VHT SERIES
10NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D https://www.wendangku.net/doc/b86509940.html,
SUBMINIATURE
(Radial Lead, 105°C Max)
The NTE VHT series of aluminum electrolytic capacitors are designed for use in automotive, commercial, and in-dustrial applications. These high temperature, radial lead capacitors are especially suitable for applications that re-quire extended life and higher temperature operation.
RATINGS
Capacitance Range: 0.1μf to 4700μf Tolerance: ±20%
Voltage Range: 16 to 250 Volts
PERFORMANCE SPECIFICATIONS
Operating Temperature Range:
–40°C to +105°C (–40°F to +220.9°F)Leakage Current:
6.3V to 100V:
≤ 0.01CV (+3μA)
160V to 250V:≤0.03CV (+15μA)Capacitance Tolerance: ±20% (M)
measured at +20°C (+68°F), 120H Z High Temperature Load Test:
1000 Hrs @ +105°C (+220.9°F) and rated voltage Ripple Current:
The ripple current multipliers (See Table) adjust the current to make the capacitors operating tem-perature the same for different ambient tempera-tures and ripple frequencies.
Load Life: 1000 Hrs @ +105°C (+220.9°F),
no voltage applied Shelf Life: 1000 Hrs @ +105°C (+220.9°F),
no voltage applied
MECHANICAL SPECIFICATIONS
Lead Solderability:
Meets the requirements of MIL–STD 202,Method 208Marking:
Consists of series type, nominal capacitance,rated voltage, temperature range, anode and/or cathode identification, vendor identification.Recommended Cleaning Solvents:
Methanol, isopropanol ethanol, isobutanol, petro-leum ether, propanol and/or commercial deter-gents. Halogenated hydrocarbon cleaning agents such as Freon (MF
, TF , or TC), trichloroe-thylene, trichloroethane, or methylchloride are not recommended as they may damage the ca-pacitor.
CASE SIZE AND DIMENSIONS:
D’ ? = D ? + 0.5 Max L’ = L + 1.0 Max at D ? ≤ 8.0L’ = L + 2.0 Max at D ? ≥ 10.0
ORDERING INFORMATION
VHT
10
M
25
Series Capacitance Tolerance Voltage
VHT SERIES
11
NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D https://www.wendangku.net/doc/b86509940.html, VHT Series Dimensions: Diameter (D ?) x Length (L): mm
VHT Mechanical Specs: Dimensions (mm)
*These dimensions are for reference only, please consult the factory for actual size.