当前位置：文档库 › 60xx-datasheet

60xx-datasheet

Data Brief

For further information contact your local STMicroelectronics sales office.

January 2009 Rev 11/7

STDP6026, STDP6028, STDP6038

Triple input LCD controller for WSXGA+ and WUXGA applications

Features

■Programmable zoom and shrink scaling ■DisplayPort 1.1a compliant receiver - 4-lane DisplayPort input

■

Ultra-Reliable DVI? receiver (165 MHz) - HDMI 1.3 compliant receiver backward compatible with DVI

■Triple-channel (10-bit) ADC (205 MHz) and PLL

■

Faroudja RealColor? color processing:–Image enhancement –True 10-bit processing –Deep color support

–xvYCC color space support ■Dual channel 8-bit LVDS output

■HDMI 1.3 RX integrated with I2S (L/R channel) or SPDIF audio output ports

■

Intel x86-compatible microcontroller with external SPI ROM interface

■12-bit panel gamma correction and high-quality dithering for 8-bit and 6-bit panel interface ■DDC controller for host interface purposes ■Embedded virtual EDID

■PWM signals for backlight, audio volume control, etc.

■Energy Spectrum Management? (ESM?)■

Package: 128-pin PQFP

Applications

■

Low cost WSXGA+/WUXGA LCD monitors with VGA, DP/HDMI 1.3/DVI inputs

Audio DAC / Amp

Speakers

LCD Panel

https://www.wendangku.net/doc/b36876366.html,

Description STDP6026, STDP6028, STDP6038 1 Description

STDP60xx is an all-in-one LCD monitor controller with analog (RGB), DVI, DisplayPort 1.1a

inputs and supporting resolutions up to WUXGA in a 128 PQFP package. The STDP60xx

leverages Genesis Microchip's patented advanced image-processing technology, as well as

a proven integrated ADC/PLL and an Ultra-Reliable DVI compliant digital receiver to deliver

a high-quality solution for mainstream dual input monitors. The output section contains a

dual channel 8-bit LVDS transmitter for direct interfacing of commercially available LVDS

LCD panel module. In addition, STDP60xx includes an integrated x86 OCM with SPI

compatible interface, advanced color control features, a multicolor proportional font OSD

engine, and a number of system I/O components. Along with the high quality and reliability,

STDP60xx also provides a very low cost system design by reducing the number of system

components by deploying on a small 2-layer PCB.

1920x1200 VGA

2/7

STDP6026, STDP6028, STDP6038Feature attributes

3/7

2 Feature attributes

●

Advanced color controls –TV style color controls including hue and saturation

–Faroudja RealColor provides six axis color controls, flesh-tone adjustment, gray

guarding and image enhancement

–

Multiple-bin ACC extends the dynamic range of the display ●

Analog RGB input –205 MHz 10-bit ADC Supports analog input up to UXGA @ 75–Composite-sync and Sync-on-Green (SOG) support –

Instant Auto? for automatic phase and clock adjustment ●

Ultra-reliable DVI input –Operating speed 165 MHz (up to UXGA 60 Hz)–Direct connect to all DVI-compliant digital transmitters –High-bandwidth Digital Content Protection (HDCP)

–

Optional HDMI 1.3 compliant RX with I2S (up to 8 channels) or SPDIF audio output ports

●

DisplayPort input –4-lane DisplayPort 1.1a compliant RX –One auxiliary channel

–

I2S (up to 8 channels) or SPDIF audio output ports ●

Intelligent image processing?–Programmable coefficients for user sharpness control

–

Real Recovery? function provides full color recovery image for refresh rates higher than those supported by the LCD panel

●

x86 on-chip microcontroller –High-performance x86 MCU with on-chip RAM and ROM –Unified memory architecture simplifies chip programming

–Three DDC2Bi ports on VGA, HDMI/DVI and DP/HDMI/DVI inputs with DMA buffer to internal RAM. DDC buses can function as GPIO.–

Slow clock mode for 50mW sleep mode power consumption ●

On-chip OSD controller –1, 2 and 4-bit per pixel character cells –Blinking, transparency and blending

–

Supports two independent OSD menu rectangles ●

LVDS transmitters –Double pixel up to UXGA @ 60 output

–Support for 8 or 6-bit LVDS (with high-quality dithering)–

Programmable signal amplitude and driving strength

Feature attributes STDP6026, STDP6028, STDP6038

4/7●Highly integrated system-on-a-chip

–On-chip reset circuit to eliminate external reset IC

–Broader PWM range from 50 Hz ~ 1 kHz with 256 steps adjustable duty cycle –LED direct drive pins

–Programmable dithering block

–Embedded virtual EDID

–Store HDCP key in embedded OTP ROM

STDP6026, STDP6028, STDP6038Ordering information

5/7

3 Ordering information

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK? packages, depending on their level of environmental compliance. ECOPACK? specifications, grade definitions and product status are available at: https://www.wendangku.net/doc/b36876366.html, . ECOPACK? is an ST trademark.

Table 1.

Order codes

Part number

Description

STDP6026-AC 128-pin PQFP STDP6028-AC 128-pin PQFP STDP6038-AC

128-pin PQFP

Revision history STDP6026, STDP6028, STDP6038

6/7

4 Revision history

Table 2.

Document revision history

Date Revision

Changes

5-Jan-2009

Initial release.

STDP6026, STDP6028, STDP6038

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXP RESS OR IMP LIED WARRANTY WITH RESP ECT TO THE USE AND/OR SALE OF ST P RODUCTS INCLUDING WITHOUT LIMITATION IMP LIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXP RESSLY AP P ROVED IN WRITING BY AN AUTHORIZED ST REP RESENTATIVE, ST P RODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

https://www.wendangku.net/doc/b36876366.html,

7/7