AZ2705-1A-3D中文资料

NOTES

1.All values at 20°C (68°F).

2.Relay may pull in with less than “Must Operate” value.

3.Specifications subject to change without notice.

4.Allow suitable slack on leads when wiring, and do not subject the termi-nals to excessive force.

GENERAL DATA

Life Expectancy

Minimum operations Mechanical 1 x 106

Electrical 1 x 105at 30 A 120 VAC Res.Operate Time (max)30 ms at nominal coil voltage Release Time (max)

30 ms at nominal coil voltage (with no coil suppression)

Dielectric Strength 4000 Vrms coil to contact

(at sea level for 1 min.)2000 Vrms between open contacts Insulation 1000 megohms min. at 20°C, 500 VDC,Resistance 50% RH

Dropout

Greater than 5% of nominal coil voltage (DC)Greater than 15% of nominal coil voltage (AC)Ambient Temperature

At nominal coil voltage

Operating -40°C (-40°F) to 85°C (185°F) - Class B Storage

-40°C (-40°F) to 105°C (221°F) - Class F -40°C (-40°F) to 130°C (266°F) - Class B -40°C (-40°F) to 155°C (311°F) - Class F Vibration 0.062" DA at 10–55 Hz

Shock

Operating 10 g, 11 ms,

1/2sine (no false operation)Non-Operating 100 g, 11 ms, 1/2sine (no damage)

Enclosure P.B.T. polyester Terminals

Screw mount Max. Solder Temp.270°C (518°F)Max. Solder Time 5 seconds Weight

120 grams

30 AMP POWER RELAY

FEATURES

?Low cost

?30 Amp switching

?Class B insulation system standard, Class F available ?Flange mount ?4 kV dielectric

?Standard (2.4 mm) and wide contact gap (3.0 mm) available ?UL, CUR file E44211?TüV R50031999

COIL

Power

At Pickup Voltage 1.08 W (DC)(typical)

1.2 VA (AC)

Max. Continuous 3.8 W at 20°C (68°F) ambient Dissipation Temperature Rise 50°C (90°F) at nominal coil voltage Temperature

Max. 130°C (266°F) - Class B Max. 155°C (311°F) - Class F

CONTACTS

Arrangement SPST (1 Form X)DPST (2 Form X)Ratings

Resistive load:

Max. switched power: 840 W or 8310 VA Max. switched current: 30 A

Max. switched voltage: 150* VDC or 400 VAC

*Note: If switching voltage is greater than 30VDC, special

precautions must be taken. Please contact the factory.

Rated Load 30 A at 277 VAC res. 30k cycles [1]UL, CUR

1.5 HP at 120 VAC [1]3 HP at 240 VAC [1]TV-10 at 120 VAC [1]

30 A at 277 VAC res. 70k cycles [2]3 HP at 240 VAC 100k cycles [2]

10 A at 120 VAC tungsten load, 10k cycles [2]TüV

27 A at 240 VAC, cos phi = .8, 100k cycles [1][1] silver cadmium oxide,

[2] silver tin oxide (1 Form X only)

Material Silver cadmium oxide, silver tin oxide Resistance

< 100 milliohms initially

(24 V, 1 A voltage drop method)

COIL SPECIFICATIONS – AC COIL

ORDER NUMBER*

Nominal Coil

Must Operate

Max. Continuous

Coil Current 1 Form X 2 Form X VAC VAC VAC mA ± 10%6 4.8 6.6319AZ2705–1A–6A AZ2705–2A–6A 129.613.2160AZ2705–1A–12A AZ2705–2A–12A 2419.226.480AZ2705–1A–24A AZ2705–2A–24A 4838.452.840AZ2705–1A–48A AZ2705–2A–48A 12096.0132.023AZ2705–1A–120A AZ2705–2A–120A 220176.0242.010AZ2705–1A–220A AZ2705–2A–220A 240

192.0

264.0

9.2

AZ2705–1A–240A

AZ2705–2A–240A

*For silver tin oxide add suffix “T” (UL approved for 1 Form X only). For wide contact gap add “W”. For Class F add suffix “F”.

MECHANICAL DATA

COIL SPECIFICATIONS – DC COIL

ORDER NUMBER*

Nominal Coil

Must Operate

Max. Continuous

Coil Resistance

1 Form X

2 Form X VDC VDC VDC ± 10%

3 2.3 4.2 4.7AZ2705–1A–3D AZ2705–2A–3D 6 4.58.418.8AZ2705–1A–6D AZ2705–2A–6D 129.016.875AZ2705–1A–12D AZ2705–2A–12D 2418.033.7300AZ2705–1A–24D AZ2705–2A–24D 4836.067.51200AZ2705–1A–48D AZ2705–2A–48D 10075.0140.55200AZ2705–1A–100D AZ2705–2A–100D 11082.5154.76300AZ2705–1A–110D AZ2705–2A–110D 200

150.0

282.4

21000

AZ2705–1A–200D

AZ2705–2A–200D