JUNIPER双机热备配置

unset key protection enable
set clock timezone 0
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set alg appleichat enable
unset alg appleichat re-assembly enable
set alg sctp enable
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "netscreen"
set admin password "nM9dBJrVGrCEc3RGssLAgHAtesLken"
set admin auth web timeout 10
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst
set zone "Untrust" block
unset zone "Untrust" tcp-rst
set zone "MGT" block
unset zone "V1-Trust" tcp-rst
unset zone "V1-Untrust" tcp-rst
set zone "DMZ" tcp-rst
unset zone "V1-DMZ" tcp-rst
unset zone "VLAN" tcp-rst
set zone "Trust" screen icmp-flood
set zone "Trust" screen udp-flood
set zone "Trust" screen winnuke
set zone "Trust" screen port-scan
set zone "Trust" screen ip-sweep
set zone "Trust" screen tear-drop
set zone "Trust" screen syn-flood
set zone "Trust" screen ip-spoofing
set zone "Trust" screen ping-death
set zone "Trust" screen land
set zone "Trust" screen icmp-fragment
set zone "Trust" screen icmp-large
set zone "Trust" screen syn-ack-ack-proxy
set zone "Trust" screen icmp-id
set zone "Trust" screen tcp-sweep
set zone "Trust" screen udp-sweep
set zone "Untrust" screen icmp-flood
set zone "Untrust" screen udp-flood
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface id 80 "redundant1" zone "Untrust"
set interface "ethernet0/0" zone "MGT"
set interface "ethernet0/1" zone "Trust"
set interface "ethernet0/2" zone "Trust"
set interface "ethernet0/8" zone "HA"
set interface "ethernet

0/9" zone "HA"
set interface ethernet0/3 group redundant1
set interface ethernet0/0 ip 192.168.1.1/24
set interface ethernet0/0 nat
unset interface vlan1 ip
set interface ethernet0/1 ip 10.31.0.9/29
set interface ethernet0/1 nat
set interface ethernet0/2 ip 10.31.0.25/29
set interface ethernet0/2 nat
set interface redundant1 ip 10.31.0.4/29
set interface redundant1 route
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface redundant1 manage-ip 10.31.0.5
set interface ethernet0/1 ip manageable
set interface ethernet0/2 ip manageable
set interface redundant1 ip manageable
unset interface ethernet0/1 manage ssh
unset interface ethernet0/1 manage telnet
u
nset interface ethernet0/1 manage snmp
unset interface ethernet0/1 manage ssl
unset interface ethernet0/1 manage web
unset interface ethernet0/2 manage ssh
unset interface ethernet0/2 manage telnet
unset interface ethernet0/2 manage snmp
unset interface ethernet0/2 manage ssl
unset interface ethernet0/2 manage web
set interface ethernet0/3 manage ping
set interface redundant1 manage ping
unset flow no-tcp-seq-check
set flow tcp-syn-check
unset flow tcp-syn-bit-check
set flow reverse-route clear-text prefer
set flow reverse-route tunnel always
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set nsrp cluster id 1
set nsrp cluster name tyhyqh
set nsrp rto-mirror sync
set nsrp rto-mirror route
set nsrp vsd-group id 0 priority 100
set nsrp monitor interface ethernet0/1
set nsrp monitor interface ethernet0/2
set nsrp monitor interface ethernet0/3
set crypto-policy
exit
set ike respond-bad-spi 1
set ike ikev2 ike-sa-soft-lifetime 60
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit
set url protocol websense
exit
set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit log
set policy id 1
exit
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set config lock timeout 5
unset license-key auto-update
set telnet client enable
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset add-default-route
set route 0.0.0.0/0 interface redundant1 gateway 10.31.0.1
set route 10.31.1.0/24 interface ethernet0/1 gateway 10.31.0.13
set route 10.31.2.0/24 interface ethernet0/2 gateway 10.31.0.26
set route 10.31.1.0/24 interface ethernet0/2 gateway 10.31.0.26

metric 10
set route 10.31.2.0/24 interface ethernet0/1 gateway 10.31.0.13 metric 10
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit