9806H最新升级方法

1、基本方法还是和以前一样，先下载bsccb.bin,sccb.bin,sccb_fw.bin,sccb_sv.bin然后重启
2、检查是否有ATLCI，还要检查用户端口是否空闲状态，如果ATLCI在二槽位，用以下命令查看，如果是IDLE状态才能升级ATLCI_fwbin,如果是其它状态，必须要现场关电保证是IDLE状态才能下载，否则单板只能返修。
YB_WanFuHuaYuan_B_8_1F-2(ag)# get-slcstatus beginslot 2

idlenum 141 busynum 1 blocknum 50

circuit status
2-0 IDLE
2-1 IDLE
2-2 IDLE
2-3 IDLE
2-4 IDLE
2-5 IDLE
2-6 IDLE
2-7 IDLE
2-8 IDLE
2-9 IDLE
2-10 IDLE
2-11 IDLE
2-12 IDLE
2-13 IDLE
2-14 IDLE
2-15 IDLE
2-16 IDLE
2-17 IDLE
3、如果是IDEL，请下载ATLCI_FW.BIN,然后现场掉电重启，检查如果是-03表示ATLCI升级成功
YB_WanFuHuaYuan_B_8_1F-2# show card
Slot Shelf Type Port HardVer SoftVer Status
----------------------------------------------------------------------
1 1 ATLCZ 48 081102-01 V2.1.0P3 Inservice
2 1 ATLCI 48 081001-03 V2.1.0P3 Inservice
3 1 ATLCI 48 081001-03 V2.1.0P3 Inservice
4 1 ATLCI 48 081001-03 V2.1.0P3 Inservice
5 1 SCCBK 2 090100 V2.1.0P3 Inservice
4、如果主控板是SCCBK，检查PON子卡版本，如果是ver e7.14.0.0，必须升级EPTK_FW.BIN,重启PON子卡新版本为ver e6.14.0.0
YB_WanFuHuaYuan_B_8_1F-2# show pon version
EPON-FW VERSION : ver e7.14.0.0
然后执行 reset sub-card pon
YB_WanFuHuaYuan_B_8_1F-2# show pon version
EPON-FW VERSION : ver e6.14.0.0
5、针对SS双归属问题还要打补丁,不需要重启9806
YB_WanFuHuaYuan_B_8_1F-2# patch load SCCBV210P3T2_r4.pat---第一步加载补丁
YB_WanFuHuaYuan_B_8_1F-2# patch active SCCBV210P3T2_r4.pat---第二步激活补丁
YB_WanFuHuaYuan_B_8_1F-2# patch save SCCBV210P3T2_r4.pat---第三步保存补丁
5、检查是否打下补丁用show patch检查。
YB_WanFuHuaYuan_B_8_1F-2# show patch
index patch name operate time patch state run time

-------------

-------------------------------------------------------------------
1 SCCBV210P3T2_r4.pat 2006-06-10 19:50:22 AUTORUN 2(d)20(h)51(m)17(
s)

onu升级地址：198.20.160.133 用户名：uni 密码：uni