BEAM BOTTOM WOOD SQUARE ROOT NUMBER

beam bottom wood square root number: 3
7, wood square section specifications: 50 * 80 mm
8, beam bottom wood square distance: 175 mm
9, small beam bottom bar: phi 48 x 3.5 steel pipe
10, small bar spacing: 500 mm
11, beam side stud space: 1 m
12, beam side span poling direction space (less than) : 1 m
13, poling basis: 50 mm thick concrete floor with wooden planks
14, Max tonetto jacking beam type: no beam
15, beam bottom rod span direction spacing (less than) : 1 m
16, beam bottom rod transverse spacing: 0.33 m
17, horizontal bar interval: 1.5 m
18, the top plate under 2 level step length is adjusted for: 0.95 m
19, level rod assembly steps (including sweep the floor and at the top of the encryption area, do not contain additional levels under beam) : step 4 20, sweeping stem from the body surface: on the basis of 200 mm
Under 21, plate rack body contains set-up height adjustable bracket (to the top, buckle plate thickness) : 3.91 m
22, the bottom of the beam top stud with set-up height adjustable bracket () to the top, buckle plate thickness: 3.31 m
23, the support frame body calculation height (equal to the height) : 4.2 m
24, poling under plate support free end height: 400 mm
25 and under beam poling support free end height: 400 mm
26, beam under whether additional horizontal bar: additional a horizontal bar, the beam under the topside poling free end height control within 500 Third, lateral beam template parameters:
1, the beam breadth: 400 mm
2, beam height: 700 mm