Slide
Models Available
Specifications
CONTACT RATING: Q contact material (S1XX, S2XX Models):
6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @
125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA).(S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @250 V AC (UL/CSA). See page J-31 for additional ratings.ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.CONTACT RESISTANCE: Below 10 m ?typ. initial
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.INSULATION RESISTANCE: 109?min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.OPERATING TEMPERATURE: -30oC to +65oC STORAGE TEMPERATURE: -30oC to +85oC
Build-A-Switch
T o order , simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J–28 through J–31. For additional options not shown in catalog, consult Customer Service Center.
Materials
HOUSING: 6/6 nylon (UL94V-2), black.TOP PLATE: 6/6 nylon (UL94V-2), black.
ACTUATOR: 6/6 nylon (UL94V-2), black (standard).
CONTACTS: Q contact material: Copper, silver plated. See page
J-31 for additional contact materials.
TERMINALS: Q contact material: Copper, silver plated. See page
J-31 for additional contact materials.
CONTACT SPRING: Music wire or stainless steel.TERMINAL SEAL: Epoxy.
NOTE:Any models supplied with Q, B or G contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to: https://www.wendangku.net/doc/bf10609634.html,/rohs.NOTE:Specifications and materials listed above are for switches with standard options.For information on specific and custom switches, consult Customer Service Center.
Switch Function S101SPST,6 AMPS S202(DPDT,
6 AMPS S802DPDT,15 AMPS S102SPDT,6AMPS
S112SPDT,mom.,6 AMPS S201DPST,6 AMPS S602DPDT,12 AMPS S701SPST,15 AMPS S702SPDT,15 AMPS
Mounting Style
SS Panel with mounting ears MS PC thru-hole
S2Snap-in panel with blacktop plate TS Panel with mounting ears
Detent
1With detent 2Without detent
Actuator 03.335" high 04.500" high 09.250" high
12Screwdriver slot
(with marking)13Screwdriver slot
(without marking)C2Black cap C3Red cap C5Yellow cap
Contact Material Q Silver B Gold
G Gold over silver
Seal
NONE No seal E Epoxy seal
Housing Markings NONE No markings D ON-OFF L ON M ON-OFF
N Red rectangle on one end Terminations
03Solder lug with hole 02PC Thru-hole 04PC Thru-hole 07Quick connect 08PC Thru-hole WC Wire lead
S l i d e
C2; C3; C5
SNAP-ON CAP
13
SCREWDRIVER SLOT (WITHOUT MARKING)
12
SCREWDRIVER SLOT (WITH MARKING)
09
.250" HIGH
03
.335" HIGH
04
.500" HIGH
NOTE:and MOM. in table indicates momentary action.All models
with all options when ordered with ‘G’ or ‘Q’ contact material.
Contacts make on side actuator thrown.
NOTE:Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heights are available with ‘03, 04 and 09’ actuators, consult Customer Service Center. Models with S2 mounting style, subtract .090 (2, 29). Actuators ‘12’ and ‘13’ are available with DPST and DPDT models only.
White 115-230 markings (std.).Without markings.
Available with S2 mounting style only.
NOTE:Actuator finish: matte.
If no color is specified, black will be supplied. Colored actuator caps may also be ordered separately and user installed, see page J-31.
C2BLACK C3RED C5
YELLOW
C1-CT CAP COLOR OPTION CODE2
Slide
PANEL MOUNTING
PANEL THICKNESS :
.020(0,57)–.200(5,08)S2
SNAP-IN PANEL
SS
PANEL WITH MOUNTING EARS
2
WITHOUT DETENT
1WITH DETENT
MS
PC THRU-HOLE
S202031MS02Q
DPDT
S802C21S207Q
DPDT
Standard with all maintained models: S101, S102, S201, S202, S602, S701, S702, and S802.Standard with all momentary models: S112.
AVAILABLE WITH:Models: S101, S102, S112,S201, S202 and S602
Terminations:All except 08Actuators:03, 04, 09, 12*and 13*.
*12 and 13 actuators not available with S1XX models.
AVAILABLE WITH:
Models: S101, S102, S112,S201, S202
Terminations:02, 04 and 08
Actuators: 03, 04, 09, 12* and 13**12 and 13 actuators available with S201, S202 and S602 models only.PC MOUNTING
For mounting information, see
TERMINATIONS section, page J-30.
AVAILABLE WITH:
Models:S701, S702,and S802
Terminations: 04, 07, 57 and WC Actuators:C2, C3, C5 and 03
S l i d e
PANEL MOUNTING
TS
PANEL WITH MOUNTING EARS
AVAILABLE WITH:
Models:S201, S202, and S602Terminations:All
Actuators:03, 04 and 12.
S202031TS03Q
DPDT
Slide
NOTE:Any models supplied with Q, B or G contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to: https://www.wendangku.net/doc/bf10609634.html,/rohs.
EPOXY
.075 MAX.(1,91)
E
EPOXY SEAL
NONE
NO SEAL
N
RED RECTANGLE ON ONE END
M
ON-OFF
L
ON
D
ON-OFF
NONE
NO MARKINGS
1CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).3
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.
NOTE:Top plate markings are available with ‘S2’ mounting style only. The marking color
on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: marking color is black, standard). The marking color on all top plates with ‘N’ marking option is red, standard.Other marking colors are available, consult Customer Service Center.
Note:Orientation of actuator markings and terminals.
All models
with all options when ordered with ‘G’ or ‘Q’ contact material.
NOTE:‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.