BAS16LT1
Preferred Device
Switching Diode
Features
?Pb?Free Packages are Available
MAXIMUM RATINGS
Rating
Symbol Value Unit Continuous Reverse Voltage V R 75Vdc Peak Forward Current I F 200mAdc Peak Forward Surge Current
I FM(surge)
500
mAdc
Maximum ratings are those values beyond which device damage can occur.Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Characteristic
Symbol Max
Unit
Total Device Dissipation FR?5 Board (Note 1)
T A = 25°C
Derate above 25°C P D
2251.8
mW mW/°C Thermal Resistance,Junction?to?Ambient R q JA 556
°C/W
Total Device Dissipation
Alumina Substrate, (Note 2) T A = 25°C
Derate above 25°C P D
3002.4
mW mW/°C Thermal Resistance,Junction?to?Ambient
R q JA 417°C/W Junction and Storage Temperature
T J , T stg
?55 to +150
°C
1.FR?5 = 1.0 0.75 0.062 in.
2.Alumina = 0.4 0.3 0.024 in. 99.5% alumina.
https://www.wendangku.net/doc/b29571294.html,
Preferred devices are recommended choices for future use and best overall value.
Device Package Shipping ?ORDERING INFORMATION
BAS16LT1SOT?233000/Tape & Reel BAS16LT1G SOT?23(Pb?Free)3000/Tape & Reel ?For information on tape and reel specifications,including part orientation and tape sizes, please refer to our T ape and Reel Packaging Specifications Brochure, BRD8011/D.
31BAS16LT3G
SOT?23(Pb?Free)
10000/Tape & Reel
BAS16LT3SOT?2310000/Tape & Reel
ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
Unit
OFF CHARACTERISTICS Reverse Voltage Leakage Current (V R = 75 Vdc)
(V R = 75 Vdc, T J = 150°C)(V R = 25 Vdc, T J = 150°C)I R
???
1.05030m Adc
Reverse Breakdown Voltage (I BR = 100 m Adc)V (BR)75
?
Vdc Forward Voltage (I F = 1.0 mAdc)(I F = 10 mAdc)(I F = 50 mAdc)(I F = 150 mAdc)V F
????
71585510001250mV Diode Capacitance (V R = 0, f = 1.0 MHz)C D
? 2.0pF Forward Recovery Voltage (I F = 10 mAdc, t r = 20 ns)V FR ? 1.75Vdc Reverse Recovery Time
(I F = I R = 10 mAdc, R L = 50 W )
t rr ? 6.0ns Stored Charge
(I F = 10 mAdc to V R = 5.0 Vdc, R L = 500 W )
Q S
?
45
pC
Notes: 1. A 2.0 k W variable resistor adjusted for a Forward Current (I F ) of 10 mA.2. Input pulse is adjusted so I R(peak) is equal to 10 mA.3. t p ? t rr
Figure 1. Recovery Time Equivalent Test Circuit
100
10
1.0
0.1
V R , REVERSE VOLTAGE (VOLTS)
I F , F O R W A R D C U R R E N T (m A )
Figure 4. Capacitance
PACKAGE DIMENSIONS
ǒmm inches
ǔSCALE 10:1
*For additional information on our Pb?Free strategy and soldering
details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
SOT?23 (TO?236)]CASE 318?08ISSUE AN
STYLE 8:
PIN 1.ANODE
2.NO CONNECTION
3.CATHODE
NOTES:
1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 198
2.
2.CONTROLLING DIMENSION: INCH.
3.MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.
4.318?01 THRU ?07 AND ?09 OBSOLETE, NEW STANDARD 318?08.
VIEW C
DIM A MIN NOM MAX MIN
MILLIMETERS
0.89 1.00 1.110.035INCHES A10.010.060.100.001b 0.370.440.500.015c 0.090.130.180.003D 2.80 2.90 3.040.110E 1.20 1.30 1.400.047e 1.78 1.90 2.040.070L 0.100.200.300.0040.0400.0440.0020.0040.0180.0200.0050.0070.1140.1200.0510.0550.0750.0810.0080.012NOM MAX L1 2.10
2.40 2.64
0.083
0.094
0.104
H E 0.350.540.690.0140.0210.029ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION