文档库

最新最全的文档下载
当前位置:文档库 > S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

Slide

Models Available

Specifications

CONTACT RATING: Q contact material (S1XX, S2XX Models):

6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @

125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA).(S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @250 V AC (UL/CSA). See page J-31 for additional ratings.ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.CONTACT RESISTANCE: Below 10 m ?typ. initial

@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.INSULATION RESISTANCE: 109?min.

DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.OPERATING TEMPERATURE: -30oC to +65oC STORAGE TEMPERATURE: -30oC to +85oC

Build-A-Switch

T o order , simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J–28 through J–31. For additional options not shown in catalog, consult Customer Service Center.

Materials

HOUSING: 6/6 nylon (UL94V-2), black.TOP PLATE: 6/6 nylon (UL94V-2), black.

ACTUATOR: 6/6 nylon (UL94V-2), black (standard).

CONTACTS: Q contact material: Copper, silver plated. See page

J-31 for additional contact materials.

TERMINALS: Q contact material: Copper, silver plated. See page

J-31 for additional contact materials.

CONTACT SPRING: Music wire or stainless steel.TERMINAL SEAL: Epoxy.

NOTE:Any models supplied with Q, B or G contact material are RoHS compliant.

For the latest information regarding RoHS compliance, please go to: http://www.wendangku.net/doc/b8f2e4b6f121dd36a32d82da.html/rohs.NOTE:Specifications and materials listed above are for switches with standard options.For information on specific and custom switches, consult Customer Service Center.

Switch Function S101SPST,6 AMPS S202(DPDT,

S202032TS03BE中文资料

6 AMPS S802DPDT,15 AMPS S102SPDT,6AMPS

S112SPDT,mom.,6 AMPS S201DPST,6 AMPS S602DPDT,12 AMPS S701SPST,15 AMPS S702SPDT,15 AMPS

Mounting Style

SS Panel with mounting ears MS PC thru-hole

S2Snap-in panel with blacktop plate TS Panel with mounting ears

Detent

1With detent 2Without detent

Actuator 03.335" high 04.500" high 09.250" high

12Screwdriver slot

(with marking)13Screwdriver slot

(without marking)C2Black cap C3Red cap C5Yellow cap

Contact Material Q Silver B Gold

G Gold over silver

Seal

NONE No seal E Epoxy seal

Housing Markings NONE No markings D ON-OFF L ON M ON-OFF

N Red rectangle on one end Terminations

03Solder lug with hole 02PC Thru-hole 04PC Thru-hole 07Quick connect 08PC Thru-hole WC Wire lead

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S l i d e

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

C2; C3; C5

SNAP-ON CAP

13

SCREWDRIVER SLOT (WITHOUT MARKING)

12

SCREWDRIVER SLOT (WITH MARKING)

09

.250" HIGH

03

.335" HIGH

04

.500" HIGH

NOTE:and MOM. in table indicates momentary action.All models

with all options when ordered with ‘G’ or ‘Q’ contact material.

Contacts make on side actuator thrown.

NOTE:Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heights are available with ‘03, 04 and 09’ actuators, consult Customer Service Center. Models with S2 mounting style, subtract .090 (2, 29). Actuators ‘12’ and ‘13’ are available with DPST and DPDT models only.

White 115-230 markings (std.).Without markings.

S202032TS03BE中文资料

Available with S2 mounting style only.

NOTE:Actuator finish: matte.

If no color is specified, black will be supplied. Colored actuator caps may also be ordered separately and user installed, see page J-31.

C2BLACK C3RED C5

YELLOW

C1-CT CAP COLOR OPTION CODE2

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

Slide

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

PANEL MOUNTING

PANEL THICKNESS :

S202032TS03BE中文资料

.020(0,57)–.200(5,08)S2

SNAP-IN PANEL

SS

PANEL WITH MOUNTING EARS

2

WITHOUT DETENT

1WITH DETENT

MS

PC THRU-HOLE

S202031MS02Q

DPDT

S802C21S207Q

DPDT

Standard with all maintained models: S101, S102, S201, S202, S602, S701, S702, and S802.Standard with all momentary models: S112.

AVAILABLE WITH:Models: S101, S102, S112,S201, S202 and S602

Terminations:All except 08Actuators:03, 04, 09, 12*and 13*.

*12 and 13 actuators not available with S1XX models.

AVAILABLE WITH:

Models: S101, S102, S112,S201, S202

Terminations:02, 04 and 08

Actuators: 03, 04, 09, 12* and 13**12 and 13 actuators available with S201, S202 and S602 models only.PC MOUNTING

For mounting information, see

TERMINATIONS section, page J-30.

AVAILABLE WITH:

Models:S701, S702,and S802

Terminations: 04, 07, 57 and WC Actuators:C2, C3, C5 and 03

S202032TS03BE中文资料

S202032TS03BE中文资料

S l i d e

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

PANEL MOUNTING

S202032TS03BE中文资料

S202032TS03BE中文资料

TS

PANEL WITH MOUNTING EARS

AVAILABLE WITH:

Models:S201, S202, and S602Terminations:All

Actuators:03, 04 and 12.

S202031TS03Q

DPDT

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

S202032TS03BE中文资料

Slide

NOTE:Any models supplied with Q, B or G contact material are RoHS compliant.

For the latest information regarding RoHS compliance, please go to: http://www.wendangku.net/doc/b8f2e4b6f121dd36a32d82da.html/rohs.

S202032TS03BE中文资料

EPOXY

.075 MAX.(1,91)

E

EPOXY SEAL

NONE

NO SEAL

N

RED RECTANGLE ON ONE END

M

ON-OFF

L

ON

D

ON-OFF

NONE

NO MARKINGS

1CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.

2CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).3

CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.

NOTE:Top plate markings are available with ‘S2’ mounting style only. The marking color

on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: marking color is black, standard). The marking color on all top plates with ‘N’ marking option is red, standard.Other marking colors are available, consult Customer Service Center.

Note:Orientation of actuator markings and terminals.

All models

with all options when ordered with ‘G’ or ‘Q’ contact material.

NOTE:‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials.

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.