For the latest information regarding RoHS compliance, please go to:https://www.wendangku.net/doc/a29661573.html,/rohs. All models arer RoHS compliant and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-100 thru A-106. For additional options not shown in catalog, consult Customer Service Center.If requesting only a switch, select the switch as noted below. Buttons are sold separately.
Designation NE18NE1B
ZNE18
Cental mounted NE1B
Single Station Chassis 01With .094 mounting holes (NONE)No chassis
02With 4-40 tapped mounting holes 03Special chassis (consult factory)
Dress nut*
*Central mounted
ZNE18 series only (NONE)No dress nut B Black C Chrome
Mechanical Function OA Momentary
EE Alternate (push-push)
Contact Arrangement NE18 code # - see list
C&K NE-18 Series
Mains / Power Switches
Style F01FMR F02FG*F12FSC F13FSD F14FU12F15FSB F16FE F19FA F21F001
Button Color 01Black
02White 03Red
04Light gray
Order Code - Buttons
Solid Buttons
Mechanical Indicator Buttons
Style
F01FA100F02FA101F07FA120F08FA2O1F11FA200*
Shell Color 01Black
Out Position Color 01
Black
In Position Color
02White 06Yellow 07Blue 08Green 12Orange
*Button options for central mounting configurations,use ‘FG’ for central mount with chrome dress nut,use ‘FA200’ for central mount with black dress nut.
BUTTON REMOVAL
A button of a push-push switch should only be
removed in the “OFF” non-latching position.
P u
s h b u t t o
n
NE18 2U
NE1838EE
0.583
C&K NE-18 Series
Mains / Power Switches
NE1848EE
NE1839EE
Pushbutton
P
u s
h b u t t o n
ZNE1838EECF0201
C&K NE-18 Series Mains / Power Switches
Momentary Alternate (push-push)
OA EE
FUNCTION OPTION CODE 37NE18 — 2AX DPST 38NE18 — 2UX DPDT 512U + NE18 — 2AX DPST*52 (4A/64)
NE18CTII — 2AX DPST 392U + NE18 — 2UX DPDT*41NE18 — 2AP DPST 42NE18 — 2UP DPDT 43NE18 — 2AW DPST 44NE18 — 2UW DPDT 45
NE18 — 2ASX
DPST
ELECTRICAL CIRCUIT
STYLE OPTION CODE Contact capacity and availability
46NE18 — 2USX DPDT 47NE18 — 2ASP DPST 48NE18 — 2USP DPDT 49NE18 — 2ASW DPST 50NE18 — 2USW DPDT 53 (4A/64)
2U + NE18CTII — 2AX DPST 542U + NE18 — 2AW DPST 552U + NE18 — 2AP DPST 562U + NE18 — 2UW DPDT 57
2U + NE18 — 2UP
DPDT
ELECTRICAL CIRCUIT
STYLE OPTION CODE Contact capacity and availability
*2U + Denotes auxiliary set of low current contacts DPDT 2A = DPST 2U = DPDT
S = Snap-in mounting X = Solder lug/PC pins W = Solder lugs only P = PC pins only
NOTES
1. Contact plating is silver on all Power Switches.
2. The electrical function is Break Before Make (BBM) on all Power Switches.
3. The terminals will be epoxy sealed.
1) A = make contact, R = break contact, U = changeover contact, m = VDE sign for switches with a contact spacing (air gap) < 3mm (.118 inch) according to VDE 0630/CEE 24.
2) With 2A mains contacts: Mounting only by PC pins is not sufficient.3) BSI only for 2U mains contacts.
VDE, BSI, DEMKO, CSA,SEMKO, SEV , UL, NEMKO
II
> 3mm (.118 inch)
2U
2A 2NE18CTII VDE, MEEI, BSI 3,DEMKO, NEMKO, SEMKO, SEV , CSA, UL I
> 3mm (m)(.118 inch)
2U
2A 22U
NE18
VDE, BSI, DEMKO,NEMKO, SEMKO, SEV ,CSA, UL
II
> 3mm (.118 inch)
2U 2A 2NE18APPROVALS
PROTECTION CLASS
(CEE 24)
CONTACT SPACING
POSSIBLE CONTACT ARRANGEMENT
POWER CONTACTS 1
AUXILIARY CONTACTS
TYPE
Pushbutton
P u s h b u t t o n
C&K NE-18 Series
Mains / Power Switches
03
SPECIAL CHASSIS (CONSULT FACTORY)
02
WITH 4-40 TAPPED MOUNTING HOLES
01
WITH .094 MOUNTING HOLES
(NONE)
NO CHASSIS
C&K NE-18 Series Mains / Power Switches
STYLE
Pushbutton
C&K NE-18 Series Mains / Power Switches
F01
FA100
F21
F001
F02
FA101
01BLACK 02WHITE 03RED 04LT. GRAY BLACK/CHROME 09
(F03,F06 & F07buttons only
COLOR OPTION CODE STYLE
STYLE
Pushbutton
C&K NE-18 Series
Mains / Power Switches
STYLE
P u s h b u t t o n