?
Operating Temperature Range-40 ~ +85°C-25 ~ +85°C Rated Voltage Range10 ~ 250Vdc315 ~ 450Vdc Rated Capacitance Range180 ~ 82,000μF56 ~ 1,000μF
Capacitance Tolerance±20% (M)
Max. Leakage Current (μA)
After 5 minutes (20°C)
3 x C(μF)V
Max. Tan δ
at 120Hz/20°C
W.V. (Vdc)10162535506380100160~400420~450
Tan δ max.0.550.500.450.400.350.300.250.200.150.25 Surge Voltage
W.V. (Vdc)1016
2535506380100160180
S.V. (Vdc)132032446379100125200220
W.V. (Vdc)200220250315350385400420450-
S.V. (Vdc)250270300365400435450470500-
Ripple Current
Correction Factors
Frequency (Hz)50 (60)1205001K10K>-----
Multiplier
at 85°C
10 ~ 100Vdc0.90 1.00 1.05 1.10 1.15-----
160 ~ 250Vdc0.80 1.00 1.20 1.30 1.50-----
315 ~ 450Vdc0.80 1.00 1.20 1.25 1.40-----Low Temperature
Stability (10 to 250Vdc)
Temperature (°C)0-25-40-------Capacitance Change-5%-15%-30%-------Impedance Ratio 1.5312-------
Load Life Test 3,000 hours at +85°C Capacitance Change Within ±20% of initial measured value Tan δLess than 200% of speci? ed maximum value Leakage Current Less than speci? ed maximum value
Shelf Life Test 1,000 hours at +85°C
(no load)Capacitance Change Within ±20% of initial measured value Tan δLess than 200% of speci? ed maximum value Leakage Current Less than speci? ed maximum value
Surge Voltage Test
Per JIS-C-5141 (table #6, #4) Surge voltage applied: 30 seconds "On" and 5.5 minutes no voltage "Off"Capacitance Change Within ±20% of initial measured value Tan δLess than 200% of speci? ed maximum value Leakage Current Less than speci? ed maximum value
Soldering Effect Refer to JISC5102.8.5Capacitance Change Within ±10% of initial measured value Tan δLess than speci? ed maximum value Leakage Current Less than speci?
ed maximum value
Large Can Aluminum Electrolytic Capacitors NRLR Series FEATURES
? EXPANDED VALUE RANGE
? LONG LIFE AT +85°C (3,000 HOURS)
? HIGH RIPPLE CURRENT
? LOW PROFILE, HIGH DENSITY DESIGN
? SUITABLE FOR SWITCHING POWER SUPPLIES
SPECIFICATIONS
MECHANICAL CHARACTERISTICS:
1. Safety Vent:
The capacitors are provided with a pressure sensitive safety vent on the top of can. The vent is designed to rupture in the event that high internal gas pressure is developed by circuit mal f unc t ion or mis-use like reverse voltage.
2. Terminal Strength:
Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period
of 30 seconds.
NRLR 222 M 50V 20X25 S F
RoHS compliant
Lead Length (S=4mm, L=6mm)
Case Size (mm)
Voltage Rating
Tolerance Code
Capacitance Code
Series
PART NUMBER SYSTEM
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at https://www.wendangku.net/doc/c11024174.html,/precautions
If in doubt or uncertainty, please review your speci?c application - process details with NIC’s technical support personnel: tpmg@https://www.wendangku.net/doc/c11024174.html,
Notice for Mounting
The space from the top of the can shall be more than (3mm) from chassis or
other construction materials so that safety vent has room to expand in case
of emer g en c y.
Recommended PC Board Mounting Holes: Sleeve Color: Dark Blue
Can Top Safety Vent
Insulation Sleeve and Minus
Polarity Marking
D+1
Max.
L ± 2 4.0 ± 1
or
6.3 ± 1
10
(-)
(+)
SAFETY VENT
?= 2
Chassis
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
Large Can Aluminum Electrolytic Capacitors NRLR Series
Large Can Aluminum Electrolytic Capacitors NRLR Series
Large Can Aluminum Electrolytic Capacitors NRLR Series
Large Can Aluminum Electrolytic Capacitors NRLR Series
Large Can Aluminum Electrolytic Capacitors NRLR Series
Large Can Aluminum Electrolytic Capacitors NRLR Series
Large Can Aluminum Electrolytic Capacitors NRLR Series
Large Can Aluminum Electrolytic Capacitors NRLR Series
Large Can Aluminum Electrolytic Capacitors NRLR Series STANDARD PRODUCT LIST, CASE SIZE AND SPECIFICATIONS
Large Can Aluminum Electrolytic Capacitors NRLR Series
6.0mm - Optional Lead Length