Products category
Products List.xls
According to the list, our products are divided into the following several kinds:
1.3-layer 3-strip Engineered Wood Flooring
2.3-layer 1 strip Engineered Wood Flooring
3.Multi-layer Engineered Wood Flooring
4.2-layer Engineered Wood Flooring
In addition, handscraped classical distresses wood floorings are available.
In conclusion,
●3-layer 1 strip Engineered Wood Floorings have only two kinds of
thickness,namely 14mm&15mm.
Top layer:3mmOR4mm, Core layer:9mm, bottom layer:2mm.
The length range from 300mm to 2200mm,and 1860mm,910mm,1200mm are commen.
90mm,120mm,122mm,127mm,140mm,150mm,190mm are commen kinds of width.
Doussie, Iroko, Canadian maple, American Walnut, American Cherry, Oak, Merbau, Jatoba, and Teak are available species.
●3-layer 3 strips engineered wood flooring
Only one kind of size available in Nanyang Wood Co., LTD, namely 2200*189*14/3 or 15/4mm.
Oak is mainly used. American walnut,Iroko, Doussie, Canadian maple, American cherry are also available.
●Multi-layer wood flooring
Any species available
Length: 910mm, 1200mm, 1860mm
Width: 90mm~190mm
Thickness: 10mm,12mm,14mm,15mm,19mm,21mm.
Top layer: 2mm,3mm,4mm,6mm is ok
●2-layer wood flooring
Size: 490mm*70mm*10mm/4mm or3mm
600mm*70mm*10mm/4mm or3mm
900mm*90mm*10mm/4mm or3mm
Common species:Oak,Iroko,Doussie,Teak.
Production Process Brief Introduction
Kiln-dry→Balance room→S elect→Agglutination/gluing→B alance→Cutting→Sandin g→Tongue&Groove→Paint ing→Pack aging
CQP:
Regarding moisture content.
●International leading intelligent timber drying equipment.
●The big timber conditioning room eliminates the inherent problem of shrinkage
and distortion.
●Controlling to Moisture content is in the whole production process.
1.Timber moisture content after drying—8%~12%.
More than 14%→waxing Less than 9%→get damp?
2.3-layer engineered wood flooring in balance room
Top layer (8~9%) Core layer (7~8%) Base layer (4~5%)
3.Before agglutination,
the MC of veneer should be controlled in the 7%~9% range
the MC of base material should be content in the 8%~10% r ange.
Regarding Agglutination/gluing
●Skillful agglutination technique,1,600metric ton heavy-duty pressing facility and
environmental glue used.
1.Cold pressing duration—50~60min
Hot pressing— prepressing duration 30min,then pressing under high temperature duration 6min.
https://www.wendangku.net/doc/ba3435794.html,mon glue –Casco ,that is Akzo Nobel from Holland
Regarding sanding
Bend up no more than 0.5%
Bend down no more than 1.0%
Regarding T&G
●Advanced production line(HOMAG&WEINIG)from Germany and Taiwan.
●Advanced skill in making Tongue & Groove and square edge, the plane variation
of installed flooring within 0.05mm.
Regarding Paint
●Imported brand name durable and scratch-proof paint—TREFFERT
●Intelligent flooring coating shower line
●Perfect coating process with 6 bottom layers, 2 surface layers with aluminum
oxide additional.
●Surface treatment—brushed,hand-scraped, carbonize, smoked, stained Regarding product classification
程文俊Vince 10:11:06
三拼的长度为2200mm
宽度为189mm
Upwind. 10:12:01
收到
程文俊Vince 10:12:27
3层与多层独副没有问题
程文俊Vince 10:14:56
多层基材:y一般都是桉木杨木杂
2层基材:一般都是桦木与桉木杂
2层的一般讲都是直角,厚度在10mm
基材是6mm,3层桦木,2层桉木
程文俊Vince 10:37:22
你打开看下
10:37:53
成功接收文件
“The Product description of Nanyang Wood Co.,LTD.doc”(45.00KB)打开文件打开所在文件夹
10:38:43
成功接收文件“多层独幅.doc”(38.00KB)
打开文件打开所在文件夹
程文俊Vince 10:38:33
这个是一般b2b上面的可以用的描述
总的写的不错的
Upwind. 10:39:35
谢谢
程文俊Vince 10:39:27
这样你基本上可以先跟发发邮件看看了
Upwind. 10:39:50
嗯
程文俊Vince 10:39:59
含水率
9%get damp 这个是不是属于实木范畴?
程文俊Vince 10:41:08
这个我觉得也有点疑问
压机的压力再确认下
程文俊Vince 10:42:11
1600 metric 还是没有
Upwind. 10:42:41
好的
程文俊Vince 10:42:36
T&G那个,精度达不到那么高
直角板一般在0.1mm一下
程文俊Vince 10:44:47
大概的技术知识知道就好,然后就是一些细的东西后面再摸索下
你同宿舍的有个车间的检验表
你可以看下
上面写的也都行。
Upwind. 10:46:19
嗯应该是最新标准
程文俊Vince 10:47:46
还有资料上面写的不完全正确
之前你也知道了
根据实际情况来回答
Upwind. 10:48:53
还是要常去车间的
实事求是
程文俊Vince 10:48:58
恩,然后把产品的图片慢慢准备些
程文俊Vince 10:51:26
我这边先发一些给你看下
Upwind. 10:51:50
嗯 3Q
10:58:40
成功接收文件夹“Teak”(169.60MB)
打开文件夹
11:01:35
成功接收文件夹“Doussie”(74.98MB)
打开文件夹
11:03:23
成功接收文件夹“Iroko”(56.88MB)
打开文件夹
11:08:24
成功接收文件夹“American Walnut”(125.10MB)打开文件夹
11:09:29
成功接收文件夹“Merbau”(9.38MB)
打开文件夹
11:09:44
成功接收文件夹“Sapeli”(5.62MB)打开文件夹
11:14:11
成功接收文件夹“Wenge”(64.68MB)打开文件夹