Nadcap认证调查表
Chemical Processing
Preliminary Questionnaire
For reference use only. Do not send back to PRI unless this is for an Initial Audit Price Quotation from the Scheduling Group or a Scope revision. The following is to assist you in completing the scope of accreditation when scheduling your audit through eAuditNet.
Please return completed questionnaire to 614-635-2815
Street Address: __xiangjiaotang industial zone xuexiang village bantian town, City: shenzhen_ State/Province: __guangdong________ Country: _____china____ Postal Code: ___518129____ Audit Contact Name: ____vinson ye__________________________ Title: _____________
Phone: _135********_______ FAX: __0755-******** E-mail:___vinson8886@https://www.wendangku.net/doc/ab12647709.html,_
1. QUALITY SYSTEM APPROVALS (Suppliers are responsible for determining any special Prime or Customer Quality System requirements) ** Prior to issuance of a Nadcap Special Process Certification a supplier must have a valid Quality System approval. Please forward a copy of this certification to 614-635-2815
NOTE: Nadcap recognizes existing quality systems approvals in the form of AS9100 or AS9003 certifications, or Nadcap AC7004 audits. Where no recognized quality systems approvals exist, Nadcap requires assessment using AC7004 to support the special process accreditation.
What is your highest level of approval?
■AS9100* AS9003* AC7004
*Must be an aerospace approved Registrar (See IAQG website – https://www.wendangku.net/doc/ab12647709.html,/oasis)
What is the name of the company that issued the above approval?
Expiration Date:2012-8-1
2. SATELLITE FACILITY
Is there a Satellite facility (same process) to be audited with this audit? Refer to NIP-7-01 under the View User Documents application in eAuditNet (https://www.wendangku.net/doc/ab12647709.html,) for requirements to be considered as a Satellite.
Yes ■No (If Yes, a separate Preliminary Questionnaire for this facility must be submitted.)
PRI will formally notify supplier of audit price and any application fee through scheduling email and/or invoice.
Chemical Processing
AC7108 – Nadcap Audit Criteria for Chemical Processing
Alloy Plating – AMS 2413
Alloy Plating – AMS 2415
Alloy Plating – AMS 2416
Alloy Plating – AMS 2417
Alloy Plating – AMS-P-81728
Alloy Plating – MIL-P-81728
Alloy Plating – MIL-STD-1500
Alloy Plating – Other
Alpha Case Removal (This addresses the removal process only and not the evaluation process)
Anodizing – AMS 2476
Anodizing – AMS 2478
Anodizing – AMS 2479
Anodizing – AMS 2482
Anodizing – AMS 2487
Anodizing – AMS 2488
Anodizing – AMS 2468
Anodizing – AMS 2469
Anodizing – AMS 2470
Anodizing – AMS 2471
Anodizing – AMS 2472
Anodizing – AMS 2480
■Anodizing – AMS-A-8625
Anodizing – ASTM D 1732
Anodizing – MIL-A-63576
■Anodizing – MIL-A-8625
Anodizing – MIL-M-45202
Anodizing – Other
Brush Plating –AMS 2451
Brush Plating – AMS 2451-1
Brush Plating – AMS 2451-2
Brush Plating – AMS 2451-3
Brush Plating – AMS 2451-4
Brush Plating – AMS 2451-5
Brush Plating – AMS 2451-6
Brush Plating – AMS 2451-7
Brush Plating – AMS 2451-8
Brush Plating – AMS 2451-9
Brush Plating – AMS 2451-10
Brush Plating – AMS 2451-11
Brush Plating – AMS 2451-12
Brush Plating – AMS 2451-13
Brush Plating – AMS 2451-14
Brush Plating – MIL-STD-865
Brush Plating – Other
Cadmium Plating – AMS 2400
Cadmium Plating – AMS 2401
Cadmium Plating – AMS 2419
Cadmium Plating – AMS-QQ-P-416
Cadmium Plating – ASTM A 165
Cadmium Plating – MIL-STD-870
Cadmium Plating – Other
Cadmium Plating – QQ-P-416
Chemical Cleaning – ASTM B600
Chemical Cleaning – Acid Cleaning (If Titanium Acid Cleaning is also carried out then pleas e check “Chemical
Cleaning – Titanium Cleaning –Acid” also)
Chemical Cleaning – Alkaline Cleaning (If Titanium Alkaline Cleaning is also carried out then please check “Chemical Cleaning – Titanium Cleaning –Alkaline” also)
Chemical Cleaning – Cleaning for Adhesive Bonding
Chemical Cleaning – Emulsion Cleaning
Chemical Cleaning - Molten Salt Descaling/Pickling
Chemical Cleaning – Other
Chemical Cleaning – Semi-Aqueous Cleaning
Chemical Cleaning – Solvent Cleaning
Chemical Cleaning – Sponge Blasting
Chemical Cleaning – Super Critical Fluid Cleaning (CO2)
Chemical Cleaning – Titanium Cleaning – Acid (This process also requires “Chemical Cleaning – Titanium Cleaning –Alkaline” to also be checked unless customer specifications permit otherwise)
Chemical Cleaning – Titanium Cleaning – Alkaline
Chemical Cleaning – Ultrasonic
Chemical Cleaning – CO 2 Blasting
Chemical Milling (AC7108/5 MUST ALSO BE SELECTED)
Chromium Plating – AMS 2406
Chromium Plating – AMS 2407
Chromium Plating – AMS 2438
Chromium Plating – AMS 2460
Chromium Plating –AMS-QQ-C-320
Chromium Plating – ASTM B 650
Chromium Plating – MIL-C-11436
Chromium Plating – MIL-C-14538
Chromium Plating – MIL-C-23422
Chromium Plating – MIL-N-55392
Chromium Plating – MIL-DTL-14538
Chromium Plating – MIL-DTL-23422
Chromium Plating – MIL-STD-1501
Chromium Plating – Other
Chromium Plating –QQ-C-320
Cleanliness Verification – (AC7108/6 MUST ALSO BE SELECTED)
Conversion/Phosphate Coatings – AMS 2473
Conversion/Phosphate Coatings – AMS 2474
Conversion/Phosphate Coatings – AMS 2475
Conversion/Phosphate Coatings – AMS 2480
Conversion/Phosphate Coatings – AMS 2481
Conversion/Phosphate Coatings – AMS 2485
Conversion/Phosphate Coatings – AMS 2486
Conversion/Phosphate Coatings – AMS-M-3171
Conversion/Phosphate Coatings – DOD-P-16232
Conversion/Phosphate Coatings – MIL-C-13924
Conversion/Phosphate Coatings – MIL-C-17711
Conversion/Phosphate Coatings – MIL-C-5541
Conversion/Phosphate Coatings – MIL-F-495
Conversion/Phosphate Coatings – MIL-M-3171
Conversion/Phosphate Coatings – MIL-DTL-5541
Conversion/Phosphate Coatings – MIL-DTL-13924
Conversion/Phosphate Coatings – MIL-DTL-16232
Conversion/Phosphate Coatings – Other
Conversion/Phosphate Coatings – TT-C-490
Copper Plating – AMS 2418
Copper Plating – MIL-C-14550
Copper Plating – MIL-P-47226
Copper Plating – Other
Electroless Plating Copper – Other
Electroless Plating Nickel – AMS 2399
Electroless Plating Nickel – AMS 2404
Electroless Plating Nickel – AMS 2405
Electroless Plating Nickel – AMS 2433
Electroless Plating Nickel – AMS-C-26074
Electroless Plating Nickel – MIL-C-26074
Electroless Plating Nickel – MIL-DTL-32119
Electroless Plating Nickel – Other
Electropolishing – Other
Etch (AC7108/2 MUST ALSO BE SELECTED)
Gold Plating – AMS 2422
Gold Plating – AMS 2425
Gold Plating-ASTM B 488
Gold Plating – MIL-G-45204
Gold Plating – Other
Lead Plating – AMS 2414
Lead Plating – MIL-L-13808
Lead Plating – Other
Nickel Plating – AMS 2403
Nickel Plating – AMS 2423
Nickel Plating – AMS 2424
Nickel Plating – AMS-QQ-N-290
Nickel Plating – MIL-P-18317
Nickel Plating – MIL-P-27418
Nickel Plating – MIL-STD-868
Nickel Plating – Other
Nickel Plating – QQ-N-290
Paint/Dry Film (AC7108/1 MUST ALSO BE SELECTED)
Platinum Plating – Other
Rhodium Plating – MIL-R-46085
Rhodium Plating – Other
Silver Plating – AMS 2410
Silver Plating – AMS 2411
Silver Plating – AMS 2412
Silver Plating – AMS 2413
Silver Plating – ASTM B 700
Silver Plating – Other
Silver Plating – QQ-S-365
Stripping – MIL-STD-871
Stripping – Other
Surface Treatment/Passivation – AD 1033
Surface Treatment/Passivation– AMS-2700
Surface Treatment/Passivation– AMS-QQ-P-35
Surface Treatment/Passivation – ASTM A 380
Surface Treatment/Passivation – ASTM A 967
Surface Treatment/Passivation – Other
Surface Treatment/Passivation – QQ-P-35
Tin Plating – AMS 2408
Tin Plating – AMS 2409
Tin Plating – ASTM B 339
Tin Plating – ASTM B 545
Tin Plating – MIL-T-10727
Tin Plating – Other
Zinc Plating – AMS 2402
Zinc Plating – AMS 2420
Zinc Plating – ASTM B 633
Zinc Plating – Other
Zinc Plating – QQ-Z-325
TESTING PERFORMED INTERNALLY IN SUPPORT OF CHEMICAL PROCESSING IN THE SCOPE OF THE AUDIT. (DO NOT CHECK TESTS THAT ARE OUTSOURCED.)
Solution Analysis
B2 Hydrogen Embrittlement Testing
B3 Metallography Testing
B4 Microhardness Testing
B5 Corrosion/Salt Spray Testing
B6 Water Immersion/High Humidity Testing
B7 Heat Resistance Testing
B8 Adhesion/Wear Testing
B9 Taber Wear Testing
B10 Adhesion Tape Testing
B11 Adhesion Scratch and Chisel Testing
B12 Adhesion Bend Testing (Metallic Coatings)
B13 Coating Weight Testing
B14 Conductivity Testing
B15 Resistivity Testing
B16 Thickness Verification of Magnetic, Eddy Current and XRF Machines
B17 Solderability
B18 Adhesion Testing Heat and Quench
B19 Climbing Drum Peel Testing
B20 Porosity
B21 Other Test Method
AC7108/1 – Nadcap Audit Criteria for Painting & Dry Film Coatings
1304705
67B-58856
70A-1810P1
73-1-006
829909
9215676
9220082
9223695
A-A 59124
A- A 59166
AMS 2503
AMS 2505
AMS 2515
AMS 2525
AMS 2526
AMS 3682
AMS M 7866
DOD-P-15328
MIL-C-22750
MIL-C-24712
MIL-C-46168
MIL-C-47068
MIL-C-47118
MIL-C-53039
MIL-C-81751
MIL-C-83285
MIL-C-83286
MIL-C-8514
MIL-C-85285
MIL-C-85614
MIL-DTL-53022
MIL-DTL-53030
MIL-DTL-53039
MIL-F-14072
MIL-F-18264
MIL-F-7179
MIL-L-23398
MIL-L-25504
MIL-L-45983
MIL-L-46009
MIL-L-46010
MIL-L-46147
MIL-L-81329
MIL-L-85645
MIL-L-8937
MIL-M-7866
MIL-P-23377
MIL-P-53022
MIL-P-53030
MIL-P-7962
MIL-P-85582
MIL-PRF-22750
MIL-PRF-23377
MIL-PRF-24712
MIL-PRF-46010
MIL-PRF-46147
MIL-PRF-81329
MIL-PRF-85285
MIL-PRF-85582
MIL-STD-7179
MIL-W-5044
MIS-35333
MIS-41927
NASA HEAQ 50M02442
OS 10626 AMEND 1
OS 9067 TYPE II
OS 9162A (1) TYPE 1
OS 9126A (1) TYPE II, CL 1, 2, 3, 4
PD 42
Dry Film Coatings – Other
Paint – Other
Sol Gel
TT-P-28
WA-PD-365
WS 17657
WS 18962
WS 20290
WS 9004
WS 9425 (2) CL IV, TYPE I, II, IV
AC7108/2 Rev A– Nadcap Audit Criteria for Etch Processes (Blue Etch Anodize, Local (Swab), Macrostructure, Nital, Pre-Penetrant Temper,). Requires AC7108 or AC7114
NOTE: THIS CHECKLIST DOES NOT ADDRESS CHEMICAL MILLING WHICH IS COVERED IN AC 7108/5.
AMS 2642
AMS 2643
AMS 2649
Blue Etch Anodize
Etching – Other
Local (Swab) Etch
MIL-STD-867
Macrostructure Etch
Nital Etch
Pre-Penetrant Etch
Temper Etch
Solution Analysis Performed On Site in Support of Etch Processes.
AC7108/3 Nadcap Audit Criteria for Surface Preparation Prior to Metal Bond
Chromic Acid Anodize
Phosphoric Acid Anodize
Other Metal Bond Anodize
FPL Etch
Non-Immersion Techniques (Sol Gel, other)
Grit Blast
Adhesive Primer Application
AC7108/4 Nadcap Audit Criteria for Independent Testing Laboratories in Support of Chemical Processing Vendors Adhesion / Wear Testing
Bend Testing (Metallic Coatings)
Coating Weight Testing
Conductivity Testing
Corrosion / Salt Spray Testing
Heat Quench Testing
Heat Resistance Testing
Hydrogen Embrittlement Test Specimen Preparation
Hydrogen Embrittlement Testing
Metallography
Microhardness
Resistivity Testing
Scratch and Chisel Testing
Solderability
Solution Analysis
Taber Wear Testing
Tape Testing
Thickness Verification
Water Immersion / Humidity Testing
AC7108/5 Nadcap Audit Criteria for Chemical Milling
Chemical Milling – AMS-C-81769
Chemical Milling – MIL-C-81769
Chemical Milling – Other
AC7108/6 Nadcap Audit Criteria for Cleanliness Verification. Requires AC7108 or AC7114. AC 7108/7 Nadcap Audit Criteria for Vacuum Cadmium Deposition
Type I – As coated
Type II – With supplementary chromate treatment
Type III- With supplementary phosphate treatment