VE-48HME-K-HV-VD中文资料
s FEATURES
q UL, CSA, VDE recognized
q 1 form A (SPST-NO) or 1 form C (SPDT) contact
q
Low cost, miniature relay with big performance in small package
—Surge strength: 4,000 V or 6,000 V
q Slim type—meets high density mounting requirement q Wide operating range
q
Easy circuit design with completely separated terminal arrangement (coil and contact terminals)q
Plastic sealed type backfilled with nitrogen
(a)Series Name VE: VE Series
(b)Nominal Voltage Refer to the COIL DATA CHART (c)Contact Rating H : Heavy duty type (d)Contact Arrangement Nil : 1 form C (SPDT)M : 1 form A (SPST-NO)(e)Coil Type
Nil : Standard type
S : High sensitivity type
(f)
Contact Material (Rating)
Nil : Gold overlay silver-nickel (N.C.: 3 A, N.O.: 5 A)E : Silver-nickel (N.C.: 3 A, N.O.: 5 A)5: Silver alloy (N.C.: 5 A, N.O.: 5 A)(g)Enclosure K : Plastic sealed type
(h)Surge Strength Nil : Standard type (4,000 V)
HV: High dielectric strength type (6,000 V)(i)
Standard
VD: UL, CSA, VDE approved type
Note:Actual marking omits the hyphen (-) of (*)
s ORDERING INFORMATION
VE –
12H M S E –K –HV –VD [Example]
(a)(*)(b)
(c)(d)(e)(f)(g)(h)(i )
s SAFETY STANDARD AND FILE NUMBERS
UL508 (File No. E56140)
C22.2 No. 14 (File No. LR35579)
VDE0435
Please note that UL/CSA ratings may differ from the standard ratings.
Type Nominal voltage Contact rating VE-H 5 to 48 VDC Normally open:
1/14 HP 125 VAC/250 VAC
5 A 30 VDC/250 VAC, resistive
Pilot duty D300
Normally close:
1/14 HP 125 VAC/250 VAC
3 A 30 VDC/250 VAC, resistive
Pilot duty D150
VE-HM 5 to 48 VDC1/12 HP 125 VAC/250 VAC
5 A 30 VDC/250 VAC, resistive
Pilot duty D300
VE-H5 5 to 48 VDC Normally open:
VE-HM51/10 HP 125 VAC/250 VAC
5 A 30 VDC/250 VAC, resistive
Pilot duty D300
Normally close:
1/14 HP 125 VAC/250 VAC
5 A 30 VDC/250 VAC, resistive
Item
VE-( ) HME-K VE-( ) HE-K VE-( ) HM5-K
VE-( ) H5-K
VE-( ) HM-K
VE-( ) H-K
Contact
Arrangement 1 form A (SPST-NO) 1 form C (SPDT) 1 form A (SPST-NO) 1 form C (SPDT)Material Gold overlay silver alloy Silver-cadmium oxide alloy Style
Single
Resistance (initial) (at 1 A 6 VDC) Maximum 70 m ? (VE-HM, H) Maximum 200 m ?
Maximum 100 m ? (VE-HME, HE)Rating (resistive)
5 A 250 VAC 5 A 250 VAC (N.O.) 5 A 250 VAC 3 A 250 VAC (N.C.)Maximum Carrying Current 7 A
Maximum Switching Power 1,250 VA 1,250 VA (N.O.) 1,250 VA 750 VA (N.C.)Maximum Switching Voltage 250 VAC, 150 VDC
Maximum Switching Current 5 A 5 A (N.O.) 5 A 3 A (N.C.)
Minimum Switching Load*1
10 mA, 5 VDC (VE-HM, H), 100 mA 5 VDC (VE-HME, HE, HM5, H5)Coil
Nominal Power (at 20°C)Standard type: 0.36 W. High sensitivity type: 0.25 W Operate Power (at 20°C)Standard type: 0.177 W. High sensitivity type: 0.13 W
Operating Temperature
Standard: –40°C to +85°C. High sensitivity: –40°C to +90°C (no frost)Time Value Operate (at nominal voltage)Maximum 10 ms Release (at nominal voltage)Maximum 5 ms Insulation
Resistance (at 500 VDC)
Minimum 1,000 M ?
between open
1,000 VAC 1 minute 750 VAC 1 minute 1,000 VAC 1 minute 750 VAC 1 minute
Dielectric contacts
Strength between coil
2,000 VAC 1 minute
and contacts Surge Strength
Standard type: 4,000 V (at 2 × 10 μs)
High dielectric strength type: 6,000 V (at 2 × 10 μs)Life Mechanical
1 × 107 operations minimum
Electrical (at Rating)Standard Type: 1 × 105 ops. min. High sensitivity type: 5 × 104 ops. min.Other
Vibration Misoperation 10 to 55 Hz (double amplitude of 3.3 mm)Resistance
Endurance 10 to 55 Hz (double amplitude of 3.3 mm)Shock Misoperation 100 m/s 2 (11 ±1 ms)Resistance
Endurance 500 m/s 2 (6 ±1 ms)Weight
Approximately 8 g
s SPECIFICATIONS
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual
load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
s COIL DATA CHART
MODEL
Nominal Coil Must Must Nominal VE-( ) HM VE-( ) HME VE-( ) HM5voltage resistance operate release power VE-( ) H VE-( ) HE VE-( ) H5(±10%)voltage voltage VE- 5H (M) (E)-K
VE- 5H (M) (E) 5-K 5 VDC 69 ? 3.5 VDC 0.25 VDC 360 mW VE- 6H (M) (E)-K VE- 6H (M) (E) 5-K 6 VDC
100
? 4.2 VDC 0.3 VDC 360 mW VE- 9H (M) (E)-K VE- 9H (M) (E) 5-K 9 VDC 225 ? 6.3 VDC 0.45 VDC 360 mW VE 12H (M) (E)-K VE-12H (M) (E) 5-K 12 VDC 400 ? 8.4 VDC 0.6 VDC 360 mW VE-18H (M) (E)-K VE-18H (M) (E) 5-K 18 VDC 900 ?12.6 VDC 0.9 VDC 360 mW VE-24H (M) (E)-K VE-24H (M) (E) 5-K 24 VDC 1,600 ?16.8 VDC 1.2 VDC 360 mW VE-48H (M) (E)-K VE-48H (M) (E) 5-K 48 VDC 6,400 ?33.6 VDC 2.4 VDC 360 mW VE- 5H (M) S (E)-K
VE- 5H (M) S5-K 5 VDC 100 ? 3.6 VDC 0.25 VDC 250 mW VE- 6H (M) S (E)-K VE- 6H (M) S5-K 6 VDC 145 ? 4.3 VDC 0.3 VDC 250 mW VE- 9H (M) S (E)-K VE- 9H (M) S5-K 9 VDC 325 ? 6.5 VDC 0.45 VDC 250 mW VE 12H (M) S (E)-K VE-12H (M) S5-K 12 VDC 575 ? 8.6 VDC 0.6 VDC 250 mW VE-18H (M) S (E)-K VE-18H (M) S5-K 18 VDC 1,300 ?13.0 VDC 0.9 VDC 250 mW VE-24H (M) S (E)-K VE-24H (M) S5-K 24 VDC 2,310 ?17.3 VDC 1.2 VDC 250 mW VE-48H (M) S (E)-K
VE-48H (M) S5-K
48 VDC
9,220 ?
34.7 VDC
2.4 VDC
250 mW
H i g h S e n s i t i v e T y p e
S t a n d a r d T y p e
s CHARACTERISTIC DATA
Note: All values in the table are measured at 20 °C.
s REFERENCE DATA
s DIMENSIONS
VE-M type VE type q Dimensions q Schematics
(BOTTOM VIEW)
q PC board mounting
hole layout
(BOTTOM VIEW)
Unit: mm
Japan
Fujitsu Takamisawa Component Limited
Global Marketing and Sales
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
North and South America
Fujitsu Takamisawa America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Europe
Fujitsu Takamisawa Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Asia Pacific
Fujitsu Takamisawa Asia Pacific Pte. Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Fujitsu Takamisawa
International
Headquarter
Offices
https://www.wendangku.net/doc/be11913229.html,